Elektriniai Metalo Žirklės pirkti naudotą (38 810)

Sąlyga: naujas, Gamybos metai: 2025, The electric mast pallet truck is a reliable and advanced machine that offers convenience and efficiency in moving loads up to 1200 kg. Product features: Lsdpferh Expsx Af Iehb From the outset, our goal in designing the Q12E16 electric mast truck was to create a working tool that would enable both loading and unloading goods in confined spaces. That’s why we focused on compact dimensions and a load capacity of up to 1200 kg, allowing work in areas where other machines struggle to maneuver. We have also provided a lifting height of 1600 mm and two operating modes: fast and “turtle” mode. Increased rigidity and stability during lifting translate into workplace safety and allow seamless movement of challenging goods—thanks to a robust frame made of high-quality steel, which ensures the truck’s extended service life. The safety cut-off switch is vital for operator and machine protection. We do not require service inspections during the warranty period, meaning our Q12E16 unit is not only reliable but also economical to operate. All these features ensure efficient and safe working conditions. The AGM battery is characterized by lower self-discharge compared to conventional lead-acid batteries, ensuring the Q12E16 truck is ready for use immediately after charging. Moreover, the battery is sealed, which eliminates the risk of acid leakage and simplifies both transport and maintenance. We chose this type due to its greater resistance to extreme temperatures, shocks, and vibrations. The integrated charger enables battery charging wherever there is access to a power socket. This means the operator can recharge the battery during work breaks or while transporting the unit, ensuring continuous and efficient operation. The LED battery charge indicator informs the operator of the current battery level, so the battery can be recharged at the right time for workflow continuity. Additionally, the Q12E16 mast truck is equipped with an “emergency belly switch” for operator protection—to prevent accidents such as being run over by the unit. Technical specifications MAXIMUM LIFTING HEIGHT: 1600 mm LOAD CAPACITY: 1200 kg LOAD CENTRE: 600 mm FORK LENGTH: 1150 mm FORK OUTER WIDTH: 550 mm HEIGHT WITH LOWERED FORKS: 2080 mm HEIGHT WITH EXTENDED MAST: 2080 mm HEIGHT WITH LOWERED FORKS: 85 mm TOTAL WIDTH: 790 mm TOTAL LENGTH: 1800 mm GROUND CLEARANCE: 30 mm TURNING RADIUS: 1390 mm TRAVEL SPEED WITH/WITHOUT LOAD: 3.5 / 4.0 km/h LIFTING SPEED WITH/WITHOUT LOAD: 100/200 mm/s LOWERING SPEED WITH/WITHOUT LOAD: 120/100 mm/s GRADEABILITY WITH/WITHOUT LOAD: 3/10 % SERVICE BRAKE TYPE: Electromagnetic DRIVE MOTOR POWER: 0.75 kW LIFTING SYSTEM MOTOR POWER: 2.2 kW BATTERY CAPACITY: 12V 75Ah, 2 pcs WHEEL MATERIAL: Polyurethane WEIGHT: 380 kg

Sąlyga: naujas, Gamybos metai: 2025, Electric mast stacker with 1,500 kg capacity and 3,500 mm lifting height is an ideal warehouse solution for handling heavy loads. The robust steel construction ensures stability during lifting operations. Polyurethane rollers facilitate movement on uneven surfaces. This stacker enables fast and safe load transfer across multiple levels and in various conditions. Introduction to Electric Mast Pallet Stackers The CORMAK Q15E35 electric mast stacker is a versatile and highly efficient solution for material handling and lifting up to a height of 3.5 meters. Thanks to its innovative design and advanced technology, this stacker is perfect for use in warehouses, production halls, and distribution centers. Key Benefits of the 1,500 kg Electric Pallet Stacker This model’s technical parameters include a lifting capability of an impressive 3,500 mm, allowing for effective handling of goods at various heights. With a lifting capacity of 1,500 kg, it is ideal for managing medium to heavy loads. Machine Features - Sturdy high-grade steel frame ensures greater rigidity and stability during lifting. - Special handle system transmits steering input directly to the wheel for precise maneuvering. - Integrated battery charger. Lhedpjrh E D Uofx Af Ijb - Lifting forks to maximum height without load takes just 25 seconds! - Maintenance-free brushless motor technology. - Battery charge indicator integrated in the control box. - Emergency stop switch. - Integrated controller protects the battery from over-discharge or damage. - Sealed, maintenance-free AGM battery. - No periodic maintenance required during the warranty period. Technical Specifications MAX LIFTING HEIGHT: 3,500 mm CAPACITY: 1,500 kg LOAD CENTER: 600 mm FORK LENGTH: 1,150 mm OUTSIDE FORK WIDTH: 570 mm HEIGHT WITH LOWERED FORKS: 2,330 mm HEIGHT WITH EXTENDED MAST: 4,000 mm MINIMUM FORK HEIGHT: 85 mm OVERALL WIDTH: 810 mm OVERALL LENGTH: 1,745 mm GROUND CLEARANCE: 30 mm TURNING RADIUS: 1,390 mm TRAVEL SPEED (LOADED/UNLOADED): 3.5/4 km/h LIFTING SPEED (LOADED/UNLOADED): 140/200 mm/s LOWERING SPEED (LOADED/UNLOADED): 120/100 mm/s GRADABILITY (LOADED/UNLOADED): 5/7% SERVICE BRAKE TYPE: Electromagnetic DRIVE MOTOR POWER: 0.75 kW LIFT MOTOR POWER: 2 kW BATTERY VOLTAGE / CAPACITY: 12V 75 and 120 Ah WHEEL MATERIAL: Polyurethane WEIGHT: 586 kg

Sąlyga: naujas, Gamybos metai: 2025, Industrial metal lathe CORMAK TORNADO 460x1000 – featuring a cast bed twice as massive and a robust cast-iron frame, is equipped with a 12-speed gearbox powered by a powerful 5.5 kW/400V induction motor – delivering maximum torque and a large spindle bore of 82 mm. Recommended for machining hard steels and heavy-duty turning operations. Main Features: - Versatile applications: This lathe is ideal for a wide range of tasks including internal and external surface turning, taper turning, metric/inch/module/DP threading, polishing, drilling, and broaching. - Rigid construction: The 300 mm wide cast-iron bed is hardened and precision-ground, providing maximum vibration reduction and stable performance even during heavy machining. - Digital precision: The machine is equipped with a two-axis digital readout (longitudinal and cross), displaying precise displacement values on the screen via optical rulers. - High-quality spindle: Reinforced spindle bearing system and large 82 mm through bore ensure optimal performance. Included are both a 250 mm diameter 3-jaw chuck and a 320 mm diameter 4-jaw chuck, along with a 5.5 kW motor. - Efficiency and productivity: Rapid longitudinal and cross feeds via joystick significantly reduce machining times, while the hardened and ground gears in the headstock offer long-lasting durability and reliability. - Extensive threading capability: With threading functions for metric, inch, module, and DP threads (left and right), and the ability to change parameters without gear swaps, the lathe makes operations faster and more convenient. Supported thread ranges include metric (41) 0.1–14 mm, inch (60) 2–112 T.P.I., module (34) 0.1–7 M.P., and DP (50) 4–112 D.P. - Precise thread counting: Equipped with a thread chasing dial, allowing quick realignment of the carriage to the initial position after disengaging the leadscrew nut. Technical Specifications: Swing over bed: ø460 mm Swing over cross slide: ø274 mm Swing in gap (diameter x width): 690 mm x 240 mm Centre height: 230 mm Distance between centres: 1000 mm Bed width: 300 mm Max tool cross-section: 25 x 25 mm Cross slide travel: 290 mm Compound slide travel: 120 mm Spindle bore: ø82 mm Spindle nose: D1-8 Spindle taper (in spindle): ø90 (1:20) Number of spindle speeds: 12 Spindle speed range: 25–2000 rpm Leadscrew diameter/pitch: ø35 mm x 6 mm Inch threads: 2–112 TPI (60) Metric threads: 0.1–14 mm (41) Diametral pitch: 4–112 D.P. (50) Modular pitch: 0.1–7 M.P. (34) Longitudinal feed: 0.031–1.7 mm/rev (42) Lhjdpfsvzzffsx Af Isb Cross feed: 0.014–0.784 mm (42) Quill travel (tailstock): 120 mm Quill diameter (tailstock): ø60 mm Taper (tailstock): MT No. 4 Spindle drive motor: 5.5 kW Coolant pump motor: 0.09 kW Machine dimensions (L x W x H): 2170 x 1040 x 1340 mm Weight: 2105 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 10 035 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 5 940 mm, laisvas kėlimas: 1 940 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 970 mm, šakių laikiklio plotis: 1 540 mm, šakių ilgis: 1 600 mm, tuščias svoris: 11 950 kg, bendras ilgis: 4 950 mm, pavaros tipas: Elektro, statybos plotis: 2 400 mm, Electric Side Loader Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 355/65-15 Rear Tyre Type: Pneumatic Rear Tyre Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 750Ah Battery Year: 2018 Lhodpfxjyb Ukrj Af Isb Description: Alongside this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders available in our Hamburg and Gdańsk warehouses. Visit our homepage - sago-online. Leasing and financing on favourable terms are always possible. We are also happy to purchase your used equipment outright, even if you don't buy from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this EGX60/16/60TR. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons. We are also happy to display your vehicle for consignment sale in our facility. Fork Positioner Fork Positioner Opening Range: 510 / 1530 mm Heater, Fully Enclosed Cabin, Full Free Lift Platform Height: 1000 mm

Sąlyga: naudotas, Gamybos metai: 2003, Techniniai duomenys: Apvalus plienas: 45 mm Kvadratinis plienas: 45 mm Kampinis plienas: 130x130x13 90 mm Plokščias plienas: 450x15 mm Lodsybbz Rjpfx Af Ijhb Skylių štampavimas: 80 t Išsikišimas: 300 mm Eiga: 70 mm Darbinis aukštis: 1195 mm Bendras galios poreikis: 11 kW Apytiksliai matmenys: 2000x1800x2100 mm Apytikslis svoris: 2700 kg 1 naudotas profilio plieno žirklės + skylių štampavimo staklės DURMA IW 80 Yra: - Plokščio plieno stotis – švariems ir tvarkingiems pjūviams, su minimaliu deformavimu - Kampinio plieno stotis – švariems ir be deformacijos pjūviams kampinio plieno pjovimo metu esant 45° kampui - Strypinio plieno stotis – laikyklis apvaliam ir kvadratiniam plienui - Iškirtimo stotis – vienkrypčiams ir kampiniams iškirtimo darbams - Skylių štampavimo stotis – skardos, plokščio ir U formos plieno štampavimui

Sąlyga: naudotas, Gamybos metai: 2009, Techninės detalės: Lakšto plotis: 3000 mm Lakšto storis: 6 mm Eiga: 102 mm Lhodpfx Asybbz Djf Isb Galinio atmušimo sritis: 1000 mm Bendras galios poreikis: 11 kW Užimama vieta apie: 3900x1950x1700 mm Mašinos svoris apie: 5650 kg 1 naudota hidraulinė lakštinio metalo žirklė DURMA ES 3006 su ERD 100M skaitmeniniu ekranu Įskaičiuota: - Galinis atmušėjas - Kojinis jungiklis - 3 atraminės svirtys - Galinė šoninė apsauga

Sąlyga: naujas, Lenkimo ilgis: 3100 mm Lakšto storis: 4 mm Viršutinio volo skersmuo: 170 mm Standartinės savybės: - Atbulinis volas su varikliu - Kūginio lenkimo įtaisas - Grūdinti ir poliruoti volai - Korpusas iš ST 52 plieno Lhsdpfxsd Ab Nms Af Isb - Viršutinį volą po lenkimo galima atidaryti į šoną, kad būtų lengva išimti medžiagą - Asimetrinis dizainas tobulam lenkimui - Tobuliems rezultatams užtikrinti viršutinį ir apatinį volus varo stabdžių elektros variklis bei planetinė pavarų dėžė - Atitinka CE normas - Nešiojamas valdymo pultas, leidžiantis valdyti mašiną iš bet kurios vietos PAPILDOMAI Vien. Kiekis Grynasis kaina (¤)Apatiniai volai su varikliu11.205 ¤Skaitmeninis indikatorius atbuliniam volui1815 ¤Prailginti volai1788 ¤

Sąlyga: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis Ljdpfxed Eqqqs Af Iohb • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras plotis: 750 mm, bendras ilgis: 1 300 mm, ašių atstumas: 1 300 mm, Viršutinio tvirtinimo magnetas. Savivalantis. Tinka konvejerio juostoms, kurių darbinis plotis 1000 mm. Su rėmu. Lhsdpfx Afex Npqde Ijb

Sąlyga: naujas, Gamybos metai: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer only for customers who have attended a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are available FROM STOCK. Hydraulic Guillotine Shear “SMO-3204-N QC12Y 4x3200” Technical Specifications - Maximum cutting thickness (mild steel S235): 4 mm - Maximum sheet length: 3,200 mm - Shearing angle: 1.5° - Strokes per minute: 8 - 12 - Backgauge travel: 600 mm - Motor power: 5.5 kW - Length: 3,950 mm - Width: 1,670 mm - Height: 1,800 mm - Weight: 4,200 kg Equipment - Electrically powered backgauge (ball screw drive) - Hydraulic sheet holddowns over full cutting length - Blade gap adjustment - Ball transfers on the table for easy sheet handling Lhsdpfxevvuite Af Ijb - Work area lighting - Front support arms - Mobile foot switch Rear Slide The rear slide is equipped with ball guides to prevent cut parts from remaining on the machine. E21S Control Unit (Mounted on a movable arm on the left side of the device) - Backgauge control - Storage for 40 programs – up to 25 steps per program - Retraction function - Parameter save at the press of a button - Parameter retention in case of power failure High-Quality Components - German branded Rexroth hydraulic valve - Main motor under Siemens license - Electrical system components by Schneider Hydraulic Steel Connections The hydraulic piping is made of steel tubing rather than rubber hoses, reducing the risk of future leaks. Ergonomics Thanks to the mobile controller and the control unit on the swing arm, the operator has full freedom of movement throughout the work area. Additional LED lighting and a laser pointer ensure optimal visibility of the workpiece in every situation. Safety We place special emphasis on the safety of our customers and their employees – that’s why our press brakes feature high-visibility markings, covers, a rear safety gate, and easily accessible emergency stop switches. The machine is delivered with a thoroughly prepared operating manual in German. The device is supplied with a CE declaration of conformity. OCS – Oil Cooling System The Oil Cooling System guarantees stable machine performance, even under prolonged continuous operation. PCS – Pressure Control System The Pressure Control System ensures reliable long-term blade performance. Specialist Assistance We are committed to maintaining ongoing contact with our customers. Therefore, each machine purchase includes a package of hours for consulting with an Otinus specialist. As part of this service, our technician can: - Define bending sequences for complex parts - Advise on material and tool selection - Assist with the selection of operating parameters for different materials The remaining available consulting hours can be tracked in the Otinus customer portal.

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-2004-N QC12Y 4x2000 Technical Specifications - Maximum Sheet Thickness (S235): up to 4.0 mm - Maximum Cutting Length: 2000 mm - Cutting Angle: 0.5 - 1.5° - Strokes per Minute: 6 - 20 - Maximum Backgauge Distance: 600 mm - Motor Power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Weight: 2500.0 kg Features - Rear backgauge with electric motor (ball screw driven) - Hydraulic sheet clamping along the entire cutting length - Blade gap adjustment - Worktable equipped with transport balls - Work area lighting - Front supports - Mobile foot pedal controller E21S Controller (Mounted on a movable arm on the left side of the machine) - Backgauge control - Ability to save 40 programs – up to 25 different steps per program - Retract function - Parameter storage at the touch of a button - Parameter memory retention during power failure Steel Hydraulic Connections Hydraulic connections made from steel pipes instead of rubber hoses reduce the risk of future leaks. OCS - Oil Cooling System The oil cooling system guarantees stable machine parameters even during extended continuous operation. PCS - Pressure Control System The pressure control system ensures reliable blade operation for many years. Expert Support We ensure constant contact with our customers. That is why each purchased machine comes with several hours of Otinus Specialist Support. Technical Consultation Lodpeiggf Ijfx Af Ishb Our technicians assist you in selecting the right machine and accessories based on the appropriate technical drawings of the parts to be produced. Come and test our machine Take part in a unique demonstration, where a qualified Otinus technician will present the full capabilities of the machine. You can provide technical drawings and sample material. Scope of delivery includes: One-day operator training and commissioning - 1st day (up to 8 hours) – commissioning and controller training. Telephone specialist consultation - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Free rental of transport rollers and two jacks for easier positioning of the machine at the customer’s site. Rollers and jacks are supplied upon prior request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty. - Delivery time: approx. 10 - 12 weeks. Not applicable if the machine is marked as available from stock. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer is responsible for the machine during unloading and transport on their premises.

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-3208-N QC12Y 8x3200 Technical Specifications - Maximum sheet thickness (S235): up to 8.0 mm - Maximum length: 3200 mm - Cutting angle: 1.5° - Strokes per minute: 10 - 15 - Maximum backgauge distance: 600 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm - Height: 2100 mm - Weight: 6400.0 kg Equipment - Rear backgauge driven by electric motor (with ball screw drive) - Hydraulic sheet clamping across the full cutting length - Blade gap adjustment Lodpfxsh Rah Uo Af Iehb - Transport balls on the worktable - Work area lighting - Front supports - Mobile foot pedal E21S Control System (Mounted on a movable arm on the left side of the machine) - Backgauge control - Capability to store 40 programs – up to 25 different steps per program - Retract function - Store parameters at the press of a button - Parameter memory in the event of power failure Hydraulic Steel Connections Hydraulic connections made of steel pipes instead of rubber hoses reduce the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures machine parameter stability even during prolonged continuous operation. PCS - Pressure Control System The pressure control system guarantees reliable blade operation for many years. Professional Support We ensure constant contact with our customers. Therefore, we offer extensive hours of Otinus Specialist Support with every machine purchased. Technical Consultation Our technicians assist you in selecting the appropriate machine and accessories, based on the relevant technical drawings of the parts to be manufactured. Come and Test Our Machine Attend an exceptional demonstration where a qualified Otinus technician will present the full functionality of the machine. You may provide technical drawings and sample material. Included in the scope of supply: 1-day operator training and commissioning - 1st day (up to 8 hours): commissioning and control system training. Phone consultation with a specialist - from 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour package to be used within 12 months. Free rental of transport rollers and two jacks to facilitate machine positioning at the customer’s premises. Rollers and jacks are supplied upon prior request (at least 7 days before delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 10 - 12 weeks. Not applicable if the machine is marked as in-stock. - The machine is brand new. - Seller's warranty and post-warranty service. - The customer is responsible for the machine during unloading and transport on their premises.

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-2506-N QC12Y 6x2500 Technical Specifications - Maximum sheet thickness (S235): up to 6.0 mm - Maximum cutting length: 2,500 mm - Cutting angle: 0.5 - 2.5° - Number of strokes per minute: 18 - Maximum backgauge distance: 600 mm - Motor power: 7.5 kW - Length: 3,200 mm - Width: 1,700 mm - Height: 1,850 mm - Weight: 3,800 kg Features - Rear backgauge with electric motor (on ball screw drive) - Hydraulic sheet clamping across the full cutting length - Blade gap adjustment - Transfer balls on the work table - Work area lighting - Front supports - Mobile foot pedal E21S Controller (Mounted on a movable arm on the left side of the machine) - Backgauge control - Capacity to store 40 programs – up to 25 different steps per program - Retract/retraction function - Save parameters at the touch of a button - Parameter memory protection in the event of power failure Steel Hydraulic Connections Hydraulic connections made of steel pipes instead of rubber hoses reduce the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures the stability of machine parameters even during prolonged operation. PCS - Pressure Control System Pressure control system guarantees reliable blade operation for many years. Professional Support We ensure ongoing communication with our clients and offer extensive Otinus specialist support with every machine purchased. Technical Consultation Our technicians assist you in selecting the right machine and suitable accessories, based on your technical drawings for the parts to be manufactured. Come and Test Our Machine Take part in a dedicated demonstration where a qualified Otinus technician will demonstrate the machine’s complete functionality. You may provide technical drawings and sample materials for testing. Scope of Delivery: Operator Training and Commissioning – 1 day - Day 1 (up to 8 hours): Commissioning and training in machine control system. Lhsdpfx Afogih Upo Ijb Telephone support by a specialist - 7.30 am to 9.00 pm (Mon-Sat) – one 8-hour package valid for use within 12 months. Free loan of transport rollers and two jacks to facilitate setup of the machine at your premises. Rollers and jacks are delivered upon request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty. - Delivery time: approx. 10 - 12 weeks. This does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and handling on their premises

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-3206-N QC12Y 6x3200 Technical Specifications Lsdpfxegih Uts Af Iohb - Maximum Sheet Thickness (S235): up to 6.0 mm - Maximum Cutting Length: 3200 mm - Cutting Angle: 1.5° - Strokes per Minute: 14 - Maximum Backgauge Distance: 600 mm - Motor Power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment Features - Rear backgauge with electric motor (ball screw drive) - Hydraulic sheet clamping along the entire cutting length - Blade gap adjustment - Ball transfer tables on the working surface - Work area lighting - Front support arms - Mobile foot pedal E21S Control Unit (Mounted on an articulated arm on the left side of the machine) - Backgauge control - Ability to save 40 programs – up to 25 different steps per program - Retraction function - Parameter storage at the push of a button - Parameter memory in the event of power failure Hydraulic Connections Made of Steel Hydraulic connections are constructed from steel pipes instead of rubber hoses, reducing the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures the stability of machine parameters even during prolonged continuous operation. PCS - Pressure Control System The pressure control system guarantees reliable blade operation for many years. Professional Support We ensure ongoing contact with our clients and offer hours of Otinus Specialist Support with every machine purchased. Technical Consultation Our technicians assist you with the selection of the right machine and suitable accessories, based on provided technical drawings of the parts to be produced. Come and Test Our Machine Take part in a live demonstration where a qualified Otinus technician will present the full functionality of the machine. You may provide technical drawings and sample materials. Included with the Machine: 1-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and control system training Telephone support with a specialist - 7:30 am to 9:00 pm (Mon-Sat) – an 8-hour support package to be used within 12 months Free loan of transport rollers and two jacks to assist with machine installation at the customer's site. Rollers and jacks are provided by prior request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty - Delivery time: approx. 10 - 12 weeks (unless designated as available from stock) - The machine is brand new - Seller’s warranty and post-warranty service - The customer is responsible for the machine during unloading and on-site transport

Sąlyga: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call now to learn more! The offer refers to the standard version of the machine. All optional equipment and their prices can be found on our website. Electric Press Brake PBE-1204-CNC STEP ROCK22+ Technical Specifications - Maximum bending capacity for sheet metal (S235): up to 3.0 mm - Rated force: 400 kN - Maximum sheet length: 1250 mm - Throat depth (distance between tool and rear wall): 300 mm - Maximum stroke of the bending beam: 210 mm - Maximum opening height: 410 mm - Distance between uprights: 2600 mm - Maximum backgauge travel: 750 mm - Motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tooling - Automatic servo-controlled stops on linear guides: 2 pcs. - Front support arms: 2 pcs. - Backgauge travel (X-axis) adjustment: Electric motor - Beam adjustment (Y-axis): Electric motor - Punch mounting type: AMADA-style quick-change system Expert Support We ensure continuous communication with our customers. For this reason, we offer a package of hours for professional support from Otinus technicians with every machine purchase. Come and test our machines Take part in an exclusive demonstration with a qualified Otinus technician showcasing the full functionality of the machine. You are welcome to provide technical drawings and sample material. Scope of delivery includes: Two-day operator training and commissioning: - Day 1 (up to 8 hours) – commissioning and control system training - Day 2 (up to 8 hours) – independent work on the machine under supervisor’s guidance, including the programming of specific parts Telephone consultation by a specialist: - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months Free rental of transport rollers and two jacks for easier positioning of the machine at your site. Rollers and jacks are provided upon prior notice (at least 7 days before the scheduled delivery date). Lhsdpfx Afsrp Dp Te Ijb Terms of Cooperation - 24-month warranty period - Delivery time: approx. 6–8 weeks This does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on their premises.

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-4008-N QC12Y 8x4000 Technical Specifications - Maximum sheet thickness (S235): up to 8.0 mm - Maximum length: 4000 mm - Cutting angle: 1.5° - Number of strokes per minute: 8 - Maximum backgauge distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Weight: 7,300 kg Equipment - Rear backgauge with electric motor (on ball screw drives) - Hydraulic sheet clamping along the entire cutting length - Blade gap adjustment - Ball transfers on the worktable - Work area lighting - Front supports - Mobile foot controller E21S Control System (Mounted on a movable arm on the left side of the machine) - Backgauge control - Ability to store up to 40 programs – up to 25 different steps per program - Retraction function - Parameter saving at the push of a button - Parameter memory in case of power failure Hydraulic Connections Made of Steel Hydraulic connections from steel pipes instead of rubber hoses reduce the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures the stability of machine parameters even after long periods of continuous operation. PCS - Pressure Control System The pressure control system ensures reliable blade operation for many years. Professional Support We make it a priority to stay in constant contact with our customers. Therefore, we offer dedicated Otinus Specialist support for every purchased machine. Lhodoiuzupopfx Af Ieb Technical Consultation Our technicians assist in selecting the right machine and suitable accessories based on the relevant technical drawings for the parts to be manufactured. Come and Test Our Machine Take part in an exclusive demonstration where a qualified Otinus technician showcases the full functionality of the machine. You may provide technical drawings and sample material. Included with Delivery: 1-day operator training and commissioning - Day 1 (up to 8 hours): commissioning and control system training Telephone consultation by a specialist - From 7:30 AM to 9:00 PM (Mon-Sat) – an 8-hour package to be used within 12 months Free loan of transport rollers and two jacks to facilitate the installation of the machine at the customer's site. Rollers and jacks are provided upon request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty - Delivery time: approx. 10-12 weeks (unless the machine is marked as available from stock) - Machine is brand new - Seller provides both warranty and post-warranty service - The customer is responsible for the machine during unloading and transportation on their site

Sąlyga: naujas, Gamybos metai: 2024, Hydraulic Guillotine Shear SMO-3210-N QC12Y 10x3200 Technical Specifications - Maximum sheet thickness (S235): up to 10.0 mm - Maximum cutting length: 3200 mm - Cutting angle: 1.5° - Number of strokes per minute: 10 - 12 - Maximum backgauge distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Weight: 8,400.0 kg Equipment - Rear backgauge with electric motor (on ballscrew drive) - Hydraulic sheet clamping along the entire cutting length - Blade clearance adjustment - Ball rollers on the work table - Work area lighting - Front support arms - Mobile foot switch E21S Control System (Mounted on a movable arm on the left side of the machine) - Backgauge control - Capability to store 40 programs – up to 25 different steps per program - Retraction function - One-touch parameter saving - Parameter memory in case of power failure Hydraulic Connections Made of Steel Hydraulic connections are made from steel pipes instead of rubber hoses, reducing the risk of future leaks. OCS - Oil Cooling System The oil cooling system ensures machine parameters remain stable even after prolonged continuous operation. PCS - Pressure Control System The pressure control system ensures reliable blade operation for many years. Ledpeiukw Tsfx Af Ijhb Professional Support We ensure constant contact with our customers. That’s why we offer extensive Otinus Specialist Support with every machine purchased. Technical Consultation Our technicians will help you select the right machine and appropriate accessories – based on the relevant technical drawings of the parts to be manufactured. Visit and Test Our Machine Take part in an exclusive demonstration led by a qualified Otinus technician to showcase the full range of machine functions. You are welcome to bring technical drawings and sample materials. Included with the machine: 1-day operator training and commissioning - Day 1 (up to 8 hours) – Start-up and training on the control system. Telephone support from a specialist - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months. Free loan of transport rollers and two jacks to facilitate placement of the machine at your site. Rollers and jacks will be delivered upon prior request (at least 7 days before delivery). Terms of Collaboration - 24-month warranty period. - Delivery time: approx. 10 - 12 weeks. This does not apply if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service from the seller - The customer is responsible for the machine during unloading and on-site transportation

Sąlyga: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – Mild steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Extraction connection diameter: 120 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ON TOP Machine features a stress-free welded steel frame for a stable, robust structure. Motorized height adjustment of the work table via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Lhedswiqukopfx Af Iob Touch screen for: * Automatic star-delta switching of main motors * Analog ammeter for each group * Digital display for sheet thickness with decimal point precision * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Heavy-duty steel structure, wear-resistant surface. Vacuum conveyor belt available on request Variable feed speed via frequency inverter: 0.6 to 6.5 m/min Rubber conveyor belt, oil- and heat-resistant Automatic conveyor centering Side guides to prevent belt lifting. Rubber hold-down rollers before and after each station, oil- and heat-resistant Idler rollers on front and rear tables INCL. OPTIONAL TAMPICO BRUSH FOR CONVEYOR CLEANING 1st WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating Adjustable via eccentric shaft for working position and compensation for abrasive belt wear Pneumatic cylinders for automatic engagement and lift-off in case of emergency stop Both abrasive belts and/or Scotch Brite can be used Motorized adjustment and electronic height control of contact rollers Variable speed drive motor with automatic emergency brake Pneumatic abrasive belt tensioning system Abrasive belt centering system with electronic photo cell Oscillation adjustment for width and timing Positioning accuracy of contact roller adjustment mm: +/- 0.02 Positioning speed of contact roller adjustment m/s: 10 Contact roller diameter mm: 125 Rubber roller hardness Shore: 55 Contact roller adjustment stroke (grit change) up/down mm: 8 Abrasive belt speed m/s: 3 – 18 Motor power kW: 7.5 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise Transverse oscillation of the entire group Quick-change brush mounting system Brush diameter mm: 115 Number of brushes pcs.: 8 Oscillation stroke mm: 15 Rotational motor power kW: 2.2 Rotation speed rpm: 1,000 Oscillation motor power kW: 0.37 Brush linear speed m/s: 10.0 Optional equipment: B Group – External horizontal drum brush Ø 150 mm with Scotch Brite brush: €5,150.00 with wire brush 0.3 mm: €6,060.00 R GROUP – ABRASIVE BELT Motor 11 kW: €740.00 X GROUP – CUP BRUSHES Variable speed motor 5.5 kW 350/1100: included OPTIONS: Return to Sender system (workpiece is returned to operator at front): €1,770.00 Conveyor belt with vacuum system – 3.0 kW: €5,150.00

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 17 099 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 7 500 mm, laisvas kėlimas: 2 200 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 3 600 mm, šakių laikiklio plotis: 1 520 mm, šakių ilgis: 1 600 mm, tuščias svoris: 12 972 kg, bendras ilgis: 5 050 mm, pavaros tipas: Elektro, statybos plotis: 2 400 mm, Electric Sideload Stacker Load center: 800 mm Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 355/65-15 Rear tires type: Pneumatic Rear tires size: 355/65-15 Battery voltage: 120V Battery capacity: 930Ah Battery year: 2020 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Leasing and financing on favorable terms is always possible. We also gladly purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this EGX60/16/75TR. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom solutions for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment at our facility. Fork positioner, 1 x NIVO fork Heater, fully enclosed cabin, full free lift, Lhjdpfxjwyyifs Af Isb Platform height: 1050 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: A-IC1268, Gamybos metai: 2022, veikimo valandos: 6 883 h, keliamoji galia: 1 300 kg, kėlimo aukštis: 3 300 mm, statybinis aukštis: 2 160 mm, variklio tipas: Elektrinis, gamintojas: Jungheinrich Lhsdpfx Afjx Iatae Ijb

Sąlyga: naudotas, mašinos/transporto priemonės numeris: IC1282, Gamybos metai: 2022, veikimo valandos: 8 561 h, keliamoji galia: 1 300 kg, kėlimo aukštis: 3 300 mm, statybinis aukštis: 2 160 mm, variklio tipas: Elektrinis, gamintojas: Jungheinrich Lhjdpfox Dfrwex Af Ieb

Sąlyga: naudotas, mašinos/transporto priemonės numeris: IC1272, Gamybos metai: 2022, veikimo valandos: 7 752 h, keliamoji galia: 1 300 kg, kėlimo aukštis: 3 300 mm, statybinis aukštis: 2 160 mm, variklio tipas: Elektrinis, gamintojas: Jungheinrich Lodpfx Asx Dfrqsf Iehb

Sąlyga: naudotas, mašinos/transporto priemonės numeris: IC1223, Gamybos metai: 2016, veikimo valandos: 7 380 h, keliamoji galia: 1 500 kg, kėlimo aukštis: 3 100 mm, statybinis aukštis: 2 110 mm, variklio tipas: Elektrinis, gamintojas: Jungheinrich Ledsw Tkaaepfx Af Iohb

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, Paprasta išilginio ir skersinio pjovimo staklės, skirtos lakštams, kurių storis nuo 0,40 iki 0,80 mm ir plotis iki 1250 mm. Specifikacija: Lhedpfx Afex U Exhe Isb - Įrenginys su 6 poromis peilių, gali išpjauti iki 7 juostų, minimalus juostos plotis – 60 mm (rankinis reguliavimas). Pjovimo ilgio tolerancija ≤± 2,0 mm. Automatinė kiekio ir ilgio kontrolė. - Pjovimo peilių medžiaga: Cr12, tiksli mechaninė apdirbimas, termiškai apdorota. - Galia: 4 kW. Elektros standartas: 380 V/50 Hz/3 fazės - Valdymo įtampa: 24 V - Komplektacijoje: PLC (Siemens), liečiamas ekranas (Siemens), dažnio keitiklis (Schneider), enkoderis (Omron) ir kt. - Galimybė komplektuoti su mechaniniu arba automatiniu atraižų atraižų nuvyniotuvu

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 18 494 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 4 625 mm, laisvas kėlimas: 1 519 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 121 mm, pavaros tipas: Elektro, Elektrinis 4 ratų krautuvas ISO klasė: ISO 2 klasė = 1 000 - 2 500 kg Stiebo tipas: Triplxas Lhedpfx Aex S S Ttsf Isb Būklė: Paruoštas darbui ir visiškai veikiantis Techninė būklė: gera Baterijos įtampa: 48V Šoninis poslinkis, 3-iasis vožtuvas,