Bernardo Hbs 400 pirkti naudotą (196)

Sąlyga: naujas, Turning length 1500 mm Swing diameter 410 mm Swing diameter over cross slide 255 mm Swing diameter in gap 580 mm Spindle bore 52.0 mm Spindle speed 30 - 3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill travel 120 mm Ppodpfoxaaldjx Ah Hol Total power requirement 5.5 kW Machine weight approx. 1400 kg Dimensions (L x W x H) 2530 x 1000 x 1450 mm Features: - Equipped as standard with Delta frequency inverter - Delivers high torque in the low speed range - Nearly constant speed under load - Infinitely variable speed control - Set speed is displayed digitally - Prism bed made of grey cast iron, inductively hardened and precision-ground - Central, easy-to-use control for feeds and threading - Equipped with leadscrew and feedscrew - Modern main spindle bearing arrangement with precision angular contact ball bearings - Supplied with frequency inverter and 3-axis position indicator as standard - Hardened and ground gears and shafts, also in the feed gearbox - Simple construction for speed and feed adjustment - Smooth and precise switching - Adjustable tailstock for taper turning - Handwheel with adjustable fine graduation (0.02 mm) - Removable gap bridge allows machining of workpieces with large diameters Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Face plate 350 mm - Fixed steady rest - max. passage diameter 135 mm - Follow rest - max. passage diameter 65 mm - Foot pedal with brake function according to CE - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - Initial fill with Shell Tellus 46 - Coolant system - Slip clutch - Thread dial indicator - LED machine lamp - Change gears - Reducing sleeve - 2 center points - Chip guard/rear wall - Operating tools * Images show identical machine model.

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 320 mm Quill stroke: 160 mm Ppodjxaazrjpfx Ah Hjl Morse taper: 4 MT Table: 505 x 425 mm Tiltable: +/- 50 degrees T-slots: 14.0 mm Spindle speed: 90 - 1455 rpm Quill feed: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 120 mm Total power requirement: 1.0 / 1.5 kW Machine weight: approx. 380 kg Dimensions (L x W x H): 500 x 930 x 1870 mm Features - Variable drive for precise speed adjustment - Quill feed selectable either manually or via mechanical feed - Easy tool change with automatic tool ejector - Set spindle speed quickly and easily readable via digital display - Heavy-duty, swiveling cast iron table, with T-slots and coolant channel - Coolant system and lighting included - Adjustable drilling depth stop, drilling depth readable via scale - Forward/reverse operation for thread cutting Scope of delivery - Drill chuck arbor MK 4 / B 16 - Coolant system - Digital speed display - Quick-action drill chuck 1 - 16 mm / B 16 - Reducing sleeves MK 4 / 3, MK 4 / 2, MK 3 / 1 - LED machine lamp - Automatic tool ejector - Height-adjustable safety guard

Sąlyga: naujas, Lakšto plotis 1050 mm Lakšto storis 1,0 mm Atidarymo plotis 95,0 mm Pedpfx Ajxcuxwjh Hopl Reguliuojamas kampas nuo 0 iki 150 laipsnių Bendras galios poreikis – rankinis Mašinos svoris apie 180 kg Išmatavimai I x P x A: 1320 x 790 x 1050 mm Savybės: - Universalios lankstymo staklės tinkamos skardininkams ir remonto dirbtuvėms - Paprastas lenkimo svirties judėjimas per rankeną-lankelį - Lengvas viršutinės svirties reguliavimas efektyviam darbui - Aukšta viršutinė svirtis aukštų briaunų profilių gamybai - Dėl segmentinių įdėklų viršutinėje, apatinėje ir lenkimo svirtyje galimos įvairios lenkimo operacijos - Su šiais modeliais lengvai gaminamos dėžutės ir specialūs profiliai su priešpriešiniais lenkimais Pristatymo komplektacija: - Segmentuota viršutinė, apatinė ir lenkimo svirtis - Lenkimo segmentai: 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm

Sąlyga: naujas, maks. pjovimo galia paprastam plienui 6,0 mm ST 40 maks. pjovimo galia nerūdijančiam plienui 3,0 mm VA kampo nustatymas be pakopų nuo 30° iki 140° peilio ilgis 200 x 200 mm stalas: 900 x 990 mm darbinis aukštis 940 mm presavimo jėga 35,0 prie 6,0 mm ST 40 iškyša / presavimo mazgas 135 mm variklio galia 4,0 kW Ppedpjxcuybofx Ah Hel svoris 1020 kg matmenys I x P x A 900 x 990 x 1200 mm Savybės: - Iškirpimas be užkaitos, nepakeičiant pjovimo krašto formos - Pjovimo peiliai iš paviršiaus grūdinto įrankinio plieno - Valdymas pėdų pedalu – abi rankos lieka laisvos ruošiniui - Didelis darbo stalas su integruotom skalėm - T formos grioveliai tiksliam pasukamų ribotuvų vedimui - Apsauginis dangtis prieš pjovimo peilį dėl didesnio saugumo Tiekimo sudėtis: - hidraulinis iškirtimo įrenginys su reguliuojamu kampu ir perforavimo stotimi * Įrankių sistema BOSCHERT / TRUMPF - 1 komplektas pjovimo peilių - Apvalus štampas su 12 mm matrica - 2 pasukami medžiagos ribotuvai - Apsauginis dangtis iš plexiglass - Pėdų pedalas su avarinio stabdymo funkcija

Sąlyga: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 350 - 1,590 mm Max. workpiece height: 645 - 1,240 mm Ppsdpfoxaad Tox Ah Hel Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Thread cutting: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions (LxWxH): 2,450 x 980 x 2,840 mm Description - Large-dimensioned base plate - Ideal for machining large workpieces - Thick-walled, precision-ground column for improved sliding properties of the arm - Boom and drill head with independent hydraulic clamping - Easy height adjustment of the boom via lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears running in oil bath - Excellent sliding performance of the drill head on the boom due to ground surface Scope of delivery - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant device - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable protective cover

Sąlyga: naujas, Pressure: 20.0 t Stroke: 185 mm Table surface: 170 mm width Frame opening between guides: 510 mm Machine weight approx. 112 kg Space requirement approx. 1630 x 560 x 730 mm Equipment: - Standard with pressure cylinder movable to the left and right Pjdpfx Ahexaapcs Hopl - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston feed - Standard with V-block for shaft alignment - Standard with automatic piston return via integrated return spring - Height-adjustable press table with locking pin - Large-dimensioned manometer for reading the pressing force - Includes two-stage hydraulic pump - Robust construction thanks to welded steel frame

Sąlyga: naujas, Belt width: 75.0 mm Belt length: 2000 mm Belt speed: 14.5 + 29 m/sec Grinding width, flat table: 460 x 75 mm Extraction nozzle diameter: 100 mm Total power requirement: 3.0 kW, 100% duty cycle Machine weight: approx. 67.0 kg Dimensions (L x W x H): 1080 x 440 x 1000 mm Standard with 2 speeds, optimal for stainless steel grinding Features - Excellent grinding performance due to high belt speed Pjdpfx Ahjxaarqo Hopl - Quick adjustment for horizontal and angular position - Continuous flat grinding surface for optimal processing of long workpieces - Consistent belt tension via spring-loaded tensioning device - Versatile use for edge, surface, and cylindrical grinding - Includes quick-release system for rapid belt changes - Easy adjustment of parallel belt tracking via setscrew - Graphite coating on the flat grinding area improves belt glide Scope of delivery - K 80 grinding belt - Foldable safety screen - Grinding and support table - Workpiece stop - Dust extraction connector - Separate off-switch - Base frame

Sąlyga: naujas, Cutting capacity at 90 degrees: round 100 mm Cutting capacity at 45 degrees: round 65.0 mm Cutting capacity at 90 degrees: flat 100 x 150 mm Cutting capacity at 45 degrees: flat 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Saw blade speed: 45.0 m/min Weight: 26.0 kg Dimensions (LxWxH): 700 x 320 x 420 mm The mobile band saw EBS 100 C is the ideal machine for assembly work on construction sites. Its smooth and vibration-free operation ensures precise cuts. SOLVES MANY SAWING PROBLEMS ON SITE Dry cutting (no coolant required) Ppjdpfexaa Apex Ah Hjl - Excellent value for money due to versatile application capabilities - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideally suited for site use thanks to its low weight - Standard with integrated chip collection tray - Optimum cutting results thanks to ball bearing-mounted saw blade guide - Quick-release vice included in the delivery Scope of delivery: - Bandsaw blade - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection tray

Sąlyga: naujas, Pressure 50 t Stroke 200 mm Table area 730 x 205 mm Installation height 1050 mm Frame passage between guides 730 mm Machine weight approx. 288 kg. Description: - Standard-equipped with cable winch - For easy height adjustment of the support table - Ram feed can be operated manually or pneumatically - Powerful workshop presses for trade and repair shops - Optimal price-performance ratio due to efficient design - Standard foot pedal allows hands-free operation of the workpiece - Extended application range with optionally available 10-piece press punch set - Pressure cylinder with integrated return spring for piston retraction Ppsdpfx Aexaa Ixeh Hol - Welded steel frame for heavy-duty use and high stability - Versatile application through pressure cylinder, which can be moved left and right

Sąlyga: naujas, Turning length 2000 mm Swing diameter 560 mm Swing diameter above support 350 mm Spindle speed 25 - 1500 rpm Max. swinging diameter over cross slide 350 mm Turning diameter in gap 785 mm Quill travel 180 mm Quill taper: 5 MT Spindle bore 105 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Machine weight approx. 2720 kg Description: - Versatile applications in general engineering, production, single-part manufacturing, etc. - A removable gap bridge allows the machining of large-diameter workpieces - Speed and feed settings are straightforward, easy to operate, and precise to switch - Includes 4 adjustable cams for the automatic disengagement of the carriage - Equipped as standard with rapid traverse in longitudinal and facing direction to reduce non-productive times - The machine bed, cast in one piece, offers exceptional rigidity and minimal vibration, providing the ideal basis for precise turning operations - Modern headstock bearing with precision angular contact ball bearings - Tailstock with fine scaling can be set over for taper turning - Centralized lubrication for the carriage Equipment: - 3-axis DRO ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 Ppjdpsxabtpjfx Ah Hjl - Faceplate 450 mm - Fixed steady rest – max. passage diameter 180 mm - Follow rest – max. passage diameter 120 mm - 2 center points - Initial fill with Shell Tellus 46 - Motor with magnetic brake conforming to CE - Foot pedal with brake function (CE-compliant) - Coolant system - Quick-change tool post with 4 tool holders - Safety device for quick-change tool post - Overload clutch - LED machine lamp - Change gears - Reducing sleeve - Chip guard - Operators' tools

Sąlyga: naujas, Sheet width: 2065 mm Sheet thickness: 1.20 mm Opening width with tooling: 35.0 mm Psdoxabvwepfx Ah Hepl Opening width without tooling: 60.0 mm Max. bending angle: 0 - 135° Total power requirement: manual Machine weight: approx. 520 kg Space requirement: approx. 2400 x 1115 x 1150 mm - Segmented upper beam for a wide range of bending options - Universally applicable bending machine for roofing contractors and repair workshops - High upper beam for manufacturing profiles with large upstands - Fast and simple bending process via bow handle - Easy adjustment of the upper beam for efficient operation - Bending angle setting via scale - Individually removable segments for box bending - Robust construction in a modern design Equipment: - Segmented upper beam and bending beam - Foot clamping device - Fixed stop for angle adjustment - Rear gauge - Bending segments: 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Sąlyga: naujas, Turning length 1000 mm Swing diameter 380 mm Swing diameter over gap 490 mm Spindle bore 51.0 mm Spindle speed 70 - 2000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper MK 4 Quill travel 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions (L x W x H) 1920 x 800 x 1660 mm Description: The lead and feed screw lathe Master 380 impresses with its robust construction and user-friendly operation. Even the standard configuration includes all essential accessories (3-axis digital readout, steadies, LED machine lamp, safety features according to CE, ...) Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, per DIN 55029 - Fixed steady rest - max. passage diameter 70 mm - Travelling steady rest - max. passage diameter 50 mm - Coolant system Psdpfxoxabv Rs Ah Hjpl - Initial fill with Shell Tellus 46 - Extendable chip tray - Mounting plate 320 mm - Four-way toolpost - Safety guard for four-way toolpost - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 live centers - Foot pedal with brake function, CE compliant - Motor with magnetic brake, CE compliant - Machine base with drawers - Operating tools

Sąlyga: naujas, Pressure: 5.0 t Reach: 215 mm Max. workpiece height: 445 mm Mandrel diameter: 50 x 50 x 645 mm Table plate: Ø 275 mm Total power requirement: manual Machine weight approx. 160 kg Space requirement approx. 370 x 550 x 810 mm Ppjdpfx Ahsxabxfs Hjl Description: - For pressing in and out of bearings, bushings, etc. - The main body of model DP 5 is made of high-quality cast iron - Includes mounting holes, ideal for bench installation - Suitable for bushing removal, straightening, bending, broaching, etc. - Lever arm can be variably adjusted according to the required force - Ideally suited for repair shops and general workshop use

Sąlyga: naujas, max. cutting capacity mild steel 6.5 mm ST 40 max. cutting capacity stainless steel 3.5 mm VA Angle adjustment stepless from - to 90° Blade length 250 x 250 mm Table: 810 x 750 mm Working height 950 mm Motor power 4.0 kW Weight 630 kg Dimensions (L x W x H): 810 x 750 x 1150 mm Features: - Notching with burr-free cuts, no deformation of cutting edges - Cutting blades made of surface-hardened tool steel - Operated via foot pedal, leaving both hands free to handle the workpiece - Large dimensioned worktable with integrated scales Pjdpfx Ajxcux Deh Hspl - T-slots for precise guidance of swiveling stops - Safety cover in front of the cutting blade for high safety Scope of delivery: - 1 set of cutting blades - 2 swiveling material stops - Plexiglas safety cover - Foot pedal with emergency stop

Sąlyga: naujas, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius 190 mm Round steel 18.0 mm Machine weight approx. 33.0 kg Features: - For precise cold and hot bending of flat, round, and square steels - Robust construction for bolting to the workbench - Continuously adjustable bending stop with locating pin - With eccentric quick-release clamp for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and metalworking workshops Bending capacity cold / hot Flat steel 100 x 5 mm / 100 x 15 mm 65 x 10 mm / 75 x 20 mm Round steel 18 mm / 27 mm Square steel 16 x 16 mm / 25 x 25 mm Ppedpexcux Refx Ah Hsl Angle steel 60 x 8 mm / 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bars - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Sąlyga: naujas, Drilling capacity in steel (diameter): 32.0 mm Throat depth: 230 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 400x320 mm Spindle speed: 105 - 1725 rpm Total power requirement: 1.2 kW Weight: 245 kg Dimensions (L x W x H): 470x810x1710 mm Psdpfx Ajw U U N Ish Hspl Features: - Compact, robust grey cast iron construction with a modern design - Infinitely variable speed control - Set speed is displayed digitally - Table height adjustment via rack and pinion with hand crank - Reversible spindle rotation for tapping operations - Powerful 2-speed motor, speed range from 105 to 1725 rpm - Base plate with T-slots for clamping tall workpieces - Safety switch with undervoltage release - Spindle runs in precision ball bearings Scope of delivery: - 1 – 13 mm / B16 keyed drill chuck - Drill chuck arbor MT 3 / B16 - Reducing sleeve MT 3 / 2 - Digital speed display - LED machine lamp - Height-adjustable safety guard

Sąlyga: naujas, Drilling capacity in steel (diameter): 35.0 mm Drilling capacity in cast iron: 40.0 mm Thread cutting M24 in steel Throat depth: 320 mm Ppodpfx Aexaabrsh Hsl Morse taper: 4 MT Quill travel: 160 mm Spindle speed: 65 - 3250 rpm Table: 500 x 420 mm Throat depth: 320 mm Weight: 375 kg Dimensions L-W-H: 600 x 870 x 2,170 mm Features: - Infinitely variable spindle speed, ideal for setting the desired cutting speed - Automatic tool ejector and standard thread cutting device - Electromechanical feed, adjustable from 0.1 - 0.3 mm/rev - Solid cast iron table with rotatable and tiltable support surface - T-slots in the machine base allow for clamping of tall workpieces - Guaranteed run-out accuracy ≤ 0.02 mm, measured at the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Keyed drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT4 / B16 - Reducing sleeve MT4 / 3, MT4 / 2 - Coolant system - Thread cutting device - Electromagnetic quill feed - Automatic tool ejector - LED machine lamp - Initial filling with Shell Tellus 46 - Digital speed display - Height-adjustable safety guard

Sąlyga: naujas, x-travel 1000 mm y-travel 360 mm z-travel 400 mm Spindle mount ISO 40 Table: 1370 x 320 mm Feed: Horizontal 80 - 830 / Vertical 23-625 mm/min Spindle speed: Horizontal 35 - 1500 / Vertical 45 - 1660 rpm Distance spindle / table (H) 30 - 430 / (V) 210 - 610 mm Rapid traverse Z-axis 750 mm/min Overarm reach 305 - 805 mm T-slots 3 x 14.0 mm Psdpfx Aoxaagneh Hepl Table tiltable ° Max. workpiece weight 300 kg Coolant pump 25.0 L/min Total power requirement 7.6 kW Machine weight approx. 1540 kg Dimensions L-W-H 1840 x 1830 x 2050 mm The universal milling machine UWF 130 Servo is an advancement of the well-known UWF 130. With its "HURON" milling head, which can be set to any angular position, and an x-axis travel of 1000 mm, this machine is highly versatile. A distinctive feature of this model is the rapid traverse and the 8-step feeds in all axes, driven by a servo motor ("SERVO" version). - Large-sized box ways in y- and z-axis for increased stability - 8 automatic feeds and rapid traverse on all axes, servo motor-driven - Universal "Huron" milling head, adjustable to all angular positions - Swiveling control panel with ergonomically arranged switches - Heavy, grey cast iron machine base for vibration-free operation - High smoothness of operation thanks to ground, oil-bath lubricated gear wheels - Overarm with clearly arranged gearbox for spindle speed selection - Digital position display for x, y, and z-axis included - Precision ground cross table with T-slots Scope of delivery - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Power feed for x, y, and z-axis - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combination arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x, y, and z-axis - Operating tools

Sąlyga: naujas, Turning length 1500 mm Swing diameter 560 mm Swing diameter over support 350 mm Spindle speed 25 - 1600 rpm Swing diameter over bed slide 350 mm Swing diameter in gap 785 mm Podpfx Asxaam Ieh Hjpl Quill travel 180 mm Spindle bore 105.0 mm Motor power 7.5 kW Spindle mount DIN 55029 D 1-8 Quill: 5 MT Machine weight approx. 2,370 kg Dimensions L-W-H 2,840 x 1,150 x 1,460 mm Description: - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - A removable bridge enables machining of large-diameter workpieces - The speed and feed settings are straightforward, smooth-running, and precisely switchable - Includes four adjustable cams for automatic bed slide shutdown - Standard with rapid traverse longitudinal and crossfeed to reduce non-productive times - The machine bed is a single-piece casting, extremely torsion-resistant and low-vibration, providing essential conditions for accurate turning - Modern main spindle bearing with precision angular contact ball bearings - Tailstock with fine scale, adjustable for taper turning - Central lubrication system for the bed slide Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. diameter 180 mm - Follow rest – max. diameter 120 mm - 2 centers - Initial fill with Shell Tellus 46 - Motor with electromagnetic brake according to CE standard - Foot pedal with braking function according to CE - Coolant system - Quick-change toolpost with four inserts - Guard for quick-change toolpost - Overload clutch - LED machine light - Change gears - Reducing sleeve - Chip guard - Operating tools

Sąlyga: naujas, Sheet width 1020 mm Sheet thickness 2.5 mm Opening width 48 mm Max. bending angle 0 - 135° Total power requirement manual operation kW Machine weight approx. 285 kg Space requirement approx. 1.35 x 0.82 x 1.14 m Equipment: - Universally applicable bending machine for sheet metal workshops and repair shops - Robust construction with modern design - Easy adjustment of the upper beam via foot pedal - Hands remain free to handle the workpiece Psdpfexaaxkjx Ah Hopl - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending options - Excellent price-performance ratio - Fast and simple bending process using a bow handle - Non-slip rubber cover on foot pedal for safe operation - Easy adjustment of the bottom beam to match sheet thickness - High upper beam for producing high-flanged profiles Scope of delivery: - Segmented upper beam - Manual back gauge - Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Sąlyga: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat: 370 mm Drilling stroke: 250 mm Morse taper: 4 MT Table: 600 x 500 mm Thread cutting M 42 steel Spindle speed: 40 - 2100 rpm Feed: 0.1 - 0.4 mm/rev Ppsdpfxoxaay Ie Ah Hsl Column diameter: 200 mm Distance spindle / table max.: 600 mm Distance spindle / base plate max.: 1190 mm Total power requirement: 2.2 / 2.8 kW Weight: 670 kg Dimensions LxWxH: 1020 x 750 x 2340 mm The GB 50 HS geared pillar drilling machine impresses with its large drilling capacity of 50 mm, robust construction, and comprehensive standard equipment. This makes the model ideally suited for use in industrial production and series manufacturing. Features - Motorized table elevation to reduce non-productive times - Massive, vibration-free construction for precise work - Stable and precision-ground steel column designed for high loads - Digital display for speed and drilling depth - Solid cast iron table with rotatable and tiltable work surface - Enhanced cost efficiency due to comprehensive standard equipment - Hardened and ground gears ensure extremely smooth running - 4 x automatic spindle feeds, switchable via electromagnetic clutch - Standard thread cutting device and automatic tool ejector Scope of delivery - Gear chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Reducing sleeve MT 4 / 3, MT 4 / 2 - Motorized table elevation - Coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine lamp - Initial fill with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable safety guard

Sąlyga: naujas, Turning length: 1,000 mm Turning diameter: 360 mm Swing diameter over bed slide: 220 mm Turning diameter in gap: 502 mm Spindle bore: 52.0 mm Speed range: 70 – 2,000 rpm Bed width: 185 mm Spindle mount: 55029 D 1-5 Tailstock taper: MT 3 Quill travel: 100 mm Pedpfxsxaaz Ej Ah Hepl Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 575 kg Dimensions (L x W x H): 1825 x 750 x 1600 mm Features: - Solid prism bed with additional ribbing to minimize vibration - Standard with 52 mm spindle bore for machining large shaft diameters - Ideally suited for machining steel, non-ferrous metals, and plastics - Removable gap bridge for machining large-diameter workpieces - Space-saving installation with front pull-out chip tray - Simple, smooth, and precise speed and feed adjustment - Electromechanical foot brake to reduce non-productive time - Modern precision main spindle bearing with angular contact ball bearings - Prism bed made of cast iron, induction-hardened and precision-ground - Guaranteed spindle nose runout accuracy (≤ 0.009 mm) - Main spindle hardened and ground, running in oil bath - Adjustable tailstock, headstock, and guideways - Tailstock can be offset ±5 mm for taper turning Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. pass-through diameter 70 mm - Traveling steady rest – max. pass-through diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - Mounting plate 280 mm - Four-way tool post - Safety guard for four-way tool post - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine light - Reducing sleeve - Change gears - 2 centers - Foot pedal with braking function to CE standards - Motor with magnetic brake according to CE standards - Base with drawers - Operating tools

Sąlyga: naujas, x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm Spindle mounting: ISO 40 Table: 1120 x 260 mm Feed rate: 24 - 402 mm/min Spindle speed: 45 – 1660 rpm Distance spindle/table: 175 – 520 mm Rapid traverse Z-axis: 660 mm/min Projection: 0 – 550 mm Total power requirement: 2.2 kW Machine weight: approx. 1380 kg Dimensions (LxWxH): 1570 x 1470 x 1660 mm The universal milling machine UWF 110 is suitable for performing light to medium-duty milling operations. Thanks to its high versatility and straightforward retooling, it can be effectively used in workshops for machining small to medium batch sizes. Equipment: - Universal milling head, adjustable to all angular positions - Swivelling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - Dovetail guideways with adjustable gibs on all 3 axes - High running smoothness thanks to ground, oil-bath-lubricated gearwheels - Positioning motor for Z-axis included in delivery - Standard automatic table feed on x- and y-axis Pjdpfjxaa Hzex Ah Hjpl - Precisely surface-finished cross table with T-slots - Digital position display for x-, y- and z-axis included Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - LED machine lamp - Coolant system - Central lubrication - Counter bearing - Long milling arbor 32 mm - Feed for x- and y-axes - Positioning motor for z-axis - Coolant tray - Adjustable safety guard - Operating tools

Sąlyga: naujas, Turning length: 3000 mm Swing diameter: 800 mm Swing diameter in gap: 1000 mm Swing diameter over cross slide: 540 mm Spindle speed: 25 - 1600 rpm Tailstock quill: MT 5 Quill stroke: 235 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Machine weight: approx. 3820 kg Dimensions: 4800 x 1320 x 1580 mm Features - Versatile range of applications in general mechanical engineering, production, single-part manufacturing, etc. - Central, ergonomic feed and thread control with leadscrew and feed shaft - Prism bed made of grey cast iron, induction hardened and precision ground - Modern main spindle bearing with high-precision angular contact roller bearing - Hardened and ground gears and shafts, also in feed gearbox - Standard with rapid traverse longitudinal and transverse to reduce non-productive times - Large spindle bore (105 mm) for workpieces with large diameters - Smooth start-up via mechanical multi-disc clutch - Electromechanical foot brake for reduced non-productive times - Excellent cutting performance, including for facing operations - The bed is reinforced with strong ribs to stiffen the bed guideway and minimize vibration influences Scope of delivery - 3-axis digital readout ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 Ppodpjxabcdefx Ah Hsl - Face plate 500 mm - Fixed steady rest – max. pass-through diameter 180 mm - Travelling steady rest – max. pass-through diameter 100 mm - 2 dead centers - Motor with magnetic brake, compliant with CE - Foot pedal with brake function, CE compliant - First fill with Shell Tellus 46 - Rapid traverse longitudinal and transverse - Slip clutch - Coolant system - Quick-change tool post with 4 holders - Guard device for quick-change tool post - LED machine lamp - Change gears - Reducing sleeve - Chip guard rear wall - Operating tools

Sąlyga: naujas, Bandwidth: 150 mm Belt length: 2,000 mm Belt speed: 14.5 + 29 m/sec Podpfx Asxabf Eeh Hjpl Grinding surface: 460 x 150 mm platen Extraction nozzle diameter: 100 mm Total power requirement: 4.0 kW, 100% duty cycle Weight: 84.0 kg Dimensions (L x W x H): 1,080 x 520 x 1,000 mm Supplied as standard with 2 speeds, ideal for stainless steel grinding Equipment: - Universally applicable for edge, flat, and round grinding - Graphite pad on the flat grinding surface enhances the belt’s glide characteristics - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly, quick, and straightforward belt change - High grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Suitable for both craft and industrial applications - Large-surface platen with safety guard - Includes fine adjustment for parallel belt tracking Scope of delivery: - Abrasive belt K 80 - Folding safety shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized contact roller - Graphite pad - Base frame - Operating manual in German