Extruder pirkti naudotą (413)

Gamybos metai: 2024, Sąlyga: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Iedpfx Abohx Elfokjtr Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 1 used, partially overhauled, and function-tested Alphatec extruder, type AE-S 75.28 Itsdpfxeiyx Uze Abksr Screw diameter: 75 mm – 28 L/D Drive: 75 kW AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Further extruders available.

Gamybos metai: 2005, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 40 mm, mašinos/transporto priemonės numeris: DE27692, TECHNICAL DETAILS Screw diameter: 2 x Ø 40 mm L/D ratio: 44D Drive power: 100 kW Processable materials: PE, PP, PS, ABS FEATURES - Co-rotating screws - Degassing - Segmented screws and barrel Isdpswh R A Sjfx Abkjtr - Connection for side feeder

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Please refer to the pictures for further details! Manufacturer unknown. Previous application: wood pellets Additionally equipped with a lateral auger. Itsdpfxju T Rbzs Abker Auger diameter: 95 mm Sale upon offer!

Gamybos metai: 1999, Sąlyga: naudotas, Used Entex extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. We can also offer you an Entex PL WE 70! Itodpsbqt Arsfx Abkjr

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 019, IDE viengubos sraigto PVC ekstruzijos įrenginys Isdpfxjxgh H Aj Abkotr

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 Iedpfeiyya Ajx Abkjtr 1 used, partially overhauled and function-tested extruder Alphatec Type AE-S 75.28 Screw diameter 75 mm – 28 L/D Drive 75 kW – AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Twin-screw extruder Ref. No.: DE27678 Itsdjt Eqvdepfx Abkor Manufacturer: Leistritz Model: ZSE 27 MAXX Year of manufacture: 2007 Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive: 33.6 kW Details: Co-rotating, segmented screws and barrel, 1 x atmospheric degassing, 1 x vacuum degassing incl. vacuum pump Options: Pelletizing, dosing, side feeder This offer does not meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry – we have the right solution for almost every budget in our range.

Gamybos metai: 2017, Sąlyga: geras (naudotas), Used Xtrutech XTS 24 extruder for sale. The extruder is fully operational and was previously used in the field of powder coatings, sold with many spare parts. Itodevcynuopfx Abker

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 035, Vienos sraigtinės PVC ekstruzijos mašina Itodpfx Aboxgh Dzsksr

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Ijdoi Dtb Uspfx Abkstr Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Name: Used twin-screw extruder Plama number: DE27676 Manufacturer: Leistritz Model: ZSE 130 GL Year of manufacture: 2006 Itodeqqh Unjpfx Abksr Screw diameter: 2 x 130 mm L/D ratio: 35 D Drive motor: 500 kW Materials: PE, PP, PS, ABS + fillers Throughput: 1,000 - 2,000 kg (depending on material) Control: Currently without control cabinet, but can be offered separately Details: Co-rotating screws, degassing, segmented screws and barrel Options: Screen changer, dosing, pelletizing, control cabinet This offer does not meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry – we have suitable solutions for almost every budget in our portfolio.

Sąlyga: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 Mvc twin-screw extruder available. The extruder was previously used for powder coatings. Itodpfxovcyk Nj Abksr

Gamybos metai: 2003, Sąlyga: visiškai atnaujintas (naudotas), Stock no. 2086 BERSTORFF Type TE60 A-UT Twin-Screw Compounding Extruder Segmented screws and cylindes, water-cooled Screw diameter: 2 x 64 mm – 32 L/D Throughput capacity: approx. 800 kg/h, depending on material Screw speed: adjustable up to 625 rpm FLENDER gearbox Drive power: 197 - 350 kW – optional L/D 34 – up to > 40 L/D – available optionally at extra cost, subject to agreement, technical clarification, and material/formulation requirements We are happy to adapt the extruder to your specific needs. OPTIONAL: Screw configuration Screen changer Granulation Dosing Iedpfxsh Eyduo Abkstr Further twin-screw compounding extruders and complete lines available ex works Wuppertal. Please ask for our current machinery stocklist or visit us.

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), Category: Twin-screw extruder Reference Number: DE27691 Manufacturer: Feddem Model: DEC 72 MTS Year of Manufacture: 2012 Throughput Capacity: 400 – 700 kg/h Screw Diameter: 2 x Ø 72.0 mm Ijdjvk Sgfjpfx Abkstr L/D ratio: 32D, including housing extension to 42D Drive Motor: 168 kW Materials processed: PE, PP, PS, ABS Additional Features: Co-rotating screws, degassing – 2 x side feeder units, 6 gravimetric dosing systems by Schenk, underwater pelletizer ECON EUP 600, Trendelkamp classifier screen, degassing, vacuum pump, control system: BSG Very well-maintained complete line with only approx. 3,500 operating hours. Does this offer not meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry. We have suitable solutions for almost every budget.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter 75 mm – 25 L/D, cylinder with blower cooling Screw speed up to 130 rpm Drive: 120 kW – DC (overhauled), belt-driven Heating zones – control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by appointment at our Wuppertal facility. Matching accessories available: > Screen changer > Granulation (strand, hot-cut, or water ring) Itjdpfx Ajiyyndsbksr > Miscellaneous Additional extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your inquiry or visit.

Gamybos metai: 2009, veikimo valandos: 22 105 h, Sąlyga: labai geros būklės (naudotas),

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, cylinder air-cooled Screw speed up to 130 rpm Drive: 120 kW – DC (overhauled), belt drive Heating zone control section for downstream equipment Control cabinet, melt pressure sensor Inspection/test run can be arranged at short notice at our Wuppertal facility. Matching equipment available: Itjdpfjiyynwex Abker > Screen changer > Pelletizing (strand, hot die-face, or water ring) > Miscellaneous Further extruders and complete lines ready for demonstration at our Wuppertal facility. We look forward to your inquiry or visit.

Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), Category: Twin-screw extruder Reference number: DE27669 Manufacturer: Coperion - Werner & Pfleiderer Model: ZSK 40 Year: 2000 Throughput: 250 – 450 kg/h Screw diameter: 2 x Ø 40.0 mm L/D ratio: 40:1 Drive: 110 kW Materials processed: PE, PP, PS, ABS // Further details: Co-rotating, degassing with segmented screws and barrel Itsdpfjn Nxl Sjx Abkor Including brand new control cabinet Does this offer not match your requirements? Please visit our website "Plama Engineering" or send us your detailed inquiry – we have suitable solutions for almost every budget.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 500 kg/h depending on material, comprising: - Kreyenborg stuffing unit SW 100, drive 7.5 kW - BKG single screw extruder Ø 100 mm – 35 L/D, drive 132 kW – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating power approx. 35 kW - 1x atmospheric degassing zone (vacuum pump optional at extra cost) - Screen changer double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² - BKG underwater pelletizer AH 300, complete with: - Start-up valve incl. hydraulic station - Pelletizer with 4 kW drive - Water pump 2.2 kW - By-pass system, water tank with 9 kW installed heater plus heat exchanger - BKG centrifugal dryer TWE 300 with 3 kW drive - Pellet classifier screen Itsdpfx Aod Sg I Ijbkjr - Control cabinet with Siemens touch panel (updated) OPTIONAL at extra cost: ᐳ Vacuum pump ᐳ Material conveying system, big-bag station ᐳ Process water chiller / temperature control Further pelletizing lines available ex Works Wuppertal, ask for our current machine stock list or visit us.

Gamybos metai: 2003, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 27 mm, TECHNICAL DETAILS Output: 10 – 40 kg/h Screw and Barrel Technology Design: Co-rotating Center Distance of Screws: 23 mm Screw Diameter: 2 × Ø27.0 mm Kneading Disc and Kneading Block Diameter: 27.0 mm Screw Material: 1.2379 Barrel Diameter: 27.2 H8 Barrel Material: 1.8550 nitrided, Nitriding layer 0.5–0.6 mm Screw Length: 40 D Screw Torque: 2 × 100 Nm Screw Speed: max. 500 rpm Drive Drive Type: DC shunt motor Drive Power: 10.5 kW Motor Speed: max. 2,690 rpm Gear Ratio: i = 5.38 Iedpfxev U Da Se Abkotr Power Transmission: Clutch Heating and Cooling System Number of Heating Zones: 11 Heating Capacity: 9.85 kW Number of Cooling Zones: 9 Type of Cooling: ZIC (Cylinder Intensive Cooling) Feed Zone Cooling: Water Cooling Water Consumption Feed Zone: 30 l/h Process Parameters Melt Pressure: max. 300 bar Melt Temperature: max. 350°C Discharge Height: 1,050 mm Dimensions and Weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrel - Co-rotating technology - Degassing

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Iodpsh Eyd Rofx Abkjtr Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 27 mm, mašinos/transporto priemonės numeris: DE27688, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Screw diameter: 2 x Ø 27.0 mm L/D ratio: 40D Drive power: 33.6 kW Processable materials: PE, PP, PS, ABS EQUIPMENT - Co-rotating screws Itjdpfxsv Dkraj Abker - Segmented screws and barrel - Atmospheric degassing - Vacuum degassing incl. vacuum pump

Gamybos metai: 2003, Sąlyga: visiškai atnaujintas (naudotas), Stock No. 2086 Screw Diameter: 2 x 64 mm - 32 L/D Itedpfec Rukwjx Abksr Throughput Capacity: 800 kg/h Drive Power: 197 - 350 kW - Optional L/D Ratio: 34 - up to 40 L/D - Available at extra cost, subject to agreement and clarification of technical details as well as material requirements / formulation OPTIONAL: Screen changer, pelletizing unit, dosing systems Screw configuration We are happy to adapt the extruder and accessories to your requirements. Please feel free to contact us with any questions.

Gamybos metai: 1980, Sąlyga: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 2489, Stock No. 2489 1 used, function-tested single-screw extruder, ready for demonstration Manufacturer: KUHNE Germany Isdpfx Abjd Sg Hcjketr Type: ES 60-24 Screw diameter: 60 mm – 24 L/D Feed zone cooled Screw speed up to 100 rpm Drive: 25.5 kW – 63 A – DC 4 cylinder heating zones with blower cooling 3 head heating zones Control cabinet and operator panel The machine is ready for demonstration; a test run with your material can be arranged at short notice at our Wuppertal facility upon agreement. Accessories such as screen changers, pelletising equipment, etc. are available at extra cost; details on request. Further extruders available from stock—visit us or request our current machine stock list.