Frezavimo variklis kraštų apdirbimo staklėms

Perske VS 31.09-4

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) Fpedpsfi Tg Hofx Afdoh No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: naudotas, Gamybos metai: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for the 1st and 2nd pass of the panel Motorized mobile shoulder opening by N.C., mm 3000 Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Fedpfx Afepp Tkfodjph Guide rail with retractable pin (distance between pins: 500 mm) Squaring unit consisting of: - Anti-adhesive unit - Timer-controlled automatic anti-chip unit - Double scoring unit - Spare space for each group extension Glue unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlap cutting unit Corner rounding unit (FK rounding group) Edge scraper unit Glue scraper group Brush unit Anti-adhesive unit

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), An on-site inspection is possible. Fedeqvnmbopfx Afdeph

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam pitch (mm): 400 FORMAT PROCESSING (for each side): Protection cutter (pre-milling): 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (hot melt glue + pre-melter): A3 + SERVO Edge pressure zone "A" Edge magazine for rolls (compartment no. 2) End trimming unit HL 84 (2 x 0.22 kW) Fpedpfjp N D Ngjx Afdeh Pre-milling unit (2 x 0.55 kW) Milling unit 2 x 0.4 kW Contour copying milling unit FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling unit (electro-pneumatically controlled) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electro-pneumatically controlled) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (pneumatic) Finishing unit (flat scraper + polishing unit) FA 11

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a line Edge thickness in rolls (min/max) mm Edge thickness in strips / veneers (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Fpsdpfxofi Tkgj Afdjh Feed speed (adjustable) m/min 9 - 45 No transmission bar (Master & Slave systems) Top pressure driven by V-belt SIZING UNIT (for each side): Jointing cutter unit 75.30 (Kw 6.6 x 1) EDGE BANDING UNIT (for each side): Gluing station (P.U.R. adhesive + premelter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and shaped (softforming) edges mm 1,050 Edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (Kw 0.2 x 2) 40 m/min Pre-milling unit 08.055 (Kw 0.66 x 2) 0°-30° Milling unit 08.0582 (Kw 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (Kw 0.18 x 2)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, working width 250mm working height 140mm 8 heads 3 toothed rollers in the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100 m/min Fpjdpfx Asww H Rwsfdjh spindle diameter 50mm spindles supported on both sides feed on cardan shafts spindle speed 6000 rpm pneumatic pressure of feed rollers adjustment of heads in two axes cast iron frame

Būklė: naudotas, Gamybos metai: 1997, No. 3214 Sergiani LAS Plus Continuous Veneer Press Used, year of manufacture 1997, already dismantled and stored Automatic press with continuous operation for the production of plywood doors, finished doors (veneered doors, HPL, CPL), and pre-finished parquet (2 - 3 layers). The press allows workpieces to be loaded consecutively, while the pressure in the other chambers is kept constant. Operating the line requires up to two operators. This multi-level press ensures very high productivity. Average pressing time is approx. 3 minutes (180 seconds), distributed across 10 levels. Thus, the press opens every 18 seconds and processes a new board. The press is already dismantled and in storage. The system was in working order until dismantling. The previous owner produced 3-layer parquet with the system. The bottom layer was loaded manually. The middle layer consists of one piece, glued at the top and bottom, and automatically fed into the system. The top layer was also automatically loaded. Glue application machine / glue not included in delivery (available as an option) Levels: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Plate size: approx. 2500 x 1300 mm (L x W) Heating: hot water Application areas: Door manufacturing, multi-layer pressing, veneer and wood-based material processing Fjdpfx Afov Sthgjdjph High productivity with a capacity of up to 1,200 doors per shift (manufacturer’s information) Vacuum feeding system with double-track infeed roller conveyor, without gluing Scissor lift table with conveyor belt (belt approx. 2900 x 1000 mm L x W) Vacuum stacking station with outfeed roller conveyor Space requirements for press with feeding table: approx. 6500 x 2365 mm (L x W) Space requirements for the entire production line: approx. 25000 x 5710 mm (L x W) For sale on behalf of the customer, ex site near 5020 Salzburg (Austria), without transport or installation Loading and transport by us available as an option Errors in description and price reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical specifications, condition descriptions, year of manufacture, and scope of delivery according to manufacturer’s brochure and previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sale is “as inspected” Pictures and videos are for reference only and do not represent the exact scope of delivery Terms of payment: Prices plus statutory VAT; payment before collection or shipment Delivery terms: ex works

Būklė: naudotas, Automatic double-cell unloader without pit for use in edging and edge-banding lines Motorized panel infeed transfer Double automatic panel unloading station Suction cup system for panel handling Panel remover Panels can also be processed in double rows Fpjdpfsrzhftex Afdsh Usable panel width: 1300 mm Usable panel length: 3200 mm Vacuum pump Motorized transfers for loading panel stacks Motorized adjustment with automatic numerical control of horizontal suction cup support bars Sacrificial panel management system Programming and control system

Būklė: naudotas, Dimter Profipress L 2500 Pagaminimo metai: 2006 Matmenys: • Lamelių plotis (plokštėms): 30-150 mm • Storis: 11-60 mm • Įėjimo ilgis: 800-2500 mm • Plokštės plotis: kintamas, iki maks. 1300 mm • Pakrovimo plotis per ciklą: min. 650 mm / maks. 1300 mm • Integruotas hidraulinis blokas spaudimo jėgai ir hidrauliniams varikliams • Elektra: • Darbo įtampa: apie 400 V / 50 Hz • Elektros pajungimo galia 40 kW HF generatoriui: 56 kW Fjdpfxoyhggrs Afdoph

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, A CNC multi-spindle woodworking center by Reichenbacher with automatic beam table and vacuum pins is available. Travel range X1/X2: 8540mm, travel range Y1: 2500mm, travel range Z1: 480mm, swivel axis B: 180°, swivel axis C: 360°, X3-axis: underfloor drilling unit, U2-U10: beam movement 1-9 (gantry), axis speeds X/Y/Z: 60m/60m/20m/min, rotation speeds B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of beams: 9, suction cups per beam: 8, suction cup diameter: 100mm, beam positioning: +/-1000mm, min. beam spacing: 300mm, total number of vacuum pins: 72, vacuum pin stroke: 100mm, effective vacuum pin stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Overall system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection possible. Expected to be available from the end of September 2025. Fedpfx Afow Azuzsdoph