Free Tig pirkti naudotą (13 778)

Gamybos metai: 2014, būklė: beveik kaip naujas (naudotas), VANDENINIS (GILUMINIS ŠALDYMAS) HORIZONTALUS TUNELIS (Pridedama naudojimo instrukcija) Maisto produktų giluminis šaldymas skystu azotu Modelis: ZIP FREEZ SILVER LINE 2 tipas: 90X12 Bendrieji matmenys (m): Ilgis: 10,30 Plotis: 2,30 Aukštis: 1,81 Nwsdpfx Ahjyf Hliecjl Aukštis valymo padėtyje: 2,31 Giluminio šaldymo kamera Ilgis: 8,70 m Naudingas plotis: 1,20 m Aukštis: 0,25 m Plotas (m2): 10,44 Svoris: 3200 kg Gamintojas: SEPAR, Prancūzija Naudotas karštų įdarytų desertų vėsinimui Pilnas komplektas su valdymo įranga, konvejeriu ir vamzdynu

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, Sijojimo įrenginys, sudarytas iš: - Padavimo bunkerio - 2 x konvejerinių juostų Nwodpfx Ahezcy Tuecjl - 1 x sijojimo mašinos su vienu sietu

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1994, Likutinio betono perdirbimo įrenginys Pašaras su transportavimo sraigtu Siurbliai Maišytuvai Nodpfxoywn U Rs Ahcewl

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodama aukštos kokybės TIGRIP TKG VHS tipo kraninė šakė, skirta naudoti sunkiojoje pramonėje. Kraninė šakė turi automatinį svorio balansavimą, todėl pakabinimo taškas pats susilygina virš krovinio svorio centro. Idealiai tinka saugiam palečių ir krovinių transportavimui su salės kranu. Keliamoji galia, priklausomai nuo konfigūracijos ir svorio centro padėties, yra nuo 600 kg iki 3 000 kg. Gamintojas: TIGRIP Modelis: TKG 3,0t VHS Pagaminimo metai: 2020 Keliamoji galia: 600–3000 kg Svoris: 250 kg Būklė: naudota, labai gera. Nwodpey U H Rfofx Ahcsl Tik atsiėmimas vietoje. Garantijos ar atsakomybės nėra.

Būklė: naudotas, Lentyninė presas Tiger 1000x2200 19/26 Nodpfx Ahezkh H Rocswl

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Artiglio Gatter Baujahr: 2002 (generalüberholt 2023) Technische Daten: - Schwungrad: 1300 mm Njdpfev Ny Nxsx Ahcswl - Schwungradband: 168 mm - Maximale Sägebandlänge: 8.860 mm - Drehstrommotoren 400V, 50Hz - Hauptantriebsmotor: 55,8 kW - Motor für Sägebandspannung: 0,55 kW - Motor für Sägebandführungsvorschub: 1,5 kW - Motor für Schwungradneigung: 0,12 kW - Motor für hydraulisches Bremssystem: 1,5 kW - Zentrale Aufkronung Ausstattung: - 3 Stück Stammspannvorrichtungen - Feste Haken - Mobile Anschläge mit 3 festen Positionen - Hydraulischer Stammwender - Elektronischer Teiler mit 50 Arbeitsprogrammen - Quer-Spannstockbewegung mit 2-stufigem Motor, Geschwindigkeit 1,8–8 m/min - Hydrostatischer Vorschub mit Stahltauseilzug - Steuerpult - Automatische zentrale Schmierung - Pantograph für Kabel

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 10 000 kg, šakių ilgis: 1 400 mm, Forks Load center: 600 mm Fork width: 200 mm Fork thickness: 90 mm Nwsdpfx Aswhr Ntshcsl Condition: Operational and fully functional Technical condition: New Description: Bolt-on fork tines: 200 x 90 x 1400 mm / Height: 900 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 178 h, keliamoji galia: 454 kg, kėlimo aukštis: 7 960 mm, statybinis aukštis: 2 310 mm, kuro tipas: elektrinis, pavaros tipas: Elektro, statybos plotis: 1 180 mm, Žirklinė keliamosios platforma Techninė būklė: gera Priekinių padangų dydis: 15x5 Galinės padangos dydis: 15x5 Akumuliatoriaus būklė: 80 - 100% CE sertifikatas, Paveikslėlis gali būti simbolinis Svoris: 1 971 kg Keliamoji galia: 454 kg Keliamoji galia su ištrauktu platformos pailginimu: 113 kg Vidinis/išorinis apsisukimo spindulys: 0 / 2,29 m Didž. darbinis aukštis patalpose: 9,96 m Didž. darbinis aukštis lauke: 7,99 m Platformos aukštis (suskleista): 1,19 m Išorinė platformos plotis: 1,18 m Ratų bazė: 1,85 m Nedpfsvgh T Hsx Ahcewl

Būklė: naudotas, Gamybos metai: 1991, -1- Used deflection pulley/drive roller, drum length approx. 1250 mm, drum diameter approx. 800 mm, total shaft length approx. 2000 mm, shaft diameter approx. 123 mm, year of manufacture unknown. Both bearings rotate smoothly. Price EXW. Nwjdpfjwqfz Usx Ahcsl

Būklė: naudotas, Double Band Saw for Small Logs The machine is designed for cutting small logs of various sizes up to a maximum diameter of 400 mm (in this model, increased to 550 mm!). Minimum log length: 1000 mm. Model is still produced under the names ARTIGLIO SDE80 - SD100 - SD110 - SD115 - SD130. - Very robust steel frame - Mechanical blade tensioning device - Constant blade tension and guidance - Manual oscillation of upper flywheels Nodpfxexwk I De Ahcowl - Powerful oscillation of lower flywheels - Fully assembled control cabinet with analog components for operating infeed and outfeed conveyors! - Pneumatic clamping and pressing of processed logs! - Electronic cutting thickness measurement device (cant width) with 5 preset sizes - Movement of components via gear motor with frequency inverter! - Log self-centering on infeed system components! - Log pressing with heavy-duty spiked rollers - Standalone operator control station - Automatic loading and unloading systems! Technical Specifications: - Flywheel diameter: 800 mm - Flywheel width: 75 mm - Blade width: 75–80 mm - Blade thickness: 0.8 mm - Blade length: 5700 mm - Motor power: 2 x 15 kW - Min. cant thickness: 60 mm - Max. cant thickness: 400 mm - Max. cutting height: 550 mm

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 526969342, Gasparin Jaw Crusher GI129CV Everest Mobile jaw crusher on tracked chassis Njdpfx Ajhd I Siehcowl 55-ton machine with an extremely robust crusher and exceptionally high-performance potential. It is characterized by its heavy-duty design in all components and is surely the best solution for the toughest applications. Equipped with a Grizzly vibrating feeder (GI129C), it is suitable for more traditional applications, while with a vibrating feeder and pre-screen (GI129CV), the machine is ideal for demanding applications with high fines content and high material moisture. With a standard configuration including the patented HCS-System (Hydraulic Crushing System), EVEREST is the best answer to quarry requirements. Production capacity: approx. 430 t/h Patented HCS-System Proportional distributor with “Load Sensing” for system optimization and up to approx. 30% reduction in fuel consumption Hydraulically adjustable crusher gap, even during operation Quick locking system with wedges and folding cylinders Dust extraction Fuel pump Magnetic separator Warranty: 1 year or up to max. operating hours from plant commissioning Technical Data: Jaw crusher: 1150 x 850 mm Crusher gap: adjustable from 75 to 200 mm Feed hopper: 7 m³ – 2850 x 4960 mm Double-deck vibrating screen: 1170 x 2000 mm Main conveyor belt: 1100 x 10,000 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, Emission Stage V Control panel Track chassis: 500 x 3900 mm Weight: kg Transport length: 12,950 mm Transport width: 3,000 mm Transport height: 3,400 mm Additional Information: Application: Construction General condition: very good Technical condition: very good Visual condition: very good

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 341889991, Further options and accessories Control system, control room Remarks Frumecar ECA Mix 1000 fully mobile concrete batching plant * Capacity: 50 m³/h * Plant does not require any foundation and can be assembled in 1 day * Please inquire for a specific offer and technical details More machines and mixing plants available on our website Further information Nedpfxehd I Ulj Ahcjwl Intended use: Construction, Applicable material: Concrete, Overall condition: Very good, Technical condition: Very good, Visual condition: Very good,

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 332050066, Marini Carbon T-Box 160 mobile Asphaltmischanlage Baujahr: Neu Nodpfxehd I Upo Ahcewl Leistung: bis zu 160 t/h - Containerbauweise - Zuschlagstoffbunker: 4 Stück - Fassungsvermögen pro Bunker: 10 m³ - Trockentrommel: Gegenstromverfahren - Brenner: 13 MW - 1 Jahr Garantie - CE-zertifiziert Dieses Angebot ist freibleibend. Irrtümer und Eingabefehler vorbehalten. Es gelten ausschließlich die Vereinbarungen im Auftrag beziehungsweise im Kaufvertrag. Weitere Maschinen und Mischanlagen finden Sie auf unserer Webseite. Further Information Einsatzbereich: Bauwesen, Verarbeitbares Material: Asphalt, Allgemeiner Zustand: sehr gut, Technischer Zustand: sehr gut, Optischer Zustand: sehr gut,

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 145568556, Gasparin Jaw Crusher GI129C Everest Mobile jaw crusher on crawler tracks 55-ton machine with extremely robust crusher and exceptionally high potential. Distinguished by its rugged construction throughout, it is certainly the best solution for the toughest applications. Equipped with a Grizzly vibrating feeder (GI129C), it is suitable for more traditional applications; with a vibrating feeder and pre-screen (GI129CV), the machine is suitable for demanding applications with high fines content and significant material moisture. Featuring as standard the patented HCS System (Hydraulic Crushing System), EVEREST is the ideal solution for the requirements of quarry operations. Production capacity: approx. 400 tons/hour Patented HCS System Proportional distributor with load sensing for system optimization and fuel savings of approximately 30%. Jaw gap hydraulically adjustable even during crushing operation Nwsdpfohd Na Hox Ahcjl Quick locking system with wedges and folding cylinders Dust extraction Fuel pump Magnetic separator Warranty: 1 year or up to maximum operating hours from commissioning of the unit Technical data: Jaw crusher 1150 x 850 mm Crushing gap size adjustable from 75 to 200 mm Feed hopper 7 m³ – 2850 x 4960 mm Grizzly feeder 1120 x 4250 mm Main conveyor 1100 x 10,000 mm 4-cylinder diesel engine with constant speed 82 hp/60 kW, emission stage V Control panel Crawler track 500 x 3900 mm Weight: kg Transport length 12,950 mm Transport width: 3,000 mm Transport height: 3,400 mm Further information Application: Construction Overall condition: very good Technical condition: very good Visual condition: very good

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. Nwodpfxomhhyas Ahcsl We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Nsdpfxjmhhype Ahcjwl Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Nsdpfxomhh Ane Ahcowl - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Nwsdjmhh Dzjpfx Ahcol Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: naujas, Feet supports for conveyor belt or roller conveyor RA2004 Adjustable feet or made to measure Height adjustable by +/- 50-100 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Nsdpfx Ajk Abthohcjwl Contact us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Būklė: geras (naudotas), Vamzdžių griebtuvas, apvalus griebtuvas, klojimo žnyplės, apvalios medžiagos griebtuvas, žirklinis griebtuvas -Gamintojas: Tigrip, apvalios medžiagos griebtuvas tipas TRU 15/300 Nwsdpfx Aslf Tqqohcol -Griebimo plotis: 80–300 mm -Keliamoji galia: 1,5 t -Kiekis: 2 griebtuvai -Kaina: už vienetą -Matmenys: 700/220/H500 mm -Svoris: 25 kg/vnt.

Būklė: naujas, TIGERMETAL WH60 – 60-ton Hydraulic Workshop Press | Electric + Manual Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). Save 24% off the RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing tasks in workshops and industrial applications. With a pressing force of 60 tons, this machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast workflows in automatic mode and precise fine adjustment for sensitive applications. The heavy-duty steel construction and the laterally adjustable cylinder allow for versatile applications, ensuring high stability and safety. 🔧 Technical Specifications: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tons Drive: Electric motor + manual pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Clear width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely adjustable pressure for delicate tasks ✔ Side-shifting cylinder ✔ Stable, durable steel construction ✔ Integrated pressure gauge for monitoring ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. V-blocks, supports) Many other workshop presses available in various versions, sizes, and with optional equipment! Some images show a slightly different version from the one offered here. The version depicted also features an additional automatic function. Available models: 30t 60t 100t 150t 200t Nwsdpfsf Sqcrjx Ahcel >200t: on request Special machines: on request Brand new machine! We can also build custom presses to your specifications. The pressure cylinder is mounted on a sliding carriage, allowing the cylinder to be moved laterally. This enables you to fully utilize the maximum frame width. A demonstration machine is available for onsite power-up testing. ----- Please contact us—we will gladly provide advice without obligation. ----- The listed price is net plus 19% VAT. All information subject to change! Europe-wide delivery available! The European Commission provides a platform for online dispute resolution (ODR platform). This listing is intended solely as an online presentation of our goods. Contract negotiations take place via telecommunication (email, fax, telephone, messaging portal), during which we first provide a non-binding offer. At that stage, we will also inform you about our general terms and conditions, as well as the right of withdrawal and legal notice, before a purchase/contract is concluded.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) Nedpfxsguk Dke Ahcswl - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation Nwsdpoguk Dvefx Ahcsl - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, sheet clamp, plate clamp, beam clamp, beam claw, plate grab, material grabber, material clamp - Plate clamps Nwedpfx Ajdi Sluehcsl - Clamping range: 0 to 32 mm - Load capacity: 3,000 kg - Quantity: 1 clamp available - Price: per unit - Weight: 14 kg/unit

Būklė: geras (naudotas), Sheet clamp, plate clamp, beam clamp, girder clamp, sheet gripper, material gripper Nwodpfx Ahsb A Niwjcsl - Plate clamps - Clamping range: 3 to 24 mm - Load capacity: 3,000 kg - Quantity: 2 clamps available - Price: per piece - Weight: 14 kg each