Bano Caldaie pirkti naudotą (685)

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7018-5 Nsdpfx Ajn E Sk Ejf Iocl Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerants: R404A and R23 For your security as a buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical specifications!) Should you have further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber VTS 7033, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Heating rate: 7.5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: width 825 mm x depth 800 mm x height 870 mm Outer housing dimensions: 1080 mm x 1710 mm x 1950 mm Side feedthroughs: 12 cm and 13 cm Nedpfxjlt U Avj Af Iscl Voltage: 400V +6/-10%, 3/N, 50Hz Rated power: 9.5 kW; Rated current: 22 A Refrigerants: R404A / R23 Volume: approx. 570 liters; Weight: 580 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. New fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Type: VTS 7033 Condition: used Scope of delivery: (see photo) (Alterations and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), EDAG Huf Endurance Test Bench Purpose: This test bench is intended exclusively for testing components capable of rotational and/or linear movement within the scope of endurance testing and within the limits set by the following technical data. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight: approx. 450 kg Operating voltage: 400V / 50Hz Control voltage: 5, 24 V Preliminary fuse: 16 A Nedsvx S Apepfx Af Iocl Testing device: Maximum stroke: 194 mm Maximum axial force: 500 N Maximum torque: 5 Nm Breakaway force (manually operated slide): 15 N Displacement force (manually operated slide): 10 N Other equipment: Ρ4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC interface cards: 1 card, NI PCI-6251; 1 card, NI PCI-7044 Drawer: 500 mm (full extension with automatic closing), Additional load: 500 N Lockable drawer cabinet, 3 drawers The Teach-in Endurance Test Bench is a device for conducting endurance tests on test objects that may perform rotational and/or linear movements, e.g. cylinder locks, door handles, key functions. Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into housings. In conjunction with a timer, the test cycle can be automated with an adjustable testing duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for tests based on protection classes IPX3 and IPX4. The integrated water recirculation system minimizes water consumption. Features Glass door with wiper Pneumatic drive for the oscillating tube Adjustable oscillation angle Interchangeable oscillating tubes Njdpfxovzz A Rs Af Iocl Swiveling and replaceable nozzle holders Adjustable and measurable water flow rate Control of test duration Mechanical Load Data Max. load capacity (evenly distributed over surface) Permitted specimen weight for sample carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Chamber We offer you a Heraeus Vötsch climate chamber. Vötsch Climate Chamber VCS 7033 Water-Cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% rH Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side port: 90 mm diameter Approx. 330 L, Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Nsdspz H Hxjpfx Af Iocl Rated power: 9.5 kW Rated current: 17 A Refrigerants: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber for sale. Model: VC³ 4100 Air Cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature uniformity: ±0.5 to ±1.0 K Temporal humidity deviation: ±1 to ±3% RH Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Ncjdpfjqmn A Nsx Af Ijl Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 Buyer notice for your safety: The following measures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Nodpeqwim Eefx Af Ijcl Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), RS simulators We offer here a temperature test chamber. Water-cooled temperature test chamber Temperature range: -70°C to +180°C Temporal deviation: ±1 K according to DIN 50011 with empty test space Average heating rate: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling rate: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power consumption: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See picture) (Technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone. Nodpfxslp Hyts Af Iscl

Sąlyga: labai geros būklės (naudotas), Zwick Model: BZ2.5/TN1S Zwick Table-Top Testing Machine – Tensile Testing Machine Application Range: Versatile usage range, from plastic and elastomer testing to paper, textile, foam, and wire testing, as well as component testing. Load Frame: Max. test force (tension/compression): 2.5 kN Height (h1): approx. 770 mm Width (incl. electronics unit): 320 mm Depth (incl. electronics unit): 414 mm Working space height, min ... max: Crosshead angle mounted upwards: 227 ... 573 mm Crosshead angle mounted rotated 180°: 57 ... 403 mm (each without coupling bolts) Electrical specifications: Power supply: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See image) Ncjdpfxofnm Dqs Af Ijl (Specifications and technical data subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Ncsdpov Ewy Hsfx Af Isl Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase: 4.0 K/min Rate of Temperature Decrease: 3.0 K/min Maximum Heat Compensation: 550 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climatic Calibration Points: +23°C / 50% RH and +95°C / 50% RH Internal Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated Current: 11.0 A Maximum Rated Power: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerants: R-404A / R23 Ncjdpsv Tnd Sofx Af Iol Weight: approx. 130 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See images) (Subject to technical modifications and errors. All information without guarantee!) If you have any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Liebisch Type: S 1000 A-TR / 42016211 Chest-type chamber with 1,000-liter test volume for salt spray testing. Constamatic® TR This series features automatically controlled chest chambers of the type A-TR. The integrated device control is operated via a touchscreen. All functions are displayed through an intuitive touchscreen user interface. Technical Specifications: Device type: S 1000 A-TR External dimensions (W x D x H in mm): 2600 x 1120 x 1210 Internal test area dimensions (W x D x H in mm): 1535/1425 x 800/780 x 660/650 Maximum sample holder load: 10 kg per level, 10 kg total Operating voltage: 230 V +6/-10% Power rating S: 2700 W Humidification control range S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device protection: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1,000 liters Test solution reservoir: approx. / 150 liters Test solution consumption/hour: approx. / 0.7–1.0 liters Water fill volume (floor sump) KON: 15 liters Ncedpfxewf Dh Ns Af Ijl Weight: 450 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data; information is non-binding!) For further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Ncedpfx Ajun Rulsf Ijl Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CTS Model: C-40/350 Ex/l Water-cooled Climate Test Chamber ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for use in environments where explosive atmospheres may occur. Such devices are specifically engineered and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate (according to IEC 60068-3-5): Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0% r.h. over time The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: floor load 150 kg/m² Insert grid: stainless steel, support surface 620 x 600 mm Max. load per grid: 35 kg Total load with maximum racks: 100 kg Control system: 32-bit controller LCD operating panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for customer-side test object control Dimensions: Test volume: 350 litres Ncedpfx Afjwvr H Uj Iel Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP 54 Sound pressure level:

Sąlyga: naudotas, CEM CEM Smart 5 Turbo Model 907990 Professional Microwave Moisture Analyzer for Moisture and Solids Analysis Reliable Laboratory Analytics in Record Time The CEM Smart 5 Turbo is a state-of-the-art microwave drying system for rapid and precise determination of moisture and solids content in a wide range of samples. Ideally suited for applications in the food, chemical, pharmaceutical, and environmental sectors, this device delivers significant time savings while maintaining consistently high measurement accuracy. Product Features: - Turbo Technology with Intellitemp™ – Optimal temperature control to prevent burning or caking of samples - Rapid analysis times – results available within 60–180 seconds - High precision – measurement range from 0.1% to 99.9% moisture or solids - Versatile – suitable for solids, pastes, sludges, and liquids - User-friendly touchscreen operation - Interfaces – RS-232, USB, LIMS-compatible Typical Applications: Ncsdswv Ryyspfx Af Isl - Cheese, dairy products, meat - Paints, varnishes, plastics, polymers - Sludges, wastewater, organic residues - Creams, pastes, emulsions Technical Data – CEM Smart 5 Turbo Specification Device type: Microwave moisture analyzer / moisture balance Technology: Microwave drying with Intellitemp™ temperature regulation Moisture range: 0.1% – 99.9% Sample types: Solids, liquids, pastes, sludges, emulsions Analysis time: Typically 1–3 minutes Drying method: Direct microwave irradiation (non-rotating) Temperature control: Automatic (microwave-based, no fixed °C value) Weighing unit: Optional external scale connectable (up to 0.001 g resolution possible) Display/Operation: Color touchscreen, intuitive menu navigation Data interfaces: RS-232, USB, network (LIMS compatible) Logging: Barcode scanner & thermal printer (optional) Power supply: 230 V / 50–60 Hz Dimensions (W × D × H): approx. 41 × 44 × 37 cm Weight: approx. 18 kg Condition: used Scope of delivery: (See picture) (Specifications are subject to change. Errors and omissions excepted!) If you have further questions, we are happy to answer them by phone.

Sąlyga: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Njdpfxexb Dm Io Af Iscl Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Ncodpfxjw I Rxre Af Isl Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.

Sąlyga: naudotas, Techniniai duomenys (gamintojas/modelis – be garantijos): Didžiausia galia: „pagal gamintojo duomenis“ apie 10 kN Maks. pagreitis: „iki maždaug 1 000 m/s²“ Maks. greitis: „paprastai nuo apie 1 m/s iki kelių m/s“ Komponentai: Valdymo spinta TGA 022/3 Vibracijų sužadintuvas SW 6507 Galios stiprintuvas TG D 9000-000.00 Ncodpfx Aoxtdl Isf Isl Ventiliatorius Būklė: naudota Komplektacija: vibracijų bandymo įranga kaip pavaizduota (Techniniai duomenys gali keistis, klaidos galimos!) Dėl išsamesnės informacijos prašome kreiptis telefonu.

Sąlyga: naudotas, dr. wiesner Type: INTEGRA DDV -1...1 bar Product Description: dr. wiesner Integra Leak Test System The classic – suitable for all standard testing methods Leak testing system for industrial leak and flow testing applications with full graphic color display Up to three independent test circuits operable 255 test programs storable Automatic process optimization with autoTune (optional) Communication via flexible, interchangeable bus interface modules Freely programmable fixture control Freely programmable special test sequences The device is suitable for testing using the relative and differential pressure method with overpressure. Ncsdpfxowqm Dds Af Iol Special versions: None Technical Data: Power supply: 110 ... 230V~; 50 ... 60Hz (Connection via mains cable to XO plug) Pneumatic: clean and dry compressed air max. 7 bar (at connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Interfaces Electrical: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) Pneumatic: Test specimen connection (Test) Reference circuit connection (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (W x H x D) Weight: approx. 15.5kg Condition: used (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Tipas: VT 3050 Surinkimo dalys / Bandymų spinta Temperatūrinė kamera Oro aušinimas Nodpfjw S E N Tex Af Iecl Bandymų kameros tūris 500 litrų Temperatūros diapazonas -30°C /+100°C Laiko temperatūros svyravimas K ±0,5 Erdvinis temperatūros svyravimas K ±1,5 Temperatūros gradientas K 3 Keitimosi greitis Šildymas K/min 2,0 Vėsinimas K/min 1,4 Šilumos kompensacija maks. W 650 Kalibravimo vertės +23°C +80°C Bandyminės kameros matmenys Plotis 710 mm Gylis 590 mm Aukštis 1250 mm Išoriniai matmenys Plotis 940 mm Gylis 1030 mm Aukštis 1955 mm Garso slėgio lygis db(A)

Sąlyga: labai geros būklės (naudotas), Zwick Type: BT1-FR050TH.A1K 50 kN Materials Testing Machine Nodpfx Afew S Hvzs Ijcl Zwick/Roell BT1-FR050TH.A1K Materials Testing Machine – Precise Strain Gauge Testing Note: No PC included! Highlights: - Test force: 50 kN (tension / compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, measurement acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: Height 1,814–2,688 mm, Width 936 mm, Depth 722 mm - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial materials testing Dimensions & Weight: Load Frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronics unit: 230 kg - With typical fixtures: approx. 300 kg Condition: used Scope of delivery: (see picture) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Subject to technical changes and errors in the specifications!) For further questions, please contact us by phone.

Sąlyga: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Nodpfoun Rv Nsx Af Ijcl Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Sąlyga: naudotas, Vötsch Type: VCS 7034-5 Climate Test Chamber Water-cooled Test Chamber Volume: 335 liters Performance for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20°C 3000 W / at -20°C 3000 W Temperature calibration values: +23°C and +80°C Performance for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following steps are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone. Nedpfx Afjuxq T De Iecl

Sąlyga: geras (naudotas), CTS Type: TSR-30/1000 Ncjdsrivfcopfx Af Iol Water-cooled The type designation of the CTS cabinet series is structured as follows: Example: Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress-Screening 3) R stands for: External Conditioning 4) -30 stands for: minimum temperature -30°C 5) 1000 stands for: 1000 liters of test chamber volume Technical Specifications: A) TSR-30/1000 Base Unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Tests: - Temperature range: -40°C to +180°C - Ultimate temperature: -45°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 6.0 K/min * Cooling: 5.0 K/min - Heat radiation: * Approx. 5000 W at +20°C * Approx. 4200 W at ±0°C * Approx. 3000 W at -20°C The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment. Air Flow Volume: approx. 2000 m³/h B) TSR-30/1000 Base Unit with hose connections, for connection to an external customer-supplied test chamber Temperature Tests: - Temperature range: -30°C to +170°C - Temperature deviation: ≤ ±0.1 to 0.5 K over time - Average temperature change rate, measured in closed-loop: * Heating: 4.0 K/min * Cooling: 4.0 K/min (in the range of +150°C to -10°C) The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment, measured in closed-loop mode. Note: The external, customer-supplied test chamber must be absolutely airtight and properly insulated. Any feedthroughs must be optimally sealed by the customer. Dimensions: - Test volume: 1000 liters - Air recirculation connection Ø 200 mm - Chamber internal dimensions: Height 900 mm x Width 1000 mm x Depth 1100 mm - External dimensions: Height 1950 mm x Width 1270 mm x Depth 2245 mm Technical Design: Refrigeration Unit: - Water-cooled, low-noise, fully hermetic - Stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Door: - Fully openable door, left-hinged - One-hand operation, lockable Insert Rack: - Stainless steel, shelf area 970 x 980 mm - Maximum load per rack: 35 kg - Total load with maximum rack configuration: 100 kg Chamber Lighting: Halogen lamp 20 W, 12 V Control System: - 32-bit controller - LCD control panel Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, 50 Hz - Rated power: 13.3 kW - Protection class: IP 22 - Sound pressure level: < 60 dB(A) - Weight: approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and technical data errors! Information is provided without guarantee.) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), RS Simulators Type: ST2K320/45 Water-cooled shock test system Operating climate range Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Ambient temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Ncsdpfx Aotqcu Ejf Isl Refrigerant: R404A/2.5 kg Chamber weight: approx. 850 kg Important safety information for you as a buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. Specifications may vary!) If you have any further questions, we will be happy to answer them by phone.