Juostinis šlifuoklis

Bernardo KBR 100 x 2000 Duo

Būklė: naujas, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Pipe diameter: 20 - 76 mm Adjustable angle: from 30° to 90° Extraction port diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding device: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm The KBR 100 x 2000 DUO is a multifunctional grinding machine designed for front-end grinding of pipes and profiles, grinding of edges and surfaces, as well as round grinding at the rear and flat grinding on the top of the machine. Features: - Consistent belt tension via spring-loaded clamping mechanism - Round grinding device included as standard - For grinding diameters from 20 to 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite coating on the flat grinding surface to enhance the sliding properties of the belt - Large flat grinding surface with protective cover - Slow belt speed (15 m/sec.) – optimal for stainless steel and aluminium grinding - User-friendly, quick belt change - Fast, tool-free switching of grinding rollers - Various grinding angles from 30° to 90° can be set without difficulty - Shorter processing times compared to milling Scope of delivery: - Grinding belt K 36 - Rubber-coated grinding roller - 1 pc. grinding roller for 1 1/4" pipe (42/44 mm pipe) - 2 pcs. flip-up protective screens - Grinding and support table - 2 x dust extraction ports, 75 mm diameter - 2 pcs. chip collection bins Kedpexab Dzjfx Aauolr - Graphite coating - Motor protection switch

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, lazerio bangos ilgis: 1 030 nm, galia: 5 kW (6,80 AG), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Klodpfsr Izwmox Aauer Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 2: >= 4 mm x mrad, >= 100 µm NA01 Beam quality output 4: >= 4 mm x mrad, >= 100 µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection kit: yes Ethernet in user area: multiple Number of occupied LLK: 4 Number of intelligent optics: 4 Number of occupied couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with appendix

Būklė: naujas, Technical Data: Belt speed: 15 / 30 m/s Grinding diameter: 20 - 76 mm Slide adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel (diameter x width): 195 x 100 mm Extraction port diameter: 2 x 75 mm Kledpfsqvmqysx Aausr Speed: 1420 / 2660 rpm Motor power: 2.5 / 3.3 kW Dimensions (W x D x H), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Constant belt tension through spring-loaded tensioning device - Standard equipment includes cylindrical grinding attachment for diameters 20 - 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite coating on the surface grinding area enhances belt glide properties - Large surface grinding area with protective hood - Slow belt speed (15 m/s) ideal for grinding stainless steel and aluminium - User-friendly, fast and uncomplicated belt change - Quick and easy tool-free change of grinding rollers - Various grinding angles from 30° to 90° possible without difficulty - Shorter processing times compared to milling Scope of delivery: - Grinding belt K 36 - Rubber-coated grinding roller - 1 pc. grinding roller for 1 1/4" (42/44 mm tube) - 2 pcs. hinged protective screens - Grinding and support table - 2 x dust extraction nozzles, diameter 75 mm - 2 pcs. chip collection containers - Graphite lining - Motor protection switch

Būklė: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR Kodpjd Eqqqsfx Aauolr

Gamybos metai: 1977, būklė: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Kledpfxjd N Rb De Aauer

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Kjdpfx Aajfpb Nmsuolr Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus Mach. No. P30180/150 Year of manufacture: 1998 Centre distance 1250 mm Swing over bed 400 mm Klodsh Hvk Ajpfx Aauor Centre height 200 mm Swing over cross slide 245 mm Max. turning diameter in gap 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock taper MK 5 Spindle bore 54 mm Spindle nose size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Level 1): 15-275 rpm Spindle speed range (Level 2): 35-795 rpm Spindle speed range (Level 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis max. 2000 mm/min. Rapid traverse Z-axis max. 4000 mm/min. Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power 7.5 kW Electrical connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC - Language in French (France) - Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various transmission ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolholder size B with 2 tool inserts - 1 live center - 1 quick-action drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged working area safety doors - Swarf tray with coolant device beneath the machine bed - Control cabinet fixed to the machine - RS 232 interface Required space (L x W x H) 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Būklė: naujas, Gamybos metai: 2026, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Kledpfx Asg U Uv Rsauor Saw arm lowering by gravity or manually Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. Kledpfx Aasfz U S Esujr It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Kedpfx Aaod N H A Nsujlr Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition