Bernardo Wb 100 pirkti naudotą (208)

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 700 kg, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, Parduodamas universalus ratinis šlifavimo staklės BERNARDO URS 1000 N, pagamintas 2021 m. Staklės yra praktiškai naujos būklės ir naudotos vos kelis kartus. Iš pradžių jos buvo įsigytos siekiant išplėsti mūsų apdirbimo galimybes. Tačiau vėliau, pasikeitus mūsų įmonės veiklos profilui, staklės nebuvo reguliariai naudojamos gamyboje. Staklės parduodamos ne dėl techninių gedimų ar sutrikimų. Staklės yra labai geroje, beveik naujos būklės, su minimaliais naudojimo žymėmis. Šios staklės tinka tiksliam išorinių velenų ratiniam šlifavimui ir vidiniam šlifavimui. Turėdama 1000 mm tarp centrų ir iki 320 mm šlifavimo skersmenį, ji tinka, be kita ko, įrankių gamybai, mechaniniam apdirbimui, velenų ir staklių dalių gamybai bei atnaujinimui, taip pat atskirų detalių ir mažų serijų gamybai. Tiesioginis pardavimas iš staklių savininko – SAWA Electronic, Lenkija. Pagrindiniai techniniai duomenys: Gamybos metai: 2021 Tarp centrų: 1000 mm Centrų aukštis: 180 mm Išorinis šlifavimo skersmuo: 8–320 mm Maksimalus apdirbamo gaminio svoris: 150 kg Vidinis šlifavimo skersmuo: 30/35–100 mm Maksimalus vidinis šlifavimo gylis: 125 mm Apdirbamo gaminio veleno sukimosi greitis: 25–220 aps./min. Šlifavimo diskas: 400 × 50 × 203 mm Šlifavimo veleno sukimosi greitis: 1670 aps./min. Vidinio šlifavimo veleno sukimosi greitis: 10 000 aps./min. Šlifavimo galvutės pasukimo kampas: ±30° Hidraulinis stalo padavimas Gbedjzz Nbwepfx Abrjw Skaitmeninis padėties indikatorius Maitinimo įtampa: 400 V Staklių svoris: apie 3700 kg Matmenys: apie 3700 × 1900 × 1500 mm Įranga: Vidinių paviršių šlifavimo įranga Trijų žandų griebtuvas Ø200 mm Atramos Aušinimo skysčio tiekimo įranga Skaitmeninis padėties indikatorius Šlifavimo disko korekcijos įtaisas Šlifavimo disko balansavimo įtaisas Kaina: 14 200 EUR be PVM. Kaina: 62 000 PLN be PVM. Staklių vieta: Regimin, Mazovijos vaivadija, Lenkija. Staklių apžiūra ir demonstracija galima iš anksto susitarus.

Būklė: naujas, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Round steel 18.0 mm Machine weight approx. 33.0 kg Features: - For precise cold and hot bending of flat, round, and square steel - Sturdy construction for bolting to the workbench - Continuously adjustable bending stop with locking pin - With eccentric quick clamping for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops ---- Gjdjxcux Ropfx Abrebw Bending capacity cold: Flat steel 100 x 5 mm + 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot: Flat steel 100 x 15 mm + 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm ---- Scope of delivery: - Sharp/radius bending plate - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Būklė: naudotas, Bernardo T 1000S tipo sukamoji frezuojamoji staklė, skirta įvairiems frezavimo darbams atlikti iš masyvios medienos, plokščių ir profilių. Ši staklė idealiai tinka stalių dirbtuvėms ir baldų gamykloms, kurioms reikalingi tikslūs ir našūs frezavimo sprendimai. Staklė turi sukamąją vėlelę, stumiamąjį slidyną, kampinį atramą ir pneumatinį prispaudėją. Techniniai duomenys: - Frezuojamosios vėlelės skersmuo: 30 mm - Sukimosi greičio diapazonai: 1400 / 3500 / 6000 / 800 aps./min. - Apkrovos ilgis: 125 mm Gbedszryqkspfx Abrew - Variklio galia: 4,0 kW

Būklė: naudotas, Rankinis kampinis išpjoviklis BERNARDO, modelis AK100 Rankinė kampinių išpjovų staklė Gamyklinis Nr. A17010320 Pagaminimo metai: 2017 Peilio ilgis: 100 mm Medžiagos storis prie 40 kg/mm²: maks. 3 mm Iškirpimo kampas: 90° Eigos dydis: 28 mm Stalo paviršius: 380 x 280 mm Gbjdpfx Asyhq Aqobrjw - reguliuojami atmušai - Svirties ilgis 650 mm, trūksta 500 mm prisukamos pratęsimo Matmenys (I x P x A): 380 x 380 x 1000 mm (su 650 mm svirtimi) Savas svoris: 90 kg geros būklės

Būklė: naujas, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis digital readout Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly, €672.00 net, not included in the price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Gbsdpogd Iagjfx Abrow Tailstock quill diameter: 45 mm Tailstock quill travel: 100 mm Tailstock taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, as per DIN 55029 • Fixed steady rest – max. pass-through diameter 90 mm • Travelling steady rest – max. pass-through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Four-way toolpost • Safety device at four-way toolpost • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 live centers • Foot pedal with brake function (CE compliant) • Motor with magnetic brake (CE-standard) / operator tools Special accessories: Multifix toolpost head, 3 straight holders, 1 prism holder (factory assembly; price: €672.00 net, not included in the price)

Būklė: naujas, Bernardo Belt Grinder KBR 100 x 2000 Duo Belt dimensions: 100 x 2000 mm Belt speed: 15 / 30 m/sec Min./max. tube diameter: 20 – 76 mm Carriage adjustment: 30° – 90° Flat grinding table: 400 x 100 mm Contact wheel (diameter x width): 195 x 100 mm Extraction port diameter: 2 x 100 mm Gbedpfxjd Id Ubj Abrow Speed: 1410 / 2850 rpm Motor output (S1 100%): 2.2 / 2.8 kW (400 V) Motor input power (S6 40%): 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H): 750 x 1450 x 1160 mm Weight: approx. 158 kg Features - Consistent belt tension thanks to spring-loaded tensioning device - Standard with pipe grinding attachment for tubes from 20 – 76 mm diameter - Fast and simple adjustment of the desired grinding angle - Graphite coating on flat grinding area improves belt glide characteristics - Large flat grinding surface with protective cover - Slow belt speed (15 m/sec) ideal for grinding stainless steel and aluminium - User-friendly, quick and uncomplicated belt change - Fast and tool-free change of grinding rollers - Various grinding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery - Grinding belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 3/4" tube (26/28 mm tube) - 2 pcs. lift-up safety screens - Pipe grinding device - Grinding and support table - 2 x dust extraction nozzles, diam. 100 mm - 2 pcs. chip collection containers - Graphite slip lining - Motor protection switch

Būklė: naujas, Gamybos metai: 2026, sukimosi skersmuo virš skersinio stumduko: 255 mm, veleno skylė: 52 mm, tekėjimo skersmuo: 420 mm, tekėjimo ilgis: 1 000 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 30 aps./min, bendras svoris: 1 145 kg, Įranga: sūkių greitis be galo kintamas, The universal lathe Smart 410 Pro Vario is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model offers an ideal solution for mechanical workshops, tool rooms, and maintenance departments. Main features: - Cast iron bed, induction-hardened and precisely ground - Mechanical foot brake to reduce downtime - Removable gap bridge for machining larger workpieces - Quiet and smooth operation thanks to hardened and ground gearbox gears - Easy and quick feed and speed adjustment - Solid construction ensuring vibration-free operation - Adjustable tailstock for taper turning with a handwheel and precise 0.02 mm graduation - Central control system for feeds and threading with leadscrew and feed shaft - Modern main spindle bearings with precision angular ball bearing - 3-axis digital readout included - Stepless spindle speed control based on inverter with display, allowing perfect adaptation to the workpiece Technical specifications: - Distance between centers: 1000 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle nose taper: DIN 55029, D1-6 - Spindle speed (min): 30 rpm - Spindle speed (max): 3000 rpm - Speed change – number of ranges / stepless: stepless (30 – 550 / 550 – 3000) - Longitudinal feed range: (17) 0.05 - 1.7 mm/rev - Cross feed range: (17) 0.025 - 0.85 mm/rev - Metric thread range: (42) 0.2 - 14 mm Gbodpfjyr I Sqsx Abrow - Imperial thread range: (45) 2 - 72 TPI - Quill diameter: 50 mm - Quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 5.5 kW - Voltage: 400 V - Dimensions (W x D x H): 2090 x 1050 x 1600 mm - Weight approx.: 1145 kg Scope of delivery: - 3-jaw chuck DK11-200 mm / D6 - 350 mm faceplate - Fixed steady rest – max. passage 135 mm - Travelling steady rest – max. passage 65 mm - Coolant system - Four-way toolpost - Micrometric longitudinal stop - Thread dial indicator - Magnetic brake according to CE standard - Electromechanical spindle brake - Filled with Shell Tellus 46 oil - Halogen work light - Change gears - 2 live centers - Chip tray - Service tools - 3-axis digital readout - Stepless speed adjustment - Legally required safety guards - Full technical documentation (DTR) in Polish - CE Certificate - 24-month warranty for all customers without surcharge

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 370 mm, Device for copying original components or according to a template Infinitely variable spindle speed adjustment ensures optimal adaptation to the workpiece High spindle speed accuracy Robust cast iron construction ensures vibration-free operation High-quality belt drive provides optimal power transmission to the spindle Quick-clamping lever allows for easy locking of the tailstock on the bed Digital spindle speed display included in the scope of delivery Technical specifications Distance between centers: 1100 mm Swing over bed: 370 mm Copying diameter*: 160 mm Spindle speed min.: 500 rpm Spindle speed max.: 2000 rpm Speed stages: infinitely variable Gbodpfxjytc R Ro Abrjw Spindle thread: M33x3.5 Tailstock taper: MK 2 Tailstock quill travel: 50 mm Copy length: 850 mm Motor power: 1.1 kW Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions – width: 1650 mm Dimensions – depth: 750 mm Dimensions – height: 1150 mm Weight approx.: 92 kg Scope of delivery 300 mm tool rest 150 mm faceplate Rotating live center Drive dog Copy device Basic tools Base

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Pressure: 40.0 t Bending length: 1,600 mm Frame width: 1,200 mm Throat depth: 200 mm Ram speed: 60.0 mm/sec Return speed: 80.0 mm/sec Working speed: 60.0 mm/sec Stroke: 100 mm Table height: 760 mm Gbsdpfx Aoxabumjbrsw Table width: 150 mm Oil capacity: 130 l Operating voltage: 400 Volt Control: ESA E21 Total power requirement: 4.0 kW Weight: 3,030 kg Dimensions (LxWxH): 2,050 x 1,800 x 2,030 mm Demonstration / demo machine (!!) from our showroom (like NEW) with very few operating hours Equipment: - Compact hydraulic press brake - BERNARDO NC control model E21 - Swivelling control panel - Electrically adjustable backgauge - Backgauge with ball screws - Electrically adjustable ram depth - Front laser safety device - Split gooseneck top tool - Quick-change tool holder system - Universal die block - Lateral and rear safety guards - 2x front support arms - Mobile double foot switch (operation)

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Distance between centres: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Gjdpsxl Dx Eofx Abrsbw Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1 – 6 Speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MK 4 Motor power: 3.0 / 4.5 kW Machine dimensions (W x D x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prismatic bed made of cast iron, inductively hardened and precision ground • Electromechanical foot brake for reduced idle times • Central, user-friendly control lever for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing with precision angular contact ball bearings • Large, hardened and precision-ground gears • Hardened and ground gears and shafts, also in feed gearbox • Simple, smooth, and precise speed and feed adjustment • Travelling tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large diameter workpieces Scope of Delivery • Prismatic bed made of cast iron, inductively hardened and precision ground • Electromechanical foot brake for reduced idle times • Central, user-friendly control lever for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing with precision angular contact ball bearings • Large, hardened and precision-ground gears • Hardened and ground gears and shafts, also in feed gearbox • Simple, smooth, and precise speed and feed adjustment • Travelling tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large diameter workpieces

Būklė: naudotas, Gamybos metai: 2017, Hidraulinis plokščių šlifavimo staklės „Bernardo BSG 2040 TDC“, naudotas 🧰 Produkto savybės: • Gamintojas: „Bernado“ • Modelis: BSG 2040 TDC • Būklė: naudotas, žr. nuotraukas • Spalva: mėlyna-balta • Pagaminimo metai: 2017-06 • Nominali talpa: 3500 kg • Svoris: 1650 kg • Įtampa: 400 V Gbjdpozzdf Dofx Abrsw 💰 Kaina 5 900 € (be PVM) • Nuolaida už didesnį kiekį: teirautis • Privatūs pardavimai: nėra minimalaus užsakymo kiekio • Siuntimo išlaidos: visoje Europoje, teirautis • Pristatymo laikas: galima pristatyti nedelsiant • Apžiūra ir atsiėmimas: galima bet kuriuo metu, iš anksto susitarus Visada sandėlyje turime daugiau nei 5000 metrų ilgio paletinių lentynų iš įvairių gamintojų. (Pasilieka teisė keisti ir klaidingai pateikti techninius duomenis, specifikacijas ir kainas, taip pat prekiauti tarpinėmis partijomis! Žr. mūsų bendrąsias sąlygas, visos kainos nurodytos be PVM, iš sandėlio.)

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control, with digital speed display • Hardened and ground gears and shafts, including the feed gearbox • Standard rapid traverse in longitudinal and cross directions to reduce non-productive time • Central, user-friendly control for feeds and threads, with leadscrew and feed rod • Large-dimensioned, hardened and precision-ground gears • Simple, smooth, and precise speed and feed setting • The machine bed, cast in one piece, is extremely torsion-resistant and low in vibration, providing the basis for precise turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Initial fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE brake function • Coolant system • Frequency inverter • Slip clutch • Rapid traverse, longitudinal and cross • Change gears • Reducing sleeve • 2 centre points • Thread indicator • LED machine lamp • Chip guard Gbedpoxl Tcaofx Abrew • Service tools

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Gbsdpfxsxl Taro Abrew Technical Specifications Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx.: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control with digital readout of the set speed • Prism bed made of cast iron, inductively hardened and precision ground • Central, easy-to-operate control for feeds and leadscrews with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Simple, smooth, and precise speed and feed adjustment • Sliding tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm) • Removable gap bed allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – maximum pass-through diameter 135 mm • Traveling steady rest – maximum pass-through diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Adjustable turret stop • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 center points • Chip guard • Operating tools

Būklė: naujas, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Pipe diameter: 20 - 76 mm Adjustable angle: from 30° to 90° Extraction port diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding device: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm The KBR 100 x 2000 DUO is a multifunctional grinding machine designed for front-end grinding of pipes and profiles, grinding of edges and surfaces, as well as round grinding at the rear and flat grinding on the top of the machine. Features: - Consistent belt tension via spring-loaded clamping mechanism - Round grinding device included as standard - For grinding diameters from 20 to 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite coating on the flat grinding surface to enhance the sliding properties of the belt - Large flat grinding surface with protective cover - Slow belt speed (15 m/sec.) – optimal for stainless steel and aluminium grinding - User-friendly, quick belt change Gsdjxab Dzspfx Abrsbw - Fast, tool-free switching of grinding rollers - Various grinding angles from 30° to 90° can be set without difficulty - Shorter processing times compared to milling Scope of delivery: - Grinding belt K 36 - Rubber-coated grinding roller - 1 pc. grinding roller for 1 1/4" pipe (42/44 mm pipe) - 2 pcs. flip-up protective screens - Grinding and support table - 2 x dust extraction ports, 75 mm diameter - 2 pcs. chip collection bins - Graphite coating - Motor protection switch

Būklė: naujas, Bernardo pusiau automatinė dvigubo kampo juostinė pjovimo staklė MBS 600 DGA-V / 400 V Techninės specifikacijos Pjovimo sritis apvali / kvadratinė 90° 410 mm / 300 x 300 mm Pjovimo sritis stačiakampė 90° 540 x 300 mm Pjovimo sritis apvali / kvadratinė 45° dešinė 400 mm / 260 x 260 mm Pjovimo sritis stačiakampė 45° dešinė 400 x 210 mm Pjovimo sritis apvali / kvadratinė 45° kairė 340 mm / 260 x 260 mm Pjovimo sritis stačiakampė 45° kairė 380 x 170 mm Pjovimo sritis apvali / kvadratinė 60° dešinė 260 mm / 175 x 175 mm Darbinis aukštis 965 mm Juostos matmenys 4290 x 34 x 1,1 mm Pjovimo greitis, reguliuojamas 20–80 m/min Aušinimo siurblys 100 W Variklio nominali galia S1 100 % – 2,2 kW Variklio maksimali galia S6 40 % – 3,0 kW Įtampa 400 V Įrenginio matmenys (I x P x A) 2340 x 1430 x 1550 mm Svoris apie 686 kg Pusiau automatinio veikimo principas: • Hidraulinis veržtuvo prispaudimas • Hidraulinis pjūklo lankelio nuleidimas • Pjūklo lankelio pakėlimas Komplektacija • Pjūklo juosta • Ruošinio ribotuvas • Pagrindo rėmas • Manometras juostos įtempimui Gbsdpfxszibdtj Abrew • Pjūklo juostos kreiptuvas su kieto metalo įdėklais • Greito užspaudimo veržtuvas • Aušinimo įrenginys • Hidraulinis nuleidimo cilindras • Variklio apsaugos jungiklis • Automatinis išsijungimas

Būklė: naujas, Bernardo dviguba kampinė juostinė pjūklas MBS 400 DG / 400 V Techninės specifikacijos Pjovimo sritis apvalus / kvadratinis 90° – 315 mm / 270 x 270 mm Pjovimo sritis plokščias 90° – 400 x 250 mm Pjovimo sritis apvalus / kvadratinis 45° dešinė – 280 mm / 280 x 280 mm Pjovimo sritis plokščias 45° dešinė – 300 x 280 mm Pjovimo sritis apvalus / kvadratinis 45° kairė – 250 mm / 220 x 220 mm Pjovimo sritis plokščias 45° kairė – 280 x 200 mm Pjovimo sritis apvalus / kvadratinis 60° dešinė – 180 mm / 140 x 140 mm Darbo aukštis – 870 mm Juostos matmenys – 3460 x 34 x 1,1 mm Pjovimo greitis – 35 / 70 m/min Aušinimo siurblys – 100 W Variklio nominali galia S1 100 % – 2,2 kW Variklio įvado galia S6 40 % – 3,0 kW Įtampa – 400 V Įrenginio matmenys (I x P x A) – 2150 x 1400 x 1420 mm Svoris – apie 550 kg Komplektacija Gjdpfxszibbxj Abrsbw • Juostinis pjūklas • Ruošinio atrama • Stovas • Manometras juostos įtempimui matuoti • Kietmetaliniai juostos kreiptuvai • Greito užveržimo spaustuvas • Aušinimo sistema • Hidraulinis nuleidimo cilindras • Variklio apsaugos jungiklis • Automatinis išjungimas

Būklė: naujas, Turning length 1000 mm Swing diameter 380 mm Swing diameter over gap 490 mm Spindle bore 51.0 mm Spindle speed 70 - 2000 rpm Bed width 185 mm Spindle mount 55029 D 1-5 Tailstock taper MK 4 Quill travel 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 575 kg Dimensions (L x W x H) 1920 x 800 x 1660 mm Description: The lead and feed screw lathe Master 380 impresses with its robust construction and user-friendly operation. Even the standard configuration includes all essential accessories (3-axis digital readout, steadies, LED machine lamp, safety features according to CE, ...) Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, per DIN 55029 - Fixed steady rest - max. passage diameter 70 mm - Travelling steady rest - max. passage diameter 50 mm - Coolant system - Initial fill with Shell Tellus 46 - Extendable chip tray - Mounting plate 320 mm - Four-way toolpost - Safety guard for four-way toolpost - Slip clutch Gjdpfx Abjxabv Rerobw - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 live centers - Foot pedal with brake function, CE compliant - Motor with magnetic brake, CE compliant - Machine base with drawers - Operating tools

Būklė: naujas, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed slide 255 mm Turning diameter in the gap 580 mm Spindle bore 52.0 mm Spindle speed 30-550 / 550-3000 rpm Bed width 250 mm Spindle mount 55029 D 1-6 Tailstock taper 4 MT Quill stroke 140 mm Total power requirement 5.5 kW Machine weight approx. 1145 kg Dimensions L-W-H 2090 x 1050 x 1600 mm The universal lathe Smart 410 Pro Vario is suitable for light and medium-duty turning operations. Even the basic configuration includes all essential accessories (3-jaw chuck, steadies, change gears, 3-axis digital readout, etc.), making this machine universally applicable. Furthermore, this model is equipped with an infinitely variable spindle speed up to 3000 rpm, allowing the speed to be optimally adjusted to the workpiece and feed rate. Features: - Standard with Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load - Infinitely variable speed control - The set speed is shown on a digital display - Prism bed made of cast iron, inductively hardened and precision ground - Central, user-friendly feed and thread selection with lead and feed shaft - Modern main spindle bearing with precision angular contact ball bearings - Standard with frequency inverter and 3-axis digital readout - Hardened and ground gears and shafts, also in the feed gearbox - Simple and precise speed and feed adjustment - Smooth and accurate gear shifting - Moveable tailstock for taper turning - Handwheel with adjustable fine graduation (0.02 mm) - Removable bridge allows machining of large-diameter workpieces Scope of delivery: - 3-axis digital readout ES-12 V with LCD display Gbodpfx Abexaakyorsw - 3-jaw steel chuck PO3-200 mm / D6 - Face plate 350 mm - Fixed steady - max. Ø 135 mm - Travelling steady - max. Ø 65 mm - Foot pedal with brake function according to CE - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency inverter - First fill with Shell Tellus 46 - Coolant device - Slip clutch - Threading dial - LED machine lamp - Change gears - Reducing sleeve - 2x centre points - Chip guard - Operating tools

Būklė: naujas, Turning length: 1000 mm Swing diameter: 360 mm Swing diameter in gap: 480 mm Spindle bore: 51.0 mm Spindle speed: 70 - 2000 rpm Bed width: 185 mm Spindle mount: 55029 D 1-5 Tailstock taper: 4 MT Quill travel: 110 mm Total power requirement: 1.5 kW Machine weight approx.: 540 kg Dimensions (L-W-H): 1920 x 750 x 1600 mm Features: - Standard with 51 mm spindle bore for machining large shaft diameters - Ideal for technical schools, repair shops, and training workshops - Optimally suited for machining steel, non-ferrous metals, and plastics - Removable gap bridge for machining workpieces with large diameters - Space-saving installation thanks to forward-extending chip tray - Simple, smooth and precise speed and feed adjustment - Electromechanical foot brake to reduce non-productive time - Modern main spindle bearing with precision angular contact ball bearings - Prism bed made of grey cast iron, induction-hardened and precision-ground - Single-lever clamping for tailstock, adjustable for taper turning - Guaranteed spindle nose runout accuracy (= 0.009 mm) - Main spindle hardened and ground, running in an oil bath - Tailstock, headstock, and all guides adjustable Equipment: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Steady rest - max. diameter 70 mm - Follow rest - max. diameter 50 mm - Coolant system - Initial fill with Shell Tellus 46 - Pull-out chip tray - Clamping plate 320 mm - Four-way toolpost - Safety device for four-way toolpost - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears - 2 centers Gbjdjxaawaepfx Abrsw - Foot pedal with brake function according to CE - Motor with magnetic brake, CE compliant - Stand - Operating tools

Būklė: naujas, Bernardo dviguba kampinė juostinė pjūklas MBS 600 DG / 400 V Techninės specifikacijos Pjovimo sritis apskrita / kvadratinė 90°: 410 mm / 300 x 300 mm Pjovimo sritis plokščia 90°: 540 x 300 mm Pjovimo sritis apskrita / kvadratinė 45° dešinė: 400 mm / 260 x 260 mm Pjovimo sritis plokščia 45° dešinė: 400 x 210 mm Pjovimo sritis apskrita / kvadratinė 45° kairė: 340 mm / 260 x 260 mm Pjovimo sritis plokščia 45° kairė: 380 x 170 mm Pjovimo sritis apskrita / kvadratinė 60° dešinė: 260 mm / 175 x 175 mm Darbo aukštis: 866 mm Juostos matmenys: 4290 x 34 x 1,1 mm Pjovimo greičiai: 45 / 90 m/min Aušinimo siurblys: 100 W Variklio vardinė galia (S1 100%): 2,2 kW Variklio maksimali galia (S6 40%): 3,0 kW Įtampa: 400 V Įrenginio matmenys (ilgis x plotis x aukštis): 2340 x 1430 x 1460 mm Svoris: apytiksliai 606 kg Komplektacija • Juostinis pjūklas • Ruošinio atrama • Stovas • Manometras juostos įtempimui • Juostos kreiptuvas su kietmetalio įdėklais Gedpfx Abszibc Asrsbw • Greito prispaudimo spaustukas • Aušinimo įranga • Hidraulinis nuleidimo cilindras • Variklio apsaugos jungiklis • Automatinis galinis jungiklis

Būklė: naudotas, Diskinis pjūklas-frezavimo staklės Bernardo CSM2000, gera būklė, 3 kW, 315/30 mm, apie 2200 mm pjovimo ilgis, apie 100 mm pjovimo aukštis, apie 500 kg Kainos gali keistis, galimi neatitikimai, spaudos ir rinkinio klaidos. Gbodpfx Aex H Ufbsbrow

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 - 1700 rpm Longitudinal Feed Range: (42) 0.055 - 3.065 mm/rev Cross Feed Range: (42) 0.025 - 1.386 mm/rev Gbedpfx Aoqwkd Uobrjw Metric Threads: (41) 0.1 - 14 mm Inch Threads: (60) 2 - 112 TPI Tailstock Quill Diameter: 60 mm Tailstock Quill Travel: 130 mm Tailstock Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features • Modern main spindle bearings with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, ergonomic control for feeds and threads with leadscrew and feed shaft • Large-dimensioned, hardened, and precision-ground gears • Simple, smooth and precise speed and feed selection • Standard with rapid traverse longitudinal and cross to reduce non-productive time • One-piece, heavily ribbed machine bed for maximum torsional rigidity and minimal vibration, ensuring high turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 tool holders • Safety cover for quick-change tool post • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 live centers • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Būklė: naujas, Kvadratinė plienas 20x20 / 25x25 mm Plokščias plienas 100 x 7,0 mm Apvalus plienas 22,0 / 27,0 mm Kampinis plienas 100 x 10 mm Mašinos svoris apie 33,0 kg Matmenys I-P-A: 900 x 430 x 310 mm Savybės: - Tikslus plokščio, apvalaus ir kvadratinio plieno šaltas ir karštas lenkimas - Tvirta konstrukcija tvirtinimui prie darbastalio - Nuolat reguliuojama lenkimo atrama - Greitas ekscentrinis fiksatorius efektyviam darbui - Lenkimo kampo rodmuo iki 120° - Aukštas pasikartojimo tikslumas dėka kampinės atramos - Idealiai tinka remonto dirbtuvėms ir šaltkalviams Gjdpoxcuyhsfx Abrsbw Lenkimo pajėgumas „šaltai“: Plokščias plienas: 100 x 7 mm + 65 x 12 mm Apvalus plienas: 22,0 mm Kvadratinė plienas: 20 x 20 mm Kampinis plienas: 100 x 10 mm Lenkimo pajėgumas „karštai“: Plokščias plienas: 100 x 15 mm + 75 x 20 mm Apvalus plienas: 27,0 mm Kvadratinė plienas: 25 x 25 mm Kampinis plienas: 100 x 15 mm Komplektacija: - Lenkimo plokštė - Kampinė atrama su nuolatine reguliacija - Prispaudimo blokas su ekscentriniu fiksatoriumi - Medžiagos atrama

Būklė: naujas, Turning length 1000 mm Swing diameter 460 mm Swing diameter over bed slide 270 mm Turning diameter in gap 690 mm Spindle bore 80.0 mm Spindle speed 25 - 1700 rpm Bed width 300 mm Spindle mount DIN 55029 D 1-8 Tailstock taper 4 MT Quill stroke 130 mm Total power requirement 5.5 kW Machine weight approx. 1675 kg Gsdpfx Abexab H Aorebw Dimensions (L x W x H) 2300 x 1080 x 1600 mm Description: The universal lathe Solid 460 Pro has been specially designed for the efficient production of single components and small batches with high precision. The basic configuration already includes all essential accessories, making this machine suitable for universal use. Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Faceplate 450 mm - Coolant system - Initial fill with Shell Tellus 46 - Fixed steady rest - max. clearance diameter 150 mm - Travelling steady rest - max. clearance diameter 110 mm - Quick-change tool post with 4 holders - Guard on quick-change tool post - Motor with magnetic brake, CE compliant - Foot pedal with brake function, CE compliant - Overload clutch - Rapid traverse longitudinal and cross - Change gears - 2 dead centers - Reducing sleeve - Threading dial - LED machine lamp - Chip guard rear wall - Operating tools

Būklė: naujas, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed carriage 255 mm Turning diameter in the gap 580 mm Spindle bore 52.0 mm Spindle speed 45 - 1800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper 4 MT Quill travel 140 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1220 kg Dimensions L-W-H 2070 x 900 x 1600 mm The Smart 410 Pro universal lathe is suitable for performing light and medium-duty turning operations. The basic configuration already includes all essential accessories (3-jaw chuck, steadies, change gears, etc.), making the machine highly versatile. To reduce production times, this model comes standard with a 3-axis digital readout. Features: - Prism bed made of grey cast iron, induction-hardened and precision ground - Electromechanical foot brake to reduce non-productive times - Central, easy-to-use feed and thread control via leadscrew and feed rod - Modern main spindle bearing with precision angular contact ball bearings - Large-dimensioned, hardened and precision ground gears - Hardened and ground gears and shafts, including in the feed gearbox - The speed and feed settings are straightforward, smooth and precise - Adjustable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - Removable bridge allows machining of workpieces with large diameters Equipment: Gbsdpfx Ajxaavvobrew - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Face plate 350 mm - Fixed steady - max. passage diameter 135 mm - Travelling steady - max. passage diameter 65 mm - Coolant system - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread dial indicator - Motor with magnetic brake, CE-compliant - Foot pedal with brake function, CE-compliant - Initial fill with Shell Tellus 46 - LED machine lamp - Change gears - Reducing sleeve - 2 centres - Chip guard - Operating tools - Operating manual