1350 mm pločio juostinė šlifavimo mašina MFA 6

HEESEMANN PONCEUSE DE SURFACE MFA 6 1350 mm

Būklė: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 Nedpfx Aju Afu Rscpocr - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Njdpfxei Ezx Ds Acpecr Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Ncsdpofi Tg Hefx Acpjr Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 300 mm, šlifavimo aukštis: 160 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 2 150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only show machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions Ncjdpfx Acswcqr Ajper - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubber-coated (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (drilled) for blower connection - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air blast nozzle - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, * Wemhöner Basic 1000 Plus - pagaminimo metai 2008 - labai gera būklė, mažai naudota * Tipas KT-MB-28/15-240 * Su automatine kaiščių sistema ir Inline apvertėju * 2 stalai su automatine Vario-Pin sistema * Su teflonine danga, skirta iš anksto klijuotai plėvelei * Plėvelės padėjimo sistema ant kaiščių stalo (iš anksto klijuota plėvelė) * Kaitinimo plokštės dydis: 2800 x 1500 mm * Maks. ruošinio dydis: 2.540 x 1.250 mm * Membrana: taip * Pjovimo stotis * Plėvelės laikymo paternosteris, 3,2 m aukščio, su 14 pakabinamų strypų * Siemens S7 PLC valdymas Nedpfjxbcudex Acpecr * Valdymo pultas su SIEMENS TP 270 jutikliniu ekranu (Touchscreen) * Automatinis membranos įtempimas * Įdiegta elektros galia 38,5 kW * Maksimalus kameros slėgis 6 bar * Maks. presavimo angos dydis 150 mm * 6 cilindrai, Ø 125 mm * Darbinė įtampa 400 V, 50/60 Hz * Preso kameros aukštis 40/60 mm * Maksimalus presavimo slėgis 2400 kN * Hidraulinės sistemos darbinis slėgis 320 bar

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, Parketo profiliavimo staklės išilginei šoninei apdirbai 5+5 variklių Greitis iki 60 m/min Nodpfoxwnhbsx Acpscr Min. darbinis plotis 70 mm (be nuolydžio 65 mm) Deimantiniai įrankiai T&G profiliui + padavimo juostinis konvejeris

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Njdpsg A D Ansfx Acpocr Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus,

Būklė: labai geros būklės (naudotas), COSTA LEVIGATRICI Series S model SN with 5 units First unit: electronically segmented crossbelt Second unit: roller 1 Third unit: roller 1 Fourth unit: electronically segmented super-finishing pad Fifth unit: electronically segmented crossbelt Ncedpfx Acer Iyvmjpor Working width: 1350 mm Vacuum system Inverters on all belt units Inverter on feed belt Exit brush unit Exit blower unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Naudotas BIESSE Rover A - Nesting CNC - Pagaminimo metai: 2016 - Prieinama nuo 2025 m. lapkričio - Papildomos nuotraukos ir vaizdo įrašas prieinami Ncodpfx Acexhcndjper