Gręžimo staklės

Bernardo BF 45 HSV

Būklė: naudotas, Gamybos metai: 1989, Technical specifications: Drilling capacity in steel (diameter): 28 mm Throat depth: 285 mm Drilling stroke: 165 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MT 3 Spindle speed: 65 – 1,750 rpm / 4x infinitely variable Feed: 0.1; 0.2; 0.3 manual/automatic mm/rev Max. distance spindle/table: 80 – 680 mm Table clamping surface: 500 x 370 mm Table rotation: 360° Drill table adjustment: 600 mm vertical Column diameter: Ø 130 mm Fodpfou Idkzex Abrjgi Total power requirement: 7.5 kW Approx. machine weight: 273 kg Machine dimensions approx. LxWxH: 0.9 x 0.6 x 1.9 m The machine is suitable for thread cutting, with selectable left/right rotation via foot switch and/or depth stop. The table can be swiveled and adjusted in height.

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP Fsdpfxou Aq Amj Abregi - Drilling capacity up to: 18 mm - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm Fsdeu Et Nbopfx Abrjgi - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: naujas, Column drill, precise, quiet, and reliable. Fedpfoir Aihox Abrjgi Manufactured in accordance with strict safety standards. Precision spindle axis with hardened Morse taper, ground base plate. Equipped with electronic speed variator. Swivel work table + vice, 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle travel: 90 mm. Spindle sleeve diameter: 52 mm. Column diameter: 98 mm. Distance column to spindle center: 201 mm. PU belt drive Electronic variator (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V Single-phase. Overall dimensions (H x W x D): 1950 x 600 x 680 mm. Weight: 220 kg.

Būklė: naujas, Gamybos metai: 2026, Rotator for containers, welding positioner, welding turntable, roller stand 1000 kg load capacity Fodpfogu Edvjx Abregi Adjustable distance and rollers With foot remote control Continuously adjustable speed from 80 to 1600 mm/min. Suitable for diameters from 20 mm to 700 mm

Būklė: naujas, Gamybos metai: 2026, CORMAK ZX 40BPC is a robust metal drilling and milling machine. It features a spindle head that can rotate +/- 90 degrees, automatic spindle feed, right and left rotation, a large table, coolant system, optional automatic X-axis table feed, a powerful 2-speed 1.5 kW motor, and a drilling capacity up to 40 mm. Spindle speed up to 3200 rpm. CORMAK Product Features: Fgedpfxsvxhfmj Abrsi - Durability – All machines and tools are made from top-quality materials, ensuring longevity and reliable operation. - Precision – Advanced manufacturing technologies provide exceptional accuracy, essential for precision machining tasks. - Innovation – Technical solutions applied in CORMAK products enhance work efficiency and ease of operation. CORMAK is a dynamic brand earning satisfied customers worldwide in both woodworking and metalworking industries. - Adjustable working flexibility – thanks to a rotatable head and adjustable height. - Threading function and reversible spindle direction (right and left), increasing versatility. - Precise depth setting – with a three-arm lever and calibrated hand wheel for accurate depth control. - Automatic spindle feed for greater precision and convenience during drilling. - Advanced oil-lubricated gearbox – equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – solid base ensures secure setup and vibration-free operation. - High performance – thanks to a powerful motor, effective even for tough materials. - Durable column – with ground finish, ensuring rigidity and precise operation. - Safety guard – swing-away plexiglass chuck guard for extra operator protection. - Heavy-duty cast column – provides high machining accuracy and long service life. - Worktable with T-slots (14 mm) – facilitates quick and easy vise and accessory mounting. - Coolant system – standard equipment for safe and efficient extended operation. Technical Data Max. drilling capacity (steel/cast iron): 32/40 mm Face milling width: 80 mm End milling width: 22 mm Spindle travel: 125 mm Spindle taper: MT4 Number of speeds: 12 Spindle speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max. distance from spindle end to table: 735 mm Max. distance from spindle end to base: 1245 mm Distance from spindle to column surface: 272 mm Table dimensions: 730x210 mm Base dimensions: 690x520 mm Motor power S1/S6: 1.1/1.5 kW (1.5/2.0 HP S1), 1.7/2.2 kW (2.25/3.0 HP S6) Coolant pump motor: 40 W Machine dimensions (height with base): 1200x1000x910 mm Weight: 380 kg

Būklė: naujas, Gamybos metai: 2025, Sharpening Solutions for Chisels and Hand Tools Proven thousands of times in the trades. ✓ Burr-Free Grinding Without Honing the Edge! The specially developed grinding principle, using grinding pads, prevents the formation of burrs. Additional honing of the edge is unnecessary. Lateral grinding of the edges in the same clamping position is possible. ✓ Dry Grinding Without Overheating or Burning the Workpiece! Heat is dissipated from the workpiece via the grinding pads. ✓ Time and Cost Savings! Fsdpevrbubsfx Abregi Time is money. The efficient grinding principle sharpens the workpiece within just a few seconds. ✓ Easiest Operation! The system is simple, straightforward, and fast to operate. Tools can be effortlessly clamped and unclamped. Even apprentices or unskilled workers can handle this machine with ease and professional results. ✓ Low Maintenance Costs! The machine has virtually no wearing parts. Only the grinding pads and the grinding wheel are subject to wear. ✓ Swiss Quality! Premium components guarantee stability and longevity. Machines up to 50 years old are still in use today. ✓ Swiss Precision! The machine stands for a guaranteed high-quality sharpening result. SAVE TIME, MONEY, AND EFFORT Application example: Sharpening and honing plane irons and chisels: Conventional methods: 4.0 min. ISELI method: 0.5 min. ⇒ TIME SAVINGS: 3.5 min. An average business has at least 6 tools to sharpen per day. Previously, this took 24 minutes. With the ISELI sharpening system, it takes just 3 minutes. You save 21 minutes per day, or 4,620 minutes per year (at 220 working days)—equivalent to 77 hours. Assuming an hourly wage of EUR 35 (including operating costs), you save around EUR 2,700 per year.

Gamybos metai: 1978, būklė: labai geros būklės (naudotas), Macmon M 100 D tool milling machine with 3-axis Fagor digital readout, from a training department, featuring a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. The machine is in very good, operational condition and can be demonstrated under power by appointment. Fodpshtfubofx Abrsgi

Gamybos metai: 2007, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 073759001, Offer 22489 Technical Specifications: - Cutting capacity at 90° • Round: 320 mm • Flat: 320 x 320 mm - Automatic material feed - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic raising/lowering of the saw frame - Upper stroke limit of the saw frame Fgedpfx Aoim Ildobrei - Continuously adjustable cutting pressure - Hydraulic material vice - Swarf conveyor screw - Coolant system - Discharge roller conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Required space: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Būklė: naujas, Gamybos metai: 2025, Heavy, robust cast construction High running smoothness thanks to ground, oil-bath lubricated gearbox gears Right-/left-hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed on the X-axis Coolant system Machine lamp Gear head ± 60° swiveling Adjustable gibs Massive, hand-scraped dovetail column guide for maximum stability and precision Height-adjustable, large protective screen with microswitch Drilling depth stop Digital position display DRO 5 Drilling / tapping function Massive, large-dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs Fgsdpfx Absg U Uv Ujrei Heavy-duty cast machine base with chip tray Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 rpm via two infinitely variable speed settings Dimensions and weight Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/milling performance Max. facing head diameter: 63 mm Max. end mill diameter: 26 mm Drilling capacity steel (S235JR): 24 mm Continuous drilling capacity steel (S235JR): 20 mm Electrical data Connection voltage: 230 V Mains frequency: 50 Hz Electrical connection Total connected load: 1.5 kW Milling table horizontal Length: 800 mm Width: 240 mm Distance vertical spindle – milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Standards and certifications Standard: DIN EN 55011 EMC class: C2 Travel Manual X-axis: 560 mm Manual Y-axis: 195 mm Manual Z-axis: 350 mm Automatic X-axis: 480 mm Vertical spindle Overhang: 258 mm Spindle taper: MT 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M 16 Swivel range milling head Z-X plane: ± 45 ° Quill diameter: 75 mm Quill stroke: 120 mm Location: Ex stock 54634 Bitburg - immediately available -