Prailginimo staklės - Vidinės - Vertikalios

RAUSCH RS6/1000

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 60305, General Information / Technical Data: Manufacturer: Rausch Model: RS6 / 1000 Year of manufacture: 07/2000 Machine no.: 60305 Weight: approx. 750 kg Pulling force: 60 kN (80 kN) Broaching speed: 4 m/min Return speed: 8 m/min Max. stroke: 1000 mm Maximum tool length: 1200 mm Maximum workpiece diameter: approx. Ø 900 mm Table bore: Ø 90 mm for standard broaching mandrels Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height from floor without attachments) Power supply: 400 Volt / 50 Hz – 6 / 7.5 kW Accessories / Special Equipment: Gijdpfxeiqkb Re Anxsw – Electric jaw monitoring (tool removal control to prevent unintended return of the pull bridge) – Integrated coolant system with check valve and drain tap – Patented coolant/lubricant swing system (retrofit) Note: The machine has the manufacturer's CE marking. The machine is powered in our warehouse and can be inspected.

Būklė: geras (naudotas), Gamybos metai: 1971, mašinos/transporto priemonės numeris: 170119003210A0, Offer 25217 Technical Specifications: - Keyway width: 3 to 36 mm - Maximum keyway length: up to 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 – 0.22 mm - Cutting speed: 2 – 10 m/min - Return speed: 20 m/min - Maximum tensile force: 1.5 t - Maximum workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operator height: 1050 mm - Drive: 400 V / 3 kW - Required floor space: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as pictured Gjdpfx Anowu Suvjxsiw

Gamybos metai: 1973, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 5116/447,

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (equipment): 450 mm Module – max.: 6 Gear width – max.: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – infinitely variable: 130 – 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface – tool spindle: -55 / +300 mm Maximum distance table surface – tool spindle: 200 mm Maximum distance table surface – tool spindle: 350 mm Manual column side shift: +/- 25 mm Manual tool spindle swivel angle: +/- 0.5° Max. tool rotation speed: 15 rpm Max. workpiece rotation speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. line current: 70 A Total power requirement: 48 kW Machine weight: approx. 11 t Space requirement: approx. 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Giodpfxevu E Nuj Anxsw Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 The CNC modular gear shaping machine with shaping cutter is designed for machining external and internal cylindrical gears with straight or helical involute toothing, as well as any other profile obtainable by generating or slotting methods. The working cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 is designed for manufacturing: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Gedpfx Anjuxfupsxoiw Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 3 kg, padavimo ilgis X ašis: 100 mm, padavimo eiga Y ašimi: 100 mm, padavimo ilgis Z ašis: 200 mm, ruošinio skersmuo (maks.): 180 mm, frezavimo ilgis: 200 mm, bendras svoris: 5 000 kg, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 400 aps./min, įrankio skersmuo: 80 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Ši mašina yra visiškai išardoma ir iš naujo surenkama nuo pagrindų. Kapitalinio remonto metu ji iš esmės modernizuojama, naudojant naujausias aukštos kokybės komponentes ir moderniausias technologijas. Po atnaujinimo mašina techniškai ir vizualiai atitinka naujos būklę – patikima, našiai veikianti ir pasirengusi ateities iššūkiams. Gisdpfx Ajx Af A Honxsw Komplektacija ir konfigūracija gali būti pilnai pritaikytos pagal jūsų individualius gamybos poreikius – kad užtikrintų maksimalų produktyvumą jūsų įmonėje.

Būklė: naudotas, Techninės detalės: x eiga: 700 mm Giodpovc Avhsfx Anxsw y eiga: 450 mm z eiga: 450 mm Verpstės kūgis ISO: 40 (SK 40) Stalo tvirtinimo paviršius: 760 x 420 mm Stalo eiga išilgai: 10 - 500 mm/min (greita eiga: 1,4 m/min) Stalo eiga vertikaliai: 5 - 250 mm/min (greita eiga: 1,4 m/min) Verpstės apsukos – be pakopų: 32 – 1600 / 18 pakopų aps./min Verpstės galva pasukama į kairę ir dešinę: 10° į kairę / dešinę Pinolio vertikali eiga: 125 mm Padavimas be pakopų: 10 – 500 / 8 pakopų mm/min Greita eiga: 1,4 m/min Bendras galios poreikis: 6,5 kW Apytikslis mašinos svoris: 3,0 t Apytiksliai matmenys (IxPxA): 2,3 x 2,0 x 1,85 m Kitos savybės: Verpstės galvos nuotolis min./maks.: 2094 / 2544 mm Įranga: -Aplinkai skirta aušinimo skysčio pompa su tiekimu -Linijinė padėties matavimo sistema Heidenhain ND750 Priedai: -Mašininiai spaustuvai

Būklė: labai geros būklės (naudotas), various steady rests Godpfed E Tb Eox Anxoiw

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Centre height: 181 mm Gsdpfjtqf Rzox Anxoiw Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min X-axis Longitudinal travel (infeed spindle): 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: plunge grinding / longitudinal grinding 4 presettable feed rates: mm/min/Ø: 0.01–48 4 presettable infeed amounts: mm: 0.001–0.1 Spark-out during stop grinding: s: 0–99 / 0–99 strokes Jog infeed: mm/Ø: 0.001 Universal swivelling grinding spindle head: 0–180° Grinding wheel (external): D x width x bore: 500 x 100 x 127 or 203.2 mm Grinding wheel (face, optional): D: 250 x 32 x 76.2 mm Grinding wheel (internal, optional): D: (2–250) mm Drive power (external, face): 5.5 kW (7.5 kW) Drive power (internal): 2.2 kW Peripheral speed (external): 35 (50) m/s Grinding wheel wear (external): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Workpiece headstock swivels on rotary part: 0–90° Tailstock: Quill mounting / quill diameter: MK 4 / 750 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40µ Connections: Total connected load: 6.5–10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 litres Pneumatics: 6 bar Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.

Būklė: geras (naudotas), Gamybos metai: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Model: Studer S 30 Year of manufacture: 2000 Machine hour counter Regular maintenance intervals by the manufacturer (last service 11/25, report available) Wheel exchange according to manufacturer schedule Hydraulic system inspection: Annual testing Buffer battery replacement: Included in Studer maintenance CNC control: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 125 mm Centre width: 650 mm Optional grinding cycles (centre height adjustment) Table swivel: 11° Gsdpfjyx Hgzox Anxsiw Glass scale in X / Z axes Paper band filtration system Workpiece headstock: approx. 1–1,000 rpm Internal grinding unit with accessories LED spot lamp with flexible arm Grinding wheel: 400 x 80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Live centre with MK4 Workpiece spindle nose: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300 x 1,550 mm Machine height: approx. 2,000 mm Electrical supply Position measurement system: Digital Coolant supply with filter fleece, tank capacity 300 L Machine hour counter – control ON: 35,978 h