Presona Ab Presas Su 8 Kartus Kryžminiu Rišimu pirkti naudotą (52 269)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced Iodpfjvwlqqox Aaustf - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Itodpfxovgrh Us Aaujf Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. Ijdpjv T I Evjfx Aaujtf The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: geras (naudotas), Gamybos metai: 2008, veikimo valandos: 24 629 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 650 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 24 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 1 350 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 10 000 mm, Good day, We hereby offer you, without obligation, a used baling press manufactured by Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Isdpfxoymmmpe Aauetf Effective pump operating hours: 10,090 hours Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Charge box dimensions: 1,650 x 1,100 mm Filling volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only, after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced in July 2026 with a new, larger press. Until then, the machine can be inspected in operation with material input. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: Itjdpfx Aajvn Tg Iousf The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Itodpfxsu Thhro Aausf Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Būklė: beveik kaip naujas (naudotas), Expected stock: approx. 840 pcs. We are offering a second-choice lattice brace from the manufacturer SSI Schäfer for sale here. Technical data for the lattice brace: Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x Lattice brace, second choice Material finish: Sendzimir galvanized Overall length: approx. 1,270.0 mm Iodpsh Eg Agefx Aaujtf Center-to-center hole spacing: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on the delivery location and the scope of delivery.

Būklė: labai geros būklės (naudotas), We are offering a Grade II lattice truss from the manufacturer SSI Schäfer for sale. Technical data for the lattice truss: Shelving system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x lattice truss, Grade II Material finish: Sendzimir galvanized Total length: approx. 1,208.8 mm Center-to-center hole: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be provided upon request depending on the delivery location and scope. Itjdpfx Aoh Eg Ansauef

Būklė: geras (naudotas), We offer here a second-choice lattice girder from the manufacturer SSI Schäfer for sale. Technical data for the lattice girder: Racking system: SSI Schäfer Type: PR 600 Itedpfxeh Eg Acj Aausf Scope of delivery includes: 01x lattice girder, second-choice Material finish: Sendzimir-galvanized Overall length: approx. 1,304.4 mm Center-to-center hole distance: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per piece: approx. 1.38 kg General information about the item: This item is offered for collection only. If transport or shipping is required beyond that, additional costs will apply. These costs can be provided separately upon request, depending on delivery location and scope.

Būklė: labai geros būklės (naudotas), We are offering a second-choice lattice strut from SSI Schäfer for sale. Technical data for the lattice strut: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice strut, second-choice Material finish: Sendzimir galvanized Total length: approx. 1,249.2 mm Center-to-center hole distance: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Itsdpfxeh Eg Ake Aauof General information about the item: This item is only available for collection. Should you require delivery or shipping of this item, additional costs will apply. These can be quoted separately depending on delivery location and scope of delivery.

Būklė: naujas, Gamybos metai: 2024, Attention – Special offer!! First warranty inspection completely free of charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are available FROM STOCK. Hydraulic press brake “PBO-4124-PRO DA-66T” Technical specifications - Nominal pressing force: 2,400 kN - Motor power: 22 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14,000 kg - Oil reservoir: 210 l - Maximum length of bent sheet: 4,100 mm - Distance between uprights: 4,100 mm - Working beam length: 3,550 mm - Table height: 1,610 mm - Maximum opening height: 530 mm - Maximum stroke of the moving beam: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Automatic, servo-driven backgauge on linear guides: 2 pcs - Front supports: 2 pcs - Backgauge position adjustment (X-axis): electric motor - Beam adjustment (Y-axis): independent control of axes Y1 and Y2 via servo drives - Punch clamping type: quick AMADA-type clamping system Controller “Delem DA-66T” - Graphical programming module with 2D and 3D touchscreen - 3D visualization for simulation and editing - High-resolution 17-inch color TFT screen - Complete Windows-based operating system - Compatible with “Delem Modusys” system (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending using sensors, including a parameter correction menu - Offline Profile-T3D software High-quality components - German brand Rexroth hydraulic valve - Electrical system components from Schneider - Safety circuit elements from Omron and Schneider Specialist assistance We ensure we maintain regular contact with our customers. For this reason, each machine sold includes a service hours package for the assistance of an Otinus specialist. As part of the service, our technician can: - Define bending steps for complex workpieces, - Advise on material and tool selection - Assist in selecting operating parameters for various materials. Transport We offer free loading of purchased machines and support with transport arrangements. The following services are included in the machine price: A 3-day training and machine installation - First day up to 8 hours: Installation and training for the control unit. Isdpovwmkfefx Aauotf - Second day up to 8 hours: Independent operation of the machine under supervision of our technician → Possibility to program specific parts as required by the customer. Telephone consultation with an Otinus specialist From 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of cooperation - 24-month warranty period. - The machine is brand-new. - Warranty and post-warranty service from the seller. - The customer is responsible for the machine once it is unloaded and moved on their company premises.

Būklė: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to find out more! The offer refers to the standard version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-3117-CNC Delem DA-69T Technical Specifications: - Rated pressing force: 1750 kN - Maximum bending length: 3100 mm - Throat depth (distance between tooling and rear frame): 510 mm - Maximum stroke of bending beam: 410 mm - Maximum open height: 615 mm - Distance between frames: 2600 mm - Maximum backgauge distance: 600 mm - Motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10,300 kg Tooling/Accessories: - Automatic backgauges on linear guides, servo-driven: 2 pcs - Front support arms: 2 pcs - Backgauge distance adjustment (X-axis): Servo drive - Beam adjustment (Y-axis): Independent servo-driven Y1 and Y2 axes control - Punch clamping system: Amada-type quick-release Delem DA-69T Control - Touchscreen for 2D and 3D graphic programming - 3D visualization for simulation and process control - High-resolution 17-inch TFT color display - Full Windows operating system - Compatibility with Delem Modusys system (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending support with sensors in the parameter setup menu - Offline Profile-T3D software Professional Support We ensure that we stay in constant contact with our customers. That’s why, when purchasing a machine, we include a support hours package from Otinus technical specialists. Ijdpfsrp Dwasx Aauetf Come and test our machines Take part in a professional demonstration led by a qualified Otinus technician, covering the complete functionality of the machine. You are welcome to bring your own technical drawings and sample materials. Manufactured in Turkey Machine delivery includes: A 2-day operator training and commissioning session - Day 1 (up to 8 hours): Commissioning and control system training. - Day 2 (up to 8 hours): Independent operation under supervision of our technician – with the option to program specific components. Telephone support by a specialist - From 7:30 to 21:00 (Mon–Sat) – An 8-hour package to be used within 12 months. Free rental of transport rollers and two hydraulic jacks to facilitate machine positioning at the customer’s site. Rollers and jacks are delivered upon prior request (minimum 7 days before machine delivery). Terms of cooperation: - 24-month warranty period - Delivery time: approx. 1–2 weeks; does not apply if the machine is marked as available from stock - The machine is brand new - Seller-provided warranty and post-warranty service - The customer is responsible for the machine during unloading and on-site transport.

Būklė: naudotas, Techniniai duomenys: Klijuojamo elemento maks. matmenys: 1600 x 3000 mm 3 vertikalūs spaustuvai 2 horizontalūs spaustuvai Hidrauliniai spaustuvai Maitinimas: 400 V Variklio galia: 1,5 kW Variklio apsukos: 1450 aps./min Ijdpfxsyv Atre Aauetf Bendri išmatavimai: Ilgis: 1200 mm Plotis: 3500 mm Aukštis: 2500 mm

Būklė: naudotas, bendras plotis: 1 300 mm, bendras aukštis: 3 850 mm, bendras ilgis: 2 200 mm, Kaina: pagal užklausą - Pagaminimo metai: 8 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra Itedpfx Aaeym Uxteusf - Serijos numeris: 307 - Transportavimo matmenys: 2200 mm x 1300 mm x 3850 mm (ilgis x plotis x aukštis) - Transportavimo paketai [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Maržos apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas į dalinį atsiskaitymą visada įmanoma visai pramonės įrangai Yorick Diebels

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M08E/7120, Pasiūlymo numeris: M08E/7120 Mašinos tipas: 8 matricos – 8 smūgių presas Informacija: uždaras peilis Gamintojas: LACHAUSSEE Iodpfxewi Tapj Aaujtf Modelis: Fo 10 - 712 Pagaminimo metai: 1984 Skersmens diapazonas: 6,5 mm Matricų skaičius: 8 Pakopų skaičius: 9 Ruošinio ilgis: 6-10 mm Stūmos eiga: 123 mm Galingumas - vnt./min: 150 Vieta: Europoje

Būklė: naujas, Gamybos metai: 2024, Are you looking for a high-performance press brake that can handle even the most demanding requirements? Then the Durma AD-S 803000 press brake with a pressing force of 3,000 tons could be the perfect solution for your needs. With an impressive bending length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1,000 mm allows for flexible and convenient positioning of the workpiece. At the heart of the machine is the movable DELEM DA-66T control unit, which ensures intuitive operation and precise management of the work process. Additionally, this press brake is a special custom-made model and can be configured to meet all individual customer requirements. If you're interested in the Durma press brake, we are happy to provide you with a personal consultation. Other machines are also available and can be viewed upon request. Please feel free to contact us for further information and let us find a tailor-made solution for your requirements together. Control Type: DELEM DA-66T Protective Oil: Suitable for sea transport Front Safety System: FPSC (Manual) Sheet Support Systems: Movable support arms Stroke: 750 mm Backgauge Type: X=1500 X, R Throat Depth: 1,050 mm Crowning: Hydromechanical Installation Height: 1,000 mm Power Supply: 400V 50Hz Frame Type: Welded frame construction Iodpfoi Da Syex Aauotf Bottom Tool Holder: DURMA wide

Gamybos metai: 2026, būklė: naujas, Vakuuminė membraninė presas VPR-4000 yra universali presas, skirta medienos apdirbimui ir termoformavimui. VPR-4000 presas taip pat yra pasukamas ir mobilus. Naudojimo sritys: Faneravimas / formų klijavimas / apvyniojimas... Įvairių profilių padengimas (fanera, popierius, plastikas...) Medienos lankstymas: lenktų ir sluoksniuotų elementų gamyba Vakuuminė sistema: darbinis paviršius su vakuumo kanalais užtikrina tolygų slėgio sumažinimą net ir dideliems ruošiniams. Becker vakuuminis siurblys / be alyvos / bako tūris 100 l Iodpfxoyr R Hwo Aaustf Darbinio paviršiaus matmenys: 4000 x 1500 mm Variklio galia: 0,75 kW Vakuuminio siurblio našumas: 40 m3/h Kaučiukinė membrana Išoriniai matmenys: 4100 x 1650 x 1000 mm Svoris: 400 kg Vieta: iš sandėlio 54634 Bitburg - laisvai pakraunama -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Italpresse SP 30-8 Case Clamp Year of manufacture: 1997 S/N: 978612997 Working length: approx. 3000 mm Working width: 600 mm Working height min-max: 450 – 1250 mm 12 supports Itodpfxehwwnre Aausf 8 pneumatic pressure cylinders Dimensions (L x W x H): 3.5 m x 0.8 m x 2.24 m Weight: 1150 kg Technical information subject to change

Būklė: naudotas, Hydropneumatic operation Max. punching height: 90 mm Back gauge stroke: 100 mm Punching stroke: 20 mm Isdpfx Aaow Inudsuotf Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Būklė: naudotas, mašinos/transporto priemonės numeris: 65333, Įranga: Tipinė plokštelė prieinama, Apvali automatinė vijimo mašina Nr. 171, ritinių vyniojimo mašina Blume & Redecker, 8 stotys, dvigubas skrajutė, didžiausias vielos storis 2 x 1 mm. Nr. 170 ritinių vyniojimo mašina Blume & Redecker, 8 stotys, viengubas skrajutė, didžiausias vielos storis 1,4 mm. Iodpfx Aasylx Tleujtf

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 8 900 h, mašinos/transporto priemonės numeris: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum volume output under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7-9 t/h - 50 kg/m³ = 8-9 t/h - 100 kg/m³ = 11-14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Charging chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs. - Pressing force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank capacity: 600 l - Electric motor power 400 V, 50 Hz: 1 × 45 kW - Oil cooler: 1 × 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: chain conveyor - Year of manufacture: 2014 - Specifications: Itedpsyrhi Nefx Aauof - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Press, control cabinet, operator panel, conveyor belt for sale. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We do not accept any liability for technical information or possible errors. Video material can be provided upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, spaudimo jėga: 160 t, stalo ilgis: 3 500 mm, bendras ilgis: 4 650 mm, bendras plotis: 1 650 mm, bendras aukštis: 2 550 mm, bendras svoris: 6 000 kg, darbinė temperatūra: 130 °C, atidarimo plotis: 480 mm, plokštės plotis: 1 300 mm, temperatūra: 130 °C, Įranga: karštas vanduo, ORMA Shelf Press NPL-8-160 Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPL-8-160 • Shelf dimensions: 350 x 130 cm • Max clearance between shelves: 480 mm • Shelves are flat, clean, without dents/damage • 8 pistons with 85 mm diameter • Max pressure: 350 bar • Max pressing force: 160 tons • Option to operate using only the central pistons (for short workpieces) • Automatic pressure compensation • Glueing timer with automatic shelf lowering • Shelves suitable for water/glycol or oil heating • Circulation pump and heating boiler included • Max heating medium temperature: 130°C Isdpfxoxdxwaj Aauetf • Equipped with a safety cable (emergency stop system) • Original paintwork, all parts original • Weight ~ 6000 kg • Year of manufacture: 1991 • Overall dimensions: 465 x 165 x 225/255 cm (L x W x H / H with expansion tank) Additional information: • Perfect, factory technical condition • The presented photos reflect the actual item for sale • Possibility to power up and inspect the machine on site

Būklė: naudotas, CNC press brake AMADA model HFBO 50 x 2000 Serial no. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes – CNC control Operateur II Pressing force: 50 tons Isdpfx Aasw Iq Ugeuetf Working length: 2090 mm Stroke: 200 mm Throat depth: 420 mm Distance between side frames: 1660 mm Maximum tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operateur II, Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric footswitch and/or two-hand control panel - Mechanical lever-type tool clamping for the top tool (5 pcs AMADA Expert, 5 pcs UKB 50.667 H=120 mm) - Tool holder for the bottom tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - comprising: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - 2-piece lower tool, 88° - V 8, total length 1250 mm - comprising: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Būklė: naudotas, Gamybos metai: 1992, Temperature controller, temperature control unit, modular temperature control system, tool heating - Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones - Type: RSD II 8 Isdpfjudqb Ajx Aauotf - Max power: 28 kW - Transport dimensions: 490/430/H460 mm - Weight: 30 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, alyvos bako talpa: 3 100 l, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data - Baler: Itsdpfxox Dnb Uo Aaujf Manufacturer: MACPRESSE EUROPA S.R.L. Type: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours as of December 2025 Main press force: 200 t Specific pressing force: 16.5 kg/cm² Feed chute dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length adjustable Drive power: 2 x 75 kW Binding: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank capacity: 3,100 L Machine weight, press: approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic schematic Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank completely drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, complete disassembly, overhaul of the mechanics • Replacement of the front two main guide rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, all seals replaced • Replacement of the counter knife in the frame • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame renewed on left and right sides • Worn press floor cut out, bottom plate replaced with wear-resistant HARDOX steel • Dismantling of the tying and twisting unit, complete disassembly, overhaul of the mechanics, replacement of all twister shafts and ball bearings • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and reset, chains lubricated and tensioned • All wire deflection pulleys made operational • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in both manual and automatic modes—see our video for a functional test of the machine. The documentation (operator manual, CE, electrical/hydraulic schematic) is complete. Viewing by appointment is possible. No liability is assumed for the technical specifications or possible errors.