Dvigalio kraštų profiliuotojas pirkti naudotą (49)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6024 TECHNINIAI DUOMENYS - pagrindinis variklis 2,9 kW - veleno variklis 0,75 kW - vežimėlio eigą variklis 0,75 kW - maitinimas 380V - matmenys ilgis/plotis/aukštis 1600x1100x1200mm - svoris 891kg Įranga: – 2 staliukai po 300x340 mm – pneumatiniai spaustuvai – dviem plokštumom reguliuojami stalai – ant stalų galima gaminti išilginius ir apvalius kaiščius – stalo ir veleno greičiai reguliuojami mechaniškai – stalai reguliuojami aukštyn/žemyn – kaiščio pločio reguliavimas Grynasis kaina: 16 900 PLN Grynasis kaina: 4 020 EUR Godpfsy Rr Diox Ah Ajit Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams, kaina gali keistis)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6969 TECHNINIAI DUOMENYS Diskinis pjūklas: - didžiausias disko skersmuo: 300 mm - velenas: 30 mm - didžiausias pjovimo aukštis: 60 mm - reguliuojamas diskas pirmyn/atgal - variklis 2,4 kW Frezeris: statramo velenas: - veleno skersmuo: 40 mm - darbinis veleno aukštis: 190 mm - fiksuojamas velenas - didžiausias frezos skersmuo: 360 mm - variklis 7,5 kW - 2 sukimosi greičiai - medžiagos prispaudėjas - šoninė vežimėlis reguliuojamas aukštyn/žemyn, pirmyn/atgal - kampinė liniuote - ištraukiamas stalo palaikiklis - rankinis vežimėlio pastūmimas - ištraukimo angų skersmuo: 80 mm, 160 mm - matmenys ilgis/plotis/aukštis: 1910x1960x1800 mm - svoris: 830 kg – pagaminta Lenkijoje – DTR dokumentacija – viršutinis valdymo pultas – naudota statramė, labai gera būklė Grynoji kaina: 13 900 PLN Grynoji kaina: 3 300 EUR Grynoji kaina skaičiuojama pagal kursą 4,2 PLN/EUR Godpoy Rrxmjfx Ah Ajit (kai stipriai keičiasi kursas, kaina gali būti peržiūrima)

Būklė: labai geros būklės (naudotas), Katalogo numeris 6462 TECHNINIAI DUOMENYS - variklis 2,2 kW - maitinimas 380V - galvutės pastūmos variklis 0,9 kW - ištraukimo vamzdžio skersmuo 2x100 mm - matmenys ilgis/plotis/aukštis 1330x1100x1220 mm - svoris 920 kg Įranga komplektuojama: – 2 stalai su kampuotais, išmatavimai 385x330 mm – 2 pneumatiniai prispaudėjai – stalai reguliuojami kampu dviem plokštumomis – galimybė daryti išilginį ir apvalų kaištį ant stalų – stalai reguliuojami aukštyn/žemyn – kaiščio pločio reguliavimas – centrinis tepimas – nedažyta – itališka gamyba – naudota kaiščiavimo staklė, labai gera būklė Grynasis kaina: 23 900 PLN Godpfxsyyyk No Ah Asit Grynasis kaina: 5 690 EUR Grynasis kaina paskaičiuota pagal kursą 4,2 PLN/EUR (Esant didesniems valiutos svyravimams kaina gali keistis)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7758 TECHNINIAI DUOMENYS Diskinis pjūklas: Gjdpoyyy Dvofx Ah Ajit - Didžiausias disko skersmuo 350mm - Velenas 30mm - Velenas fiksuojamas - Disko reguliavimas priekin/atgal, aukštyn/žemyn, kampas - Disko apsauga - Variklis 1,1kW - Nusiurbimo antgalio skersmuo 80mm Frezavimo staklės: - Frezavimo velenas: - Veleno skersmuo 40mm - Darbinis veleno aukštis 150mm - Velenas fiksuojamas - Maksimalus frezos skersmuo 350mm - 2 sukimosi greičiai: 3000, 4500aps./min - Variklis apie 5,5kW - Stabdis - Šoninis vežimėlis – rankinis pastūma - Vežimėlio matmenys ilgis/plotis 1180x600mm - Kampinis liniuotė - Pneumatinis prispaudėjas - Nusiurbimo antgalių skersmuo 125mm - Matmenys ilgis/plotis/aukštis 1750/2600 (siuntimui 1200)/1400mm - Svoris 715kg PRIVALUMAI – Pagaminta Vokietijoje – Labai gera būklė – Naudota frezavimo staklė Kaina be PVM: 13 900 PLN Kaina be PVM: 3 300 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1985, FOD double-sided parquet end-matching machine DOUBLE-SIDED for parquet production, equipped with a surface equalizing saw and a vertical cutter for groove production Gijdpfxeilc Nce Ah Aet

Būklė: naudotas, Staklų ilginio ir skersinio profiliavimo mašina parketui. Varikliai 6+6. Gisdsy Hmlyepfx Ah Ast

Būklė: labai geros būklės (naudotas), RĄSTINIŲ NAMELIŲ FREZAVIMO STAKLĖS SKIRTOS KAMPINIŲ SUJUNGIMŲ GAMYBAI FREZUOJANT KETURIAS RĄSTO PUSĖS. MAKSIMALUS RĄSTO ILGIS 6000 MM (ATSTUMAS TARP ATRAMŲ: 5770 MM). MINIMALUS ILGIS 450 MM. 4X FREZAVIMO GALVOS VIENAI PUSEI (2 PUSĖS). PAJĖGUMAS – 3 CIKLAI PER MINUTĘ. MAKSIMALUS PLOTIS 250 MM. MAKSIMALUS STORIS 140 MM. KOMPLEKTUOJAMA SU REGULIUOJAMU ĮRANKIŲ RINKINIU, TINKAMU 34-70 MM SUJUNGIMAMS. 8X 4 KW FREZAVIMO VARIKLIAI. SKAITMENINĖ ILGIO MATAVIMO SISTEMA SU RODYMLE. PAPRASTAS ELEKTRONINIS VALDYMAS (BE PLC). 5,5 KW PADAVIMO VARIKLIS. PAGAL POREIKĮ GALIMA TIEKTI SU RŪŠIAVIMO ĮRENGINIU. MODIFIKUOTA KAIRĖ PUSĖ LEIDŽIA FORMUOTI PAGEIDAUJAMO ILGIO STOGO IŠKYŠĄ. LABAI KOKYBIŠKAS KAMPINIŲ SUJUNGIMŲ FORMAVIMAS. KAINA NUIMTOS IR PAKRAUTOS Į SUNKVEŽIMĮ. Gedpfx Ajy Hb Uish Aeit

Būklė: visiškai atnaujintas (naudotas), COMPLETTE ODER TEILE DER CELASCHI DET ZUFEEDERKETTEN, VOLLSTÄNDIG ÜBERHOLT Godpov Hmyxjfx Ah Aoit

Būklė: geras (naudotas), Automatic double-sided tenoning and profiling machine Celaschi 5 units per side Gisdetykxpjpfx Ah Ajt

Būklė: labai geros būklės (naudotas), Solo Machine - Universal Machine (First & Second in a production line) Second DEP in the line X10023 Giedoyz Si Hepfx Ah Ajt Electronic control OMRON Separate control panel and operator console Protective and soundproof cabin No. 3+3 vertical support columns for working units As the second machine, it accepts panels with a depth of 1900 mm Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): 6 (approx.) Max. useful working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4-24 Total power Kw: 65 No. 3 working units (for each side of the machine): - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - Free space

Būklė: labai geros būklės (naudotas), Solo machine - Universal machine (First & Second in a machine line) First DEP in line X10023 Godpfx Ahoyz Siaj Aoit Electronic control OMRON Separate control panel and operator console Protective and soundproof cabin No. 2+2 vertical support columns for working units Min. usable working width (mm): 300 Max. usable working width (mm): 2000 Min. usable working thickness (mm): 6 Max. usable working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4–24 Total installed power (kW): 60 No. 4 working units (per machine side): - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - No. 1 standard universal milling unit (1.5 kW at 1470 rpm)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Line performance (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle formation: max. 100 pieces/min • Packaging: up to 12 bundles/min • Palletizing: up to 12 cycles/min Feeding & Cutting Gisdpfx Asywxrash Aet 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeding System Vacuum gantry for raw board loading (fixed edge right) • Workpiece weight up to 100 kg • Throughput up to 5 cycles/min • Pallet return and light barrier safeguarding 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets • Maximum stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Deco Alignment Station Alignment of panels for further processing according to decor orientation 4. Multiblade Circular Saw K34/G/2200 Longitudinal division with edge chipping • Feed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Station HPp11 Continuous cross-cutting with pressure beam • Cutting width 2,200 mm • Pneumatic upper pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turnover unit (2×8 compartments) for separation of multiples • Conveyor speed 10–50 m/min 8. BARGSTEDT Angular Transfer (TW) 90° transfer with belt conveyors, feed rate up to 130 m/min For transfer to the profiling line Profile Processing (sound-proofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge machining • 6 units per side • 6.6 kW per unit • Tool dia. up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical power layout • Integrated edge sealing 11. Sonolit Acoustic Enclosure Enclosure for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turnover Unit Workpiece turnover in continuous flow • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Formation Station Automatic bundle formation with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Throughput 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and supply of cartons before packaging • Performance up to 12 bundles/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Up to 10 bundles/min guaranteed 17. Labelling Station Automatic bundle labelling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapper Fully automatic film wrapping with shrink tunnel • Connected load 36–40 kW • Throughput up to 12 bundles/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic cross stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Output max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet building with vacuum suction cups • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic supply of empty pallets for end palletizing

Būklė: labai geros būklės (naudotas), 4-sided DOUBLE END TENONER LINE currently configured for INTERIOR DOORS, consisting of the following machines: X10023A) CELASCHI powered roller conveyor for feeding X10023B) CELASCHI DOUBLE END TENONER Model TSA 3 B 480 A installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END TENONER Model TSA 2 B 360 Giedpfx Ahewzmbqj Aet installed total power: 65 kW

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Torwegge Double-End Tenoner, Year of Manufacture The machine offered is being sold as a used unit. The sale is made with the exclusion of any liability for material defects. The machine is sold as seen, with all warranties excluded. The seller does not assume any guarantee for functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transportation Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks associated with dismantling, loading, and transport. Gedpfx Ahjywfiro Asit Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other information No liability is assumed for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is provided to the best of our knowledge but without guarantee.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for the finishing of solid wood furniture components. The machine combines several processing steps in a single line: • End trimming & sizing • End drilling Gsdpeyk Empefx Ah Aoit • Vertical and horizontal drilling • CNC routing • Glue application & glue injection • Dowel insertion Production capacity: 14–16 parts/minute Technical Data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control: CNC CNI with touchscreen Machine Configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with light sensor • Infeed via servo-driven push shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working Stations 1st Station – Scoring/Trimming B 2/B 8 • 2× Motor 3 kW • 7600 rpm • Max. saw blade Ø 125 + 180 mm 2nd Station – End drilling M • Motor 3 kW • 5000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd Station – CNC vertical routing J 3D • Electric motor 8 kW • 9000–12000 rpm • Automatic X axis, manual Y/Z • Tool holder HSK63C 4th Station – CNC vertical routing J 3D (second unit) • Same specification as Station 3 5A Station – Glue injection R 4 • Electronically adjustable glue quantity • 2+2 glue injectors • Angle ±30° 5B Station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum distance 16 mm • Pneumatic stroke 80 mm Outfeed Area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× Vertical drilling units • 3× Horizontal drilling units • Swivel table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproofing cabin • Safety fence • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touchpanel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with the machine. Price: €290,000 excl. VAT, transport, and disassembly

Būklė: naudotas, mašinos/transporto priemonės numeris: 007960, Formato diskinis pjūklas: 1 ir 2 mašinos Maksimalus padavimo greitis: 36 m/min Gijdpfx Aewl Dnijh Ast Atstumas tarp griebtuvų: 450 mm

Būklė: naudotas, mašinos/transporto priemonės numeris: 006064, Formatinė diskinė pjūklas: 1 ir 2 mašina Didžiausias plokštės aukštis: 85 mm Didžiausias padavimo greitis: 26 m/min Giodpfx Ahslw A D To Aet Atstumas tarp kablių: 1000 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Single-sided tenoning machine. End-trimming saw, vertical milling cutter. Sliding table on guides. Heavy-duty cast iron construction, stable. Adjustable milling heads at an angle. Machine equipped with a pneumatic clamping bar. Manual feed. Gisdevfv A Hopfx Ah Aet

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3928 A, darbinis plotis: 250 mm, Įranga: dokumentacija / vadovas, Variklio galia: 30 kW Įrengtas su: Hnebni Iow A A E Is Rp Tot 1+1 pjūklai 1+1 frezavimo blokas 1+1 gręžimo blokas Maks. ilgis: 1000 mm Maks. plotis: 250 mm Maks. storis: 50 mm dvigubas zaplėpavimo įrenginys, dvigubas gręžimo blokas, žingsnis po žingsnio Gsdoxix Tfepfx Ah Aeit

Būklė: visiškai atnaujintas (naudotas), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET Giedpfx Ahedvlcys Ajt GEBRAUCHT, KOMPLETT GENERALÜBERHOLT

Būklė: labai geros būklės (naudotas), I am selling a double-end profiling milling machine CELASCHI TSA 300. Working width up to 3000 mm Feed speed 3–18 m/min Configuration left side / fixed: - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Configuration right side / movable: - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Godpfxovxu Uhe Ah Ajit Material hold-down conveyor with top-feed system. Throughfeed machine. Condition: Very good. Fully operational. Available immediately.

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Configuration left side / fixed: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW 1 + 1 pcs. grooving saw units front + rear with synchronised feed Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW 1 pc. special milling unit top / 5.5 kW Material pressure conveyor with overhead feed. Special construction, also suitable for edge dimensioning. Through-feed machine. Giedpfxeib A E Ae Ah Ajt Siemens Simatic control panel. Condition: Very good. Available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, I am selling a double-end profiler milling machine SCM CONCEPT NT. Working width up to 3000mm. Configuration left side / fixed: 1 pc. cutting unit 1 pc. milling unit 1 pc. movable jump milling unit Configuration right side / movable: 1 pc. cutting unit 1 pc. milling unit Godpfotv Rxbsx Ah Ajit 1 pc. movable jump milling unit Top pressure conveyor belt for material feed. Through-feed machine. Condition: Very good. Immediately available.

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), I am selling a double-end profiler milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Material pressure belt with top feed. Through-feed machine. Condition: Very good. Available immediately. Machine is assembled, can be switched on right away. Price per unit. 2 units in stock, available immediately. Giedsizrf Nopfx Ah Aet

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 5350 x 4650 x 1820 mm Weight: 7500 kg Total power requirement: 47 kW Double-End Tenoner INDUSTRY SERIES 8030H - 8 machining units - Working width min./max.: 300 - 3000 mm - Working height min./max.: 10 - 120 mm - Feed rate steplessly adjustable: 6 - 36 m/min - Feed motor: 4.0 kW - Width adjustment motor: 0.75 kW - Total connected load: 47.0 kW - Voltage: 400 V / 50 Hz - Extraction ports: Ø 8 x 120 mm - PLC + touch screen control - Transport chain with cams, pitch 500 mm - Infeed length: 1500 mm for panels / flooring / furniture boards / doors Scoring saw: - Motor: 2.2 kW - Speed: 3000 rpm - Saw blade arbor Ø 30 mm - Saw blade Ø min./max.: 160 - 200 mm Cross-cut saw (chipper): - Motor: 5.5 kW - Speed: 3000 rpm - Saw blade arbor Ø 30 mm - Saw blade Ø min./max.: 200 - 300 mm First milling spindle: - Motor: 5.5 kW - Speed: 7500 rpm - Spindle arbor Ø 40 mm - Tool Ø min./max.: 108 - 180 mm - Jumping (pneumatically controlled infeed and retraction) Second milling spindle: - Motor: 7.5 kW - Speed: 7500 rpm - Spindle arbor Ø 40 mm - Tool Ø min./max.: 108 - 180 mm - Swivelling +60° to -30° Gijdpovz Hdyofx Ah Aot Dimensions: L=5350, W=4650, H=1820 mm Weight: 7500 kg