Rausch Rs 3 /1000 pirkti naudotą (72 316)

Gamybos metai: 1993, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 3694/895,

Gamybos metai: 1960, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 758, Overhauled Hnsdpfx Asbrcmhsbvel Pulling force: 2 t Lift: 1000 mm

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: 3813, bendras svoris: 600 kg, galia: 7 kW (9,52 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, brošavimo ilgis: 1 000 mm, ruošinio skersmuo (maks.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaching needles) Working area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate dimensions: 255 mm x 400 mm T-slots: 2 pieces, 14 mm wide, parallel/perpendicular to the tool slide clamping surface Accessories/Special equipment: Coolant system Broaching tool safety device Machine cover for work area protection Space requirement: 0.72 m x 1.3 m x 2.67 m (LWH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Υ/Δ 50 Hz Connected load: 12 kVA Max. fuse protection: 25A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching tool holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please direct inquiries by email only. All information provided to the best of our knowledge. Subject to change and errors. This offer is aimed exclusively at entrepreneurs as defined by § 14 BGB. Sale takes place with exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. For further information, please visit the Witzenmann GmbH website under the terms 'Imprint', 'General Terms and Conditions', and 'Data Protection'. Hsdpow Evkiofx Abvjnl

Gamybos metai: 1973, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 5116/447,

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock Hodpfx Ajw H Dgnsbvsnl - The tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.

Būklė: naudotas, Gamybos metai: 1972, Tempimo jėga - maks. 6 t Stūmoklio eiga - maks. 1000 mm Rušinys - maks. 350 mm Stalo dydis 610 x 470 mm Darbo zona 520 x 320 mm Darbo greitis 3 + 5 m/min Grįžimo greitis 10 m/min Įrankio ilgis - maks. 1200 mm Hnsdpfxsyif Nlo Abvel Stalo anga 90 mm Visas reikalingas galingumas 8,2 kW Mašinos svoris apie 1 t Užimama vieta apie 1 x 1 x 1,8 m Mašina tiekiama su priedais, tokiais kaip laikikliai ir brošiavimo adatėlės.

Būklė: paruoštas naudoti (naudotas), Vertical Broaching Machine Rausch Model RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal broaching: Maximum workpiece diameter 600 mm External broaching: Clamping plate area 600 x 340 mm Coolant system Tensile force measuring device Automatic central lubrication Spindle protection with spring band spirals Chip conveyor Shut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Hsdpfx Aodyp Rmsbvonl Collection in person or delivery by freight forwarder. We will gladly help you organize an economical shipping solution. You are welcome to visit for an inspection. You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. The listed company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Machines and tools are sold as-is. The installation and electrical connection of the machine/device must be carried out and/or checked by a qualified specialist. Deviations from the technical data as well as errors in the item description may occur and are subject to change.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, bendras svoris: 400 kg, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 3, with “CE” marking Tensile force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching mandrels “Rausch system” Workpiece diameter: any (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm groove width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided protective enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Safety door with monitoring circuit (emergency stop loop) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (tool removal control to prevent unintentional return of the drawbridge, added safety for operator & tool) - Integrated coolant system - Coolant swivel system (without electric switching function) - Three-sided closed splash guard hood with wide front opening for working area - Extra reinforced chip basket and chip strainer with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking by manufacturer (1995) Remarks: The machine has been overhauled; the machine body has been fully reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system including the coolant/lubricant swivel system is new - New 2-speed SEW gear motor - New electrics (Siemens) - New safety door instead of light curtain Hjdew Huh Nepfx Abvenl - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, strainer, and spindle guard, are new - Stainless steel operator panel with durable labeling - Machine is newly painted with 2-component structural lacquer The machine features “CE” marking by the manufacturer. General: The dual spindle drive ensures a steady and central pulling point as well as constant broaching speed. The machine is primarily designed for the production of keyways up to 18 mm (from 16 mm groove width only with stepped tool shanks). The machine, by design, is quick and easy to set up for broaching with flat broaching tools for keyway production. Due to the universally constructed drawbridge and machine table, both profile and flat broaching tools can be used without additional pullers.

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 60305, General Information / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Hsdpoiqkb Refx Abvonl Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: approx. Ø 900 mm Table bore: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: – Electric jaw monitoring (tool removal control to prevent unintended return of the pull bridge) – Integrated coolant system with check valve and drain tap – Patented coolant/lubricant swing system (retrofit) Note: The machine has the manufacturer's CE marking. The machine is powered in our warehouse and can be inspected.

Būklė: geras (naudotas), Veržlių ištraukimo staklės RAUSCH RS 6-1300 su gausia komplektacija - Stūmoklio eiga / maks. eigos ilgis: 1300 mm Hnjdpfx Abox A Edqjvol - Traukimo jėga: 6000 kg - Darbinė įtampa: 380 Voltų - Įskaitant 38 x įgilintuvus - Įskaitant 95 x kreipiančiąsias įvores - Tarpinės plokštelės - Kranas - Darbo stalas - Platforma - 2 x įrankių spintos Matmenys: Ilgis x Plotis x Aukštis: 1,6 x 1,7 x 2,3 m / Svoris: 2000 kg Galimi netikslumai ar rašybos klaidos.

Gamybos metai: 1978, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Model: RS8/1300 Year of Manufacture: 1978 Pulling Force: 8 tons Stroke: 1,300 mm Weight: 0.92 tons Hnsdpfx Ajfc T E Aebvjl

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 662681751, Manufacturer: Rausch Model: RS6 / 1300 Machine number: 662681751 Year of manufacture: 1992 Power supply: 3-phase (3N~) 380 Volt / 50 Hz Connected load: 7.1 kW Rated current: 17 Amps Weight: 810 kg Circuit diagram number: RS6 – 39 Hedpfefc T Edjx Abvonl With unit Table dimensions: 520 mm x 320 mm

Būklė: geras (naudotas), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (od x id x width): 500x80x203.2 mm Hjdpstrgnzefx Abvsnl Max grinding diameter: 460 mm Tailstock taper: MORSE 4 Workhead taper: MORSE 5 Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Approx. dimensions (length x width): 440x370 cm Approx. weight: 4700 kg

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, bendras svoris: 370 kg, galia: 3,5 kW (4,76 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, brošavimo ilgis: 800 mm, broachavimo greitis: 3 m/min, bendras ilgis: 920 mm, bendras plotis: 800 mm, bendras aukštis: 1 950 mm, Manufacturer: Rausch (Haan/Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370 kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000 kg (30 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 3 m/min Maximum stroke: 800 mm Maximum tool length: 1,000 mm Table size / Working area: 340 mm x 220 mm / 430 mm x 310 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: Unlimited (without splash protection cabin) Dimensions (H x W x D): 1,950 mm x 820 mm x 900 mm (H = table height to floor, without attachments) Motor: 3.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3 m/min & 6 m/min - External stroke adjustment, cross-machine reproducible tool length setting system - Integrated coolant system with check valve and drain cock, as well as selector switch for automatic operation (not automatically switching in swivel mode) - Patented coolant/lubricant swivel system - 3-sided closed, front-open splash guard cabin (without external operator console) - Machine cover below the safety door with chip guard and tool storage area - Electrical cables routed in steel protective conduits - Electrical monitoring of the clamping jaws (tool removal control to prevent unintended return of the drawbridge) - Safety door with integrated emergency stop function - Operating panel made of stainless steel with permanent, durable marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is completely overhauled, the machine body has been fully reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze Hedpfx Asytvyxebvsnl - All bearings and seals have been renewed - Central drive shaft is new - Coolant system (pump, check valve and drain cock) incl. coolant/lubricant swivel system is new - Clamping jaws are new (drawbridge additionally reinforced) - A deactivatable clamping jaw monitoring system has been installed (additional safety for operator & tool breakage prevention) - A safety door with safety monitoring has been installed instead of the rubber interference guard - Tool length adjustment system has been relocated outside the machine enclosure - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Operating panel made of stainless steel with permanent, durable marking - New geared drive motor (SEW) with toothed belt drive - Machine has been freshly painted with 2-component structural paint The machine is in stock and can be inspected under power on our premises.

Būklė: labai geros būklės (naudotas), RS Simulators Thermal Shock Chamber ST2K 1000 / 55 Hnjdpfx Asy H Igfobvol The system was regularly serviced and maintained by the manufacturer until it was taken out of operation. Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Version: Thermal shock chamber Cooling: water-cooled Description Used thermal shock chamber for standard-compliant thermoshock testing. Suitable for material, component and reliability testing. Applications in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover mode for thermal shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Interior (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Horizontal basket movement C-rails in test chamber Large test basket (>1000 mm) Observation window Internal lighting SE-604 control unit Program operation and data recording RS232 interface Cooling System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs. Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery RS Simulators thermal shock chamber ST2K 1000 / 55 Scope of delivery as pictured Service prior to delivery (optional): - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as shown in pictures. Notice Used machine, sale without warranty. Viewing by appointment possible. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Būklė: geras (naudotas), Įrenginys yra geros techninės būklės, išbandymas galimas iš anksto susitarus. Hnodoy Amn Hepfx Abvsl

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 000 kg, 3 ašių suvirinimo sukamasis stalas su hidrauliniu aukščio reguliavimu, keliamoji galia 1000 kg, nuotolinio valdymo pultas Tvirtinimo plokštės skersmuo 900 mm, puikios būklės Greitis, aukštis ir pasvirimo kampas reguliuojami be žingsnių Aukštis su vertikalia plokšte min. 635 mm Aukštis su horizontalia plokšte min. 800 mm Aukštis su vertikalia plokšte maks. 1360 mm Hnjdjylihyepfx Abvjl Aukštis su horizontalia plokšte maks. 1500 mm

Būklė: naujas, keliamoji galia: 1 000 kg, Įranga: kojinis nuotolinio valdymo pultas, 1000 kg keliamoji galia, pilnas komplektas, įskaitant rankinį ir dvigubą pėdinį nuotolinio valdymo pultą (nuo 600 kg iki 10 000 kg galimi variantai) 3 ašių reguliuojamo aukščio suvirinimo sukamasis stalas su 200 mm praeinamuoju gręžiniu Plokštės skersmuo 900 mm su T formos grioveliais, alternatyvai masyvi skylėta plokštė 2000 x 1000 x 200 mm, storis 20 mm, skylės žingsnis 100 mm, skylės skersmuo 28 mm Aukštis horizontalioje padėtyje min. 0,65 m, maks. 1,25 m Aukštis palenktame režime min. 0,45 m, maks. 0,95 m Sukimosi greitis nuo 0,01 iki 1,1 aps./min Posvyrio kampas iki 135° Rankinis ir dvigubas pėdinis valdymas su greičio indikacija Hodpfxox Th A Hj Abvenl Labai tvirta konstrukcija Kaina be priedų, priedai už labai palankią priemoką Stalviršio priemoka 1900 € (tik kartu su pozicionieriumi)

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 000 kg, 1000 kg load capacity complete set incl. hand and dual foot remote control. 3-axis welding turntable, height adjustable with 200 mm through-hole Table diameter 900 mm with T-slots, alternatively available with solid bolted perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 – 1.1 rpm Tilting angle up to 135° Hand and dual foot remote control with speed display Very robust design Price excludes accessories; accessories available at very competitive additional cost. Hnedpfjvllhrsx Abvsl Tabletop surcharge €1,900 (only available in combination with positioner).

Būklė: naujas, 3D skylėtas stalas 2000 x 1000 x 200 mm, tinklelis 100 mm, plokštės storis 22 mm, skylės skersmuo 28 mm. Lygiai apdirbtas, labai masyvus, svoris apie 750 kg. Hodpfx Abevlli Aovonl Su stalo kojomis, tinkančiomis visiems standartiniams 28 mm priedams. Kaina be priedų; papildoma 500 € už pusę pavaizduoto kiekio rinkinį.

Būklė: naujas, Gamybos metai: 2024, 1000 kg load capacity complete set incl. hand and dual foot remote control Height-adjustable welding positioner with 200 mm through-hole Table diameter 900 mm Horizontal height min. 0.65 m, max. 1.25 m Hsdpfor Tr A Usx Abvsnl Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting up to 135° Hand and dual foot remote control with speed display Very robust Chuck available at extra cost depending on type and size

Būklė: paruoštas naudoti (naudotas), Parvex LC310THR0004 servovariklis, SN: 8340, su Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79 impulsiniu koduotuvu, SN: 16078305, naudotas, geros būklės, 100% veikiantis. Komplektacija pagal nuotraukas. Hnodpfx Aboxtwa Eovol

Būklė: paruoštas naudoti (naudotas), Bosch SE-B2.040.060-00.003 Brushless Servo Motor with Heidenhain ROD 426.014 1000 . 222 651 23 ROD encoder, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used, good condition, fully functional Hnsdpfx Asi D Hd Djbvjl

Gamybos metai: 1968, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with "CE" marking Pulling force: 60 kN (6,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Max. stroke: 1000mm Max. tool length: 1200mm Table size / working area: 610x470mm / 520x320mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 1600mm x 850mm x 1000mm (H= height from table to floor, excluding attachments) Motor power: 4.4kW / 5.5kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool rest - Protective cover for stroke adjustment Hedpsv Rmvzofx Abvenl - Oil-tight tray on the control cabinet - Electrical monitoring of clamping jaws (tool removal control to prevent unintended retraction of the pull bridge; additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain - Swiveling coolant supply system, with automatic coolant switching via the swivel system - Chip basket with magnet - Externally adjustable tool length setting system (repeatable across machines) - Stainless steel control panel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive, with manual grease gun Remarks: The machine has been completely overhauled. During the overhaul, the machine base, body, and table have been fully reconditioned. All wear parts have been replaced. The machine has been brought up to the current state of the art and complies with current "CE" regulations. The machine is marked with a "CE" certificate. General: The double spindle drive ensures smooth, central pulling action and constant broaching speed (broaching speed selectable at 3m/min or 6m/min). By design, the machine can be set up quickly and easily for broaching with flat broaches, particularly for keyway cutting. Thanks to the universally designed pull bridge and machine table, both profile and flat broaches can be used without the need for additional pull heads. Broaching tools and mandrels suitable for the machine are available on request.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system Hnsdpsw Ighiofx Abvel - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive Remarks: The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).