Mütek Systemtechnik Mpp Nem 900 pirkti naudotą (5 935)

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Ljdpfjgfm Ryex Akvjhh Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Lhedjgl Nlmspfx Akvsh Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Ledpfx Akoffh Atevshh Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Lhjdpfx Akjchqxxevsh Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net Ljdpfx Aksd N Dnhjvshh The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: Lhsdpfjchuvrox Akveh + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą. Ledov Rpxlepfx Akvohh

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Lhsdsrb D Nepfx Akveh Fan 2.2 kW Airflow 1850 m³/h / 400 V

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Lhedpfx Asdwktkokvjh Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Lhedpfx Ajgmfa Askveh Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Lhedpfx Aksd Nm Sievsh Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality *depending on material. The large-sized press cylinder and the 80 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and the hydraulic oil (recommended if the press is to run regularly for longer than approx. 3.5 hours without interruption) Briquette diameter: 80 mm Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Capacity (material dependent): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Lhsdexfwdepfx Akveh Motor power: 9.2 kW 400 Volts / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Option: cooling for press tongs – yes, with special accessory "coolable press tongs" Option: hydraulic oil cooling – yes Cooling of press tongs and hydraulic oil with cooling unit (special accessory) Option: fill level monitoring – yes Option: continuous briquette – yes (material-dependent) Option: enlarged feed slide – yes, with special accessory "enlarged feed slide" CE compliant . Raw material requirements: - The moisture content (absolutely dry) must be at least 6% and no more than 18% - Maximum chip length: 20 mm - Installation temperature: temperature-controlled room, at least +5°C - Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation Lhodpfx Akjd Su Hxevjh *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: naudotas, Džiovykla su dujiniu šildymu ir plienine juosta. Įrenginio ilgis: 8 metrai. Lhodpfx Asxu U S Uokvjh

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Aprašymas bus pateiktas vėliau Ljdpfx Aexzk Ncokvjhh

Būklė: geras (naudotas), For sale: CRATHERN, PERONDI IA630, and NA 900. Lhedoud Axgjpfx Akvjh

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6582 Ljdpfezcmqtsx Akvehh TECHNINIAI DUOMENYS - maks. apdirbamo ruošinio plotis: 920 mm - maks. apdirbamo ruošinio aukštis: 150 mm 2 agregatai: 1) guminis, rifliuotas kalibravimo volas 11 kW 2) guminis, rifliuotas kalibravimo volas + juostos nupūtimas 7,5 kW Iš viršaus: - 2 guminiai slystantys volai - agregatas - 2 guminiai slystantys volai - agregatas - 2 guminiai slystantys volai Iš apačios: - 3 guminiai slystantys volai - traukimo juosta - pneumatine juostos osciliacija - elektrinis stalo pakėlimas - tolydus padavimo greičio reguliavimas - darbinis slėgis 8-10 bar - pneumatinis stabdis - ištraukimo antgalio diametras 2x160 mm - bendri matmenys (ilgis/plotis/aukštis): 1600x1460x2000 mm - svoris apie 1305 kg – vokiška gamyba – 2 agregatai – naudota šlifavimo mašina, labai gera buklė Neto kaina: 27 900 PLN Neto kaina: 6 640 EUR Neto kaina apskaičiuota pagal kursą 4,2 PLN/EUR (esant didesniems kurso svyravimams, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Katalogo numeris: 7649 TECHNINIAI DUOMENYS Įleidimo plotis: 900 mm Įleidimo aukštis: 300 mm Veleno plotis: 1030 mm Veleno skersmuo: 700 mm Peilio ilgis: 1030 mm Peilių kiekis: 3 vnt Sieto matmenys: 70x70 mm Apačioje – 2 dantyti traukos velenai Apatinio veleno variklis: 7,5 kW Viršuje – 2 dantyti traukos velenai Viršutinio veleno variklis: 7,5 kW Juostinis padaviklis Redlerio transporteris su grandinine juosta 5600 mm + 10600 mm, 2,2 kW Padavimo juostos plotis: 800 mm Pagrindinis variklis: 90 kW Atbulinė eiga Bendri mašinos matmenys ilgis/plotis/aukštis: 3300x3100x1700 mm Bazinės dalies matmenys kapotuvui: 3300x2080x1940 mm Padaviklio/redlerio matmenys ilgis/plotis/aukštis: 5600x900x1000 mm + 10600x1050x1600 mm Bazinės dalies matmenys padavimo juostai: 5100x1300x2520 mm Bendras svoris apie: 16000 kg PRIVALUMAI – Pagaminta Vokietijoje – Grandininis redlerio transporteris su gremžtukais – Atbulinė eiga – DTR techninė dokumentacija Lhedpfx Akszcby Nsvsh – Naudota smulkintuvo būklė labai gera Grynasis kaina: 219900 PLN Grynasis kaina: 52350 EUR pagal 4,2 EUR kursą (Kainos gali kisti priklausomai nuo valiutos svyravimų)

Būklė: geras (naudotas), Gamybos metai: 2010, konvejerio juostos ilgis: 900 mm, konvejerio juostos plotis: 1 300 mm, Ilgis: 900 mm Plotis: 1300 mm Yra du vienetai Kaina už vienetą: 500 EUR Lodpjzd T Iaofx Akvohh

Gamybos metai: 2015, būklė: beveik kaip naujas (naudotas), Kombipakker i rustfrit stål Multipack Producent: Sema Systemtechnik Maskinemodel: 1400s-FN-TPW Lhjdpfxjh Hq U Us Akvjh Produktionsår: 09/2015 Fuldstændig udført i rustfrit stål Maskinen har ikke været i brug længe – fremstår næsten som ny!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras aukštis: 1 660 mm, Gamybos metai: 2025, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, Laser for Product Marking – The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, laser marking has become indispensable for permanent identification. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber Laser 20W (Optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (Optional: 200x200mm) Ljdpfowkpwajx Akvehh • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Tower signal light to display operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profiles • 230V power connection • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, bendras ilgis: 900 mm, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, kartojimo tikslumas: 0,01 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, Įranga: USB jungtis, apšvietimas, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a broad range of marking applications. With its integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software once previously set. In addition, the software can read data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with a Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side-mounted arms for long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Lodpjyxccrjfx Akvehh Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for operating status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions approx. 900 x 800 x 1900 mm (LxWxH) • Weight approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 350 mm, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 70 mm, nuskaitymo srities plotis: 70 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The mobile LAS 23 portable laser stands out for its compact design. Small, handy, and equipped with custom attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base, it can be moved directly to the workpieces to be marked. This makes it suitable for both large and heavy, as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setup. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Lhedpfxju Smcbo Akvoh Made in Germany • Fiber laser, 20W (optional: 30 Watt, 50 Watt) • Laser Class 1 • CE compliant, according to EU directives • Wavelength: 1064nm • Marking area: 70x70mm (optional: 110x110mm) • Signal light to indicate operating status (on the hand unit) • Marking software: EZCAD • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (hand unit): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For durable markings, the use of lasers has become indispensable in many industries. The powerful laser software allows text, numbers, 2D codes, QR codes, and logos to be created easily and with just a few clicks, without advanced programming skills. Serial and article numbers can be incremented automatically after configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for long parts, movable Z-axis, drawer systems, etc., are also available. Furthermore, programmable, software-controlled axes (X, Y, Z axes) and database connectivity are possible. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software: EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic determination of focal distance • Optional: programmable X, Y, and Z axis (software controlled) • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for operating status indication • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made from aluminum profile • Air-cooled • Door width: approx. 700 mm / door pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Lhodpfewkpvvex Akveh • Weight: approx. 120 kg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 560 kg, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, bendras aukštis: 1 550 mm, suslėgto oro jungtis: 6 juosta, pozicionavimo tikslumas: 0,01 mm, kartojimo tikslumas: 0,01 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, Pusiau automatinis plokščių atskyrimas / pagrindinė mašina su lygiagrečiu šatluzu Dinaminis LOW 4322 plokščių atskyrimo įrenginys ypač tinka vidutiniams ir dideliems gamybos kiekiams, atitinka augančius gamybos proceso reikalavimus. Skirtingų medžiagų surinktinės plokštės atskiriamos naudojant dulkėms ir įtampoms nejautrias pjovimo bei frezavimo technologijas, užtikrinančias aukščiausią lankstumą, tikslumą ir našumą. Aukšto dinamiškumo linijiniai motoriniai ašys, įrankiai ir griebtuvai atitinka aukščiausius kokybės reikalavimus, garantuoja ilgą tarnavimo laiką ir patikimumą. Pagaminta Vokietijoje Pusiau automatinis atskyrimas – sprendimai pagal poreikį LOW 4322 plokščių atskyriklis leidžia greitai keisti gaminius išlaikant trumpus atskyrimo ir apdorojimo laikus. Plokštės įvedimas vyksta su lygiagrečiu šatluzu, o paėmimas ir fiksavimas – su kaištinių fiksavimo technologija, prireikus kartu su vakuuminiais siurbtukais. Šis įrenginys komplektuojamas su: • Veleniniu ir diskinio įrankio atskyrimo moduliu Z ašyje (automatiškai pasukamas 0-90°) • X-Y kryžminių siūlių moduliu su linijinio variklio technologija ir didelės raiškos matavimo sistema • Dvigubu pakrovimo moduliu, įrengtu kaip lygiagretus šatlu, su atskirais kairės ir dešinės pusės stumdomaisiais durimis • Aliuminio profilio rėmu su dviem priežiūros durimis – kairėje ir dešinėje. • Standartinės vizijos sistemos pagrindiniu moduliu mokymo-programavimo režimui (kameros plotas 400 x 330 mm) • Darbo zona 420 x 330 mm • Automatinis frezo ilgio apdorojimas (tik kartu su veleniniu atskyrimo moduliu) • Nuotolinė priežiūra/palaikymas per nuotolinį ryšį (TeamViewer) arba kliento teikiamą sąsają • Jutiklinis IPC su Windows operacine sistema • Lazerinė ašių matavimo sistema su protokolu Lodpfxext Dmxe Akvohh • Oro jonizacija • Frezos lūžio kontrolė tik veleniniams frezoms • Paruošimas vakuuminio tvirtinimo technologijai • ESD apsauginis skydas ir stumdomos durys Papildomai gali būti pasiūlytas dulkių siurblio įrenginys. Aukštas našumo lygis, kurį suteikia standartiniai pjovimo ar frezavimo moduliai, visiškai automatinė frezo ilgio apdorojimo funkcija, vaizdo pagalbinis mokymo kameros sistema ir dvi paprastai keičiamo surinktinės plokštės laikikliai, gali būti išplėstas atsižvelgiant į kliento poreikius ir papildomą įrangą (pvz., kamera-vizija sistema). Preciziškas lazerinis ašies matavimas prieš paleidimą yra neatsiejama individualaus klientų aptarnavimo dalis visose „Systemtechnik Hölzer“ tiek inline, tiek atskirose plokščių atskyrimo sistemose.