Hidrogarne/Garnet Mv-800/Nc Sincro pirkti naudotą (13 400)

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: nepatikrintas, darbinis greitis: 110 mm/s, atbulinės eigos greitis: 180 mm/s, atstumo lentelė iki stūmoklio: 1 500 mm, bendras ilgis: 3 800 mm, bendras plotis: 4 500 mm, bendras aukštis: 6 400 mm, We are offering a new build of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Specifications: Press Force: 800 T Opening Force: 80 T Motor Power: 55/75 + 55/75 kW Ram Stroke: 1000 mm Rapid Advance Speed: 110 mm/s Working Speed: 6 mm/s Return Speed: 180 mm/s Guide Diameter: 250 mm Maximum Pressure: 250 bar Usable Table Area: 3,500 x 2,000 mm Lower Table Travel: 2,000 mm Between Columns: 2,000 mm Clear Height: 1,500 mm Gbodpfowlrv Ujx Aa Uel Total Width (Front): 3,800 mm Total Depth (Side): 4,500 mm Overall Height: 6,400 mm Weight: 134,600 kg The MV-800E/NC-SINCRO press has been specifically developed for setting up and testing molds, dies, and punches. The four columns, each with a diameter of 250 mm, are made from C45E steel and designed to withstand heavy-duty use. It is equipped with an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The system meets all essential health and safety requirements according to CE regulations. STRUCTURE AND TABLE • A structure capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic unit with automatic shut-off of rapid advance speed and independent operation, equipped with decompression and proportional pressure pre-fill valves. Includes digital potentiometers on the upper table for displacement control, and an electronic synchronization system for compensation of off-center or unbalanced forces. • The press is fitted with a lateral pressure switch for optimal pressure adjustment according to the working requirements. • Glycerine gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electric system for operating the main cylinder feed at one or two speeds. • The press features both a manual and automatic cycle (activated via a test selector switch): • The manual cycle allows all movements of the press to be executed step-by-step at low speed. • The automatic cycle enables the press to complete a full production cycle independently. • Electrical safety system for the upper table fall-arrest device. • Lower table with hydraulic withdrawal and physical stops. • The machine is operated via a control panel with a touchscreen display for entering operating and calibration data. • Two optical safety curtains (1,000 mm) with safety level IV are installed at the front and rear. • Siemens electrical components are manufactured in accordance with current CE regulations and IP55 protection class. • Electrical and hydraulic functions are redundant and self-monitoring. Includes an additional safety block and self-testing devices for both operation and safety. Includes inspection and certification for correct operation and the safety distance of the light barriers. • Safety is additionally ensured by a laser and area protection with safety light curtains, safety level IV.

Būklė: naujas, mašinos/transporto priemonės numeris: MV-250E/NC, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 250 t, stalo plotis: 2 500 mm, stalo ilgis: 1 150 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING TASKS TECHNICAL DATA Pressing force / Main cylinder T 250 Pressing force cushion T 50 Motor power kW 11 Stroke of ram mm 500 Approach speed mm/s 80 Working speed mm/s 7 Return speed mm/s 105 Column diameter mm 150 Max. pressure Bar 260 Usable table area mm 2,500 x 1,150 Column spacing mm 2,500 x 700 Maximum daylight mm 1,000 Cushion size mm 950 x 750 Working height mm 1,100 Overall height mm 3,650 Weight kg 15,000 The MV-250E/NC hydraulic four-column press belongs to the M/NC series and has been specially developed for increased precision and capacity, particularly for deep drawing applications. It is equipped with an upper and lower table made of C45E steel, featuring DIN-650 T-slots to ensure minimal friction during the vertical movement of the upper table. Maintenance-free bimetal bushings and perfect parallel alignment via four chrome-plated and precision-ground cylindrical columns further guarantee optimal operation. An optimized hydraulic system operates at pressures below 290 Bar, ensuring long service life and reliable performance. The press complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLES • Comprises three electrically welded blocks fabricated exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Designed and calculated using Finite Element Analysis software. • The lower table is equipped with a 50-ton hydraulic cushion (usable area 950 x 750 mm) and three front consoles to support tools outside the press area. • Integrated SIEMENS KTP-400 NC for controlling upper table stroke, speed adjustments, and cushion operation. • Includes SIEMENS S7 PLC enabling storage of up to 99 job presets. CYLINDER AND HYDRAULIC UNIT • Single-acting cylinder with honed liner, chrome-plated piston, and wear-resistant guides. Gbsdjwkuchspfx Aa Ujl • Complete hydraulic unit installed at the top of the press. • Hydraulic unit includes a low-noise Denison hydraulic pump and air-oil cooler. • Features: • Decompression system • Pressure solenoid valves • Pre-fill valves • Communication valve • Check valve • Pressure relief valve • Safety drop valve ELECTRICAL INSTALLATION AND SAFETY • Includes SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch KTP-400 touchscreen panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time. Offers memory for 99 recipes, with each recipe capable of programming all aforementioned parameters. • The electrical control panel is equipped with a selector switch to choose the mode of operation: manual “Setup” or automatic “Production” cycle. • Machine operation via electric low-voltage foot pedals. • For safety, the press features Category IV light barriers (front working area), two fixed lateral protection guards, and a rear access guard with magnetic separation detector.

Būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: MV-300E/NC, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 300 t, stalo plotis: 1 250 mm, stalo ilgis: 1 250 mm, bendras ilgis: 2 300 mm, bendras plotis: 1 800 mm, bendras aukštis: 3 500 mm, bendras svoris: 18 000 kg, slėgis: 320 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, KETURKOLONĖ HIDRAULINĖ PRESAS SPAUSDINIMO, GILIOJO TEMPIMO, IŠKIRTIMO IR NUBRŪŽINIMO DARBAMS Pagaminta pagal individualų užsakymą, siekiant užtikrinti didesnį tikslumą ir pajėgumą, ypač skirta gilajam tempimui, iškirtimui ir nubružinimo darbams. Gsdpfxjwphhnj Aa Usbl Įrengta viršutine ir apatine stalu iš C45E plieno, mechaniniu būdu apdirbtais su DIN-650 grioveliais, garantuojančiais minimalų trintį vertikaliame viršutinio stalo judėjime, naudojant priežiūros nereikalaujančius bimetalinius įvores ir tobulą lygiagretumą pasiekiant keturiomis chromuotomis, šlifuotomis cilindrinėmis kolonomis. Naudoja optimizuotą hidraulinę sistemą su 290 barų slėgiu, taip užtikrinant ilgalaikį patikimumą ir eksploatavimo trukmę. Atitinka visus pagrindinius CE saugos ir sveikatos reikalavimus.

Būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: MV-600E/NC, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 600 t, darbinis greitis: 5 mm/s, atbulinės eigos greitis: 18 mm/s, stalo plotis: 990 mm, stalo ilgis: 890 mm, bendras svoris: 23 000 kg, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, HYDRAULIC FOUR-COLUMN PRESS FOR PUNCHING, DRAWING, PIERCING, AND DEBURRING OPERATIONS Force: 600 tn Motor power: 40 HP at 440 Vac / 60Hz Working speed: 5 mm/s Approach speed: 15 mm/s Return speed: 18 mm/s Ram stroke: 1,015 mm (40") Guide diameter: 200 mm Table usable area: 990 x 890 x 130 mm (39" x 35" x 5") Between columns: 990 x 370 mm Vertical clearance: 1,625 mm (64") Working height: 990 mm (39") Lower hydraulic knockout: 80 tn Lower knockout stroke: 406.4 mm (16") Upper hydraulic knockout: 80 tn Upper knockout stroke: 406.4 mm (16") Total front: 1,850 mm Total side: 1,700 mm Overall height: 4,500 mm Weight: approx. 23,000 kg Gbedpfxowpggie Aa Uol The MV-600E/NC four-column hydraulic press is part of the M/NC series and has been specifically developed for increased precision and capacity; it is designed for punching, deep drawing, blanking, and deburring tasks. STRUCTURE AND TABLES • Made from three electro-welded blocks exclusively constructed with S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Equipped with a SIEMENS SIMATIC S7 1200 PLC and a 7" HMI KTP-700 touch panel, allowing the programming of force, cylinder stroke, and speeds, with a memory capacity for 300 cycle programs. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Motorized hydraulic unit with two speeds and automatic disengagement of rapid speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch on the side enables precise adjustment of the pressure suitable for each operation. • Glycerin pressure gauge with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical control panel features a selector switch for manual, semi-automatic, or automatic operation, as well as a speed selection switch for fast or slow operation. • Equipped with a PLC to support maneuvering and decompression timing. • Machine operation is carried out via a low-voltage dual-hand pushbutton station. • Electrical and hydraulic operations are redundant and self-monitoring, with an additional safety block and self-checking devices for safe maneuvering. Includes verification and certification of correct operation and safety distance for light curtains. • Safety is ensured by Category IV light curtains in the front working area, two fixed side safety guards, and a movable rear guard with magnetic safety switch. • The machine includes an IXON system for online remote support in case of faults or for reprogramming. • Access ladder with top walkway for maintenance (scaffold).

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 300 t, darbinis greitis: 14 mm/s, atbulinės eigos greitis: 265 mm/s, stalo plotis: 1 000 mm, stalo ilgis: 700 mm, gerklės gylis: 500 mm, bendras ilgis: 1 000 mm, bendras plotis: 2 400 mm, bendras aukštis: 3 500 mm, bendras svoris: 13 500 kg, slėgis: 290 juosta, darbinio aukščio: 1 100 mm, darbo diapazonas: 800 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Spaudimas: 300 t Variklio galia: 30 kW Išdrožos gylis: 500 mm Darbinis greitis, kintamas: 14,9–9 mm/s Prisiartinimo greitis: 178 mm/s Grįžimo greitis: 265 mm/s Maksimalus slėgis: 290 bar Stūmoklio eiga: 500 mm Apatinio stalo matmenys: 1.000 x 700 mm Viršutinio stalo matmenys: 800 x 600 mm Maks. vertikalus tarpas: 800 mm Darbinis aukštis: 1.100 mm Bendra priekinė dalis: 10.000 mm Bendras šoninis plotis: apie 2.400 mm Bendras aukštis: apie 3.500 mm Gbjdewpf S Depfx Aa Uel Svoris: apie 13.500 kg.

Būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: FDL-150-100E/NC, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 150 t, stalo plotis: 800 mm, tarpas tarp stulpų: 1 250 mm, bendras ilgis: 1 200 mm, darbinio aukščio: 600 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR EXTRACTION OF THE MANDREL AND ROTOR SHAFT, AS WELL AS FOR SHAFT EXTRACTION DURING REPAIR Equipped with a retractable table for stacking and handling rotors and stators. Complies with and meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES Features a rigid, electric-welded fixed-bed frame made exclusively from S355JR steel. Gsdpfx Aewpg Awea Uobl It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Designed and calculated using finite element analysis software. Mechanically movable T-slotted table, 1200 x 800 mm, with a 1200 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. Central table bore of 250 mm diameter, maximum depth 550 mm. Effective table lifting capacity for movement: 4 Ton. Travel speed: 30 mm/sec. Internal front width: 1250 mm (distance between columns) Working height: 600 mm. 2 hydraulic cylinders, each with 75 Ton force (total 150 Ton), 1200 mm stroke, interconnected by a plate with a 250 mm central hole. Maximum usable plate height for cylinders: 1,440 mm. Minimum usable plate height for cylinders: 200 mm. EXTRACTION CYLINDER 1 central cylinder with 100 Ton force and 1200 mm stroke. Prepared to fit extraction clamp; piston rod end threaded at M 35.150 x 40 mm length. Maximum usable height for extraction cylinder: 1,600 mm at rod thread base. Minimum usable height for extraction cylinder: 400 mm at rod thread base. HYDRAULIC UNIT Two-speed hydraulic power unit, 5.5 HP “Siemens Motor”, with automatic disconnect of the rapid speed and independent speeds. Maximum pressure: 250 bar. Pressure control system by proportional valves. Air-oil cooler. Temperature sensor. Hydraulic unit positioned on the right side. Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen (model MTP) with 99 memory slots, enabling adjustment of pre-pressing, pressing power, press-fit, as well as stroke and dwell time of pressing and extraction cylinders during processes. Electrical and hydraulic operations are redundant and self-monitored. Includes an additional safety module and self-monitoring devices for operation and safety. Includes verification and certification of correct operation and safety distance for light curtains. Operated by a low-voltage, two-hand electric button. All installed electrical materials are Siemens (relays, contactors, main motor, etc.). Prepared for Industry 4.0. For safety, features Category IV photoelectric safety barriers located at the front work area, two fixed lateral guards, and a rear service door with magnetic disconnect detector.

Būklė: naudotas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, eigos ilgis: 250 mm, atbulinės eigos greitis: 60 mm/s, stalo plotis: 700 mm, stalo ilgis: 500 mm, stalo aukštis: 900 mm, bendras ilgis: 1 525 mm, bendras plotis: 1 075 mm, bendras aukštis: 2 675 mm, bendras svoris: 2 540 kg, atstumas tarp šoninių atramų: 800 mm, Įranga: apsaugos šviesos užtvara, RIGID FRAME HYDRAULIC PRESSES We have designed the R/NC series rigid frame motorized hydraulic presses in six different capacities ranging from 80 to 500 tons. Specially engineered for stamping, punching, and deep drawing operations. The latest generation R series hydraulic presses have evolved into versatile machines, including the capability for integration into automated production lines. They operate at a hydraulic pressure lower than 320 BAR to ensure greater durability of the entire hydraulic system. The R/NC series forming and stamping presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and machined after welding to ensure perfect parallelism and precision. Structural design is carried out using finite element analysis software. In this way, we always uphold our high standards of precision and quality. They come equipped with a machined upper and lower table made of C45E steel, featuring DIN-650 T-slots. The upper table ensures perfect parallelism through four lateral cylindrical guides with maintenance-free, bimetallic anti-friction bushings. The double-acting cylinder features a honed barrel, chrome-plated piston rod, and maintenance-free wear-resistant guides. The hydraulic power unit is motorized, with two speeds and automatic disengagement of fast speed. It includes a cylinder decompression valve. A SIEMENS SIMATIC S7 1200 safety PLC and a 4'' MTP-400 touchscreen are provided as standard, positioned above the electric foot pedal actuator. The interface allows programming of operating mode (semi-automatic and automatic), force, stroke, and dwell time of the upper cylinder. It offers storage capacity for 99 recipes, with each recipe able to store all adjustable parameters. The electrical panel features a selector for manual or automatic operation, as well as a key switch for maintenance tasks. Both electrical and hydraulic controls are redundant and self-monitored. An additional safety block and self-monitoring devices are included for operation and safety. Verification and certification of correct operation as well as safety distance for the safety light curtains are included. For enhanced safety, type 4 PLe safety light curtains are installed at the front work area, along with two fixed side guards and a rear interlocked guard with magnetic safety sensor, featuring polycarbonate windows and internal LED lighting. Provision is made for installation of a hydraulic cushion or ejector. The machine complies with all essential health and safety requirements according to CE regulations. Delivered with an operating manual. Technical Specifications Force: 100 t Motor power: 13 kW Working speed: 3–9 mm/s Approach speed: 40 mm/s Return speed: 60 mm/s Maximum pressure (up to 320 bar): 319 bar Piston stroke: 250 mm Guide diameter: 50 mm Lower table: 700 × 500 mm Upper table: 600 × 450 mm Maximum vertical opening: 500 mm Front opening: 800 mm Gbedpfxowlgkms Aa Uel Working height: 900 mm Total front width: 1,525 mm Overall length: 1,075 mm Total height: 2,675 mm Weight: 2,540 kg

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 400 t, eigos ilgis: 750 mm, darbinis greitis: 106 mm/s, atbulinės eigos greitis: 125 mm/s, stalo plotis: 2 000 mm, stalo ilgis: 1 000 mm, presavimo greitis: 12 mm/s, Įranga: apsaugos šviesos užtvara, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS We are offering a new or rebuilt version of this press. The press will be available for sale in the 2nd to 3rd quarter of 2026, as the current project timeline has been extended by the customer. The hydraulic press CF-400E/NC belongs to the CF/NC series and is specifically designed for straightening railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The machine uses an optimized hydraulic system operating at less than 255 bar, ensuring long service life and reliable performance. It meets all essential health and safety requirements as per CE regulations. TECHNICAL DATA Press force: 400 t Motor power: 22 kW Variable working speed: 4–12 mm/s Approach speed: 106 mm/s Return speed: 125 mm/s Max. pressure: 255 bar Stroke: 750 mm Lower table dimensions: 2,000 x 1,000 mm Ram plate dimensions: 2,000 x 1,000 mm Max. vertical clearance: 1,000 mm Working height: 960 mm Overall height: 3,560 + 600 mm Weight: 39,500 kg STRUCTURE AND TABLE: • The C-frame structure is fully welded from S355JR steel. • After welding, the frame is stress-relieved and machined to ensure perfect parallelism and precision. • The design is calculated and optimized with finite element analysis software. • The upper table is perfectly aligned using four lateral cylindrical guides of 80 mm diameter, each equipped with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT: • The main cylinder is single-acting with a sleeved body, hard-chrome plated piston, and maintenance-free, wear-resistant guides. • Two lateral double-acting cylinders with hard-chrome plated pistons and wear-resistant guides allow for rapid approach and return movement. • Includes two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for approach and return operations. The pump provides constant power and variable flow rate. • Equipped with directional valve, pressure relief valve, decompression valve, and air-oil cooling system. • Glycerin-filled pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY: Gsdpfx Aowkv A Nja Uobl • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7-inch touchscreen, model KTP-700 COMFORT, housed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, power, stroke, and dwell time. Features a memory capacity for 300 recipes, with each recipe fully programmable for all parameters. • Electrical and hydraulic controls are redundant and self-monitoring. Includes an additional safety block and self-diagnosis devices for controls and safety. Encompasses verification and certification of correct operation and safety clearances for light curtains. • Controlled via an electric low-voltage foot pedal. • For safety, category IV laser and work area protection with safety light curtains are integrated.

Būklė: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Techninės detalės Rūpinio skersmuo: 1000 mm Rūpinio svoris: - kg Rūpinio aukštis: - mm Valdymas: Šlifavimo veleno variklis: 11 kW Bendras energijos poreikis: 25 kW Staklių svoris apie: 6500 kg Reikalinga vieta apie: 4100 x 3200 x 2600 mm Papildoma informacija Staklės iš uždarytos gamyklos Įranga: 500 litrų aušinimo įrenginys su popieriniu juostos filtru 4 šlifavimo diskai (3 nenaudoti) Techniniai duomenys: Apvalaus stalo skersmuo: 800 mm Maks. atstumas nuo apvalaus stalo iki šlifavimo veleno centro: 850 mm Šlifavimo disko skersmuo: 400 mm Šlifavimo disko plotis: 80 mm Gsdpfx Ajy Idrtea Ujbl

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Spaudimas 30,0 t Lenkimo ilgis 800 mm Galinės atramos reguliavimas maks. 420 mm Viršutinės sijos eiga 100 mm Montavimo aukštis 310 mm Gbodpfx Asyuzchoa Ujl Darbo greitis 10,0 mm/sek Grįžimo greitis 12,0 mm/sek Valdymas VISION 120 Alyvos talpa apie 38,0 l Įtampa 380 V Bendra galios poreikis 4,5 kW Staklių svoris apie 890 kg Užimama vieta apie 1250 x 950 x 1900 mm Naujos kaina apie 24.000 Eur Speciali kaina pagal užklausą Įranga: - Elektrohidraulinė NC lenkimo staklės – lengva valdyti - UNITRONICS „VISION 120“ NC valdymas * Presavimo gylio ir galinės atramos (Y + X ašis) valdymui - NC elektrinė-motorinė galinė atrama (X ašis) * Galima įvesti reikšmę (norima/aktuali reikšmė) * 2 rankiniu būdu reguliuojami atraminiai pirštai - Valdymas priekyje dešinėje - Įvairūs lenkimo/įdėjimo įrankiai * Viršutinė įrankių apkaba: AMADA/PROMECAM - 1 laisvai judantis pėdų jungiklis - Priekinis avarinio stabdymo mygtukas - Galinė apsaugos sistema - Instrukcija

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, sukamosios stalo skersmuo: 800 mm, bendras svoris: 6 500 kg, šlifavimo disko skersmuo: 400 mm, ruošinio skersmuo (maks.): 1 000 mm, šlifavimo ratuko plotis: 80 mm, TECHNINĖ INFORMACIJA Ruodinėlio skersmuo: 1.000 mm Apvalaus stalo skersmuo: 800 mm Maks. atstumas nuo apvalaus stalo iki šlifavimo veleno centro: 850 mm Šlifavimo disko skersmuo: 400 mm Šlifavimo disko plotis: 80 mm STAKLIŲ DUOMENYS Gbedpfx Aasxr U R Eo Uol Bendras galios poreikis: 25 kW Šlifavimo veleno variklis: 11 kW Matmenys ir svoris Užimama vieta (I x P x A): apie 4.100 x 3.200 x 2.600 mm Staklių svoris: apie 6.500 kg ĮRANGA 500 litrų aušintuvo įrenginys su popierine juostele filtru 4 šlifavimo diskai (3 nenaudoti)

Būklė: geras (naudotas), Gamybos metai: 2011, Ekomex MV 800 Vakuuum-Massierer Gjdpfx Aewl Hzloa Uobl Vakuum-Massierer werden hauptsächlich in der Fleisch- und Geflügelindustrie eingesetzt. Sie dienen zur Vakuumbehandlung von Fleischstücken unterschiedlicher Größe – sowohl große als auch kleine Stücke von rotem Fleisch – sowie zur schonenden Bearbeitung empfindlicher Geflügelteile wie Flügel, Keulen und Filets. Neben dem Massierprozess können auch gesteuerte Pökelprozesse durchgeführt werden, um Rohmaterialien mit oder ohne Knochen zu marinieren. Hersteller: Ekomex Modell: MV 800 Baujahr: 2011 Kapazität: 800 Liter Maximale Beladung: 50% Leistung: 3,5 kW / 50 Hz / 400 V Trommeldrehzahl: 1–8 U/min Maschinenabmessungen (LxBxH): 2.200 x 1.500 x 1.600 mm Maschinengewicht: 700 kg.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, stalo plotis: 700 mm, stalo ilgis: 450 mm, bendras ilgis: 1 160 mm, bendras plotis: 1 290 mm, bendras aukštis: 2 085 mm, bendras svoris: 1 750 kg, slėgis: 320 juosta, darbinio aukščio: 850 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, PRISTATYMAS IŠ KARTO!! Gjdpewphvrofx Aa Usbl HIDRAULINIAI GERVĖS FORMOS PRESAI SU VIRŠUTINIU STALU Sukūrėme CM/NC serijos hidraulinius presus su keturių skirtingų galių diapazonu nuo 50 iki 150 tonų. Specialiai sukurti štampavimui, išmušimui ir giluminio tempimo darbams. Naujos kartos CM serijos hidrauliniai presai pasižymi universaliu pritaikymu, įskaitant galimybę integruoti šias mašinas į automatines gamybos linijas. PAPILDOMA ĮRANGA Vertikali šviesa 600 mm Vertikali šviesa 800 mm Stūmoklio eiga 450 mm SIEMENS PLC mod. SIMATIC S7 1200 su 7'' jutikliniu ekranu mod. MTP-700 Hidraulinis pagalvė Hidraulinis išstūmiklis Aušinimo įranga hidraulinei grupei Geometrija pagal Jūsų poreikius Valdymo pultas su lankstoma svirtimi Pramonė 4.0 Maršrutizatorius nuotolinei prieigai.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, darbinis greitis: 30 mm/s, atbulinės eigos greitis: 42 mm/s, stalo plotis: 450 mm, stalo ilgis: 450 mm, bendras ilgis: 1 350 mm, bendras plotis: 960 mm, bendras aukštis: 2 020 mm, presavimo greitis: 6 mm/s, This press has been specially designed for bending, embossing, forming, punching, assembly, and deep drawing operations. Models with forces ranging from 50 to 150 tons are available. Model: CD-50/NC Force: 50 T Motor power: 4 kW Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Maximum pressure: 320 bar Piston stroke: 250 mm Lower table: 450×450 mm Gbsdpowlgcijfx Aa Uel Ram with anti-rotation device Open height: 400 mm Weight: 1480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bush, a chrome-plated piston rod, and wear-resistant guiding elements. To prevent wear on the piston rod, the presses are fitted with a removable and replaceable pressure plate. The pressure plate can be substituted by tooling. It is equipped with an anti-rotation system, mounted on the cylinder using a clamp and a guide rod. The hydraulic system features two speeds, with automatic shut-off of the high-speed mode. The delivery includes a decompression valve for the cylinder. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch touchscreen (MTP-400 model), located above the electric foot pedal, are included as standard. This allows programming of the operating mode for both semi-automatic and automatic functions, control of force, stroke, and dwell time of the upper cylinder. It offers memory for 99 recipes, with each recipe able to include all previous parameters. The control cabinet has a switch to select the desired operating mode (manual or automatic) as well as a key switch for maintenance work. Both electrical and hydraulic controls are redundant and self-monitoring for maximum safety. The hydraulic safety block is equipped with electrically monitored position valves for essential safety requirements. Operation is via a dual-hand safety control system, complying with safety level IV. For safety, fixed side guards with a 650 mm front opening are installed. A hydraulic cushion or a hydraulic ejector can be fitted as an option. All machines are supplied with an operating manual. Presses from the CD series fully comply with all essential safety requirements and standards in accordance with CE regulations.

Būklė: naujas, Gamybos metai: 2026, Model: Mechanical with touch panel Tooth profiles: All tooth profiles Blade width: Band saws up to 350 mm (double-toothed and variable) Teeth: 0–60 teeth per inch (TPI) Cooling: 150–300 L/min Gjdpfx Ajy Rq Tioa Uobl Blade thickness: 0.6–6.0 mm Tooth pitch: 0–60 mm Tooth height: 0–30 mm Rake angle: 0–40°

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Funkcionalumas: ribota funkcionalumas, veleno skylė: 90 mm, bendras svoris: 8 500 kg, tekėjimo skersmuo: 800 mm, bendras ilgis: 3 500 mm, Universalus tekinimo staklės, darbinės būklės, tačiau keli padavimo mechanizmai neveikia; parduodamos su priedais, kurie matomi nuotraukoje (centravimo taškai, plokštelė, griebtuvai). Turi 800 mm skersmens darbinį plotį virš lovos, tačiau priekinė lovos dalis yra nuimama, taip leidžiant darbinį plotį padidinti iki 1000 mm; galima apdirbti iki 3500 mm ilgio velenus. Galvutė gali priimti 90 mm skersmens griebtuvą. Gbjdoy Idbnepfx Aa Ujl

Būklė: naudotas, Gamybos metai: 2001, Demag Ergotech koncepcija 800/420-310 (2001) Godoyyzqwjpfx Aa Uobl

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 2 h, Funkcionalumas: visiškai funkcionalus, GUIDETTI SINCRO MILL 530 Cable Granulation Plant + PMG-H 900 Pre-Shredder – Available Immediately – As New For sale is a high-quality cable recycling system from the Italian manufacturer Guidetti, comprising: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration system The system was installed, tested, and then professionally dismantled at a client’s site. Due to a change in project requirements, the system is now for sale. Condition: Near new (only used for testing) Availability: Immediately from stock – no lead time Price: Attractive price advantage compared to a new system ⸻ Key Advantages: Gbodoy Ahlyopfx Aa Uel • Available immediately – no months-long lead time as with new machinery • Only operated in test mode – accordingly, very minimal wear • Complete system including pre-shredder • Proven Guidetti technology ⸻ Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminium cables – no pre-sorting required. The system consists of: • Granulator (cutting mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99%. Combined with the PMG-H 900 pre-shredder, this results in a high-performance recycling line for industrial applications. ⸻ Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • Processes copper and aluminium cables ⸻ Technical Data Pre-Shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for preliminary shredding of cables, non-ferrous metals, and plastics. ⸻ Note: The system is available at short notice. Subject to prior sale. Inspection by arrangement possible.

Būklė: labai geros būklės (naudotas), rida: 445 875 km, galia: 316 kW (429,64 AG), pirmoji registracija: 09/2006, kuro tipas: dyzelinas, ašių konfigūracija: 8x4, ratų bazė: 5 710 mm, kuras: dyzelinas, spalva: kitas, vairuotojo kabina: miegamoji kabina, pavaros tipas: mechaninis, emisijos klasė: Euro 4, bendras ilgis: 8 860 mm, bendras plotis: 2 550 mm, Gamybos metai: 2006, Įranga: kranas,

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire diameter range: 3mm–8mm, maximum outside diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions (L/W/H): approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Includes a coiling plate for producing left-hand springs and a leg spring device. The machine's motor and drive system are defective. Documentation is available. Gsdsvripmspfx Aa Uebl

Būklė: geras (naudotas), Min.–max. pipe length: 100–1800 mm Gbsdeq U Rccspfx Aa Uol The system was previously used for deburring cut pipes!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 318 BG 75, šlifavimo ilgis: 800 mm, šlifavimo plotis: 300 mm, šlifavimo disko skersmuo: 250 mm, valdiklio modelis: CNC QUICK (SIEMENS 805, PLC), ašių skaičius: 2, TECHNINĖ INFORMACIJA Šlifavimo ilgis: 800 mm Maksimalus šlifavimo plotis: 300 mm Šlifavimo disko skersmuo: 250 mm Ašių skaičius: 2 Gedpeyhnlpefx Aa Uebl Stalo ilgis: 800 mm Stalo plotis: 300 mm Didžiausias atstumas tarp stalo ir ašies centro: 600 mm Maksimalus plotis: 70 mm Plotis: 50 mm Anga: 51 mm Stalo greitis nuo: 2 m/min iki 35 m/min Lėtasis eiga nuo: 2 m/min iki 1 000 m/min Automatinis skersinis pastūma nuo: 1 mm/min iki 10 000 mm/min Automatinis vertikalus padavimas iki: 10 000 mm/min ĮRANGOS DUOMENYS Valdymas: CNC QUICK (SIEMENS 805, PLC) Maitinimas: 50 Hz 3x 400 V Šlifavimo ašies variklis: 6,6 kW Bendras energijos poreikis: 22 kVA Mašinos svoris: 4 500 kg ĮRANGA Aušinimo skysčio įranga Popierinis filtravimo įrenginys Aušinimo skysčio/garų nutraukimo sistema Aušinimo skysčio temperatūros stabilizavimas Elektromagnetinė tvirtinimo plokštė Ilgis: 800 mm Elektromagnetinė tvirtinimo plokštė Plotis: 300 mm TAG tipo apipavidalinimo įrenginys TAD tipo profilio apipavidalinimo įrenginys Elektroninis balansavimo įtaisas Lempa Pilnai uždara purslų apsaugos kabina Sąsaja RS 232-C, V 24

Būklė: naujas, Brinkmann TS 21/300-MV+211 submersible pump, serial number: 0412003832-92658001, unused, 100% functional, scope of delivery as per photos Gbsdpfx Aour A Uxja Uel

Būklė: paruoštas naudoti (naudotas), Brinkmann TC 260 / 460 MV + 210 submersible pump 250 L/min No. 003, Serial No. as per photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gjdsi D Hmwjpfx Aa Uobl

Būklė: paruoštas naudoti (naudotas), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of wear, 100% functional, scope of delivery as shown in photos Gjdpfx Aasulqg No Uebl