Elektriniai Metalo Žirklės pirkti naudotą (38 841)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Siedlce
352 km
Elektrinis stiebo vežimėlis
CORMAKQ15E25
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Electric mast stacker with 1,500 kg capacity and 3,500 mm lifting height is an ideal warehouse solution for handling heavy loads. The robust steel construction ensures stability during lifting operations. Polyurethane rollers facilitate movement on uneven surfaces. This stacker enables fast and safe load transfer across multiple levels and in various conditions.
Introduction to Electric Mast Pallet Stackers
The CORMAK Q15E35 electric mast stacker is a versatile and highly efficient solution for material handling and lifting up to a height of 3.5 meters. Thanks to its innovative design and advanced technology, this stacker is perfect for use in warehouses, production halls, and distribution centers.
Key Benefits of the 1,500 kg Electric Pallet Stacker
This model’s technical parameters include a lifting capability of an impressive 3,500 mm, allowing for effective handling of goods at various heights. With a lifting capacity of 1,500 kg, it is ideal for managing medium to heavy loads.
Machine Features
- Sturdy high-grade steel frame ensures greater rigidity and stability during lifting.
- Special handle system transmits steering input directly to the wheel for precise maneuvering.
- Integrated battery charger.
- Lifting forks to maximum height without load takes just 25 seconds!
- Maintenance-free brushless motor technology.
Itodex Dk A Uepfx Af Ijb
- Battery charge indicator integrated in the control box.
- Emergency stop switch.
- Integrated controller protects the battery from over-discharge or damage.
- Sealed, maintenance-free AGM battery.
- No periodic maintenance required during the warranty period.
Technical Specifications
MAX LIFTING HEIGHT: 3,500 mm
CAPACITY: 1,500 kg
LOAD CENTER: 600 mm
FORK LENGTH: 1,150 mm
OUTSIDE FORK WIDTH: 570 mm
HEIGHT WITH LOWERED FORKS: 2,330 mm
HEIGHT WITH EXTENDED MAST: 4,000 mm
MINIMUM FORK HEIGHT: 85 mm
OVERALL WIDTH: 810 mm
OVERALL LENGTH: 1,745 mm
GROUND CLEARANCE: 30 mm
TURNING RADIUS: 1,390 mm
TRAVEL SPEED (LOADED/UNLOADED): 3.5/4 km/h
LIFTING SPEED (LOADED/UNLOADED): 140/200 mm/s
LOWERING SPEED (LOADED/UNLOADED): 120/100 mm/s
GRADABILITY (LOADED/UNLOADED): 5/7%
SERVICE BRAKE TYPE: Electromagnetic
DRIVE MOTOR POWER: 0.75 kW
LIFT MOTOR POWER: 2 kW
BATTERY VOLTAGE / CAPACITY: 12V 75 and 120 Ah
WHEEL MATERIAL: Polyurethane
WEIGHT: 586 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTokarka uniwersalna 460x1500
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Industrial metal lathe CORMAK 460 x 1500 – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 5.5 kW/400V induction motor – maximum torque, large spindle bore of 80 mm. Recommended for turning hard steels and mechanical turning. Suitable for various tasks, such as internal and external surface turning, taper turning, polishing, metric and inch threading, drilling, and broaching.
Machine Description:
- Universal lathe 460 x 1500 CORMAK can be used for many operations such as internal and external turning, taper turning, polishing, metric, inch, module, and DP threading, drilling, and broaching.
- The solid cast iron bed construction provides maximum vibration reduction. Additionally, the bed is hardened and precisely ground. An adequate bed width of 300 mm ensures stable and precise working conditions.
- Digital readout operates on (3) three axes: longitudinal, cross, and top slide movement. Processed electronic signals from optical scales display axis movement values on the digital screen.
- The lathe is fitted with a high-quality, reinforced spindle bearing system.
- Optimal performance is ensured by a large 80 mm spindle bore, a 250 mm 3-jaw chuck, and a powerful 5.5 kW motor.
Itsdpfx Aforiczio Ieb
- Rapid longitudinal and cross feed system significantly shortens machining times and increases productivity.
- Hardened and ground gears in the spindle gearbox – guarantee long-term operational stability.
- Equipped with a lead screw and feed shaft for thread cutting and automatic longitudinal and cross feeds.
- Easy spindle speed and automatic feed adjustment from the ergonomic control panel on the gearbox.
- Capable of machining a wide range of threads without changing the change gears in the quick-change gearbox. Wide threading range: metric (41) 0.1–14 mm, inch (60) 2–112 T.P.I, module (34) 0.1–7 M.P., DP thread (50) 4–112 D.P. Right- and left-hand threading.
- Thread chasing dial for precise counting of thread leads. The function is designed to save time, allowing the lead screw nut to be disengaged in a few passes and quickly return the carriage to the starting position manually.
- The bed is fitted with a removable gap for machining large-diameter components, e.g. flanges. This lathe model allows machining workpieces up to 690 mm in diameter with the gap bridge removed.
Mažas skelbimas
Siedlce
352 km
Elektrinis padėklų keltuvas
CORMAKQ15-3
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The electric pallet truck is a compact and efficient material handling unit with a load capacity of 1,500 kg, making it ideal for use in warehouses and distribution centers. It features a turtle mode and a removable battery. Robust construction and advanced design solutions make this truck a reliable tool for efficient logistics operations.
The battery is mounted under a protective cover, shielding it from damage and contamination. The truck's design allows for easy battery removal, significantly simplifying replacement or off-board charging. This feature enables quick preparation of the truck for continued operation, eliminating lengthy operational downtimes.
The electric pallet truck is equipped with polyurethane wheels, which offer high abrasion resistance and excellent floor adhesion. Additionally, the use of polyurethane rollers increases stability and ride smoothness, reduces noise, and ensures improved traction, particularly on smooth warehouse surfaces. The maximum gradeability is 8% when loaded and 16% when unloaded, allowing versatile operation across various conditions.
Weighing 115 kg, the electric pallet truck remains stable yet light enough for easy maneuverability. Durable construction and high-quality materials ensure the unit is robust and resistant to mechanical damage.
Standard equipment includes turtle mode, enabling precise maneuvering in confined spaces. This feature is especially useful in narrow warehouse aisles, on loading ramps, and in areas with limited freedom of movement. Turtle mode reduces travel speed, increasing control and minimizing the risk of collisions. Notably, the truck can be operated with the tiller in a vertical position while in turtle mode, further facilitating handling in tight areas where traditional tiller positioning might restrict the operator’s movement. This function delivers greater precision and added safety in demanding operational conditions.
Itedjwaypxjpfx Af Ijb
This modern transport unit is perfectly suited for high-throughput warehouses, industrial plants, and wholesale outlets where speed and safety of pallet handling are critical. Incorporating advanced technology, the truck combines high performance, compact dimensions, and dependability, making it an excellent choice for companies seeking efficient logistics solutions.
Technical Specifications
- Load capacity: 1,500 kg
- Turning radius: 1,400 mm
- Raised fork height: 190 mm
- Lowered fork height: 80 mm
- Fork length: 1,150 mm
- Fork width: 560 mm
- Wheel diameter: 80/190 mm
- Battery voltage/nominal capacity: 48/10 V/Ah Li-ion (equivalent to 24V/20Ah)
- Operating time per charge: up to 3 hours
- Charging time: 2.5 hours
- Drive motor power: 0.75 kW
- Lift motor power: 0.8 kW
- Brake: electromagnetic
- Drive speed with/without load: 4.5 / 5 km/h
- Maximum gradeability with/without load: 8/16 %
- Wheel type: polyurethane
- Weight: 115 kg
- Dimensions: 1,566 x 685 x 1,200 mm

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Siedlce
352 km
Rankinės giljotininės žirklės
CORMAKHS-12
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Guillotine Shears CORMAK HSS 12
Manual shears for cutting sheet metal, flat bars, and steel rods. The different models vary in blade length. Versatile shears for sheet metal cutting, ideal for use in locksmith workshops and on construction sites.
- Favorable geometry enables cutting without excessive force
- Safe material clamping thanks to adjustable clamp
Technical data:
Blade length: 304 mm
Itsdsvzqmfepfx Af Ijb
Max. sheet metal thickness: 6 mm
Max. flat bar to be cut: 70 x 6 mm
Max. rod to be cut: 13 mm
Dimensions (L x W x H): 740 x 160 x 440 mm
Weight: 26 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTytan 750 PRO VARIO 230V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Metal Lathe TYTAN 750 VARIO, 230V with variable spindle speed. Machining parameters: 250 x 750 mm, DC motor: 1.1kW/230V. The lathe is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. It is typically used in small industrial workshops, repair shops, garages, etc.
Main advantages:
- Modern DC motor with stepless spindle speed regulation ensures user convenience and reduces calibration time.
- LCD display showing spindle speed allows for monitoring and quick adjustment of spindle RPM during cutting and threading operations.
- Two spindle speed ranges: low (50-1125) for machining hard steels and high (100-2250) for high-speed precision turning.
- Thread cutting: metric – 18 pitches (0.2–3.5), imperial – 21 pitches (8–56); capable of both left- and right-hand thread cutting.
- Automatic longitudinal feed offers 6 feed rates (0.07 to 0.40 mm/rev), significantly shortening machining time without compromising work quality when turning long parts.
- The machine fully complies with EU directives (CE) as well as Polish regulations and DIN standards.
Technical Specifications:
3-jaw chuck: 125 mm
Maximum turning diameter over bed: 250 mm
Turning diameter over cross slide: 150 mm
Turning length between centers: 750 mm
Maximum length of workpiece (chuck/tailstock): 700 mm
Bed width: 135 mm
Tool post dimensions: 65 x 65 x 20 mm
Maximum tool size: 12 x 12 mm
Spindle bore: 30 mm
Spindle taper: MT4
Spindle speed control: stepless (L/H)
Spindle speeds: L: 50–1125 / H: 100–2250 rpm
Metric threads: (18) 0.2–3.5 mm/rev
Imperial threads: (21) 8–56 TPI
Longitudinal feed rates: (6) 0.07–0.4 mm/rev
Top slide travel: 70 mm
Longitudinal travel: 650 mm
Itodow H Raujpfx Af Iob
Cross slide travel: 135 mm
Tailstock sleeve diameter: 30 mm
Tailstock quill travel: 60 mm
Tailstock taper: MT2
Motor power S1/S6: 1.1/1.32 kW / 230V
Dimensions L/W/H (without base): 1310 x 610 x 490 mm
Dimensions L/W/H (with base): 1350 x 560 x 1250 mm
Weight (without base): 165 kg
Weight (with base): 180 kg
Standard Equipment:
- 3-jaw chuck (125 mm)
- Fixed and traveling steady rest
- Change gears
- MT2 fixed center
- MT4 fixed center
- Left and right jaws (1 set)
- Grease gun
- Chip tray
- Chuck key and tool post wrench
- Service tool kit
- Safety guards compliant with CE standards
Mažas skelbimas
Siedlce
352 km
Pusiau automatinis metalo pjaustytuvas
CORMAKH-50/70 przemysłowa dwukolumnowa
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Semi-automatic hydraulic column band saw. A universal machine designed for series production, suitable for cutting both solid materials and profiles. The device comes standard with an automatic blade tension control module set for the desired depth, ensuring precise and straight cuts. Exceptionally large cutting capacities: 500x700 mm.
Machine description
The CORMAK H-50/70 double-column band saw is a high-performance machine for semi-automatic cutting cycles of solid materials and profiles made from steel, cast iron, and non-ferrous metals. The double-column design provides increased rigidity during the cutting process, while the entirely different arm and blade guidance technology, compared to scissor-type machines, significantly reduces cutting time and increases accuracy.
Itsdoizi T Espfx Af Iob
In the CORMAK H-50/70 semi-automatic band saw, once the start switch is activated, the entire cutting cycle—including hydraulic vise clamping of the material, blade movement initiation, lowering of the cutting arm (speed smoothly adjustable), machine stop at the end of the cut, arm lift (lifting height adjustable), and hydraulic vise release—takes place automatically. Manual operation is simplified to material feed against a stop. The robust arm, made from a single cast-iron piece, together with the refined, heavy, and stable frame construction, gives the CORMAK H-50/70 saw exceptional rigidity. This translates into trouble-free operation and highly precise cuts.
Blade tension control ensures optimal operating conditions for the blade. In the event of blade breakage, the machine stops automatically. Blade precision is ensured by guides composed of bearings and carbide inserts. The innovative design and manufacture of the CORMAK semi-automatic and automatic saw series according to ISO:90001 and ISO:140001 standards and certifications guarantee safety, quality, and reliability. The use of motors licensed by ABB, a globally recognized and respected manufacturer and industry leader, guarantees long-term, trouble-free performance.
Technical specifications
TYPE: Semi-automatic
ARM LIFTING AND LOWERING: Hydraulic with smooth lowering adjustment
BLADE SPEED: 40/60/80 m/min
VISE: Hydraulic
TABLE HEIGHT: 600 mm
SAW BLADE: 41x1.3x6100 mm
MAIN MOTOR POWER: 5 kW
TOTAL POWER: 6.5 kW
DIMENSIONS (LxWxH): 3050x1150x1950 mm
WEIGHT: 2400 kg
Maximum cutting range [mm]
Angle 0º ø500 500 × 700
Standard equipment
- Front-mounted control panel
- Semi-automatic cycle operation
- Built-in hydraulic unit
- Arm position memory function
- Blade cleaning brush
- Cooling system
- Bimetallic blade
- CE declaration of conformity
- Technical and Operating Documentation
Mažas skelbimas
Siedlce
352 km
Pusiau automatinis metalo pjaustytuvas
CORMAKS-440R przecinarka taśmowa do metalu
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Semi-automatic Band Saw CORMAK S-440R. The saw arm is made from a single cast iron piece, and in combination with a 34 mm cutting blade, it is fully capable of cutting both profiles and solid materials. The band saw is equipped with a vice as well as hydraulic lowering and raising of the arm.
Machine Features
In semi-automatic band saws, once the switch is turned on, the entire cutting cycle—securing the workpiece in the hydraulic vise, activating the blade feed, lowering the cutting arm (with adjustable speed), stopping the machine after the cut, raising the arm to a preset height (adjustable), and releasing the hydraulic vise—occurs automatically. The saw arm, manufactured from a single cast iron piece, and the use of a 34 mm wide blade in this model, ensure it can efficiently cut both profiles and solid materials.
Technical specifications S-440R
MINIMUM CUTTING DIAMETER: ø5 mm
MINIMUM MATERIAL LENGTH IN VISE: 30 mm
DISTANCE FROM VISE BASE TO FLOOR: 780 mm
BLADE DIMENSIONS: 5200 × 34 × 1.1 mm
TOTAL POWER: 4.4 kW
BLADE SPEED: 20/90 m·min-1
DIMENSIONS (L x W x H): 2500 × 1900 × 1450 mm
WEIGHT: 1100 kg
Max cutting capacity [mm] S-440R
Angle
0º ø450 620 × 440 610 × 440 450 × 450
45º R ø440 500 × 190 360 × 440 420 × 420
45º L ø440 510 × 180 460 × 390 390 × 390
60º R ø330 330 × 170 170 × 440 300 × 300
60º L ø350 350 × 170 330 × 310 310 × 310
Itodpfei Dx R Nsx Af Ijb
Standard Equipment:
PLC controller
Semi-automatic cycle operation
Control console on a separate stand
Control panel with LCD display
Built-in hydraulic unit
Hydraulic arm movement control (up & down) with infinitely variable lowering speed
Arm position memory function (arm returns to a set height after cutting)
Hydraulically controlled vise jaws (long-stroke cylinder with position memory)
Mitre cutting L/R 60°–45°–0°–45°–60°
Digital angle readout
Infinitely variable blade speed (inverter)
Powered blade cleaning brush
Cooling system
Bimetallic bandsaw blade
CE Declaration of Conformity
Operation and maintenance documentation
For more information, please visit our website.
Mažas skelbimas
Siedlce
352 km
Metalo ir drožlių ištraukimas
CORMAKMDC1500 400V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Device for extracting aluminum chips (not aluminum dust), steel chips, as well as grinding dust from machines and for cleaning the workstation. The use of a side channel blower makes the device ideal for connecting to machines where large amounts of chips are produced. It is equipped with a dust filter and a container (drawer) for dispensing by-products.
Machine features:
- Fast and easy replacement of two filter cartridges
- Large container for chips and shavings
- Quick access to the collection container
- Stable and MOBILE, compact housing
- High container capacity
- Efficient extraction
Technical data:
Iodpjvuq Amefx Af Ietb
MOTOR S1 100%: 1.5 kW; S6 40%: 2.1 kW
VOLTAGE: 400 V / 50 Hz
SUCTION CONNECTORS: 2 x 100 mm
EXTRACTION CAPACITY WITHOUT BAG: 2200 m³/h
EXTRACTION CAPACITY WITH BAG/HOSE: 1500 m³/h
DIMENSIONS: 850 x 670 x 765 mm
WEIGHT: 72 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTYTAN 750S
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control via a DC inverter (frequency converter). Working parameters: turning diameter 220 mm, turning length 750 mm, motor power 1 kW at 230 V. The machine is suitable for machining external and internal cylindrical surfaces, threading, drilling, counterboring, and reaming. Ideal for use in small production facilities, workshops, or garages.
Machine Description
The TYTAN 750S 230V universal lathe, thanks to smooth spindle speed adjustment, is ergonomic and tailored to user needs. Less setup time when machining parts of various sizes translates into efficiency and user-friendliness.
S Version – electronic, stepless spindle speed regulation via a DC motor and voltage regulator. This ensures highest rotational accuracy of the chuck, delivering superior machining quality.
Main advantages:
Modern DC motor – with stepless spindle speed control for user convenience and reduced calibration time.
LCD display – features spindle speed readout for monitoring and quick modification of spindle revolutions during cutting and threading modes.
Two speed ranges – reduced (50-1125) for machining hard steels, increased (100-2500) for high-speed precision turning.
Threading capabilities – metric: 12 steps (0.4-3.5 mm), imperial: 12 steps (8-44 TPI) with the ability to cut both right- and left-hand threads.
Automatic feed – compliant with EU directives (CE), as well as Polish and DIN standards.
Full compliance – the machine is easy and convenient to operate.
Machine base available optionally
Iedsv Uplaepfx Af Iotb
Technical Specifications
Swing over bed: 220 mm
Swing over cross slide: 110 mm
Distance between centers: 750 mm
Bed width: 100 mm
Spindle bore: 38 mm
Spindle nose taper: MT5
Spindle speed adjustment: stepless
Spindle speed range: 50–2500 rpm
Number of metric threads: 12
Metric thread range: 0.4–3.5 mm
Number of imperial threads: 12
Imperial thread range: 8–44 TPI
Longitudinal feed range: 0.15–0.25 mm/rev (2)
Max tool post travel: 70 mm
Max cross slide travel: 80 mm
Max carriage travel: 630 mm
Tailstock quill travel: 60 mm
Tailstock taper: MT2
Main motor: 1000W
Tailstock bearing sleeve travel: 60 mm
Tailstock sleeve tip: MT2
Main motor: 1000W
Dimensions (L/W/H, w/o base): 1250 x 380 x 1100 mm
Weight (w/o base): 95 kg
Standard Equipment:
3-jaw chuck (125 mm)
Fixed and traveling steady rests
Change gears
Fixed center MT2
Fixed center MT4
Oil gun
Chip tray
Chuck and tool post wrenches
Operator tool set
CE-compliant safety guards
User manual in Polish
CE declaration of conformity
Optional Equipment:
Machine base
12x12 mm turning tool set (11 pcs. brazed carbide)
Live center MT2
Drill chuck arbor MT2/B16
HSS-CO5 cobalt drill set / 1-13 mm
Universal coolant system
ES-12 1L cutting oil/coolant
Mažas skelbimas
Siedlce
352 km
Elektrinis stiebo vežimėlis
CORMAKQ12E25
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Fully electric stacker with a lifting capacity of 1,200 kg and a lift height of 2,500 mm. Its clear advantage is the total height of only 1,830 mm, allowing easy access through standard doorways.
Q12E25 Stacker Features:
The fully electric stacker with a 1,200 kg lifting capacity and 2,500 mm lift height is an exceptional solution for warehousing and transport tasks. In addition to its impressive load capacity, it stands out with an exceptionally low overall height of just 1,830 mm.
Regardless of the floor type, the stacker is equipped with polyurethane wheels that ensure optimal performance on a wide range of surfaces. These wheels are highly durable, wear-resistant, and guarantee smooth and quiet movement.
An additional advantage is the possibility to select between two driving modes. This allows the operator to adapt the stacker to specific situations and requirements, improving efficiency and operational precision. Whatever the conditions or demands, the stacker guarantees reliability, safety, and operator comfort.
A robust chassis made from high-quality steel ensures greater rigidity and stability during lifting operations. The stacker is also fitted with important safety features.
The unit is equipped with an LED battery charge indicator, as well as a 'belly' emergency stop switch, preventing accidental operation towards the operator. The sealed, maintenance-free AGM battery, together with the integrated charger and rectifier, provides user convenience and minimizes battery maintenance requirements.
Furthermore, the speed controller ensures safe driving and speed limits, while the creep (turtle) mode enables precise manoeuvring in confined spaces. Lifting and lowering are fully electric and under the total control of the operator, ensuring precise and safe operations.
No technical inspections are required during the warranty period. This stacker has been solidly constructed and performs to high standards, eliminating the need for regular inspections during this time. We are confident that our stacker will meet your expectations for reliability, efficiency, and safety.
POLYURETHANE WHEELS AND ROLLERS
These rollers are characterized by high resistance to abrasion and improved protection against mechanical damage. They are versatile and perform well on various surface types. They generate minimal rolling resistance, making manoeuvring and movement over the floor much easier.
Iedpfjrh Eybex Af Iotb
Technical Specifications:
MAXIMUM LIFT HEIGHT: 2,500 mm
LIFTING CAPACITY: 1,200 kg
LOAD CENTRE: 600 mm
FORK LENGTH: 1,150 mm
OUTSIDE FORK WIDTH: 550 mm
HEIGHT WITH FORKS LOWERED: 1,830 mm
HEIGHT WITH MAST EXTENDED: 2,950 mm
LOWERED FORK HEIGHT: 85 mm
OVERALL WIDTH: 790 mm
OVERALL LENGTH: 1,800 mm
GROUND CLEARANCE: 30 mm
TURNING RADIUS: 1,390 mm
DRIVE SPEED (LOADED/UNLOADED): 3.5 / 4.0 km/h
LIFTING SPEED (LOADED/UNLOADED): 100 / 200 mm/s
LOWERING SPEED (LOADED/UNLOADED): 120 / 100 mm/s
GRADEABILITY (LOADED/UNLOADED): 3 / 10 %
SERVICE BRAKE TYPE: Electromagnetic
DRIVE MOTOR POWER: 0.75 kW
LIFT MOTOR POWER: 2.2 kW
BATTERY CAPACITY: 12V 85Ah x 2 pcs
WHEEL MATERIAL: Polyurethane
WEIGHT: 450 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTokarka uniwersalna CORMAK 310 x 900
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed adjustment. Machining capacity: 310 x 900 mm. Equipped with a modern 1.5 kW / 230 V DC motor, cooling system, and digital readout. Recommended for turning hard steels, internal and external surfaces, tapers, polishing, metric and imperial threading, drilling, and broaching. Semi-professional model, suitable for single-piece and small-batch production. Machine supplied with base.
The CORMAK 310 x 900 (TU3109V) 230V universal lathe features smooth spindle speed regulation, ensuring ergonomic operation tailored to user needs. Shorter setup times when machining a wide range of workpiece sizes translate into improved efficiency and ease of use.
Itjdpfsric Idox Af Ieb
VARIO Version – electronic, infinitely variable spindle speed control via DC motor and voltage regulator, providing optimal spindle chuck rotational accuracy for superior machining quality.
The modern DC motor with stepless spindle speed control offers ease of use and reduced setup times. Smooth and efficient drive with excellent rotational speed and torque characteristics.
LCD display shows spindle speed, enabling direct monitoring and quick speed adjustments during selection of cutting and threading modes.
Two spindle speed ranges: low (80–1000 rpm) for machining hard steels and high (160–2000 rpm) for high-speed precision turning.
Easy regulation of spindle speed and automatic feed via ergonomic gearbox control panel.
Bed with induction-hardened and ground guideways. 180 mm bed width ensures stable and precise working conditions.
Wide threading range (right and left threads): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI.
Automatic longitudinal feed: 0.085–1.832 (9) mm/rev., and cross feed: 0.010–0.100 (9) mm/rev., to reduce machining time and improve quality when turning long workpieces.
38 mm spindle bore allows optimal machining performance on large-diameter shafts.
Compound slide with graduated scale, swivels ±45°, tailstock set-off ±10 mm for taper turning.
Hardened and ground spindle gearbox gears.
Leadscrew and feed shaft for threading, as well as automatic longitudinal and cross feed.
Cooling system and 2-axis digital readout included as standard.
Machine fully compliant with EU (CE), Polish regulations, and DIN standards.
Mažas skelbimas
Siedlce
352 km
Elektrinis padėklų vežimėlis
CORMAKQ15-4
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Electric Pallet Truck 1500 kg – Modern Solution for Internal Transport
The CORMAK electric pallet truck, also known as an electric pallet jack, electric warehouse truck, or electric pallet mover, is an indispensable piece of equipment for any warehouse, shop, wholesale warehouse, or production facility. With a 1500 kg load capacity, this model combines compact dimensions with high power and efficiency, ensuring fast and safe pallet transport over short and medium distances.
This pallet truck features both electric drive and electric lift, eliminating the need for manual pumping and pushing, greatly improving workplace ergonomics. It is ideal for locations where precision, quiet operation, and maximum efficiency are key.
Modern 24V 20Ah Lithium-Ion Battery
The integrated 24V 20Ah lithium-ion battery guarantees long service life, short charging time, and no maintenance requirements. Unlike traditional lead-acid batteries, Li-Ion cells allow for opportunity charging at any time of day without risking reduced battery lifespan, so the truck is always ready for use.
The side-mounted battery position further enhances device durability. This design effectively protects the battery from moisture, dust, and weather conditions, which is crucial when operating in cold rooms, on loading ramps, or in open warehouse spaces.
This all-metal pallet truck boasts outstanding resistance to mechanical damage. The robust steel construction makes it ideal for demanding environments – construction sites, workshops, or industrial plants where durability and operator safety are priorities.
Key Advantages of the Pallet Truck:
• Electric drive and lifting – minimal operator effort
• 1500 kg load capacity – suitable for most standard pallets
• 24V 20Ah lithium-ion battery – fast charging, extended operating times
• Side battery installation – improved protection and easier service
• Full metal construction – durability in tough working conditions
• Compact and agile design – excellent maneuverability in narrow aisles
• Low noise level and zero emissions – eco-friendly alternative to combustion models
Electric Pallet Truck for Warehouses, Retail, and Production
This 1500 kg electric pallet truck is the perfect combination of performance and reliability. It excels wherever operational efficiency and operator safety count most. Whether you are looking for an electric pallet truck, a warehouse truck with electric drive, or an automatic pallet mover, this model offers maximum operator comfort and low operating costs.
Isdpfx Afoxphq Hs Ijtb
Technical Specifications
Model: Q15-4
Load capacity: 1500 kg
Fork height raised: 200 mm
Fork height lowered: 85 mm
Overall length: 1670 mm
Fork length: 1150 mm
Width: 560 mm
Minimum aisle width: 1920 mm
Turning radius: 1480 mm
Travel speed (laden/unladen): 3.8 / 4.2 km/h
Max. gradeability (laden/unladen): 2 / 6 %
Drive motor power: 0.75 kW
Battery: 24 V / 20 Ah
Net weight: 131 kg
Mažas skelbimas
Siedlce
352 km
Metalo šlifavimo stalas
CORMAKDT1500M
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Grinding Table DT1500M – Professional Workstation for Metal Grinding
The DT1500M grinding table is a modern solution designed for intensive metalworking and industrial tasks that require effective extraction of dust and fumes. Thanks to two independent fans and a highly efficient filtration system, this grinding table ensures a high level of workplace safety and environmental protection. It is an ideal solution for industrial plants, mechanical workshops, paint shops, and metalworking studios.
Key machine features
- Dual filtration system – effectively captures over 99.9% of dust particles, protecting the operator and surroundings.
- High ventilation efficiency – two centrifugal fans with a total capacity of 8,000 m³/h.
- Eleven segmented work surface sections – ensure work comfort and facilitate filter cleaning.
- Bottom and side ventilation – efficient extraction of contaminants from various work zones.
- Metal drawers on the left and right sides – allow for easy disposal of grinding waste.
- Heat-resistant filters – provide durability even under demanding conditions.
Itjdjw Hcrpopfx Af Ieb
Design and technology
The DT1500M grinding table is built from a sturdy, welded steel construction, resistant to vibrations and mechanical damage. Integrated twin suction units and a dual filtration system guarantee quiet, reliable operation, while the modular segmental worktop design simplifies both workpiece setup and device servicing.
Precision and work efficiency
Equipped with high-performance centrifugal fans and precise filtration systems, the DT1500M allows uninterrupted and safe operation even during intensive grinding of metal components. Thanks to noise-reducing elements and an ergonomic airflow design, the table is both efficient and operator-friendly.
Application
The DT1500M model is used wherever harmful metal particles and dust need to be removed – both in metalworking shops and in paint shops, assembly lines, and industrial facilities using grinding tables for daily parts processing.
Standard equipment
- Dual air filtration system
- Two centrifugal fans (left and right side)
- Metal waste drawers
- Segmented worktop
- Ventilation system with bottom and side extraction
Technical specifications
Worktop dimensions: 1530 x 510 mm
Motor power: 2 x 0.75 kW
Capacity: 2 x 4000 m³/h
Filter dimensions: 2 x (395 x 495 x 24 mm)
Voltage: 230V
Weight: 102 kg
Overall dimensions: 1560 x 560 x 850 mm
Mažas skelbimas
Siedlce
352 km
Elektrinis stiebo vežimėlis
CORMAKQ12E30
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The Q12E30 electric stacker is the ideal machine for loading and unloading goods. With a lifting capacity of 1,200 kg and electric lifting up to 3 meters, it allows for fast and safe stacking of goods. The stacker comes standard with two driving modes: fast and "turtle mode," which enables precise maneuvering.
Q12E30 Stacker Features:
The Q12E30 electric stacker is an advanced technological solution that is very easy to operate. Standard safety features include an emergency stop and overload valves.
This high-lift stacker is constructed from top-quality materials, ensuring rigidity and stability during lifting and transport operations. It is equipped with an integrated LED battery charge indicator and onboard charger with rectifier. The core of this stacker consists of sealed, maintenance-free AGM batteries, providing reliability and increased efficiency.
Isdpfx Ajrh Ey Uef Istb
During the warranty period, no scheduled maintenance is required to maintain the warranty coverage, making the stacker easier to operate and reducing maintenance costs.
By delivering equipment of the highest quality and performance, we prioritize innovation and customer satisfaction. The Q12E30 stacker exemplifies advanced technology that not only ensures workplace safety but also accelerates warehouse processes.
The wheels and rollers are made from highly durable, abrasion-resistant polyurethane, providing exceptional service life and resistance to various mechanical damage.
Technical Specifications
MAX LIFTING HEIGHT: 3000 mm
LOAD CAPACITY: 1200 kg
LOAD CENTER: 600 mm
FORK LENGTH: 1150 mm
OUTSIDE FORK WIDTH: 550 mm
HEIGHT WITH LOWERED FORKS: 2080 mm
MAST HEIGHT WHEN RAISED: 3550 mm
FORK HEIGHT (LOWERED): 85 mm
OVERALL WIDTH: 800 mm
OVERALL LENGTH: 1800 mm
GROUND CLEARANCE: 30 mm
TURNING RADIUS: 1390 mm
DRIVING SPEED WITH LOAD / WITHOUT LOAD: 3.5/4 km/h
LIFTING SPEED WITH LOAD / WITHOUT LOAD: 100/200 mm/s
LOWERING SPEED WITH LOAD / WITHOUT LOAD: 120/100 mm/s
GRADEABILITY WITH LOAD / WITHOUT LOAD: 3/10 %
SERVICE BRAKE TYPE: Electromagnetic
DRIVE MOTOR POWER: 0.75 kW
LIFT MOTOR POWER: 2.2 kW
BATTERY VOLTAGE / CAPACITY: 12V 85Ah, 2 units
WHEEL MATERIAL: Polyurethane
WEIGHT: 460 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKGOLIAT 660X2000YB WOLNE OBROTY
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The CORMAK 660 x 2000 (CJ6266YB/2000) universal lathe is a versatile machine delivering outstanding precision for low-speed turning of various materials. It is perfectly suited for machining internal and external surfaces, taper turning, polishing, threading (metric, imperial, module, and DP), as well as drilling and broaching.
The slow rotation rates make this lathe an excellent choice for tasks demanding maximum accuracy and operational stability.
Robust construction
The lathe bed is made from high-quality cast iron, providing excellent vibration damping — a key factor for low-speed operations. With its induction-hardened and precision-ground bed, the lathe offers exceptional resistance to torsion and vibrations, enabling precise turning even at the lowest spindle speeds.
Advanced features
- Centralized feed shift system, including lead screw and feed shaft, allows efficient threading operations even at low spindle speeds.
- Accelerated longitudinal and cross feeds are easily controlled by joystick, facilitating precise machining, especially at slow speeds.
- Three-axis digital readout (longitudinal, cross, and compound slide) displayed on-screen enables tight control of every lathe movement, crucial during low-speed operations.
- High-quality bearing system with ball bearings and modern main spindle support ensure stability and operator safety.
Ijdjvxgc Dspfx Af Ietb
Performance and precision
Thanks to a large spindle bore (82 mm), 2000 mm centre distance, 315 mm 3-jaw chuck, and a powerful 7.5 kW motor, the CORMAK lathe guarantees high machining efficiency, even at reduced speeds. The rapid longitudinal and cross feed system significantly shortens working time, while still allowing for precise detailing at low rotational speeds.
Technical specifications
- Swing over bed [mm]: 660
- Swing over cross slide [mm]: 440
- Swing in gap [mm]: 900
- Length of gap [mm]: 250
- Centre distance [mm]: 2000
- Bed: induction-hardened
- Bed width [mm]: 400
- Chuck diameter [mm]: 315
- Spindle bore [mm]: 82
- Spindle nose [mm]: D1 - 8
- Spindle taper [mm]: 113 (1:20) / MT5
- Spindle speed range [rpm]: 9 - 1600, 24 steps
- Max tool dimensions [mm]: 25 x 25
- Longitudinal feed range [mm/rev]: 0.044 - 1.48
- Cross feed range [mm/rev]: 0.022 - 0.74
- Metric threads [mm]: 0.45 - 120
- Imperial threads: 7/16 - 80 TPI
- Module threads: 0.25 - 60 MP
- DP threads: 7/8 - 160 DP
- Rapid feed [m/min]: longitudinal 4.2; cross 1.9
- Tailstock quill diameter [mm]: 90
- Tailstock quill stroke [mm]: 235
- Tailstock taper: MT 5
- Main motor power S1/S6 [kW]: 7.5 / 9
- Coolant pump power [kW]: 0.1
- Dimensions (L x W x H) [mm]: 3710 x 1135 x 1440
- Net weight [kg]: 3600
Mažas skelbimas
Siedlce
352 km
Elektrinis šakinis krautuvas
CORMAKW16E45
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The electric forklift represents an innovative combination of advanced technology, performance, and ergonomics, meeting the highest standards in the logistics and warehousing sectors. Featuring electric drive, it delivers quiet, emission-free operation, making it an ideal solution for use inside warehouses, production halls, and anywhere ecological considerations and user comfort are a priority. The absence of exhaust fumes eliminates the need for additional ventilation, while the low noise level improves working conditions for the operator and the entire team. Included as standard equipment is a high-capacity battery and charger!
The electric motor is characterized by high efficiency and low energy consumption, resulting in long operating times on a single charge and lower operating costs compared to internal combustion forklifts.
AGM batteries also offer extended service life, high resistance to deep discharges, and rapid charging times, which minimizes downtime and increases workplace efficiency. This solution results in lower operational costs and enhanced reliability during day-to-day use.
Isdpfx Afswayubs Ijtb
A maximum lifting capacity of 1,600 kg allows for effortless transport of a wide range of loads, from pallets to non-standard items requiring robust support and stability. The 4,500 mm lifting height makes optimal use of warehouse space possible, enabling goods to be stored on high racks and increasing order-picking efficiency.
The compact and robust design ensures excellent maneuverability even in narrow warehouse aisles and between racking, allowing for precise handling in restricted spaces.
The forklift is equipped with sideshift and fork tilt functions, significantly increasing its versatility and precision during load handling. The sideshift enables precise fork positioning without moving the entire truck, streamlining loading and unloading operations, especially in confined areas. The fork tilt function ensures secure lifting and placement of goods, minimizing the risk of load shift or damage.
Thanks to durable materials and a solid construction, the forklift is resistant to intensive use and changing working conditions. High build quality and attention to detail contribute to reliability and minimal maintenance requirements. Every component has been designed to maximize operational efficiency, reducing unnecessary downtime and increasing productivity in dynamic warehouse environments.
Set includes:
- Built-in batteries
- Charger
Technical specifications
Load capacity: 1,600 kg
Maximum fork height raised: 4,500 mm
Fork height lowered: 80 mm
Fork length: 1,070 mm
Sideshift: Yes
Mast tilt: Yes
Turning radius: 1,495 mm
Wheel diameter: 305/145 mm and 250/120 mm
Battery voltage/rated capacity: 24 V 320 Ah
Continuous operating time on fully charged battery: up to 10 h
Charging time: 10 h
Drive motor power: 2.2 kW
Lift motor power: 3.3 kW
Brake: Electromagnetic
Travel speed loaded/unloaded: 6.4 / 7.2 km/h
Wheel type: Rubber
Weight: 2,600 kg
Mažas skelbimas
Siedlce
352 km
Metalo drožlių nutraukėjas su žarnomis
CORMAKMDC800
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Metal Swarf and Chip Extractor MDC800 230V
The MDC800 metal extractor is a professional-grade device designed for the efficient extraction of swarf, chips, and dust generated during metalworking processes. With high performance, a robust construction, and user-friendly operation, this model offers reliable support for grinding and production stations where continuous cleanliness control is essential.
Key Features
- High extraction capacity – airflow up to 1800 m³/h ensures effective removal of even large quantities of metal chips.
- Versatile application – ideal for extracting chips and swarf from grinders, polishers, and other metalworking equipment.
- Compact and stable design – rigid steel housing ensures safe operation and minimizes vibration.
- Quick access to the collection container – allows easy emptying and reduces downtime.
- Easy filter replacement – convenient and straightforward access.
Design and Technology
The MDC800 is engineered for heavy-duty, continuous use in industrial environments. Its robust 0.75 kW motor operates at 2800 rpm, providing consistent and reliable airflow. The dual suction port system (2 × 100 mm) allows simultaneous connection of two workstations, significantly enhancing workplace efficiency.
The large 325 mm impeller diameter increases the entire system’s aerodynamic efficiency and allows for extraction of larger metal chip fractions without clogging. The large-capacity collection bin supports long operating cycles without frequent emptying.
Precision and Performance
The MDC800 metal chip extractor ensures uniform and stable airflow whether one or both inlets are used. With extraction performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet), it efficiently captures most contaminants generated during grinding, drilling, milling, and other machining operations.
Applications
This unit is ideally suited as:
- An extractor for bench and belt grinders
- A chip and swarf extractor in metal fabrication workshops
- A metal dust extraction system in tool shops
- A component of extraction installations for polishing and deburring processes
Standard Equipment
- Large-capacity chip collection bin
- Replaceable filter
- Dual 2 × 100 mm suction ports
- Stable, compact steel casing
Itjdsx E Udhopfx Af Isb
Technical Data
Motor: 0.75 kW, 230V
Speed: 2800 rpm
Suction ports: 2 × 100 mm
Single inlet capacity: 1800 m³/h
Dual inlet capacity: 1520 m³/h
Impeller diameter: 325 mm
Chip bag size: 330 × 500 mm
Dimensions: 580 × 480 × 1016 mm
Weight: 55 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKGOLIAT 660X4000
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Industrial Metal Lathe CORMAK GOLIAT 660 x 4000 mm – robust cast iron bed construction, equipped with a 12-speed gearbox and a powerful 7.5 kW / 400V induction motor – maximum torque and large spindle bore of 105 mm.
Main Features:
- Central feed shifting system, equipped with leadscrew and feed shaft for threading.
- Digital readout operates on three axes: longitudinal, cross, and top slide. The processed electronic signal from optical scales visualizes movement values along the axes on the digital display.
- The lathe is fitted with a high-quality, reinforced spindle bearing system. The main spindle uses modern ball bearings.
- Optimum performance is ensured by a large spindle bore of 105 mm, 4000 mm centre distance, 320 mm three-jaw chuck, and a powerful 7.5 kW motor.
- The rapid longitudinal and cross feed system significantly reduces machining time and increases productivity.
- Hardened and ground gears in the headstock ensure long-term operational stability.
- Equipped with leadscrew and feed shaft for thread cutting, automatic longitudinal and cross feeds.
- Easy adjustment of spindle speed and automatic feed from ergonomic control panel on the gearbox.
- Wide threading range without the need to change gears in the quick-change gearbox. Extensive threading range: metric (22) 1 – 14 mm, imperial (25) 2-28 TPI, module (18) 0.5-7 M.P., DP (24) 4-56 D.P. Capable of cutting right and left-hand threads.
- Threading dial for precise thread pitch counting. This function saves time, enabling rapid disengagement of the leadscrew nut to quickly return the carriage to its original position by hand in several passes.
- The bed is fitted with a removable gap bridge for turning large workpieces such as discs. This lathe model allows machining of up to 870 mm maximum diameter with the gap bridge removed.
Technical Data
Maximum turning diameter over bed: Ø660 mm
Maximum turning diameter over carriage: Ø420 mm
Maximum turning diameter in gap: Ø870 mm
Gap length: 240 mm
Centre distance: 4000 mm
Maximum turning length: 3950 mm
Spindle bore: Ø105 mm
Spindle nose diameter and taper: Ø113 mm 1:20
Spindle mount: D1-8 CAMLOCK
Spindle speeds: 12 speeds (36-1600 rpm)
Number and range of longitudinal feeds: 65 (0.063-2.52 mm/rev)
Number and range of cross feeds: 65 (0.027-1.07 mm/rev)
Metric threads: 22 (1-14 mm)
Imperial threads: 25 (28-2 TPI)
Module threads: 18 (0.5-7 mm)
DP threads: 24 (56-4 DP)
Rapid longitudinal feed: 4.5 m/min
Rapid cross feed: 1.9 m/min
Iodevw Abgjpfx Af Ijtb
Leadscrew pitch: 12 mm
Spindle axis to tool surface distance: 28 mm
Tool size: 25x25 mm
Maximum top slide travel: 145 mm
Maximum cross slide travel: 380 mm
Tailstock quill diameter: 75 mm
Tailstock taper: MT5
Maximum tailstock quill travel: 150 mm
Tailstock offset: ±15 mm
Main motor S1/S6: 7.5/9 kW / 400V
Rapid feed motor: 250 W
Coolant pump: 60 W, 25 L/min
Overall dimensions (L/W/H): 5500 x 1100 x 1450 mm
Weight: 5,200 kg
Mažas skelbimas
Siedlce
352 km
Metalo ir drožlių ištraukimas
CORMAKMDC750 230V/400V
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Device for extracting aluminum chips and shavings (not aluminum dust), steel chips from machines, as well as for cleaning the workplace. The use of a side channel blower makes the device ideal for connecting to machines where a large amount of chips is generated. It is equipped with a dust filter and a container (drawer) for emptying the collected by-products.
Machine Features
Iodpfx Aevugghjf Iotb
- Quick and easy filter replacement
- Large container for chips and shavings
- Fast access to the collection container
- Stable, compact housing
- Large container capacity
- Efficient extraction
Technical Data
MOTOR: 0.75 kW
VOLTAGE: 230V or 400V / 50 Hz
SUCTION INLETS: 1 x 100 mm
EXTRACTION CAPACITY (WITHOUT BAG): 1800 m³/h
EXTRACTION CAPACITY (WITH BAG): 1520 m³/h
IMPELLER DIAMETER: 350 mm
DIMENSIONS: 870 x 560 x 1170 mm
WEIGHT: 31 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTORNADO 460x1500
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Industrial metal lathe CORMAK TORNADO 460x1500 – featuring a cast base twice the standard thickness and a robust cast iron bed, equipped with a 12-speed gearbox and a powerful 5.5 kW / 400V induction motor delivering maximum torque and a large 82 mm spindle bore.
Key advantages:
- Versatility of applications: This lathe is perfect for a wide variety of tasks, including internal and external turning, taper turning, threading (metric, inch, module, DP), polishing, drilling, and broaching.
- Stable construction: The 300 mm wide cast iron bed is hardened and precisely ground, ensuring substantial vibration reduction and stable operating conditions even under heavy loads.
- Digital precision: The machine is fitted with a dual-axis digital readout (longitudinal and cross) displaying precise displacement values on screen via optical measuring scales.
- High-quality spindle: A reinforced bearing system and large 82 mm spindle bore ensure optimal performance. Included are a 3-jaw chuck (250 mm), a 4-jaw chuck (320 mm), and a 5.5 kW motor.
- Efficiency and productivity: Rapid longitudinal and cross feed via joystick significantly reduces machining time, while hardened and ground gears in the spindle gearbox guarantee durability and long-term reliability.
- Wide threading capability: Thread cutting functions for metric, inch, module, and DP threads (right and left-handed) with adjustable parameters without gear wheel changes, for faster and more convenient operation. Supported threads include: metric (41 ranges) from 0.1 to 14 mm, inch (60 ranges) from 2 to 112 TPI, module (34 ranges) from 0.1 to 7 M.P., and DP (50 ranges) from 4 to 112 D.P.
- Precise thread counting: Equipped with a thread dial indicator, enabling quick repositioning of the carriage after disengaging the leadscrew nut.
- Ergonomics and ease of use: An intuitive control panel on the gearbox allows for quick adjustments of spindle speed and automatic feed rate.
- Large workpiece capability: The removable gap bed section enables turning of workpieces up to 690 mm in diameter and 240 mm in length (with gap removed), expanding the machine’s capabilities.
Technical specifications:
Turning diameter over bed ø460 mm
Turning diameter over cross slide ø274 mm
Itodpfx Afsvzzqbe Ijb
Turning diameter with gap (diameter x width) 690 mm x 240 mm
Centre height 230 mm
Distance between centres 1500 mm
Bed width 300 mm
Max tool shank size 25 x 25 mm
Total cross slide travel 290 mm
Total top slide travel 120 mm
Spindle bore diameter ø82 mm
Spindle nose D1-8
Spindle taper ø90 (1:20)
Number of spindle speeds 12
Spindle speed range 25–2000 rpm
Lead screw diameter and pitch ø35 mm x 6 mm
Imperial threads Pitch 2–112 TPI (60)
Metric threads 0.1–14 mm (41)
DP gears 4–112 D.P. (50)
Module gears 0.1–7 M.P. (34)
Longitudinal feed 0.031–1.7 mm/rev (42)
Cross feed 0.014–0.784 mm/rev (42)
Tailstock quill travel 120 mm
Tailstock quill diameter ø60 mm
Quill taper MT No. 4
Spindle drive motor 5.5 kW
Coolant pump motor 0.09 kW
Machine dimensions (LxWxH) 2720 x 1040 x 1340 mm
Weight 2445 kg
Mažas skelbimas
Siedlce
352 km
Metalo ir drožlių ištraukimas
CORMAKMDC750 230V
Skambinti
Sąlyga: naudotas, Gamybos metai: 2025, Įrenginys skirta aliuminio (ne dulkių), plieno drožlių ir skiedrų nutraukimui nuo staklių bei darbo vietos valymui. Šoninė turbina daro įrenginį idealiu prijungimui prie staklių, kur susidaro didelis kiekis skiedrų. Įrenginys turi dulkių filtrą ir konteinerį (stalčių) šalutiniams produktams išpilti.
Mašinos charakteristikos:
Greitas ir lengvas filtro keitimas
Didelis drožlių ir skiedrų konteineris
Greita prieiga prie surinkimo konteinerio
Stabili, kompaktiška korpusas
Itedpfoxzrzaox Af Isb
Didelė talpa
Efektyvus siurbimas
Techniniai duomenys:
VARIKLIS: 0,75 kW
ĮTAMPA: 230 V / 50 Hz
SIURBIMO ANTGALIS: 1 x 100 mm
SIURBIMO GALIA BE MAIŠO: 1800 m³/h
SIURBIMO GALIA SU MAIŠU: 1520 m³/h
SPARNUOTĖS SKERSMUO: 350 mm
MATMENYS: 870 x 560 x 1170 mm
SVORIS: 31 kg
Pastaba!! Mašina grąžinta. Mechaniniai korpuso pažeidimai, pažeista elektros dėžutė.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Siedlce
352 km
Rankinės giljotininės žirklės
CORMAKHS-1000
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, HS-1000 Manual Guillotine Shears
Guillotine shear, sabre shears for sheet metal, soft materials, linoleum, and plastics
Robust machine construction and the use of an exceptionally thin steel blade ensure high cutting precision for various components.
Machine operation does not require significant force
Technical specifications:
Cutting length: 1000 mm
Sheet thickness: 1.5 mm
Dimensions: 1365x500x1700 mm
Itedpfx Afjvzqluo Iob
Weight: 70 kg
Mažas skelbimas
Siedlce
352 km
Elektrinis stiebo vežimėlis
CORMAKQ12E16
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, The electric mast pallet truck is a reliable and advanced machine that offers convenience and efficiency in moving loads up to 1200 kg.
Product features:
From the outset, our goal in designing the Q12E16 electric mast truck was to create a working tool that would enable both loading and unloading goods in confined spaces. That’s why we focused on compact dimensions and a load capacity of up to 1200 kg, allowing work in areas where other machines struggle to maneuver. We have also provided a lifting height of 1600 mm and two operating modes: fast and “turtle” mode.
Increased rigidity and stability during lifting translate into workplace safety and allow seamless movement of challenging goods—thanks to a robust frame made of high-quality steel, which ensures the truck’s extended service life. The safety cut-off switch is vital for operator and machine protection.
We do not require service inspections during the warranty period, meaning our Q12E16 unit is not only reliable but also economical to operate. All these features ensure efficient and safe working conditions.
The AGM battery is characterized by lower self-discharge compared to conventional lead-acid batteries, ensuring the Q12E16 truck is ready for use immediately after charging. Moreover, the battery is sealed, which eliminates the risk of acid leakage and simplifies both transport and maintenance. We chose this type due to its greater resistance to extreme temperatures, shocks, and vibrations.
The integrated charger enables battery charging wherever there is access to a power socket. This means the operator can recharge the battery during work breaks or while transporting the unit, ensuring continuous and efficient operation. The LED battery charge indicator informs the operator of the current battery level, so the battery can be recharged at the right time for workflow continuity. Additionally, the Q12E16 mast truck is equipped with an “emergency belly switch” for operator protection—to prevent accidents such as being run over by the unit.
Technical specifications
MAXIMUM LIFTING HEIGHT: 1600 mm
LOAD CAPACITY: 1200 kg
LOAD CENTRE: 600 mm
FORK LENGTH: 1150 mm
FORK OUTER WIDTH: 550 mm
HEIGHT WITH LOWERED FORKS: 2080 mm
HEIGHT WITH EXTENDED MAST: 2080 mm
HEIGHT WITH LOWERED FORKS: 85 mm
TOTAL WIDTH: 790 mm
TOTAL LENGTH: 1800 mm
GROUND CLEARANCE: 30 mm
TURNING RADIUS: 1390 mm
TRAVEL SPEED WITH/WITHOUT LOAD: 3.5 / 4.0 km/h
LIFTING SPEED WITH/WITHOUT LOAD: 100/200 mm/s
LOWERING SPEED WITH/WITHOUT LOAD: 120/100 mm/s
GRADEABILITY WITH/WITHOUT LOAD: 3/10 %
SERVICE BRAKE TYPE: Electromagnetic
DRIVE MOTOR POWER: 0.75 kW
LIFTING SYSTEM MOTOR POWER: 2.2 kW
BATTERY CAPACITY: 12V 75Ah, 2 pcs
WHEEL MATERIAL: Polyurethane
Ijdpjrh Expofx Af Iotb
WEIGHT: 380 kg
Mažas skelbimas
Siedlce
352 km
Elektrinis stiebo vežimėlis
CORMAKQ15E35
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Electric mast stacker with 1,500 kg capacity and 3,500 mm lifting height is an ideal warehouse solution for handling heavy loads. The robust steel construction ensures stability during lifting operations. Polyurethane rollers facilitate movement on uneven surfaces. This stacker enables fast and safe load transfer across multiple levels and in various conditions.
Introduction to Electric Mast Pallet Stackers
The CORMAK Q15E35 electric mast stacker is a versatile and highly efficient solution for material handling and lifting up to a height of 3.5 meters. Thanks to its innovative design and advanced technology, this stacker is perfect for use in warehouses, production halls, and distribution centers.
Key Benefits of the 1,500 kg Electric Pallet Stacker
This model’s technical parameters include a lifting capability of an impressive 3,500 mm, allowing for effective handling of goods at various heights. With a lifting capacity of 1,500 kg, it is ideal for managing medium to heavy loads.
Machine Features
- Sturdy high-grade steel frame ensures greater rigidity and stability during lifting.
- Special handle system transmits steering input directly to the wheel for precise maneuvering.
- Integrated battery charger.
- Lifting forks to maximum height without load takes just 25 seconds!
- Maintenance-free brushless motor technology.
- Battery charge indicator integrated in the control box.
- Emergency stop switch.
- Integrated controller protects the battery from over-discharge or damage.
- Sealed, maintenance-free AGM battery.
- No periodic maintenance required during the warranty period.
Technical Specifications
MAX LIFTING HEIGHT: 3,500 mm
CAPACITY: 1,500 kg
LOAD CENTER: 600 mm
FORK LENGTH: 1,150 mm
OUTSIDE FORK WIDTH: 570 mm
HEIGHT WITH LOWERED FORKS: 2,330 mm
HEIGHT WITH EXTENDED MAST: 4,000 mm
MINIMUM FORK HEIGHT: 85 mm
OVERALL WIDTH: 810 mm
OVERALL LENGTH: 1,745 mm
Itjdpjrh E D Uofx Af Ieb
GROUND CLEARANCE: 30 mm
TURNING RADIUS: 1,390 mm
TRAVEL SPEED (LOADED/UNLOADED): 3.5/4 km/h
LIFTING SPEED (LOADED/UNLOADED): 140/200 mm/s
LOWERING SPEED (LOADED/UNLOADED): 120/100 mm/s
GRADABILITY (LOADED/UNLOADED): 5/7%
SERVICE BRAKE TYPE: Electromagnetic
DRIVE MOTOR POWER: 0.75 kW
LIFT MOTOR POWER: 2 kW
BATTERY VOLTAGE / CAPACITY: 12V 75 and 120 Ah
WHEEL MATERIAL: Polyurethane
WEIGHT: 586 kg
Mažas skelbimas
Siedlce
352 km
Universalus metalo tekinimo staklės
CORMAKTORNADO 360x1000
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, CORMAK 360 Metal Lathe – New, Upgraded Model!
The CORMAK 360 metal lathes are a new and improved version of the popular machines for metalworking. Upgrades include an enhanced tool post guard, improved spindle bearing system, and a new digital readout. These lathes are suitable for production facilities, workshops, and toolrooms, making them ideal for small batch and one-off production.
Key Upgrades:
- High-quality, reinforced spindle bearing system
- New CE-compliant guard system
- Latest axis digital readout model
- Reinforced and modernized lathe base with tool drawers and chip tray
Machine Features
- Reinforced, ribbed bed for maximum vibration reduction; precision ground and hardened
- Digital axis readout as standard
- Large spindle bore (52 mm) ensures optimal machining performance
- Adequate bed width for stable and precise operation
- The machine is equipped with a high-quality, reinforced spindle bearing system
- Efficient machining thanks to two automatic feeds and lead screw/feed shaft equipment
- Hardened gears in the spindle gearbox
- Adjustable overload clutch on the lead shaft
Iedpfx Aoiz S R Nof Ietb
- Full thread cutting range without changing gear wheels
- Feed selection lock: by screw or by shaft
- Removable gap bridge for machining workpieces of increased diameter
- Removable chip tray and tool drawers for improved workflow
Technical Specifications
- Max turning diameter: 360 mm
- Max turning diameter over carriage: 220 mm
- Max turning diameter in gap: 490 mm
- Max turning length in gap: 168 mm
- Turning length between centres: 970 mm
- Bed width: 187 mm
- Spindle nose: D1-4
- Spindle bore: 52 mm
- Spindle speed range: 90-2000 rpm
- Number of spindle speed ranges: 8
- Longitudinal feed range: 0.055 – 1.291 mm/rev
- Cross feed range: 0.014 – 0.345 mm/rev
- Max tool size: 16 x 16 mm
- Metric thread: 0.4 – 7 mm
- Imperial thread: 4 – 60 TPI
- Tailstock quill diameter: 32 mm
- Tailstock quill taper: MT3
- Main motor power: 1.5 kW
- Coolant pump power: 0.1 kW
- Weight: 570 kg
- Dimensions: 1890 x 720 x 1500 mm
Standard Equipment
- Digital axis readout
- 3-jaw lathe chuck (200 mm)
- 4-jaw lathe chuck (200 mm)
- Faceplate
- Fixed steady
- Travelling steady
- Reducing sleeve
- Fixed centre
- Coolant system
- Work light
- Change gear set
- Thread dial indicator
- Service tools
- Lathe base
- Operating manual (Polish)
- EC/CE declaration of conformity
- Brand new machine – full warranty
For more information, please visit our website.
Palengviname jums paiešką: "elektriniai metalo žirklės"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Elektriniai Metalo Žirklės (38 841)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Elektrinis Genėjimo Žirklės
- Elektrinių Automobilių Centras
- Elektrinės Viryklės
- Hidraulinės Metalo Žirklės
- Lakštinio Metalo Gradowania Mašina
- Lakštinio Metalo Lankstymas
- Lakštinio Metalo Lentynos
- Lakštinio Metalo Plokštė Lentynos
- Lakštinio Metalo Ritinio

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo





































































































































































