Feutron Klimato Kameros pirkti naudotą (6)

Būklė: labai geros būklės (naudotas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0... ± 1.5 K/min Change rates - Heating: 2.0 K/min on average - Cooling: 2.0 K/min on average IEC 1646 standard testing is possible, including modules with a maximum weight of 160kg and non-linear ramps (setpoint jump). Drying - Air drying: condensation drying Humidity - Air humidification: steam humidification - Humidity range: 10...95% relative humidity - Temporal humidity deviation: ≤ ± 3.0... ± 5.0 % r.h. - Dew point range: 8...80.9°C Test chamber - Interior volume: 7.0 m³ - Interior dimensions: 1500 mm (W) x 2250 mm (H) x 2000 mm (D) - Hinged door DIN right, heated, with glass insert: 900 mm (W) x 2100 mm (H) - Viewing window, heated, with blackout panel and lockable: 500 mm (W) x 600 mm (H) - 2 feedthroughs in right front panel, Ø 75 mm Irradiation unit test chamber - 4 cutouts in left side wall for SC 2500, each 850 x 700 mm - Irradiated area when using SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0m wall distance: 1000 ± 10% W/m² - Lighting: 1x 200W halogen lamp Refrigeration unit - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: Split design (outdoor installation, winter control) - Refrigerants: R507 / R23 Temperature control system - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Cooling brine density: 1.072 kg/dm³ Fsdjklv H Ispfx Ac Dega - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Max. radiation absorption: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Test chamber power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 32.0 kW - Supply line fuse: 3 x 63A, Type C SolarConstant power supply - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: fixed connection - Max. simultaneous power requirement: approx. 30.0 kW - Supply line fuse: 3 x 63A, Type C External dimensions of the test chamber complete with: Equipment room / control cabinet and control cabinet for SolarConstant 2500 - Equipment room external dimensions: 3440 mm (W) x 2580 mm (H) x 2950 mm (D) - Control cabinet: 2200 mm (W) x 1830 mm (H) x 1100 mm (D) - Split condenser external dimensions: 900 mm (W) x 950 mm (H) x 2000 mm (D) Total weight test chamber: approx. 2700 kg Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a climate test chamber. Air-cooled Test chamber nominal volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Clear passage (door): 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Fsdpoiz Tqcefx Ac Dega Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climatic range: +10 to +95 °C Humidity range: 10 to 95% RH Humidity deviation, over time: ≤ ± 3.0 Water connection for humidifier: Mains water or distilled water, 20l storage tank Power supply: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your security as the buyer, please note the following! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Feutron Model: 3702/06 Water-cooled Climate Test Chamber Technical Data: Nominal test chamber volume: 2.0 m³ Dimensions: Test chamber exterior, including humidification console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum installation opening: Width 2970 mm, Height 2390 mm, Depth 1550 mm Test chamber internal dimensions: Width 2000 mm, Height 1000 mm, Depth 1000 mm Door: Double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing windows (heated), 2 pieces, width: 500 mm, height: 600 mm Cable port, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature variation over time: ≤ ±0.5...±1.0 ΔN/K Fgsdpsk E Hnqefx Ac Dea Change rates measured in supply air without load: Cooling: up to 2.0 average K/min Heating: up to 2.0 average K/min Humidity range: 10...95 % relative humidity Humidity variation over time: ≤ ±3.0 % r.H. Dew point range, temporarily: -5...95°C Cooling unit: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (M-K1) Climate and dryer refrigeration unit: air-cooled / hermetic system Refrigerant: R134a (M.KK) Power Supply: Electrical connection: 400V 3/N/PE AC, 50Hz Plug: CEE 5-pin, 32A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Circuit breaker: 3 x 25 A, type C Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Modifications and errors in the technical data and specifications excepted!) For further questions, feel free to contact us by phone.

Gamybos metai: 2012, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Feutron climate chamber Type: 3703/13 Humidity: 70% Year of manufacture: 2012 See more information in the attachments Door is damaged (paint damage) Fsdpfsvwm Nusx Ac Dega

Būklė: labai geros būklės (naudotas), Feutron Temperature Test Chamber We offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions Chamber external dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature Range -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Fsdpfjygulyox Ac Djga Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run, monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, air-cooled Nominal test chamber volume: 280 liters Fgodpeqxavaefx Ac Dja Dimensions: External chamber dimensions: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Internal test space: Width 720 mm x Height 690 mm x Depth 560 mm Door clear opening: Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation footprint of the temperature test chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough ports, 2 units on left side panel, Ø 100 mm Temperature range: -70°C to +180°C Heating rate: 3.0 K /min Cooling rate: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerants: R507 / R23 Buyer information for your safety: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Modifications and errors in technical data reserved!) For any further questions, we will be happy to assist you by phone.