Tiefenstegrahmen F. 1.200 Mm Regal / Lichte Stützweite: Ca. 1.100 Mm pirkti naudotą (102 266)

Būklė: geras (naudotas), Į komplektą įeina: 1 vnt. gilusis rėmo elementas, naudotas Medžiagos spalva: cinkuotas „Sendzimir“ būdu Bendras ilgis: apie 1250 mm skirtas lentynų gyliui: 1200 mm laisvas atramas atstumas: apie 1100 mm Bwsdpfx Aor Dr Sujg Iot skersinių atrama: apie 50 mm atramos kampas: L: apie 80 x 80 mm bendras plotis: apie 860 mm vidinis plotis: apie 855 mm medžiagos storis: apie 3 mm Šoninis rėmas: Ilgis: apie 1245–1070 mm priekyje – įstrižai Plotis: apie 200 mm Aukštis: apie 195 mm Galinis stabdys: Plotis: apie 200 mm Aukštis: apie 195 mm Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas Andre Evering Ponas Mario Klöver Ponas Falk Deutsch Bendroji informacija apie prekę: Tai naudota prekė, ant jos gali būti įbrėžimų, įlenkimų ir kitų naudojimo žymių. Ši prekė siūloma tik atsiėmimui. Jei pageidaujate, kad prekė būtų pristatyta, taip pat galimas siuntimas, tačiau tai kainuos papildomai. Kainą priklausomai nuo pristatymo vietos arba pristatymo apimties galima sužinoti atskirai.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard Bodpeh Ek Daofx Ag Iowt - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice Bwjdpfxemhhf Ss Ag Iot - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Bedpfomhh Dtsx Ag Iowt Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Bodpfxomkixws Ag Iowt The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard Bedpfx Agomidyfe Iowt - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Bwodpfjmhhl Hjx Ag Ijt Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level. Bwedpfx Aomhhx Isg Iet

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: Bwedjmhh Dhopfx Ag Iet - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm Bwjdpfx Agomhh Anj Ist - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Bwodpfxomhhypo Ag Iot We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: geras (naudotas), Technical specifications for the depth beam: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Depth beam, used Material color: grey Total length: approx. 1,108 mm for frame depth: approx. 1,100 mm Clear support width: approx. 999 mm Beam support width: approx. 55 mm Bedpfenl Dmkox Ag Ijwt Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 8.02 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or shipping of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Būklė: geras (naudotas), Included in the scope of delivery: 01x Rack connector, used Manufacturer: Stow Type: Pal Rack NS Material finish: sendzimir galvanized Total length: approx. 150 mm Bwedpfx Agjv Ua S Rj Ist Rack spacing: approx. 150 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Hole diameter: approx. 11 mm Weight: 0.200 kg | piece 02x Bolts M10 x 35 mm 02x Nuts M10 04x Washers M10 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipment of this item beyond collection is associated with additional costs, which can be obtained separately from us depending on the delivery location and scope.

Būklė: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Impact Protection Guardrail, used Total length: approx. 2,575 mm Clear span: approx. 2,400 mm Total height: approx. 600 mm Comprising: 02x Frame Profile, used Material colour: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear span: 2,300 mm 02x Post, used Material finish: hot-dip galvanized Total height: approx. 600 mm Including 2 welded base plates: approx. 200 x 80 x 10 mm Square profile: 90 x 90 mm Weight per piece: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is offered for collection only. Delivery or shipping of this item is possible at additional cost, which can be specified upon request depending on the destination and scope of delivery. Our services at a glance: (Prices on request) Assembly Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all racking systems Bwjdpfxshpuths Ag Iet Delivery with our own fleet (without unloading)

Būklė: geras (naudotas), Technical Data for Pallet Racking System: Racking System: SLP Technical Data for Installation: Number of rack rows: 01 pc Length per rack row: 15,480 mm Number of bays per rack row: 05 pcs Number of levels incl. ground level: 03 pcs Scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (welded truss construction) Height: 5,400 mm Depth: 1,100 mm 30x pallet rack beams, used Material color: grey IPE profile: 100 x 55 mm Bracket: 3 HK (hooks) Clear span: 3,000 mm 60x safety pins, used Material color: sendzimir galvanized Bodpfx Asxyf Rfsg Ijwt For securing the beams against unintentional lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x shim plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x load signage with information on bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If transportation or shipping beyond this is required, additional costs will apply, which can be requested from us, depending on the delivery location and scope of delivery.

Būklė: geras (naudotas), Technical Data for the Pallet Racking System: Racking System: SLP Technical Data for Installation: Number of Racking Rows: 01 unit Length per racking row: 21,640 mm Number of bays per row: 07 units Number of levels (plus ground level): 02 units Scope of delivery includes: 08x Pallet rack uprights, used Material finish: sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal bracing, Base plates Uprights are pre-assembled (welded truss construction) Height: 2,310 mm Depth: 1,100 mm 28x Pallet rack beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 HK (hooks) Clear span: 3,000 mm 56x Safety pins, used Material finish: sendzimir galvanized For securing the beams against unintentional lifting 32x Anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 16x Shim plates, used Design: completely galvanized For leveling rack uprights installed on uneven floors 01x Load signage plate with specifications on bay and shelf load, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact partners in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Should transport or shipping be required, Bwjdpfxexy Hcce Ag Iot additional costs will apply, which can be provided separately depending on the delivery location and scope. Please inquire for details.

Būklė: geras (naudotas), Technical Data for the Pallet Racking System: Rack system: SLP Technical Data for Installation: Number of rack rows: 1 pc. Length per rack row: 15,480 mm Number of sections per rack row: 5 pcs. Number of levels plus ground level: 4 pcs. Scope of delivery includes: 06x pallet rack uprights, used Material color: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Incl. cross and diagonal bracing, base plates The uprights are pre-assembled (welded lattice) Height: 6,870 mm Depth: 1,100 mm 40x pallet rack beams, used Bsdpfxjxx Tvyo Ag Iswt Material color: grey IPE profile: 100 x 55 mm Beam connectors: 3 hook Clear span: 3,000 mm 80x locking pins, used Material color: Sendzimir galvanized For securing the longitudinals against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Specification: Carbon steel, galvanized Approved for: cracked concrete 12x leveling plates, used Specification: fully galvanized For leveling rack uprights installed on uneven ground 01x load capacity sign with field and rack load data, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for self-collection only. Any desired transport or shipping of this item will incur additional costs, which can be requested separately depending on delivery location and scope of delivery.

Būklė: geras (naudotas), Technical Data for Pallet Racking System: Racking system: SLP Technical Data for Configuration: Number of racking rows: 1 unit Length per racking row: 14,640 mm Number of bays per racking row: 7 units Number of levels plus ground level: 2 units Scope of delivery includes: 08x pallet rack uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Including horizontal and diagonal braces, base plates The uprights are pre-assembled (welded truss construction) Height: 2,310 mm Depth: 1,100 mm 28x pallet rack beams, used Material finish: grey INP profile: 100 x 50 mm Connector: 3-hook system (HK) Clear span: 2,000 mm 56x safety pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional removal 32x anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete Bwodpfx Ajxy Ipqog Ist 16x leveling shims, used Design: fully galvanized For leveling the uprights that are installed on uneven floors 01x load sign with specifications for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping beyond this is subject to additional costs, which can be inquired with us separately depending on the delivery location and scope.

Būklė: geras (naudotas), Technical data for the pallet racking system: Racking system: Mecalux Setup technical data: Number of rack rows: 01 pc. Length per rack row: 17,100 mm Number of bays per rack row: 05 pcs. Number of levels incl. ground level: 05 pcs. Volume technical data: Pallet positions per bay: 24 pcs. Number of pallet positions per row: 120 pcs. Total number of pallet positions: 120 pcs. Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.a. Max. weight per pallet: 430 kg Scope of delivery includes: 06x pallet racking uprights, used Colour: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101-P Incl. horizontal and diagonal braces, base plates Bay load: 13,000 kg at buckling height 1,750 mm Load per compartment reduced to 2,600 kg Bwedpfx Ajvz Auhsg Ijt Uprights are pre-assembled (bolted framework) 9,500 mm high 1,100 mm deep 50x pallet racking beams, used Colour: orange Box profile: 120 x 50 mm Beam type: TB-S 120 Clear span: 3,300 mm Max. load per pair of beams: 1,750 kg with evenly distributed load 100x integrated locking pins, new For securing the longitudinal beams against unintentional lift-out 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: cracked concrete 12x levelling plates, used Version: completely galvanized For leveling the uprights when installed on uneven floors 01x load sign Listing bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional charges, which can be quoted separately depending on the place of delivery and scope of delivery.

Būklė: geras (naudotas), The scope of delivery includes: 01x depth beam, used Material color: Sendzimir galvanized Total length: approx. 1,020 mm Suitable for frame depth: approx. 1,000 mm Material thickness: approx. 2.40 mm Clear support width: approx. 880 mm U-profile dimensions: 58 x 50 mm Traverse support: approx. 67 mm Weight per piece: approx. 2.87 kg General information about the item: Bwsdpfxsi Dr S Ee Ag Iot This item is only available for collection. If transport or shipping is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Būklė: labai geros būklės (naudotas), Technical data for pallet racking uprights: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet racking upright, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted truss construction) Height: 9,650 mm Depth: 1,100 mm General information about the item: Bsdpfjk Uuv Sex Ag Ijwt This item is only available for collection. Any transport or shipping beyond this must be arranged separately, and additional costs will apply. Please contact us for a quote based on the delivery location and scope.

Būklė: geras (naudotas), Jūsų kontaktai mūsų įmonėje: Ponas: Andre Evering Bwjdpex Huh Asfx Ag Ist Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui vietoje. Jei pageidaujama prekės transportavimo ar siuntimo, taikomi papildomi mokesčiai, kuriuos galima atskirai sužinoti pagal pristatymo vietą ar apimtį.

Būklė: naudotas, Technical specifications for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery: 01x Pallet rack beam, used Material color: RAL 5010 Gentian Blue Bsdpetqrz Nefx Ag Iswt INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Connector: 5 HK (hooks) Clear span: approx. 1,800 mm Max. load capacity per pair of beams: 3,000 kg (with evenly distributed load) 02x Locking pins, used Finish: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is desired, this will incur additional costs, which can be provided separately depending on delivery location and scope of delivery.

Būklė: geras (naudotas), Technical data for pallet racking beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x Pallet racking beam, used Colour: RAL 5010 gentian blue INP profile: 120 x 58 mm Beam type: TRV1-360-12-l Bracket: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of beams: 3,600 kg, with evenly distributed load 02x Safety pins, used Version: fully galvanized For securing the cross beams against accidental lifting out Bjdpfx Agjw Ayvke Iowt Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipment of this item is required, additional costs will apply, which can be provided separately depending on the delivery location and order volume.

Būklė: naudotas,