Kraštų apdorojimo mašinos

Stefani Evolution SSB

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) Hjdpfxoiidm Nj Apysfn - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Hjdpfx Asgwbbqopysfn Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: naujas, Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Hfodpfxoi Hplke Apyjn Weight: 850 kg

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Hjdpfx Aoi Hn Sropysfn Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), Automatic slot mortising machine with two tables and oscillating ends BALESTRINI 2CAP Maximum tenon length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Hedpjgmucpsfx Apyjfn Weight: 500 kg

Būklė: naudotas, mašinos/transporto priemonės numeris: 006290, Maksimalus apdorojamo ploto plotis: 1300 mm Maksimalus apdorojamo ploto aukštis: 100 mm Hfjdsu A Evhjpfx Apyen Valčių skaičius: 4

Būklė: naujas, Tipas: 400C Obliavimo staklės: Stalo matmenys: 400 x 1800 mm Peilių veleno skersmuo: 70 mm Peilių veleno apsisukimų dažnis: 5700 aps./min. 3 peiliai: 400 x 20 x 3 mm Maks. stalo reguliavimo aukštis: 4 mm Storis: Stalo matmenys: 400 x 760 mm Maks. pjovimo gylis: 4 mm Padavimo greitis: 7 m/min Peilių veleno apsisukimų dažnis: 5700 aps./min. Maksimalus darbinis aukštis: 220 mm Minimalus darbinis aukštis: 4 mm Hedpfxod Nl Sfe Apyefn Gręžimo ir kaltavimo funkcija: Stalo matmenys: 250 x 500 mm Išilginis eiga: 205 mm Skersinis eiga: 95 mm Griebtuvas (SX): 16 mm Griebtuvo apsisukimų dažnis: 5700 aps./min. Variklis: 3 kW Priedai: serviso raktai, apsaugos ant kaltavimo griebtuvo, obliavimo liniuotė. Svoris: 390 kg

Būklė: naudotas, Gamybos metai: 2014, ruošinio svoris (maks.): 25 000 kg, bendras ilgis: 10 000 mm, bendras aukštis: 6 000 mm, bendras plotis: 10 000 mm, bendras svoris: 60 000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC vertikalus tekinimo centras Modernizacija: 2014 m. atlikta modernizacija, įdiegta „Siemens SINUMERIK 840D SL“ valdymo sistema. Darbinis plotas: Tiekiamo ruošinio skersmuo: 2800 mm Maksimalus apsisukimo skersmuo / tekinimo skersmuo: 3000 mm Maksimali stalo apkrova: 25 000 kg Maksimalus tekinimo aukštis: apie 2100 mm X ašies eiga: ±1550 mm Z ašies eiga / pagrindinio stūmoklio eiga: 1500 mm Pagrindinis variklis ir verpstės: Pagrindinis variklis: „Siemens“ pagrindinis variklis Variklio galia: 130 kW Maksimalus verpstės sukimosi greitis: 4500 aps./min. Hfsdpszmkzpjfx Apyon Darbo režimas: S6, 40 % Įranga: 2 vertikalios verpstės Įrankių keitiklis ir papildoma įranga: 2 automatiniai įrankių keitikliai Aušinimo ir tepimo sistema Skiedrų išvežimo sistema Alyvos rūko ištraukimo sistema 2 atskiri hidrauliniai agregatai Veikimo valandos: apie 12 571 valanda, pagal mechaninį valandų skaitiklį Stalo skersmuo: 2800 mm Valdymas: „Siemens SINUMERIK 840D SL“ Didžiausia detalės svoris: 25 000 kg Apsisukimo skersmuo: 3000 mm Maksimalus tekinimo aukštis: 2100 mm Apytikslis svoris: 60 000 kg Matmenys (ilgis x plotis x aukštis): apie 10000 x 10000 x 6000 mm Pagaminimo metai: 2014 Būklė: gera Apmokėjimo sąlygos: 100 % išankstinis apmokėjimas prieš atsiėmimą Pristatymo sąlygos: EXW (nuo gamyklos) Įrenginys prijungtas prie elektros: ne

Būklė: geras (naudotas), Gamybos metai: 2017, DIGITALLY CONTROLLED EDGE BANDING MACHINE WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm Thickness 10 to 45 mm with use of corner rounding unit - Workpiece length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (coil): 0.4 to 3 mm without corner rounding Max. 3 mm with use of corner rounding unit - Edge thickness (strip): max 6 mm without corner rounding Max. 3 mm with use of corner rounding unit - Edge width: panel thickness +2 mm each side - Feed speed: 11 m/min - Panel spacing: 600 mm - Panel overhang (relative to chain conveyor): 30 mm MACHINE CONFIGURATION: - StarTouch control - Barcode reading preparation - Ø800 mm coil holder Hfjdpjrx S Ipjfx Apysn - Front extension support - Easy Size: digital setting of infeed fence and working height - Anti-adhesive spraying unit - Edge trimmer (RT-V Rectifier) 12000 rpm - Infrared panel pre-heating at infeed - Gluing unit (VC-VM) with interchangeable glue pot Capacity 1 kg pellets. Heating time 12 min Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers including 1 motorized and time-controlled roller - End trimming aggregate, tiltable 0-20° 12000 rpm - Top/bottom flush trimming aggregate with digital positioning with copying device. 2 mm radius (or chamfer) cutter 12000 rpm - Corner rounding unit R2mm, digitally positioned, 12000 rpm - Top/bottom radius scrapers R1 & R2 mm, digitally positioned - Top/bottom straight scrapers - Edge finishing spray device (nebulizer) OTHER FEATURES: - Trimmer group motors: 2x 2 kW - Cutting motors: 2x 0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming (milling) motors: 2x 0.65 kW - CE Marked - Lockable disconnect switch, emergency stops - Power supply: 380V, 3-phase, 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m3/h Trimming: 360 m3/h Scrapers: 2x 360 m3/h Maximum in-operation footprint: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Būklė: labai geros būklės (naudotas), COMPLETE DOUBLE-SIDED EDGE-AND-PROFILE PROCESSING LINE (including SOFTFORMING), with through-feed drilling machines, splitter, and high-speed automated conveyor technology. Configured as follows: A) Feeding station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) Hfsdpfx Apsttgy Hjysn B) 1st double-sided edge-banding and profiling machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided edge-banding and profiling machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) G) CNC through-feed drilling machine "BIESSE" Techno FDT CN (with 2 horizontal drilling supports, 6 lower vertical drilling supports, and 3 upper vertical drilling supports) H) 3rd rotation station (90° straight or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT L) Destacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)