Praplėtimo mašina

Rausch RS 6G

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: Cjdpfxew Ighio Admsrk - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive Remarks: The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> New machines currently available at special conditions for orders placed this year! ==> A fully refurbished used machine is also currently available after overhaul. Please inquire separately for further details. ==> ==> Information for manufacturing companies or dealers with in-house production: If required, the drawings, rights, spare parts, customer and prospect data, as well as planning and manufacturing documentation (including plans for a variant with 9 tons broaching force) for the broaching machine can be purchased from us. Please contact us if interested. ==> Our new machines are custom-built to order. Short-term production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and tool holders from other manufacturers can also be used and fitted to our broaching machine! Complete manufacturing and assembly takes place at our facility in Germany. Short lead times available by arrangement. Furthermore, we also supply spare and wear parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and any other required components – including electrical parts). Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The primary application lies in the production of keyways from 3–28 mm and profiles of similar dimensions. The compact, space-saving design makes the machine perfectly suited for small, medium, and large workshops. The low price makes this machine a sound investment, even for small batch production and single-piece manufacturing. The drive is provided via a pole-changing gearbox brake motor. The maintenance-free double spindle drive ensures smooth operation, a centralized pulling point, and consistent cutting performance. The open tool table design allows large workpieces to be easily positioned. In most cases, workpieces do not need to be firmly clamped. Stroke adjustment is achieved via adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple pieces can be stacked. Broaching needles, mandrels, and spare parts available at competitive terms on request. Technical Data: Pulling Force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min & 6 m/min (optionally: stepless speed adjustment from 0 m/min to 6 m/min possible via advanced electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Crjdpfx Adsuqbnhjmsk Workpiece diameter: unlimited Work table: 450 x 350 mm Table throat: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical system: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 or customized Safety door: standard equipment Coolant system: standard equipment The machine complies with the latest Machinery Directive and bears the CE mark.

Sąlyga: visiškai atnaujintas (naudotas), Pressione: 150 t Crsdpfegd H Tpsx Admok Corsa: 140 mm Dimensioni tavola: 510 x 530 mm

Gamybos metai: 1995, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 18891, Tractive force: 10 tons. Stroke: 1000 mm. 3 ejector stations. With chip conveyor and platform for above-ground installation, including safety door. Credpfx Ajbrcmkjdmsk

Sąlyga: geras (naudotas), Gamybos metai: 2000, Ram stroke – max. 2 – 300 mm Keyway width 2 – 32 mm Drive power 8 kW Strokes per minute 2 – 300 spm Throat depth approx. 300 mm Max. installation height approx. 450 mm Automatic feed 0.01 – 0.15 mm Working speed 0 – 30 m/min Return speed 30 m/min Machine weight approx. 2.2 t Space requirement approx. 2.5 × 1.5 × 2.2 m Crodpsuayibjfx Admok The BALZAT keyseating machine offers the following advantages: - Infinitely variable adjustment of the cutting speed with constant return speed, even during operation - Simple clamping of workpieces using standard clamping tools, no additional tool holders required - Maximum dimensional accuracy thanks to self-centering, centrally positioned tool holders - Feed can be adjusted during program operation - Machine base also serves as a reservoir for cutting oil - All components are easily accessible and replaceable

Sąlyga: labai geros būklės (naudotas),

Gamybos metai: 1969, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 6.223.0085, Tractive force: 10 tons Lift: 1250 mm 3 clearing positions Cjdpfx Adebrcl Ismork Base area: approx. 140 x 120 cm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Arthur Klink RISH 6.3 × 1000 × 400 – Techninės specifikacijos Crjdpfx Adjk S U Hcsmsk Staklių tipas: horizontalioji vidinė dantavimo staklė Gamintojas: Arthur Klink Modelis: RISH 6.3 × 1000 × 400 Pagaminimo metai: 2000 Traukos (dantavimo) jėga: 6,3 tonos (apie 63 kN) Maksimalus dantavimo ilgis (eiga): 1 000 mm Didžiausias ruošinio skersmuo: apie 420 mm Stalo angos (kiaurymės) skersmuo: apie 80 mm Dantavimo greitis: hidrauliškai be laipsnių reguliuojamas nuo 1 m/min iki 7 m/min Atgalinis greitis: hidrauliškai be laipsnių reguliuojamas nuo 7 m/min iki 25 m/min Bendri matmenys (plotis × gylis × aukštis): apie 5 700 × 600 × 1 900 mm Energijos tiekimas: 380 V, 50 Hz, bendra galia apie 4 kW Staklių svoris: apie 2 300 kg Aušinimo ir tepimo sistema: integruota aušinimo/tepimo stotis Alyvos ir drožlių lovio ilgis: apie 2 000 mm

Sąlyga: naudotas, Gamybos metai: 2004, veikimo valandos: 11 022 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07520000211, tekėjimo ilgis: 1 070 mm, sukimosi skersmuo virš skersinio stumduko: 400 mm, tekėjimo skersmuo: 560 mm, ašies variklio galia: 37 W, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 79 mm, X ašies eiga: 485 mm, Y ašies eiga: 160 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: sūkių greitis be galo kintamas, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant treatment system as well as a comprehensive selection of HSK 63-A tools—approx. 40 tools. Furthermore, a Berg chuck is also included, see photos. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Csdpfx Adeug Uc Njmerk

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, Used internal broaching machine Manufacturer: Arthur Klink Model: RISH 10x1000x400 Year of manufacture: 2000 Crjdpfx Aetpmnrjdmok