200 t balų presas su horizontaliu rišimu

MACPRESSE EUROPA S.R.L. 112

Sąlyga: naudotas, Gamybos metai: 2003, Technical Details: Pressure: 40 t Box opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with feed unit/conveyor belt LxW: 4500x1000 mm, motor-driven with automatic 3-fold tying unit Bale counter/indicator Press chamber LxWxH: 1800x800x800 mm with 1.2 m³ volume Kdodpfx Asu Nw Ezjf Ieg Bale size LxWxH: 300–1500 x 800x800 mm Bale weight: 250 – 450 kg depending on material and bale length Filling opening LxW: 1200x730 mm, filling height 1200 mm Hopper size LxWxH: 1200x1200x1400 mm; filling height 2500 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Kdsdpfx Aovwlqqef Iog Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Kodpfxjh Nyfyj Af Ijdg Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. For further information, please contact: +48 539 660 495.

Sąlyga: naudotas, Gamybos metai: 1988, veikimo valandos: 1 h, mašinos/transporto priemonės numeris: V 516, bendras plotis: 2 000 mm, bendras ilgis: 7 000 mm, bendras aukštis: 1 800 mm, darbinis slėgis: 300 juosta, spaudimo jėga: 90 t, aliuminio lakšto storis (maks.): 5 mm, galia: 11 kW (14,96 AG), tuščias svoris: 16 000 kg, pjovimo jėga: 90 t, paskutinio kapitalinio remonto metai: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Footprint: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30/01/2026 Ksdslhqd Repfx Af Iedg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. Kdjdpovgrh Ujfx Af Ieg We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into a bale weighing up to 200 kg. Different materials can be collected in two or more press chambers arranged side by side. Once a chamber is filled, the mobile press head is rolled over and the material is compressed. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling cycle. Pressing force: 16 tons Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1,400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for removing the bales Return retainers to minimize material spring-back Short handling time as one chamber is always free for loading Holder for strapping bands A quality product “Made in Europe” Kdjdpfovugz Eox Af Isg Suitable for compacting: Cardboard Films Big bags Textiles Light recyclables Additional options: Annual maintenance with UVV inspection Machine color according to RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chamber (up to 6 chambers total) Strapping bands Power supply 380 - 400 V (3 phases) Twin-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste press

Gamybos metai: 2008, Sąlyga: naudotas, Naudojimas: Krovinių pervežimas Tinkama naudoti: Mašinoms pakrovimui ir iškrovimui Norėdami gauti daugiau informacijos, susisiekite su ATS Norway. Prašome užklausai nurodyti nuorodos numerį: 20081 Specifikacijos: Kodpfsw Ia Ngex Af Iodg • Gamybos metai: 2008 • Svoris: 750 kg • Hidraulinė siurblys • Ilgis: 12 metrų • Paruošta pristatymui Aprašymas: Palfinger PK 14080 C kranas, pagamintas 2008 m., su hidrauline siurbliu. Kranas buvo kapitališkai suremontuotas, kai savininkas jį įsigijo. Paruoštas pristatymui. Savaiminis svoris: 750 Modelis: PK 14080 C kranas su hidrauline siurbliu

Gamybos metai: 2003, veikimo valandos: 43 000 h, Sąlyga: reikia remonto (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en -transportband: Bollegraaf HBC140s Balenpers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Uitsluitend Hardox bodemplaat Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze balenpers kan ook volledig gereviseerd worden verkocht, conform de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene uitgangspunten revisie Reiniging & demontage Voor de daadwerkelijke revisie wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Aandrijfram, • Frame, • Kanaal, • Voorpersklep Na demontage en inspectie wordt de ram opnieuw opgelast en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden uitgedeukt en waar nodig gerepareerd. Overschilderd Na het meten van de toleranties en het uitvoeren van eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen & slangen worden vervangen. De hydraulische componenten worden opnieuw afgedicht. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle lasdozen worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van de beide naaldeninstallaties en knopers worden vernieuwd. Cilinders: Kdodpfx Ajkcgynjf Isg De cilinders worden opnieuw afgedicht en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Sąlyga: naudotas, Adhesive application Glue application Adhesive spreading - Glue application for package heights up to 300mm using 1 application roller - Driven by a 0.37 kW worm gear motor Kdsdpfxecht Nyj Af Iog - 1 piece left - 1 piece right - Suitable for DIMTER HK 200 and HK 400 DIMTER spare parts DIMTER accessories

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 2 632 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 29.381, spaudimo jėga: 35 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, bendras plotis: 2 380 mm, bendras aukštis: 2 500 mm, bendras ilgis: 6 625 mm, Įskaitant padavimo juostą. Mašina iš karto paruošta darbui. Kjdpovaw T Aofx Af Iedg