Pratraukimo staklės

Rausch RS 3/1000

Sąlyga: labai geros būklės (naudotas), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has barely been used. TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Bsdpfx Adeu Hanyewjld Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naudotas, Gamybos metai: 2018, Control system: CELOS / F31iB5 / Mapps 4S Bsdpfx Aoyfh R Hsdwsld Maximum turning diameter: 670 mm Turning length: 1,538 mm Maximum bar capacity: 81 mm X1-axis travel: 675 mm Y-axis travel: mm (not specified) Z1-axis travel: 1,562 + 164 mm B-axis rotation: ° (not specified) A-axis travel: 1,542 mm X2-axis travel: 200 mm Y2-axis travel: + / - 40 mm Z2-axis travel: 1,542 mm Maximum spindle speed: 4,000 rpm Spindle drive power: 26 / 22 kW Spindle bore diameter: 91 mm Maximum counter spindle speed: 5,000 rpm Counter spindle drive power: 22 / 18.5 kW Counter spindle bore diameter: 73 mm Speed range: 0 – 12,000 rpm Milling spindle drive power: 28 / 23 kW Tool holder: Capto C6 Tool magazine capacity: 76 positions Maximum tool diameter: Ø 70 / Ø 130 mm Maximum tool length: 400 mm Maximum tool weight: 8 kg Number of tool holders: 10 positions Shank length for square tools: 20 mm Shank diameter for boring bars: Ø 32 mm Driven tool drive power: 5.5 / 5.5 / 3.7 kW Torque: 16.9 / 13.1 / 8 Nm X-axis rapid traverse: 50 m/min Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 50 m/min A-axis rapid traverse: 36 m/min X2-axis rapid traverse: 25 m/min Y2-axis rapid traverse: 18 m/min Z2-axis rapid traverse: 40 m/min B-axis rotation speed: 100 rpm Hollow clamping device diameter: Ø 67 mm Operating hours: approx. 23,250 h Spindle hours: approx. 8 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Kitagawa hollow chuck on main and sub spindle - Dual foot switch for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: water-soluble coolant - Chip conveyor - Coolant system 70 bar, manufacturer: Hydrajet - Air blow at spindle 1 and spindle 2 - Automatic measuring arm at the main spindle - Workpiece ejector at the spindle - Parts unloader - Preparation for bar feeder - Interface for mist collector - 2 pcs. RotorClear - Signal beacon with 4 colors - Multi-dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, depicted tools, and clamping devices are only included if stated in the additional information. Subject to technical changes, errors, and prior sale!

Sąlyga: naudotas, Gamybos metai: 2017, Pramoninis robotas, mokymo robotas Gamintojas: Kuka Tipas: KR3 R540 KRC4 Compact Metai: 2017/2018 Mažai darbo valandų! Mokymo, parodų, demonstracinė stotelė: 800 mm x 1.000 mm Darbo zona: 541 mm Svoris: 26 kg Keliamoji galia: 3 kg Kuka valdymas KRC4 Compact KUKA.SystemSoftware KSS SR Kuka SmartPad KCP4 Kuka jungiamasis kabelis 4 m Bsdjwpg Ndjpfx Adwold

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 1, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 600 mm, Horizontal surface grinding machine Geibel & Hotz FS 1050 SD Grinding area: 1000 x 600 mm Fine pole spacing on the magnetic chuck Various flanges and grinding wheels Large paper band filter Adjustable leveling feet Wiring & circuit diagram Balancing scale The machine was in use at most 2 days per week – not a production series machine Pricing: ex location – unpacked – uninsured Bljdev U Dfuopfx Adwsd Delivery: immediate – subject to prior sale Errors excepted – technical data not binding

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Bodpfx Adsfxyhfewold Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 400 mm, Įranga: Tipinė plokštelė prieinama, Mitutoyo EURO M 574 koordinatinis matavimo įrenginys labai geros būklės, parduodamas be kompiuterio ir programinės įrangos. Pagaminimo metai: 1999 Be PC!!! X ašis: 500 mm Y ašis: 700 mm Z ašis: 400 mm Skiriamoji geba: 0,0005 mm Matavimo stalo medžiaga: granitas Renishaw MH 20i matavimo galvutė Bsdpfx Aeu E Uzxodwold Granito pagrindo dydis: 850 mm x 1160 mm Ilgio standartas: didelio tikslumo linijinis koduotuvas Centravimo mikroskopas: Mitutoyo CF-10 Fiksavimas ir preciziškas reguliavimas: kiekvienai ašiai - „One-Touch“ oro užraktas, nuolatinis preciziškas reguliavimas per visą ašies eigą. Naudingoji zona: 680 x 1160 mm Rušinio tvirtinimas: sriegis M8 x 1,25 Rušinys: Atstumas tarp kolonų: 720 mm Didžiausias aukštis: 480 mm Didžiausias svoris: 160 kg Be PC Ilgio matavimo neapibrėžtis pagal ISO 10360 E = [3,5 + 4,0L/1000] µm Temperatūros diapazonas: nuo 18 iki 22 °C Įrenginio svoris: 450/540 kg

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 98BE510071, tekėjimo ilgis: 90 mm, veleno greitis (min.): 4 000 aps./min, ašies variklio galia: 11 W, bendras svoris: 6 300 kg, strypo praėjimas: 51 mm, Torretta superiore a 12 posizioni (6 motorizzate) - torretta inferiore a 10 posizioni (5 motorizzate) - contromandrino - 2 assi C - dotato di caricatore di barre LNS Sprint S2 con magazzino frontale, portautensili fissi e motorizzati, manuali - Controllo Fanuc 18T Bledpfx Adewidp Ijwjd

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Bjdpfev U A Izox Adweld Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Manufactured entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control unit: Manufacturer Fatek, HMI from Weintek Electrical connected load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic submersible transducers with dual side sonication - Power: 2,000 W effective / 4,000 W peak – Multi-frequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Sąlyga: naudotas, Gamybos metai: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control: FANUC 31i-B5 Workpiece weight: 2.00 kg Center height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Maximum grinding wheel width: 20 mm Maximum peripheral speed: 125 m/sec Steady rest pass-through: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Bjdpfx Adevx Uvfowsld Camshaft grinding machine for cam components. With FANUC 31i-B5 control for non-circular grinding; loading gantry; CO₂ fire extinguisher system; for CBN grinding wheel; tailstock; steady rest; diamond roll dresser for grinding wheel mounted on the dressing spindle; grinding spindle head variant 12 (two grinding spindles can be moved independently)

Sąlyga: geras (naudotas), Gamybos metai: 2007, 1 naudota CNC įrankių šlifavimo staklė Gamintojas: Schneeberger Modelis: Corvus GDS 650 Bsdpfx Aju A Dn Nedwsld Pagaminimo metai: 2007 CNC valdymas: FANUC 160i Programinė įranga: Quinto 4.3 Aktyvintos programinės įrangos parinktys nr.: 1, 2, 19, 21, 22, 30, 31, 32, 35 -Įrengtas Fanuc pakrovimo robotas -Aušinimo skysčio sistema Darbinės eigos: X ašis: 650 mm Y ašis: 300 mm Z ašis: 300 mm C ašies pasukimo kampas: +150°/-60° C’ ašies pasukimo kampas: +/- 180° Šlifavimo velenas: Disko skersmuo iki 250 mm Apsisukimų dažnis: 0–10'000 aps./min. Maks. veleno galia: 26 kW Tvirtinimas HSK 80 Maks. diskų skaičius: 6 Ruoninys velenas: Maks. kampinis greitis: 180°/s Variklio galia: 1,6 kW Tvirtinimas: ISO 50 Tikslumas (rezoliucija): Linijinių ašių žingsnis: 0,001 mm C ašies žingsnis: 0,001° Matmenys: Ilgis: 3100 mm Plotis: 1915 mm Aukštis: 2190 mm Svoris: 8500 kg U ašis su įmontuotu lunetu, fiksuojamu cilindru ir atatampiu 6 padėklų įkroviklis (skersmuo 3–32 mm) 64 plastikiniai įvorės Techniniai duomenys gali būti netikslūs