Jutec Biegesysteme Gmbh & Co. Kg Biegesystem 6000 Sb/D pirkti naudotą (115 043)

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room Ksdpfx Ajng Ax Ssb Nedp • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, slėgis (maks.): 250 juosta, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right-hand or left-hand bending. The plug-in bending tools allow for rapid changeover to different tube sizes. A rapid-action hydraulic system for reducing ancillary times is a key factor in series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In "Simple Bending" mode, the length and rotation of the bends relative to each other are automatically displayed. In "Controlled Bending" mode, the data is pre-set and a permanent actual/target comparison is carried out during the bending process. This eliminates mispositioning within a tolerance window, thereby minimizing operator-induced error rates. General error messages are shown in full text on the large display. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very large tube feed, and is also available in a stationary version with a tool and mandrel rod organization system. The cost-effective alternative to fully-controlled CNC machines. POSSIBLE APPLICATION AREAS: • Hydraulics piping • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototyping Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer) • Maximum bending result: 180º • Weight 800–900 kg (depending on configuration) Kdodpfx Absng Exaj Nop • Ergonomic operation via safety footswitch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic brake function or manual stops via footswitch • Automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Advisory and consultation meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, lenkimo spindulys (min.): 9 mm, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm Kodpfx Abendn Ags Njdp • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. Kdedpfenh R Eksx Ab Nop TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 35 mm, Vamzdžio sienelės storis (maks.): 2 mm, Lenkimo kampas (maks.): 360 °, lenkimo spindulys (maks.): 150 mm, lenkimo spindulys (min.): 32 mm, bendras svoris: 28 kg, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. Kedpfonfvx Nex Ab Nedp For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping Ksdpfx Aendk N Asb Nodp • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 1018, valdymo tipas: PLC valdomas, automatizacijos lygis: vadovas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 50 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: Ksdpfxjnfvy Ue Ab Nsdp • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: Kdjdpfong Amkjx Ab Njp • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: Kedpfx Ajng A R Sob Nedp • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 8 mm, Lenkimo kampas (maks.): 195 °, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube diameters from 15 - 100 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be reliably achieved in series production. With a tool height of 120 mm, ample options for special profiles are available as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid construction of the mandrel carrier and bending arm, all contribute to the desired bending results. The plug-in bending tools allow for quick changeover to other tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (easily expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited numbers of programs for bending angles, length dimensions, and rotational angles for up to 50 bending sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In 'Simple Bending', the lengths and angles of the bends are automatically displayed in relation to each other. In 'Controlled Bending', the data is preset and during the bending process a continuous actual/target comparison is performed. Also available with pneumatic rotary stop or with gear-assisted length and rotational positioning. POTENTIAL APPLICATIONS: • Plant construction, e.g. chemicals • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Max. 180º bend angle achievable • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chucks • Larger bending radius up to 300 mm • Length and angle positioning via automatic braking system or manual stops with foot switch • Semi-automatic length and angle positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome at our in-house demo room Kdsdpfxsnh R Suo Ab Njp • Consultation and information onsite at your facility • Consultation and processing for leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Gamybos metai: 2022, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3352, RAMPF dozavimo įrenginys su MS-S maišymo sistema (statinė) Naudota medžiaga: Rampf RAKU PUR 21-2080-1 Komponentas A ir Komponentas B Dozavimo galvutė papildyta Y-vežimo slankikliu. - Rankinis maišymo sistemos perstūmimo įtaisas - RAMPF maišymo sistema MS-S (statinė) - Slėgio kontrolė A + B komponentams - Medžiagos slėginis bakas 50 l A komponentui - Lygio kontrolė A ir B komponentams - Medžiagos recirkuliacija iki dozavimo siurblio A ir B komponentams - Medžiagos evakuacija A komponentui - Vakuuminis siurblys 25 m³/h - Atliekų bakas 60 l su vamzdžiu -> Surinkimo padėklai pakeisti į mobilius padėklus. - Vežimėlis atliekų arba plovimo bakui - Trigubas talpyklų/mašinos rėmas - Darbo stalas apie 1.400 mm x 500 mm su stalviršiu Kdsdpfjzgck Nsx Ab Nep - Perdavimo stotis dangtiniam A komponento bakui - Perdavimo stotis su bung tipo B komponento bakui - Dozavimo valdymas (Siemens PLC valdiklis, pagrįstas S7-300) - Preciziniai stūmokliniai dozavimo siurbliai A ir B komponentams - EKDP A komponentui – 257 ccm - EKDP B komponentui – 64 ccm --> 1 vnt. atsarginiai EKDP A ir EKDP B įtraukti. Šie buvo generališkai suremontuoti Rampf (žr. nuotrauką). Pastaba: Užpildymo įrenginys yra mūsų padalinyje Austrijoje.

Būklė: geras (naudotas), Gamybos metai: 2019, Mössner Rekord SSF 801 juostinio pjūklo staklės Galingiausios Mössner juostinės pjūklo staklės, naudojamos ten, kur būtinas maksimalus našumas. Absoliutus flagmanas tarp vertikalių aukštos klasės juostinių pjūklų staklių Šios staklės pasižymi maksimaliu tikslumu, išskirtiniu sklandumu ir neprilygstamu ilgaamžiškumu nuolatinėje pramoninėje eksploatacijoje. Kdsdpszc Uvwjfx Ab Njp Juostinio pjūklo bazinė komplektacija: - Stabilios ketaus konstrukcijos korpusas - Pjovimo greitis reguliuojamas dažnio keitikliu ir trifaziu varikliu su potenciometru - 2 pavarų perjungimo transmisija arba nuolatinis pjovimo greičio reguliavimas su flanšiniais guoliais ir dažnio keitikliu - Rankinis juostos įtempimo įtaisas su hidrauliniu rodmeniu - Pakreipiamas darbo stalas – į dešinę iki 30°, į kairę iki 15° - Keičiami aliumininiai bėgimo ratai su kietos gumos danga - Viršutinis ratukas reguliuojamas - Apsauginio durų jungikliai ratų durelėse - Dažymas: RAL 7035 šviesiai pilka, durelės RAL 5005 signalinė mėlyna Techniniai duomenys: Gamintojas: Mössner (August Mössner GmbH + Co. KG) Modelis: Rekord SSF 801 Ratuko skersmuo: 800 mm Didž. pjovimo plotis (iškyša): 785 mm Didž. pjovimo aukštis: 670 mm (pasirenkamai iki 800 mm) Stalo matmenys: 960 × 1000 mm Didž. stalo apkrova: 750 kg Variklio galia: 11 kW Pjovimo greitis su transmisija: 26 – 180 m/min ir 290 – 2000 m/min Pjovimo greitis su flanšiniais guoliais: 500 – 2000 m/min Staklių svoris apie: 2 300 kg Matmenys (Ilgis x Plotis x Aukštis): 2240 x 1080 x 2900 mm Metai: 2019 Naujos kaina: 54000,- € „Viskas iš vienų rankų: esant poreikiui, galime pasiūlyti Jūsų projektui tinkamą banko finansavimą.“ komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos – pagal užklausą!

Gamybos metai: 2021, būklė: naujas, Aluminum flat conveyor belt without substructure Conveyor belt length: 4000mm Drive roller: knurled Return roller: crowned and precision-turned Our core competency lies in delivering exactly what our customers truly need. We work together with our customers to develop customized, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone as well to find the appropriate solution for your application. PVC conveyor belt Kdodjhfwcbspfx Ab Nep Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width 500mm (external) Wave edge welded on both sides, 40mm high T-30 cleats – 400mm spacing * antistatic through threads in the running surface fabric Endless welded with staggered finger joint Food safety certificate included Full-surface V2A stainless steel support plate Drive: Motor approx. 1.1KW * optionally controllable via frequency inverter Connection 220/400V

Būklė: naujas, Gamybos metai: 2025, Blasting Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fills + blast kettle fill, allowing for long blasting sessions without refilling. Type SC.20FHC.5800 Basic Standard features – ready to operate: (Just add blasting media, connect power and compressed air) 1x Control cabinet with emergency stop, Siemens Logo 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blast hose DN 25 with 8mm blast nozzle 1x Remote control with dead man’s switch 1x Feed chute/bunker for blasting media 1x Blasting media sieve + collection container for coarse particles 1x Vertical separator for blast dust extraction (reduces dust during blasting) 1x Filtration unit with pre-chamber separator 1x Extraction wall as louvre-type impact separator 1x Rubber wall cladding 4mm with tissue reinforcement 1x Tear plate floor 3/5 1x LED lighting 1x Emergency lighting, door end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy loading via forklift - Container widening - Container extension - Crane roof hatch - Crane track 500kg - C-profile rail for powder coaters - Blast trolley - Filter with Big Bag - HEPA post-filter for contaminated dusts, e.g. when blasting stainless steel Kdedpfxjw Ivk To Ab Nop - Stainless steel tear plate floor for stainless blasting - Aluminium tear plate floor and much more on request!

Būklė: naujas, Gamybos metai: 2026, 5 t akumuliatorinis smėliavimo vagonas smėliavimo įrenginiui - 5 t apkrova - Skirtas bėgių sistemai - Varomas akumuliatoriumi - Nuotolinis valdymas Kdedeyyxidspfx Ab Nep - Matmenys: Ilgis = 3000 mm, Plotis = 1000 mm - Paviršiai ruošinių laikiklių tvirtinimui

Būklė: naujas, Gamybos metai: 2026, Slėginė smėliavimo kabina vidiniam vamzdžių smėliavimui su sukamuoju stalu ir rankiniu veikimo režimu - Filtravimo sistema Kedpfjyn Inwjx Ab Njdp - Sukamasis stalas su prizmės formos įdėklu kaip vamzdžio atrama - Varoma vidinė vamzdžio strėlė - Programų išsaugojimas, važiavimo kelias, padavimo greitis, išpūtimo funkcija - Išorinė smėliavimo antgalis su osciliacija (pasirinktinai)

Būklė: naujas, Gamybos metai: 2026, Four-axis controlled pressure blasting cabin for cleaning casting moulds, steel rings, casting dies in aluminium casting, tyre moulds, press tools, etc. Ksdpfx Aodrtansb Njdp The movement of the blasting nozzles is freely programmable. Equipped with 2 automatic nozzles and 1 manual blasting nozzle for touch-up cleaning of components. Featuring a Hardox rotary table and screw conveyor for long-lasting operation of the blasting system. For inquiries regarding technical specifications, please contact us in writing or by phone. These machines are based on manufacturing at the Großenlüder site since 1971. Harth & Seifert – Georg Fischer – Schiffmann und Seidl – Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Būklė: naujas, Gamybos metai: 2026, Šlifavimo medžiagos tiekimo sraigtas 5 m su dozavimo gaubtu, skirtas montuoti kaip skersinis tiekimo sraigtas prie kaušinės transporterio salės gale (šlifavimo medžiagos įstūmimas su krautuvu per visą salės plotį). - 5 m + išleidimas prie kaušinės transporterio, vientisas sraigtas Ø250 mm su 5 mm storio sraigto mentėmis. - Gali būti naudojamas kaip šlifavimo medžiagos rezervuaras. Srautinė sistema automatiškai papildo šlifavimo medžiagą, kai reikia, naudodama lygio daviklį. - Pagal įrengimo gylį gali būti nepertraukiamai naudojamas iki 24 valandų be salės valymo. - Salės valymas su krautuvu/arba ratiniu krautuvu užtrunka tik 10 minučių. - Labai mažos priežiūros ir remonto išlaidos, palyginti su pilno grindų konvejeriu. - Ypač gerai tinka labai sunkiems ruošiniams. - Maža įsigijimo kaina, palyginti su viso grindų konvejeriu. - Mažesnės pamatų išlaidos nei naudojant viso grindų konvejerį. Kdedpjynz Idsfx Ab Nop - Palyginti su grioviu, galima įstumti per visą salės plotį. - Labai ilgas garantinis laikotarpis.

Būklė: naujas, Gamybos metai: 2026, Slėginis smėliavimo indas 200 l, mobilus, skirtas statybvietei arba stacionariam naudojimui. Armatūra saugiai pritvirtinta po rankena. Labai tinkamas naudoti sudėtingomis statybvietės sąlygomis. Komplektą sudaro: - 200 l slėginis indas - Pirminis sietelis - Apsauginis dangtis nuo oro sąlygų - Vandens separatoriaus filtras - Slėgio mažintuvas - Tiekiamo oro reguliavimas (tiek į indą, tiek į smėliavimo žarną) - Smėliavimo žarna Ø25 mm, 10 m - Venturi tipo smėliavimo antgalis Ø8 mm (oro sunaudojimas prie 6 barų: apie 3,57 m³/min) - Smėliavimo mišinio vožtuvas, Y formos, gumuotas mažesniam susidėvėjimui - Kvėpavimo oro filtras su 10 m žarna - Smėliavimo šalmas Saugos įranga: - Miręs žmogaus jungiklis su valdymo laidu - Greito išleidimo sistema su valdymu Papildomai pagal pageidavimą: - Didesnė rankena su žarnos laikikliu - Drėgno smėliavimo galvutė - Kvėpavimo oro šildytuvas Kdsdpfx Asynr E Tsb Nsp - Transportavimo rėmas su talpa ir dangteliu, skirta daugvalandiniam smėliavimui be papildymo - ir kt. Pagaminta Vokietijoje.

Būklė: naujas, Gamybos metai: 2026, Slėgio srovei skirtas 140 l mobilus indas, tinkantis naudoti statybos aikštelėje arba stacionariai. Kodpoynr E Hjfx Ab Njdp

Būklė: naujas, Gamybos metai: 2026, 100 l talpos mobilus slėginis srovės katilas, skirtas naudoti statybvietėje arba stacionariai. Armatūra saugiai pritvirtinta po rankena. Labai tinkamas naudojimui atšiauriomis statybų aikštelės sąlygomis. Sudėtis: - 100 l slėginis katilas - Pirminis sietas - Apsauginis dangtis nuo oro sąlygų - Vandens atskirtuvas - Slėgio reguliatorius - Tiekiamo oro reguliavimas (oro kiekis į katilą ir srovės žarną) - Srovės žarna Ø25 mm, 10 m - Venturio tipo srovės antgalis Ø8 mm (oro sunaudojimas esant 6 bar: apie 3,57 m³/min) - Srovės medžiagos maišymo vožtuvas Y formos, su guma – mažesniam nusidėvėjimui - Kvėpavimo oro filtras su oro žarna 10 m - Srovės šalmas Saugos įranga: - Mirštančio žmogaus jungiklis su valdymo kabeliu - Greito išleidimo valdymas Papildomai: Kodpfx Abeynr Eme Nsdp - Didesnė rankena su žarnų laikikliu - Šlapio srovės antgalis - Kvėpavimo oro šildytuvas - Transportavimo rėmas su Hobbock kibiru ir dangčiu – ilgesniam darbui be papildymo - ir t.t. Pagaminta Vokietijoje.

Būklė: naujas, Gamybos metai: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Width: 2050 mm Depth: 935 mm Height: 955 mm Pneumatic lifting door, with the advantage that the blasting media falls into the cabin when the door is opened, rather than onto the floor. Kdedpfx Aofnh Rvjb Nep If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are manufactured at our Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with your long-standing, well-known contacts.

Būklė: naujas, Gamybos metai: 2026, Tumble belt blast machine with 7.5 kW direct-drive disc wheel turbine, equipped with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Kdedjg S Rt Eopfx Ab Nop

Būklė: naujas, Gamybos metai: 2025, Spinner wheel rotary table system D=1500mm, 2x 7.5 kW spinner wheels Kdodpfodtq Anox Ab Nep If you have any questions regarding technical specifications, please contact us in writing or by telephone. The foundation of these machines lies in continuous production at the Grossenlüder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, supported by the same long-standing, well-known points of contact.

Būklė: naujas, Gamybos metai: 2025, Pressure Blast Cabinet DSK 1102 S with trolley and rotary table. Kdedpfxjdhl Ngj Ab Nsp Width: 1500mm Depth: 1235mm Height: 995mm Pneumatic lift door. If you have any questions regarding technical specifications, please contact us in writing or by phone. These machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with the long-standing contact persons you are familiar with.