Bernardo Hbs 400 pirkti naudotą (196)

Sąlyga: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Pedpsd Du T Ijfx Af Nsgg Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Sąlyga: naujas, Bernardo Bandsaw HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw blade dimensions: 3607 x 25 x 0.6 mm – 3 TPI Saw blade widths: 9.5 – 25.4 mm Cutting speeds: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output (S1 100%): 2.2 kW (3.0 HP) Motor rated input (S6 40%): 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight: approx. 162 kg Scope of delivery • Saw blade • Rip fence with magnifier Pgsdjd N S Urepfx Af Neg • Mitre gauge • Aluminium drive wheels • Ball-bearing saw blade guide • Motor with brake • Push stick • Operating tools

Sąlyga: naujas, Band Saw Bernardo HBS 400 N Cutting width: 410 mm Cutting height: 260 mm Saw blade dimensions: 3345 x 25 x 0.6 mm – 3 TPI Pgjdpfjd Tcaksx Af Nog Saw blade widths: 9.5 – 37 mm Cutting speed: 420 / 840 m/min Table dimensions: 450 x 560 mm Table height: 890 mm Table tilt: -5 to +45° Dust extraction port: Ø 2x 100 mm Motor output power (S1 100%): 2.2 kW (3.0 HP) Motor input power (S6 40%): 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 875 x 740 x 1740 mm Weight approx. 132 kg

Sąlyga: naujas, Drilling capacity in steel (diameter): 32.0 mm Throat depth: 255 mm Quill stroke: 120 mm Morse taper: 4 MT Table: 385 x 335 mm Speed range: 80 - 2130 rpm Total power requirement: 1.1 / 2.2 kW Weight: 125 kg Dimensions (L-W-H): 460 x 900 x 1730 mm Podsxaaqgepfx Af Nogg Features: - Surface-machined work table - Height adjustable via rack and pinion mechanism with hand crank - Ground base plate with T-slots for clamping tall workpieces - V-belt drive with balanced pulleys for smooth operation - Adjustable drilling depth stop for precise spindle feed - Powerful 2-speed motor, speed range from 80 - 2130 rpm - Forward/reverse switch for clockwise and counterclockwise rotation included - Crosshair laser device for convenient operation - Compact, stable cast iron construction in modern design - Sturdy, ground steel column designed for high loads Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless drill chuck 1 - 16 mm / B 18 - Cam switch for forward/reverse operation - Crosshair laser device - T-slot nuts - Height-adjustable protective cover

Sąlyga: naujas, Turning length 1000 mm Swing diameter 400 mm Swing diameter in the gap 560 mm Spindle bore 52.0 mm Speed range 45 - 2,000 rpm Bed width 210 mm Spindle mount 55029 D 1-5 Tailstock taper 4 MT Quill travel 100 mm Total power requirement 2.0 / 2.4 kW Machine weight approx. 810 kg Dimensions L-W-H 1,890 x 800 x 1,600 mm Description: - Ideally suited for machining steel, non-ferrous metals, and plastics - Electromechanical foot brake to reduce non-productive time Pjdpexaau Ssfx Af Negg - Hardened and ground gears, including in the feed gearbox - Very handy, robust machine with feed and lead screw - Prism bed made of cast iron, inductively hardened and precision ground - Modern main spindle bearings with precision angular contact ball bearings - Heavy-duty cast machine base - Tailstock can be offset ± 5 mm for taper turning - Ideal for technical colleges, repair shops, and training workshops - Simple and precise speed and feed adjustment - Space-saving installation due to pull-out chip tray at the front - Removable gap bridge for machining large diameter workpieces - Optimal price-performance ratio, modern design - Supplied as standard with integrated overload clutch Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. passage diameter 90 mm - Travelling steady rest – max. passage diameter 70 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - 320 mm faceplate - Four-way toolpost - Safety guard for four-way toolpost - Overload clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centre points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE - Operating tools

Sąlyga: naujas, Disc diameter 250 mm Grinding wheel dimensions 250 x 25 x 20 mm Speed 2850 rpm Voltage 400 V Total power requirement 2.0 kW Machine weight approx. 23.0 kg Space requirement approx. 600 x 290 x 300 mm Pgsdpfxjxak H So Af Nog Features: - Heavy-duty design and high-quality components - Ideal for professional use - Perfect for satin finishing and polishing - Achieves mirror-smooth surfaces on various materials - Compatible with optionally available polishing wheels and polishing pastes - Lockable ON/OFF switch compliant with IP54 featuring undervoltage release - Includes copper-wound motor for long service life - Equipped as standard with rubber feet for vibration-free operation - Extremely smooth running thanks to balanced rotor with quality ball bearings - Well-designed machine body made from high-quality die-cast material - Suitable for polishing metal, plastics, and non-ferrous materials Scope of delivery: - Soft polishing wheel - Hard polishing wheel - User manual in German

Sąlyga: naujas, Grinding width: 32.0 mm Max. grinding wheel diameter: 250 mm Grinding wheel dimensions: 250 x 32 x 32 mm Speed: 2850 rpm Grit: K 36 / K 80 Motor power: 1.5 kW Voltage: 400 V Weight: 30.0 kg Dimensions (L x W x H): 510 x 320 x 360 mm Features: - ON/OFF switch to IP54 standard with undervoltage release - Extended operating range thanks to optional grinding attachment - Universal use for a variety of materials (metal, plastic, etc.) - High running smoothness due to balanced rotor with high-quality ball bearings - Includes motor with copper winding for long service life - Large safety goggles for optimal spark protection - Robust and adjustable workpiece support made of cast iron - Powerful torque thanks to high-performance drive motor Scope of delivery: - Rough grinding wheel K 36 - Fine grinding wheel K 80 - Double-sided spark protection Pgjdpfx Afoxaa Ais Neg - Workpiece support

Sąlyga: naujas, Cutting diameter: 225 mm Saw band length: 2480 mm Table height: 910 mm Cutting capacity at 90° flat: 245 x 150 mm Cutting capacity at 90° square: 200 x 200 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° square: 160 x 160 mm Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 100 x 100 mm Speed range: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Pgsdpfx Afsxaa Tbo Nsg Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Equipment: - For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for mitre cuts - Infinitely adjustable lowering via hydraulic downfeed cylinder - Torsion-free, heavy-duty saw arm made of cast iron - 2 saw band speeds for optimal cutting results (400 V) - Robust construction ensures smooth and vibration-free operation - Automatic end stop after cutting through the material - Sturdy cast iron vice with quick-locking feature - Ball-bearing guided saw band with quick adjustment for adaptation to workpiece width, ensuring optimal results Scope of delivery: - Saw band - Workpiece stop - Base frame - Pressure gauge for band tension - Vice with quick-locking - Coolant system - Hydraulic downfeed cylinder - Motor protection switch - Automatic end stop

Sąlyga: naujas, Drilling performance in steel (diameter): 25.0 mm Throat depth: 180 mm Drilling stroke: 80.0 mm Morse taper: 2 MT Spindle speed: 180 - 2270 rpm Table size: 305 x 305 mm Table tilt: +/- 45 degrees T-slots: 16.0 mm Column diameter: 72.0 mm Operating voltage: 400 V Total power requirement: 1.10 kW Weight: 57.0 kg Dimensions (L x W x H): 400 x 630 x 990 mm Description: - Standard equipment includes digital quill stroke display and work light - Extremely smooth operation thanks to cast iron belt pulleys - High-quality ball bearings ensure precise spindle concentricity - Large-sized drill table with diagonally arranged T-slots - Drill table tiltable (± 45°), height adjustable via rack-and-pinion Pgedpfoxaa Thox Af Njg - Forward/reverse rotation switch - Powerful and high-torque aluminum motor to IP 54 - Precision quick-action drill chuck included - Standard with T-slots in the ground base plate - Ergonomic handles for comfortable operation Scope of delivery: - Quick-action drill chuck 1 – 16 mm / B 18 - Drill chuck arbor MT 2 / B 18 - Digital quill stroke display - Machine light - Forward/reverse rotation - Safety guard - Height-adjustable safety guard - T-slot nuts - Operating tools

Sąlyga: naujas, Turning length 850 mm Swing diameter 400 mm Swing over cross slide 245 mm Spindle bore 52.0 mm Speed range 45 - 1800 rpm Bed width 260 mm Spindle mount DIN 55029 D 1-5 Tailstock taper 3 MT Quill travel 120 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1255 kg Dimensions (L x W x H) 1900 x 1000 x 1610 mm The Compact 400 precision lathe is a modern machine engineered to the latest technological standards. The basic configuration already includes all essential accessories (3-axis digital readout, steadies, LED machine light, safety devices compliant with CE regulations, etc.), making this machine universally applicable. Thanks to its high user-friendliness, it is especially suitable for training workshops, educational institutions, and schools. Features Pgedpfexaaxwex Af Neg - To minimize vibration effects, the robust prismatic bed is additionally ribbed - Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. - Simple, smooth, and precise speed and feed selection - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including in the feed gearbox - Central, ergonomic control for feeds and threads via lead and feed shaft - The one-piece cast machine bed is extremely torsion-resistant and low-vibration, providing an essential prerequisite for accurate turning - Space-saving installation thanks to a front pull-out chip tray - Standard 52 mm spindle bore for machining large shaft diameters Standard equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Face plate 320 mm - Fixed steady rest – maximum workpiece diameter 130 mm - Travelling steady rest – maximum workpiece diameter 100 mm - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake according to CE regulations - Initial fill with Shell Tellus 46 - Pull-out chip tray - LED machine light - Change gears - Reducing sleeve - 2 centers - Rear chip guard - Operating tools

Sąlyga: naujas, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis digital readout Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly, €672.00 net, not included in the price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Tailstock quill diameter: 45 mm Tailstock quill travel: 100 mm Tailstock taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, as per DIN 55029 • Fixed steady rest – max. pass-through diameter 90 mm • Travelling steady rest – max. pass-through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray Pjdpfx Aogd Iagsf Nsgg • Clamping plate 320 mm • Four-way toolpost • Safety device at four-way toolpost • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 live centers • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE-standard) / operator tools Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly; price: €672.00 net, not included in the price)

Sąlyga: naujas, Bernardo Panel Saw FKS 2000 Pro / 400 V Technical Specifications - Table dimensions: 800 x 380 mm - Sliding table: 2000 x 270 mm - Rip length: 2000 mm - Max. saw blade diameter: 315 x 30 mm - Max. cutting height 90° / 45°: 100 / 80 mm - Cutting width at rip fence: 1200 mm - Table height: 870 mm - Table extension: 500 x 310 mm - Table widening: 800 x 880 mm - Outrigger table with roller: 700 x 580 mm - Main saw blade speed: 4000 rpm - Scoring blade speed: 5800 rpm - Scoring blade: 90 x 20 mm - Extraction port Ø: 100 mm - Motor output S1 100%: 3.8 kW (5.1 HP) - Motor input S6 40%: 5.3 kW (7.2 HP) Psdod N Tagspfx Af Negg - Voltage: 400 V - Machine dimensions (W x D x H): 2000 x 2900 x 1180 mm - Weight approx.: 280 kg Scope of delivery • Carbide saw blade 315 x 3.0 x 30 mm / Z 40 • Scoring blade 90 x 3.0 x 20 mm / Z 12 • Saw blade guard with extraction port • Connection hose with Y-piece • Mitre gauge with excenter clamp • Mitre gauge • Rip shoe • Table extension • Table widening • Parallel fence • Extendable telescopic stop • Stop flap with fine adjustment • Outrigger table • Push stick • Push handle • Operating tools Features • Extendable telescopic stop (up to 2260 mm) can be mounted front and rear on the outrigger table, infinitely swiveling from 90° to 45° • Key performance feature: Saw blade diameter 315 mm can be used even with scoring unit installed • Large work table and standard table widening for cutting widths up to 1200 mm • Powerful drive motor for constant cutting speed, even at 100 mm cutting height • Mitre gauge and hold-down clamp adjustable along the full carriage length • Aluminium parallel fence with micrometric fine adjustment • Rigid saw unit guarantees vibration-free and precise operation • Solid outrigger table with roller and telescopic arm for maximum stability • Anodised aluminium sliding table available in two different lengths

Sąlyga: naujas, Bernardo Belt Grinding Machine MS 75 x 2000 DC-2 / 400 V Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 18 / 36 m/sec Contact wheel Ø x width: 200 / 75 mm Flat grinding table: 500 x 75 mm Extraction port Ø: 2x 100 mm Extraction capacity: 520 m³/h Extraction motor speed: 2780 rpm Extraction motor power: 0.37 kW Motor output power S1 100%: 2.5 / 3.3 kW Pgsdopag Tdjpfx Af Nog Motor input power S6 40%: 3.3 / 4.3 kW Voltage: 400 V Length: 1130 mm Width: 520 mm Height: 1130 mm Weight approx.: 104 kg Scope of Delivery • Sanding belt K 80 • Hinged protective screen • Integrated extraction system • 2x aluminium extraction hoses, diameter 100 mm • Filter bag • Grinding and support table • Workpiece stop • Motor protection switch • Rubber-coated sanding roller • Graphite slip plate • Separate emergency stop button • Base frame

Sąlyga: naujas, Bernardo Horizontal Band Saw HBS 275 PRO Technical Specifications Pgsdpjfigzzsfx Af Nsg Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speed: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 1.1 kW Motor intake power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 180 kg Scope of Delivery • Saw blade • Workpiece stop • Machine base • Manometer for blade tension • Saw blade guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end shut-off

Sąlyga: naujas, Bernardo Universal Lathe Compact 400 V Technical Specifications Center Distance: 850 mm Center Height: 200 mm Swing Over Bed: 400 mm Swing Over Cross Slide: 245 mm Bed Width: 260 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range, 2 Steps: 50 – 450 / 450 – 2500 rpm Longitudinal Feed Range: (20) 0.025 – 2 mm/rev Cross Feed Range: (20) 0.012 – 1 mm/rev Metric Threads: (26) 0.2 – 14 mm Inch Threads: (42) 1 – 80 TPI Quill Diameter: 50 mm Quill Travel: 120 mm Quill Taper: MT 3 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 1900 x 1000 x 1610 mm Approx. Weight: 1185 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control with digital speed display • Massive prism bed additionally ribbed to minimize vibration • Versatile applications in general engineering, production, single-part manufacturing, etc. • Modern precision main spindle bearings with angular contact ball bearings • One-piece cast bed, highly torsion-resistant and low-vibration—essential for precise turning Pgjdpfxed Ertro Af Nsg • Space-saving setup thanks to pull-out chip tray at the front • 52 mm spindle bore as standard for machining large shaft diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Face plate 320 mm • Fixed steady rest – max. 130 mm diameter • Follow rest – max. 100 mm diameter • Coolant system • Quick-change tool post with 4 holders • Splash guard for quick-change tool post • Micrometer longitudinal stop • Slip clutch • Motor with electromagnetic brake (CE compliant) • Initial fill with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine light • Change gears • Reducing sleeve • 2 live centers • Chip guard • Service tools

Sąlyga: naujas, Bernardo Belt Grinding Machine MS 150 x 2000 DC-2 / 400 V Technical Specifications Belt dimensions: 150 x 2000 mm Belt speed: 18 / 36 m/sec Pjdopag Ttopfx Af Njgg Contact wheel Ø x W: 200 / 150 mm Flat grinding table: 500 x 150 mm Extraction connection Ø: 2x 100 mm Extraction capacity: 520 m³/h Extraction speed: 2780 rpm Extraction motor power: 0.37 kW Motor output S1 100%: 2.5 / 3.3 kW Motor input power S6 40%: 3.3 / 4.3 kW Voltage: 400 V Length: 1130 mm Width: 600 mm Height: 1130 mm Weight approx.: 116 kg Scope of Delivery • Sanding belt K 80 • Foldable protective screen • Integrated extraction system • 2x aluminium extraction hoses Ø 100 mm • Filter bag • Grinding and support table • Workpiece stop • Motor protection switch • Rubber-coated grinding roller • Graphite slip layer • Separate emergency stop button • Base frame

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, bendras plotis: 850 mm, bendras ilgis: 1 850 mm, bendras aukštis: 1 250 mm, bendras svoris: 660 kg, darbinio aukščio: 650 mm, galia: 1,6 kW (2,18 AG), Parduodama naudota, pilnai veikianti, pilnai automatinė juostinė pjūklas su ritininio padavimo sistema, turinti šias technines specifikacijas: - Pjovimo sritis apvali 90°: 320 mm - Pjovimo sritis plokščia 90°: 320 x 300 mm - Pjovimo sritis kvadratinė 90°: 300 x 300 mm - Darbo aukštis: 650 mm - Pjovimo greitis, be laipsnių: 20 - 100 m/min - Pjūklo juostos matmenys: 3660 x 27 x 0,9 mm - Aušinimo skysčio siurblys: 120 W - Variklio galia: 1,5 kW - Įrenginio matmenys (I x P x A): 1850 x 850 x 1250 mm - Svoris apie 660 kg Valdymo pastabos: Įveskite medžiagos ilgį arba nurodykite elementų skaičių. Tuomet paspauskite Start. Užduotis bus automatiškai vykdoma nurodytam vienetų kiekiui. Galimas įrenginio apžiūros laikas tik iš anksto susitarus ir įjungus į elektros tinklą. Nurodyta kaina yra be PVM. Pgsdpsyfta Hofx Af Neg

Sąlyga: naudotas, Gamybos metai: 2015, Techniniai duomenys: Sūkių skersmuo virš lovos: 420 mm Sūkių skersmuo virš pastūmos: 255 mm Sūkių ilgis: 1000 mm Sūkių skersmuo įlaidoje: 580 mm Centras aukštis: 205 mm Darbinio veleno anga: 52 mm Sūkių diapazonas: 30 - 550 / 550 - 3000 (dažnio keitikliu valdomas) / 2 pavarų žingsniai aps./min. Paviršinis padavimas, išilgai: 0,05 - 1,7 mm/aps. Paviršinis padavimas, skersai: 0,025 - 0,85 mm/aps. Galvutės kūgio laikiklis MK: 4 Pjdpfxevaxi Eo Af Nogg Galvutės pinolės eiga: 120 mm Bendras elektros poreikis: 5,5 kW Įrenginio svoris apie: 1,5 t Įrenginio matmenys (I x P x A): 2,1 x 1,1 x 1,5 m Galimas sriegimas, pvz., metriniai ir coliniai sriegiai Bepakopis sūkių reguliavimas 3 ašių pozicijų indikatorius Sino SPSG-3V 3-žandis griebtuvas NOLEX Ø 200 mm Greitai keičiamas plieno laikiklis Multifix, dydis B Griebtuvo apsauga (su stebėsena) Drožlių apsauginė sienelė Įrenginio apšvietimas Aušinimo skysčio sistema Priedai: 2x greitai keičiamas plieno laikiklis Multifix (1x sumontuotas)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Juostinis šlifuoklis HBM 75 x 2000 Demonstracinis įrenginys, beveik naujas, su nežymiais naudojimo pėdsakais Pagaminimo metai: 2012 Aprašymas – Universalus naudojimas: kraštų, paviršių ir cilindriniam šlifavimui – Grafitinis sluoksnis ant lygaus šlifavimo paviršiaus pagerina šlifavimo juostos slydimą Pedoydn Tfspfx Af Njgg – Nuolatinė juostos įtampa dėl spyruoklinės įtempimo sistemos – Patogus šlifavimo juostos keitimas, greitas ir paprastas – Galingas šlifavimas dėl didelio juostos greičio – Greitas perstatymas iš horizontalios į įstrižą padėtį – Universalus naudojimas tiek amatininkams, tiek pramonei – Didelė lygaus šlifavimo zona su apsauginiu gaubtu – Įskaitant juostos lygiagretaus bėgimo smulkųjį reguliavimą Komplektacija – Šlifavimo juosta K 80 – Šlifavimo ir atraminis staliukas – Gumuotas šlifavimo volas – Apsauga akims – Dulkių ištraukimo jungtis – Grafitinis sluoksnis – Variklio apsaugos jungiklis – Stovas

Sąlyga: naujas, Universally applicable bending machine for sheet metal workshops and repair operations. Working length: 1270 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width: 45 mm Bending angle: 0 - 135° Width: 1620 mm Depth*: 1115 mm Height: 1150 mm Weight approx.: 340 kg * with backgauge Features: - Versatile bending machine for sheet metal shops and repair services - Robust construction with modern design - Easy adjustment of the upper beam via foot pedal, hands remain free for the workpiece Pgjdpfx Afsvnrk Ej Njg - Manual bending machine for standard bending tasks - Segmented upper beam provides a wide range of bending options - Excellent price-performance ratio - Fast and easy bending process via bow handle - Simple adjustment of the lower beam to match sheet thickness - High upper beam for producing profiles with high upstands Scope of delivery: - Segmented upper beam - Backgauge - Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Sąlyga: geras (naudotas), Saw roller stand, saw roller support, saw horse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, bandsaw, cold circular saw -Roller height: 570 to 970 mm -Roller: Ø 52 x 355 mm Pedpsvm Sv Sjfx Af Negg -Dimensions: 500/420/H570 mm -Weight: 14 kg

Sąlyga: geras (naudotas), Gamybos metai: 2020, Drilling machine, pedestal drilling machine, pillar drilling machine, column drilling machine, tapping machine Pedpfxjwrbpde Af Nsgg - Manufacturer: Bernardo, geared pillar drilling machine model GB 35 Vario - Spindle taper: MT3 - Motor: 1.5 kW - Speeds: 65 – 460 rpm / 460 – 3250 rpm, infinitely variable, reversible (right/left rotation) - Feed: 0.1 / 0.2 / 0.3 mm/rev - Clamping table: 420 x 345 mm, tiltable - Travel: 340 mm - Quill stroke: 160 mm - Throat: 320 mm - Column diameter: 120 mm - Tapping device - Coolant system: 20 l/min - Dimensions (LxWxH): 870 x 560 x 2340 mm - Weight: 401 kg

Sąlyga: geras (naudotas), Saw roller stand, roller support, saw horse, roller conveyor stand, roller stand Podpowvfmbjfx Af Nsgg - Roller stand: roller support suitable for hacksaws, band saws, cold circular saws, etc. - Roller height: 445 to 565 mm - Roller: Ø 55 x 270 mm - Dimensions: 370/315/H445 mm - Weight: 22 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Drilling capacity in steel (diameter): 40 mm Throat depth: 370 - 950 mm Workpiece height - max.: -- mm Spindle speeds: 50 - 316 / 316 - 2000 rpm Spindle taper: MK 4 Thread cutting diameter min. / max.: M30 Drill head swivels from -90° to +90° Quill stroke: 200 mm Feed rate (6): 0.08 - 0.50 mm/rev Distance spindle / table: 390 - 780 mm T-slots: 18 mm Column diameter: 220 mm Total power requirement: 2.2 kW Machine weight approx.: 2.8 t Space requirement approx.: 2.45 x 1.2 x 2.72 m Pjdpfx Asxwdvbsf Nsgg Display machine // very good condition * Motor-driven height adjustment of the drill head without alteration of the drilling position – ideal for deep hole drilling * Drill head swivels 180°, boom can be moved forward-backward and swiveled horizontally * Thread cutting device and 6 automatic drill feeds * Large table surface (1195 x 500 mm) for clamping multiple workpieces at the same time * Digital speed and drilling depth display * Quick setup of the drill head on the workpiece, hydraulic clamping * With electronically variable speed control * User-friendly operation via membrane keypad Scope of delivery: Thread cutting unit LED machine lamp Coolant system Height-adjustable safety guard Electromagnetic spindle feed Digital speed display Digital drilling depth display Electrically adjustable drill head height

Sąlyga: naujas, Turning length: 1500 mm Swing diameter: 560 mm Swing diameter over support: 350 mm Spindle speed: 25-220/220-1500 rpm Swing diameter over cross slide: 350 mm Swing diameter in gap: 785 mm Quill stroke: 185 mm Spindle bore: 105.0 mm Motor power: 7.5 kW Spindle mount: DIN 55029 D 1-8 Quill taper: 5 MT Machine weight approx. 2,420 kg Dimensions (LxWxH): 2840 x 1150 x 1610 mm Description: - Equipped as standard with Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load - Infinitely variable speed control, the set speed is displayed digitally - Versatile applications in general mechanical engineering, production, one-off manufacturing, etc. - Removable gap bridge enables machining of workpieces with large diameters - Standard with rapid traverse longitudinally and transversely to reduce idle times - Modern main spindle bearing with high-precision angular contact bearings - The machine bed, cast in one piece, is extremely torsion-resistant and low in vibration - Tailstock can be offset for taper turning - Central lubrication for the carriage Equipment: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest – max. workpiece diameter 180 mm - Follow rest – max. workpiece diameter 120 mm - Foot pedal with CE-compliant braking function - Safety device for quick-change tool post - LED machine light - Initial fill with Shell Tellus 46 - Face plate 450 mm - 2 centers - Frequency inverter - Digital speed display - Slip clutch - Rapid traverse longitudinally and transversely Pgodexaau Eepfx Af Nsg - Coolant system - Quick-change tool post with 4 holders - Change gears - Reducing sleeve - Chip guard - Service tools