Surfin Technology Miltelių Įranga pirkti naudotą (42 287)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 3 000 mm, bendras ilgis: 8 880 mm, bendras plotis: 4 000 mm, tūrio srautas: 38 000 m³/val, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 80 kg, suslėgto oro jungtis: 8 juosta, siurbimo galia: 38 000 m³/val, keliamoji galia: 80 kg, šildymo galia: 340 kW (462,27 AG), Įranga: apšvietimas, kabina, For sale: Nearly new wet paint coating line. Internal booth dimensions: 8880 x 4000 x 3000 mm. Overhead product conveyor, 41 m in length. Rotating suspension spacing: 400 mm. Load capacity: 80 kg/m. Maximum production speed: 4 m/min. Large cabin doors measuring 2000 x 2500 mm (suitable for coating large components). Exhaust ventilation unit: 38,000 m³/min. Paint preparation area including diaphragm pump 01D140. Electrostatic spray gun for application. Gas heating, 340 kW. Isdpfx Aowmm U Uobvoat

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 44 860 mm, bendras aukštis: 5 250 mm, bendras plotis: 17 100 mm, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 80 kg, įėjimo dažnis: 50 Hz, šildymo galia: 350 kW (475,87 AG), suslėgto oro jungtis: 8 juosta, ruošinio aukštis (maks.): 2 000 mm, ruošinio ilgis (maks.): 800 mm, tarpas tarp stulpų: 3 000 mm, kuras: buitinis dujos H, izoliacinė medžiaga: PUR, izoliacijos storis: 80 mm, ruošinio plotis (maks.): 800 mm, Įranga: apšvietimas, kabina, Parduodama 2021 m. miltelinio dažymo linijos aplikacijos dalis. Aplikavimo įranga NORDSON ENCORE HD, įkrovimo kaskados iki 100 kV įtampa, valdymo sistema POWDER PILOT, padavimo centras SPECTRUM HD II, dažymo pistoletai ENCORE HD (16 vnt.) + 2 rankiniai pistoletai, HDLV tipo siurblys (18 vnt.). Isdpfxjwhbnlo Abvsat

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Wagner pulvérizációs festékberendezés eladó! Porfestő berendezés, gyártási év: 2010. Az alábbi főbb egységekből áll: Festőkabin: Prima Cube 16000 Porszállító rendszer: Powder Center Porvisszanyerés: Cyclon Filter 16000 Mozgatóegység: KHG 350 Gyártási folyamat konfigurációk, TARTALMAZZA: I. Feltételezett paraméterek: Maximális alkatrészméret: HxSzxM=2600x400x1850 mm II. Berendezés: Technológiai szállítópálya automatikus sebességgel V=1,2 m/perc, Sebességszabályozás: 0,5–2,5 m/perc között 1. Előkezelő állomás MNA-3-LPG, teljes hossz: 16,7 m Belépő szakasz hossza: 2,5 m a. Mosás, zsírtalanítás és foszfátozás – hossza: 3,6 m - Permetezőkeretek száma: 10 db - Fúvókák száma keretenént: 18 db - Összes fúvóka: 180 db - Szivattyú teljesítménye: 162 m3/h - Szivattyú teljesítményfelvétel: 15 kW - Aktív folyadék tartály: 4 m3 - Belső hőcserélő LPG égővel – 160 kW - Hőmérséklet: 50°C - Mechanikus olajleválasztó - Oldatszűrő - Adagolórendszer, membránszivattyú szabályzóval - Mosási idő: 3 perc b. Csöpögtető zóna – hossza: 3,1 m - Csöpögtetési idő: 2 perc 30 mp c. Első öblítés – hossza: 1,2 m - Permetezőkeretek száma: 4 db - Fúvókák száma keretenént: 18 db - Összes fúvóka: 64 db - Szivattyú teljesítménye: 38 m3/h - Szivattyú teljesítményfelvétel: 3 kW - Víz tartály: 1,5 m3 - Első öblítési idő: 1 perc c. Csöpögtető zóna – hossza: 3,1 m - Csöpögtetési idő: 2 perc 30 mp d. Finom öblítés – hossza: 1,28 m - Permetezőkeretek száma: 3 db - Fúvókák száma keretenént: 18 db - Összes fúvóka: 54 db - Szivattyú teljesítménye: 33 m3/h - Tartály: 1,5 m3 vízhez - Szivattyú teljesítményfelvétel: 3 kW - Egy extra permetezőkeret - Fúvókák száma a keretben: 18 db - Finom öblítési idő: 1 perc e. Csöpögtető zóna – hossza: 2 m - Csöpögtetési idő: 1 perc 40 mp Három csatlakozási lehetőség az elszívó rendszerhez, három ventilátorral. A kezelési tér rozsdamentes acélból készült. A csövek PVC-ből vagy rozsdamentes acélból. 1 db 2. Automatikus vízelvonó szárító AST-1-KLPG: - Működtetési tér méretei HxSzxM=7000x3000x2800 mm - Mindkét oldalon légfüggöny a hőveszteség elkerülésére - Egy közvetett hőcserélő, LPG hajtású, 200 kW névleges teljesítménnyel - Három fúvó: 6000 m3/h légszállítás - Két elszívócsatlakozó - Hőmérséklet érzékelő és szabályozó - Túlmelegedés érzékelő - Keringtetés érzékelő - Működtetési tér horganyzott acélból - 200 mm vastag hőszigetelés - Szárítási idő: 10 perc 1 db 3. Automatikus beégető kemence APT-2-KLPG porszórt festékekhez: - Működtetési tér méretei HxSzxM=10200x3600x2800 mm - Egy oldalon légfüggöny a hőveszteség ellen - Két közvetett, LPG-vel fűtött hőcserélő, egyenként 300 kW-os - Nyolc keringtető fúvó, egyenként 6000 m3/h kapacitással Iedpfxoww Adto Abvsat - Két elszívó csatlakozás - Hőmérséklet érzékelő és szabályozó - Túlmelegedés érzékelő - Keringtetés érzékelő - Működtetési tér horganyzott acélból - 200 mm vastag hőszigetelés - Beégetési idő: 25 perc 1 db 4. Fejfeletti sínes szállítópálya rendszer ATR-ADAX a festőüzemhez, tartalmazza: - Egyenes pálya, akasztós felfüggesztéssel, hossza: 146 m - Meghajtóállomás: 2 db - Feszítőállomás: 1 db - Lánckenő állomás: 1 db - Pályaszerkezet rajz: 1 készlet

Būklė: labai geros būklės (naudotas), 2015 m. įkurtos baltymų miltelių gamyklos visi įrengimai. Visi įrenginiai puikios būklės. Įranga apima Winkworth tipo maišytuvą, All-Fill stiklainių ir kibirų pakavimo linijas, Pharma Systems kapsulių ir tablečių skaičiavimo įrenginius, sietus ir kt. Iedew Nivljpfx Abvjat

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. Ijdpfx Aefz U S Ejbveat All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 1 500 mm, ruošinio ilgis (maks.): 7 000 mm, Linija za elektrostatsko plastificiranje aluminijumskih profila – skoro nova, potpuno ispravna i spremna za prodaju Iodpfswvaaijx Abvjat Na prodaju je kompletna automatska linija za plastificiranje proizvođača NYS Equipments Co., Ltd., vrlo malo korišćena, potpuno funkcionalna i trenutno u komercijalnoj upotrebi. Ova linija je idealna za plastificiranje aluminijumskih profila maksimalnih dimenzija 7.000 x 300 x 1.500 mm (D x Š x V), sa kapacitetom do 15 nosača na sat. Osnovne tehničke karakteristike: ✅ Proces: automatsko elektrostatsko nanošenje praha sa 16 automatskih i 4 ručna pištolja tipa corona ✅ Peć za polimerizaciju: gasno grejanje (RIELLO), kapacitet 700.000 kcal/h, unutrašnje dimenzije 11,1 x 7,8 x 2,59 m, PID kontrola temperature sa preciznošću ±2 °C ✅ Sušara: gasno grejanje, kapacitet 200.000 kcal/h, unutrašnje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dvostruki lanac sa podesivim nosačima (razmak između nosača 2.250 mm), automatsko podmazivanje, pogonski motor snage 3,75 kW sa regulacijom brzine (0–6 m/min) ✅ Sistem za povraćaj praha: ciklon i after-filter sa automatskim vibracionim sitom i 24 filtera od dugih vlakana. Protok ventilatora do 19.263 m3/h, automatsko reverzno čišćenje filtera ✅ Sistem upravljanja: PLC sa touch-screen interfejsom, potpuno automatsko praćenje i kontrola procesa nanošenja, polimerizacije i povraćaja praha Dodatne pogodnosti: – Linija je u redovnom radu i može se pogledati uz mogućnost obuke osoblja – Prodaja je prema principu „viđeno–kupljeno“ (as is, where it is) – Demontaža i transport nisu uključeni u cenu, ali mogu biti organizovani na licu mesta Cena: 60.000 €

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Kulový mlýn s vzduchovým třídičem: Nejmodernější zařízení pro zpracování prachových materiálů Iajdpovlwkxjfx Abvot V oblasti průmyslové výroby prášků jsou přesnost, efektivita a flexibilita klíčové faktory. Ať už jde o produkci velmi jemných prášků pro high-tech aplikace nebo hrubších materiálů pro běžné produkty, kombinace kulového mlýnu se vzduchovým třídičem nabízí bezkonkurenční výkon. Toto dynamické duo představuje komplexní řešení pro odvětví sahající od chemického a keramického průmyslu až po barvy, plasty a farmaceutiku. Tento článek představuje kulový mlýn s vzduchovým třídičem, podrobně popisuje jeho použití a zdůrazňuje klíčové výhody tohoto nezbytného zařízení pro výrobu prášků. Obecné představení kulového mlýnu s vzduchovým třídičem Kulový mlýn s vzduchovým třídičem je pokročilý systém mletí a třídení navržený pro efektivní a kvalitní výrobu prášků. Systém sestává ze dvou hlavních komponent: 1. Kulový mlýn: Válcové zařízení plněné mlecími médii (například ocelovými kuličkami), které pracuje rotací okolo své osy. Vstupní materiál je zmenšován na menší částice pomocí nárazů a tření uvnitř mlýnu. 2. Vzduchový třídič: Sofistikované zařízení, které odděluje částice na základě velikosti pomocí proudění vzduchu. Jemné částice jsou odváděny, zatímco hrubší jsou vraceny zpět do kulového mlýnu k dalšímu mletí. Kombinace těchto dvou komponent vytváří uzavřený okruh, který zaručuje konzistentní rozložení velikosti částic, vysokou účinnost a minimální odpad. Použití kulového mlýnu s vzduchovým třídičem Kulový mlýn s vzduchovým třídičem je univerzálním řešením využívaným v široké škále průmyslových odvětví pro zpracování různých materiálů. Hlavní oblasti použití zahrnují: 1. Zpracování nerostů Systém je hojně využíván při výrobě minerálů, jako je uhličitan vápenatý, křemen, živec a mastek. Tyto jemně mleté minerály jsou klíčové pro keramiku, barvy, plasty a pryžářský průmysl. 2. Cement a stavební materiály Cement i ostatní stavební materiály vyžadují přesnou kontrolu velikosti částic pro optimální výkon. Kulový mlýn s vzduchovým třídičem zajišťuje homogenní směsi a zvyšuje kvalitu stavebních produktů. 3. Chemikálie a farmacie Jemné prášky hrají důležitou roli v chemickém i farmaceutickém průmyslu. Od účinných farmaceutických látek až po průmyslové chemikálie – tento systém zajistí požadovanou a konzistentní kvalitu. 4. Barvy, nátěry a pigmenty Výroba barev a nátěrů vyžaduje ultra jemné prášky pro dosažení hladkého vzhledu a živých barev. Kulový mlýn s třídičem produkuje vysoce kvalitní prášky pro prvotřídní výsledky. 5. Potravinářství a zemědělství Potravinářské prášky jako aditiva, konzervanty a zemědělské produkty (hnojiva) lze tímto systémem efektivně zpracovávat se splněním náročných regulačních požadavků. Oblasti průmyslu profitující z kulového mlýnu s vzduchovým třídičem Řada průmyslových oborů spoléhá na schopnosti tohoto systému při výrobě jemných prášků se specifickými vlastnostmi: - Keramika: Produkce vysoce čistých prášků pro dlaždice, izolátory a technickou keramiku. - Pryž a plasty: Výroba plniv a přísad pro zvýšenou odolnost a funkční vlastnosti. - Farmacie: Garance konzistentní velikosti částic API i excipientů. - Stavebnictví: Dodávka materiálů pro beton, omítky a další stavební účely.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 593 mm, bendras plotis: 2 700 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, galia: 6 kW (8,16 AG), įėjimo įtampa: 400 V, suslėgto oro jungtis: 6 juosta, tūrio srautas: 15 000 m³/val, filtravimo plotas: 45 m², plieno lakšto storis (maks.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Coating Extraction Unit FREE DELIVERY IN EUROPE Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Ijdpjy N Ubzsfx Abvsat Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, temperatūra: 250 °C, vidinis ilgis: 1 000 mm, vidinis plotis: 1 000 mm, vidinis aukštis: 1 500 mm, Hello, I am offering an Eliogtherm Kelvin curing oven / industrial dryer for sale. Similar to TRO ovens, Reinhardt ovens, or those made by Nabertherm. This high-quality dryer can be used for drying or curing paints, coatings, powder coatings, and screen prints at temperatures up to 250°C. The oven is also well-suited for preheating materials. It is approved for drying solvents, and the exhaust air is monitored by pressure switches. The oven is not only very well insulated on the walls but also at the base. Supply air is filtered through a large filter to prevent dust particles from entering the oven. The internal dimensions of the oven are 1000 mm x 1000 mm, height 1500 mm. Comprehensive documentation such as manuals, wiring diagrams, etc., is included. The oven is currently located in our warehouse near Cham in the beautiful Bavarian Forest—a visit would definitely be worthwhile. Iaodpfoy Svqiex Abvjt We are happy to organize shipping by freight carrier. Loading the oven on-site with a forklift poses no problem. If you have any questions, please feel free to contact us.

Būklė: naudotas, Gamybos metai: 2011, Miltelinio dažymo linija AABO Andersen Iajdpfx Aboyrnh Esvjt

Gamybos metai: 2025, būklė: naujas, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 Iaedpfjflk Awjx Abvst 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Gamybos metai: 2025, būklė: naujas, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 Iaodpfxjfz U Nbe Abvst 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Komplette Pulverbeschichtungsanlage mit automatischer Vorbehandlung und manueller Beschichtung. Iedpfxjylmd Es Abvoat Maximale Werkstückgröße: L x B x H 3 x 1,5 x 2 m Maximales Werkstückgewicht: 500 kg Raumbedarf: mind. 12 x 24 m (Hauptbereich, ohne Fördertechnik in Nebenräumen) Gasbrenner: 2 Stück à 190 kW, 1 x 190 kW, 1 x 250 kW. Tatsächlicher Gesamtverbrauch ca. 300 kW Elektrischer Anschluss: 115 kW installiert / ca. 45 kW im Regelfall Anlagenaufbau: Pos. 1: Manuelles Fördersystem – Stahlbau mit 2 Hebebühnen, 10 Trägern Pos. 2: 2 Chemiekammern mit Sprühvorbehandlung, automatischer Transport Pos. 3: Umkehrosmoseanlage mit Wasserenthärtung Pos. 4: Abwasserbehandlungsanlage Pos. 5: Direkt gasbeheizter Wasser-Trocknungsofen Pos. 6: Pulverkabine mit 2 Nordson XT Applikationseinheiten Pos. 7: Indirekt gasbeheizter Pulverbrennofen Pos. 8: SPS-Steuerungs-Schaltschrank Anlage ist betriebsbereit und wird regelmäßig gewartet. Zukünftiger Service und Support europaweit verfügbar. Das Layout kann auf Wunsch angepasst werden. Eine Teilung der Linie in zwei Einheiten und separater Verkauf ist möglich. Der Abbau der Anlage erfolgt Mitte Juli 2026, eine frühere Lieferung ist nicht möglich. Besichtigung und Vorführung im Betrieb sind möglich. Wir bieten wahlweise nur die Anlagentechnik oder auch schlüsselfertige Umsetzung inklusive Umzug an Ihren Standort und / oder stellvertretende Montageüberwachung.

Būklė: naujas, Gamybos metai: 2026, 🏭 MILTELIO DAŽYMO KABINA KPP Automatinis filtro valymas su reguliuojamu impulso laiku, taip pat rankinis režimas. 🧼⏱️🖲️ 100 % poliesterio filtrai – plaunami, atsparūs vandeniui, ilgaamžiai. 🧵💧♻️ ROMER JET™ filtrų valymas – patentuotas didelio greičio oro impulsas galingam išvalymui. 💥💨🏅 Žemo triukšmo lygio aliumininiai ventiliatoriai (74-79 dB) – saugesnis, kibirkščių išvengiantis veikimas ir mažos energijos sąnaudos. 🔇⚡🛡️ Reguliuojamas oro srauto skydelis – antistatinė plokštė apsaugo filtrus ir pagerina ištrauką. 🌬️🛡️📈 Sandarus filtrų tvirtinimas – tarpinė + apkaba stipriam sandarumui ir patogiam aptarnavimui. 🔩🧷✅ Jutiklinio ekrano valdiklis – automatinis (pagal laiką), automatinis (užsikimšimo jutiklis), rankinis + filtro keitimo įspėjimai. 📲🔁⚠️ Iodpfxsfy T Tbo Abveat Pasirenkamas miltelių konteineris – atliekų surinkimui arba fluidizuota talpa tiesioginiam tiekimui dažymo pistoletui. 🧺💨🎯 Viršutinis traukiklis – juda sijas per kabiną, mažinant rankinį darbą. 🏗️➡️💪 Integruotas sijojimo įrenginys (su konteineriu) – švarūs grąžintini milteliai pakartotiniam naudojimui, EX zonos vibratoriaus sistema. 🧪♻️⚙️ Sprogimui atspari konstrukcija – komponentai parinkti taip, kad būtų išvengta sprogstamųjų mišinių susidarymo. 🛡️💥✅

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Iedpsfz Dubofx Abvoat - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each Iodpefz Apqsfx Abvoat You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Isdpefz Dt Nefx Abveat Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Iajdpfx Aefz I D Dobvet Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Iodpfx Abofz I Edoveat Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) Iasdpfx Abofzkrnovjt It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Iajdpfjflmdwsx Abvst - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators. Iajdpfjfz Nb Tjx Abvjt

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Isdpfjfz U Tiox Abvsat Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: K974.016, Plazminio purškimo įrenginys - Comfort valdymo pultas Iajdoym Ay Eopfx Abvst - Dujų reguliavimo spinta plazmai - Maitinimo šaltinis PPC 2002 NG - JamBox - Miltelių padavėjas PF 2/2 - Plazmos degiklis - Plazminių žarnų ir kabelių rinkinys 9MB - Vandens grįžtamasis aušintuvas Sigma 67-2K su 2 aušinimo grandinėmis atskiram 9MB ir TopGun degiklių naudojimui - Valdymo spinta - TS modemo adapteris

Būklė: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, For sale is a complete, fully operational powder coating system, year of manufacture 1990. In recent years, many of the system components have been modernized or completely replaced and renewed. The system was decommissioned in Q1-2025, but can be put back into operation at any time if required. All system components are on standby and can be started up and demonstrated on-site. The system features one manual and two automatic coating booths (which can be operated simultaneously). All booths can coat parts with maximum dimensions of 7000x2300x800 mm. The entire conveyor technology is supplied by CSF. The control system for all components, including visualization, all control cabinets, frequency converters, and many other parts have been completely renewed over the past 5-7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request! Iaedpfow Ek Ntjx Abvet