Extruder pirkti naudotą (413)

Sąlyga: naudotas, Gamybos metai: 2003, Die Macchi 3-Layers ist eine leistungsstarke Blasfolien-Coextrusionsanlage zur Herstellung von Universalfolien mit hohen Breiten- und Durchsatzanforderungen. Sie verarbeitet LLDPE, LDPE, mLLDPE, MDPE, HDPE sowie optional (im Upgrade) auch PP. Das System verwendet einen 3-Schicht-Werkzeugkopf mit 700 mm Durchmesser und erreicht – abhängig von der Rezeptur – eine Ausstoßleistung von bis zu 900 kg/h. EXTRUSIONSGRUPPE: • Extruder: 80 mm + 100 mm + 80 mm • Infrarot-Heizung • Hydraulische Siebwechsler Detaillierte Upgradespezifikation: • Ein Extruder Plastex 100/30D (Mittelschicht B) • Zwei Extruder Plastex 80/30D (Schichten A und C) • Bimetallische Zylinder • Nitrierte Schnecken • Wassergekühlte genutete Zuführabschnitte • 5 Heizbereiche mit IR-Heizern und Gebläsen • Motoren: - 150 kW DC-Motor (100 mm Extruder) - 100 kW DC-Motoren (80 mm Extruder) • AC-Antriebstechnik mit digitaler Steuerung (IP55) für reduzierten Energieverbrauch und harmonische Verzerrung WERKZEUGKOPF (DIE HEAD): • Modell: TE505 • Düsendurchmesser: 700 mm, Düsenabstand: 1,8 mm • 4+4 Heizkreise mit keramischen Heizbändern (Gesamtleistung 19 + 35 kW) • Montiert auf einem Werkzeugwagen mit integriertem Luftverteilersystem • Einsatzbreite: 600–800 mm • Ausgestattet mit IBC-System Itsdpfx Asx Akywsbker KÜHLSYSTEM: • Dual-Lip Kohlefaser-Luftring Karat (K-Design) • ASR4 Double Flux Cooling Ring, Gebläse 15 kW • Jet-7 IBC-Kühlsteuerungssystem - 15 kW Zuluftgebläse - 18 kW Abluftgebläse - Blasendurchmesser-Sensor - Luftausgleichsventile - Frequenzumrichter ABZUGSEINHEIT: • Abzugsbreite: 3200 mm • Oszillierende Abzüge • Optional: Turmmontierter Zweitabzug mit Wägezellensteuerung WICKLEREINHEIT: • Doppelter, vollautomatischer Rückwärtswickler • Automatischer Rollenwechsel • Maximale Wickelbreite: 3150 mm FOLIENSPEZIFIKATIONEN: Folienbreite bei 700 mm Düse: 2000–3100 mm Stärke: 15–200 μm Beispielausstoß: 3000 mm Breite, 100 μm LDPE → 800 kg/h ±10% ANLAGENSPEZIFIKATIONEN: Installierte Leistung: 550 kW, 415 V, 3-Phasen + Neutralleiter Schneckendrehzahlen: 80/30D Extruder: 0–130 U/min 100/30D Extruder: 0–120 U/min Kühlwasserverbrauch: 6 l/min Druckluftbedarf: 6 bar ERWEITERTE STEUERUNGS- UND MESSSYSTEME: • Doteco gravimetrisches Dosiersystem Grado • Dickenprofilsysteme (EC Plus Module): - S2 Automatische Werkzeugkopfregelung - S3 Rotierender Kapazitativer Dicken-Scanner - S4 Track Scanner - Q1 Serielle Kommunikation (Extruder/Gravimetriewerte) - Q11 Druckermodul - Q12 Online-Modemdiganose - Q7 Energieverbrauchsüberwachung • K-Design VARIOcool automatische Dickenregelung • Kundig Reversierring und Dickenmessung ZUSATZAUSRÜSTUNG: • Turm • E+L Bahnlaufregelungssystem • Corona-Vorbehandlungsgerät AFS oder Station 2800 • Kalibrierkorb mit optionalem Hilfskorb • Blasengleiter GSRC 3200 (6 Ebenen, motorisiert, IBC-gekoppelt) • Mikroperforationssystem (FBF-Kalt-Nadel) • Luftwellen (8 Stück)

Gamybos metai: 2013, veikimo valandos: 10 000 h, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Recent 75 Extruder – Re-Pelletizing Line Austrian-made, engineered by professionals formerly with EREMA. The manufacturer was subsequently acquired by EREMA. Initial Commissioning: March 2013 Current Operating Hours: ~10,000 h Itjdpsx Ddatjfx Abksr Operating History: 2013–2018: In operation at a polyethylene film blowing plant, processing production scrap 2018–2020: Used intermittently at a recycling facility 2020–2023: Sporadic operation The line is offered as a complete pelletizing extruder, equipped with conveyor belts and a metal detector. Materials Processed: LDPE, LLDPE, HDPE, PP, POM (Per manufacturer's documentation, the system is also suitable for processing and pelletizing additional materials.) COMPONENTS - Integrated metal detector - Large feed conveyor belt - Agglomeration unit - Stainless steel drum, diameter: 1000 mm - Drive motor: AC 55 kW Main Technical Data – Extruder Screw diameter: 75 mm Screw drive: 65 kW (consisting of 4 independent motors that activate as required by load – efficient energy consumption) L/D ratio: 35:1 Variable screw speed Touchscreen operator panel Double degassing system Dual automatic screen changer Strand pelletizer with vibrating table Centrifugal dryer Process water cooling unit

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 01.642/F-1446, New Zig-Zag Cutter! For cutting an 800 mm pelt into a continuous strip for extruder feeding. 12-month warranty. Description attached! Ijdpfxjuz Twqs Abketr

Gamybos metai: 1999, Sąlyga: geras (naudotas), Gamintojas: Hans Weber GmbH Modelis: ZE 20 Itjdpex Ek Tljfx Abkjr Sraigtas: Vienos sraigto Pagaminimo metai: 1999 Sraigto skersmuo: 20 mm L/D santykis: 20 L/D Variklio galia: 3 kW Valdymo įtampa: 200 V Matmenys (IxPxA): 3100 x 1200 x 1280 mm Svoris: Apie 300 kg Kita: – Įskaitant pasukamą tvirtinimo svirtį – Įskaitant papildomą jungiamąją dėžę

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), SICA SOCKETING MACHINE .1.T. 100-500 For KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 1997 1 socket per cycle Socketing tools for: 250mm - 315mm - 400mm sewer pipe Itjdpfovfyntex Abkjr The socketing machine is in good condition and ready for operation.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, OMG sraigtinė presas keramikai su vakuumine pompa, sraigtų skersmenys 200/300 mm. OMG EKSTRUZORIUS SU 250/300 mm SKERSMENS SRIEGIU, KOMPLEKTUOJAMAS SU VAKUUMINE POMPA IR ELEKTRINE VALDYMO SPINTA, NAUDOTAS, VEIKIANTIS. Itsdsxvdg Depfx Abksr

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, veikimo valandos: 1 500 h, garantijos trukmė: 3 mėnesiai, 3DGence Industry F350 aukštos temperatūros 3D spausdintuvas, visiškai veikiantis Suderinamos medžiagos: PEEK, PEKK, Ultem, PC, PEEK-CF ir kt. 3D spausdintuvas su originalia komplektacija (3 ekstruderių moduliai) Itsdjx Avbtopfx Abker Likusi maždaug 3 mėnesių garantija Apžiūra galima bet kuriuo metu!

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), plėvelės plotis: 1 300 mm, Naudojama vienasluoksnė pūsto plėvelės ekstruzijos mašina parduodama puikios būklės, su 150 mm formos skersmeniu ir iki 100 kg/val. našumu. Tipas: Queens EP-65N Perdirbamos medžiagos: LLDPE/LDPE/MDPE/HDPE/įvairūs mišiniai. Sraigto skersmuo: 65 mm Galvutė: • Pūsto plėvelės formavimo galvutė • Formos skersmuo 150 mm Formavimo tarpas: 1,2 mm Našumas: iki 100 kg/val., priklausomai nuo medžiagos sudėties Itodpfexrb Hmjx Abkor • Maksimalus greitis 120 m/min • Vyniojimo plotis 1300 mm - Skraidančio peilio vyniojimo pjovimas Priedai: • Bokštelis • Gravimetrinė svorio kontrolės sistema • Masterbatch dozatorius • Kalibravimo krepšys Mašiną galima apžiūrėti veikimo metu. Parduodama su atsarginėmis dalimis.

Sąlyga: paruoštas naudoti (naudotas), Ekstruzijos įrenginys + elektros spinta Isdpfxjx Dd Hmj Abketr išėjimas: 200 kg Galvos neįtrauktos Vyniotuvo nėra

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Rondo Doge duonos ir konditerijos gaminių gamybos linija. Pagaminimo metai – 2006. Bendras ilgis – 16,7 m (mašina – 11,55 m + stalai – 5,15 m). Plotis – 1,80 m (darbinis plotis – 0,7 m). Aukštis iki piltuvo – 3 m, bendras aukštis – 4,05 m. Našumas: 600 kg per valandą – nuo 2500 iki 7500 vienetų kvadratinių, trikampių plokščių gaminių per valandą. Galimybė gaminti labai ploną nuolatinę tešlos juostą – nuo 1 mm iki 24,5 mm. - Tešlos porcijavimo bunkeris - 3 barstytuvai - 2-pav. tešlos ekstruderis - Kalibratorius - Palydovinė tešlos kočiojimo mašina Iedpfown Hhqjx Abketr - Miltų barstytuvas - Skersinis volas - Išilginė diskų agregatas - Tešlos lankstymo įrenginiai - Pneumatinė giljotina Mašina prijungta prie elektros ir paruošta darbui.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Iodpfx Aohy Tp Djbketr Application: PE, PP, or three-layer pipe production, or for pipe sheathing and application of stripes The line has been used for producing heating pipes Condition: Very good 2 units of WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 198 kW (269,20 AG), Plastik-Quetschtrockner / Agglomeratoren sind ein unverzichtbarer Bestandteil von Kunststoff-Folienwaschlinien. Nach dem Waschvorgang weisen gewaschene Folien in der Regel noch bis zu 40 % Restfeuchte auf. Ein hoher Feuchtigkeitsgehalt beeinträchtigt die Effizienz und Produktivität des nachfolgenden Extrusions- und Granulierprozesses. Der Einsatz eines Kunststoff-Quetschtrockners/Agglomerators ist daher unerlässlich, um das Material zu entwässern und die Schüttdichte des recycelten Folien- und Faserstoffs zu erhöhen. Dies steigert nicht nur die Kapazität der Extrusionslinie, sondern verbessert auch die Qualität der Endgranulate entscheidend. Selbst durch einen Spinn-Trockner aufbereitetes, wassergewaschenes Kunststoff-Folienmaterial enthält häufig noch über 10 % Feuchtigkeit, was eine konventionelle Agglomeration im Chargenbetrieb wirtschaftlich unrentabel macht. Durch die signifikante Reduzierung des Feuchtigkeitsgehalts steigt die Produktivität des Extruders sowie die Qualität der Granulate deutlich. Die neueste Entwicklung zum gleichzeitigen Trocknen und Agglomerieren von gewaschenen Folien sind Kunststoff-Quetschtrockner, welche den Restfeuchtegehalt auf ein Minimum senken können. Das Endmaterial enthält maximal 3 %, meist jedoch nur etwa 1 % Restfeuchte. Der Betrieb ist wesentlich kostengünstiger als Heißlufttrocknung, bei der das Material weiterhin in leichter Flockenform vorliegt. Zudem ist das Ergebnis besser, da das Material kontinuierlich direkt von der Waschlinie mit mehr als 40 % Feuchtigkeit dem Trockner zugeführt und als dichtes, rieselfähiges Agglomerat ausgetragen wird. In dieser Form ist kein Schnittverdichter-Extruder mehr erforderlich, was zusätzlich Energie spart, denn das Material ist so trocken und fest, dass es direkt dem Extruder zur Granulierung zugeführt werden kann. Mit über 30 Jahren Erfahrung in der Herstellung von Recyclingtrocknern und Extrudern hat GENIUS bereits mehr als 600 dieser Trockner an die Kunststoffrecyclingbranche verkauft. Itsdewg Sgcspfx Abksr Im Sortiment befinden sich vier Modelle mit einer Durchsatzleistung von 250 kg/h bis 1.200 kg/h.

Gamybos metai: 2015, Sąlyga: naudotas, Grinding wheel diameter max. 150 mm Speed 2850 rpm Total power requirement 0.45 kW Dimensions 465 x 316 x 302 mm Weight 10.7 kg NEW PRICE: ~ EUR 200.00 Description - Double-wheeled grinding machines from OPTIMUM - a quality product for trade and industry Isdpfxswp S U Ej Abkstr - Heavy-duty, durable industrial design with maintenance-free motor for continuous operation - Housing made of die-cast aluminium - Extended service life and smooth running due to balanced rotor with quality ball bearings - Spark guard on each grinding wheel to reduce spark emission - Sturdy, adjustable workpiece support - Safety screens made from shatter-proof material - Vibration-damping rubber feet - Two universal corundum grinding wheels

Sąlyga: labai geros būklės (naudotas), 3D Systems Type: DT60 Print Volume: 600 x 450 x 450 mm External Dimensions: 1265 x 780 x 1725 mm Precision in Z Axis: 1.25 microns Itsdsnnzyqopfx Abkor Precision in X and Y Axis: 7.5 microns Max. Extruder Temperature: 500 ºC Max. Build Chamber Temperature: 120 ºC Nozzle Diameter: 0.6 mm Other Available Nozzle Diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Titanium Thermal Barrier Two Independent Extruders Heated Filament Feed 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum Power Consumption: 3 kW/h 7” LCD Touchscreen Remote Monitoring Industry 4.0 Ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual Filament Loading Automatic Filament Change Heated Feeder Jam Detection Filament End Sensor Print Recovery System Liquid Cooling Double Hardened Glass Base Fixed by Vacuum High Printing Speed Positioning Controlled by Encoder Condition: used Scope of delivery: (See pictures) (Sale from site!) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Sąlyga: naujas, Gamybos metai: 2023, The ALTENDORF F 25 offers everything a panel saw needs, all in a compact footprint. Whether in your first workshop, for daily operations, in industrial production, or as a powerful secondary machine— the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be processed easily thanks to outstanding precision, user-friendly operation, and excellent cutting quality. The tilt-adjustable saw unit enables angle cuts. The smooth-running double roller carriage, designed according to the Altendorf system, as well as the digital display for height and tilt adjustment, are standard features. A machine equally suitable for beginners and professionals. Double roller carriage, 3,200 mm tilting, manual height and tilt adjustment, parallel fence with fine manual adjustment, angle-crosscut fence, Isdpoqvn Rujfx Abketr large extraction hood, PSV ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Parallel fence: 1,000 mm with Digit X table height: 880 mm Cutting height: 100 mm, max. saw blade diameter: 315 mm, max. saw blade projection: 104 mm, extendable crosscut fence up to: 3,450 mm, Speeds: 3,600 / 4,200 rpm, Motor power: 5.5 kW, 7.5 HP, Model: F 25 Version 5 5.5 kW (7.5 HP) with 2 speeds Parallel fence Digit X, 1000 mm Large PSV extraction hood Without scoring unit, prepared for retrofitting a scoring unit Special price ex stock 54634 Bitburg - immediately available -

Gamybos metai: 2019, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Farmet FL200 sraigtinis presas rapsams/saulėgrąžoms/sojai, su galutine geometrija, labai geros būklės. Variklis 22 kW, našumas 400 kg/val. (su priešpresu 500 kg/val.), lamelės ir geometrija patikrintos, geros būklės. Suporuotas su Farmet FE500 ekstruderiu (iš mūsų pasiūlos), gali perdirbti soją 400 kg/val. našumu. Ijdpfxoxa Hy Ue Abkotr

Sąlyga: labai geros būklės (naudotas), Ekstruderis 3D spausdinimo siūlų gamybai – 25/25 L/D Siūlome aukštos kokybės ekstruderį, skirtą 3D spausdinimo siūlų (filamento) gamybai. Įrenginys sukurtas nenutrūkstamam pramoniniam darbui ir išsiskiria tvirta konstrukcija, tiksliu temperatūros valdymu ir puikia medžiagos homogenizacija. Idealiai tinka gamintojams, medžiagų kūrėjams ir mokslinių tyrimų institutams. Techninė įranga ir ypatybės • 25/25 L/D ekstruderis – efektyviai suprojektuota sraigto geometrija užtikrina vienodą lydinio kokybę • Galinga lydimo zona – tikslus temperatūros reguliavimas pastoviai siūlo kokybei • Antgalis 3D filamento ekstruzijai – tinkamas visiems standartiniams siūlo diametrams Itedpfx Asxwvqqsbksr • Aušinimo vonia – stabilus filamento tempimas ir optimizuota aušinimo zona • Ištraukimo įrenginys – tiksliai reguliuojamas tempimo greitis, užtikrinantis skersmens stabilumą • Vyniojimo ir klojimo įrenginys – automatinis siūlo suvyniojimas • Puikiai tinka PLA, PETG, ABS, TPU ir daugeliui techninių medžiagų

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 525389e4-9874-4408-810c-82126df2811f, Gamybos metai: 2020, veikimo valandos: 7 508 h, bendras svoris: 75 kg, vidinis aukštis: 180 mm, vidinis ilgis: 300 mm, vidinis plotis: 220 mm, Įranga: CE žymėjimas, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D Printer Iodpfx Abjx I Rfgeketr Markforged Wash 1 Debinding Unit Markforged Sinter 2 Industrial Sintering Furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Print system: Dual-nozzle – Metal material and release material Print materials: Stainless steel 17-4 PH, 316L, Tool steel H13, A2, D2, Inconel 625, Copper, Titanium 6Al-4V Media supply: Filament feed, bound powder material Component characteristics Maximum component size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certificates: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure regulators and quick couplings Original Markforged transport case with spare build plates Caster wheels Isolation transformer

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Markforged Model: X7 Gen 2 3D Printer The X7 prints industrial-grade manufacturing jigs, fixtures, tools, and end-use parts. It is designed for use in production and prints parts that are stronger than machined aluminum at a fraction of the cost. It combines best-in-class surface finish, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, which is exclusively available on the X7. Technical Specifications: Printer Features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Itsdsvvlduspfx Abker Print bed: Kinematic coupling – flat to within 80 μm accuracy Laser: In-process inspection, active print calibration, bed leveling Extrusion system: 2nd generation extruder, Out-of-Plastic and Out-of-Fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz, Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, fiberglass, aramid fiber (Kevlar®), HSHT fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum)* Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum)* Part Properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill, multiple geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: two-factor authentication, org admin access, single sign-on Blacksmith: Adaptive manufacturing platform (requires additional purchase) Year of manufacture: 2020 Last service in December 2024 For sale ex location Condition: used Scope of delivery: (See pictures) One spool each of Kevlar, fiberglass, and carbon fiber, 11 partially used Onyx filament spools (Subject to changes and errors in the technical specifications, information provided without obligation!) We are happy to answer any further questions by phone.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 525389e4-9874-4408-810c-82126df2811f, Gamybos metai: 2020, veikimo valandos: 7 508 h, bendras svoris: 75 kg, vidinis aukštis: 180 mm, vidinis ilgis: 300 mm, vidinis plotis: 220 mm, Įranga: CE žymėjimas, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D Printer Markforged Wash 1 Debinding Unit Markforged Sinter 2 Industrial Sintering Furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Isdpjx I Rfasfx Abkotr Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Print system: Dual-nozzle – Metal material and release material Print materials: Stainless steel 17-4 PH, 316L, Tool steel H13, A2, D2, Inconel 625, Copper, Titanium 6Al-4V Media supply: Filament feed, bound powder material Component characteristics Maximum component size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certificates: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure regulators and quick couplings Original Markforged transport case with spare build plates Caster wheels Isolation transformer

Sąlyga: geras (naudotas), 3DGENCE Model: Industry F420 Year of manufacture: 2021 Technical Specifications: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changeover system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (See pictures) Weight: 350 kg (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone. Written orders can be placed via email or fax. Itsdpfjt I Dm Iex Abksr

Sąlyga: naudotas, dr. wiesner Type: INTEGRA DDV -1...1 bar Product Description: dr. wiesner Integra Leak Test System Itedpfewqm Ddex Abksr The classic – suitable for all standard testing methods Leak testing system for industrial leak and flow testing applications with full graphic color display Up to three independent test circuits operable 255 test programs storable Automatic process optimization with autoTune (optional) Communication via flexible, interchangeable bus interface modules Freely programmable fixture control Freely programmable special test sequences The device is suitable for testing using the relative and differential pressure method with overpressure. Special versions: None Technical Data: Power supply: 110 ... 230V~; 50 ... 60Hz (Connection via mains cable to XO plug) Pneumatic: clean and dry compressed air max. 7 bar (at connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Interfaces Electrical: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Test specimen connection (Test) Reference circuit connection (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (W x H x D) Weight: approx. 15.5kg Condition: used (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm³/10 min according to international standards. Temperature range: +30 - +400°C (extendable to 500°C). Device features: - Microprocessor for automatic testing, storage of test parameters (25 methods), storage and saving of results for 40 tests; Automatic calculation and display of temperature value and rheological basic data RS232 and USB interface Diagnostics Automatic rotary cutter for cutting extrudate Nozzle locking mechanism Weights: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions can be operated via computer interface. The Visual MELT software is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Procedures A and B. Base model + encoder + lift for raising and lowering the weight + automatic extrudate cutting knife, Code 7026.000 Max. force: 1200 N Stroke mm: 220 Volt: AC 230 50 Hz Ijdpfovx Sxdex Abketr Serv: Temp. (S2 60 sec) Current: 1.8 A Max. velocity: 10 mm/sec Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them for you by phone.

Sąlyga: labai geros būklės (naudotas), Desktop Metal 3D Printer Complete System We offer you a Desktop Metal 3D printer complete system. 3D Metal Printer Studio System from Desktop Metal Complete System: 3D Printer + Debinding Machine + Sintering Furnace Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating Condition: Used (Good) Year of Manufacture: 2019 Itedpek Hz Nqjfx Abkjr Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Specifications: - Printable Materials: Metal - Technology: FDM - Application: Industrial - Other Features: Suitable for office use - X-Axis Travel: 30 cm (12 in) - Y-Axis Travel: 20 cm (8 in) - Z-Axis Travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing and enables new features such as the use of closed-cell infills for lightweight yet strong parts. 1.2 Desktop Metal Studio Debinder (Delamination Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The Debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it requires no external ventilation and is safe for office environments. Automatic liquid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build Volume: 305 x 205 x 205 mm - Carbon casing - Gas supply: 2 x 900 L gas bottles - Heating power: 20 kW Specifications: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other Features: High-temperature, automatic operation - Maximum temperature: 1,400°C (2,552°F) Description: Fully automated and designed to fit through an office door, the furnace provides industrial-grade sintering in an office-friendly package. Built-in, material-specific temperature profiles ensure uniform heating and cooling without the residual stresses often found in laser-based systems. Condition: Used Scope of delivery: (See images) (Subject to technical changes and errors; all information is non-binding!) For further questions, we are happy to assist you by phone.

Sąlyga: naudotas, 3DGENCE Model: Industry F420 Technical Specifications: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changeover system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Itedpewnpbgsfx Abker Condition: used Scope of delivery: (See images) Weight: 350 kg (Subject to changes and errors in the technical data, information is non-binding!) For further questions, we are happy to assist you by phone. Written orders possible via email or fax.