Hidraulinis presas

Hidrogarne CF-400E/NC

Būklė: naujas, Isitan Hydraulic 4-Roll Plate Bending Machine Model: 4R HMS 1270 x 130 Top and Bottom Rolls Driven Hydraulic Side Roll Adjustment 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Panel Working Length: 1270 mm Top Roll Diameter: 130 mm Side Roll Diameter: 130 mm Total Motor Power: 3.3 kW Operating Speed: 5 m/min Weight: 2,150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending Capacity: 5 mm Pre-bending Capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Fjdpfx Ahoiffwqjwopd Material (ST 37 - ST 42 structural steel)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, YEAR: 2008 MAXIMUM RAM FORCE: 2,000 tons SLIDE STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm BLANKHOLDER FORCE (UPPER): 300 tons CUSHION STROKE (RAM): 200 mm FAST STROKE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE (SLIDE): 400 mm OVERALL HEIGHT: 9,145 mm DISTANCE BETWEEN UPRIGHTS (FRONT OPENING): 5,000 mm TOTAL WEIGHT: N/A Fjdjvm Eixspfx Ahwspd

Būklė: geras (naudotas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC Panel Year of Manufacture: 1970 Hydraulic press suitable for the fabrication of large components such as dished heads, tanks, boilers, shipbuilding, and steel construction applications. Refurbished in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet. Installed height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Comprehensive die package with radii: 10/20/30/50/60/80/100 Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine pit depth: 2,350 mm Specifications Metric / US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (Estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Fjdpfx Ahokvmi Sewepd Please Note: The information on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, however, accuracy cannot be guaranteed. Accordingly, no assertions or contractual terms are implied. We recommend verifying all critical details independently.

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 3ROLL3000X50MM, apatinio volelio skersmuo: 460 mm, viršutinio volo skersmuo: 500 mm, volelio skersmuo: 500 mm, vėjo ilgis: 3 100 mm, darbinis plotis: 3 000 mm, plieno lakšto storis (maks.): 50 mm, bendras svoris: 26 000 kg, įvesties srovės tipas: trifazis, darbinis ilgis: 3 000 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, 3-Walzen Planeten-Rundbiegemaschine mit Vorstauchung, 3000 x 50 mm Oberwalzendurchmesser: 500 mm LEISTUNGSDATEN Blechbreite: 3000 mm Blechstärke: 50 mm Vorbiegeleistung: 36 mm Mindestbiegedurchmesser: 2200 mm Leistung bezogen auf Materialgüte: 355 MPa --- Reduzierte Blechbreite: 2000 mm Fsdsvr S S Ropfx Ahwspd Kapazität Blechstärke: 55 mm --- Minimaler Biegeradius: 600 mm Alle Zubehörteile installiert: - Gehärtete Walzen - Konische Biegevorrichtung - Digitale Positionsanzeige - Installierte Leistung: 50 PS - Maschinengewicht: 26 Tonnen

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SH-250, bendras aukštis: 1 700 mm, bendras plotis: 2 000 mm, bendras ilgis: 3 000 mm, spaudimo jėga: 250 t, darbinis greitis: 4 mm/s, atbulinės eigos greitis: 8 mm/s, eigos ilgis: 450 mm, Įranga: dokumentacija / vadovas, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal ram hydraulic press is designed with a range of three different capacities from 100 to 250 tonnes. The horizontal hydraulic presses are specifically engineered for straightening and bending work on profiles, bars, and beams. The horizontal design of the machine allows easy handling of large beams and profiles. The latest generation HS series horizontal hydraulic press has evolved to provide versatile functionality, such as the possibility to fit a wide variety of tooling. They operate with a hydraulic pressure of less than 350 BAR to ensure maximum longevity of the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature a C-frame structure, fully welded and manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. All calculations and designs are made using finite element software. This allows us to consistently guarantee our high standards of robustness, precision, and quality. The presses are equipped with an anti-rotation main push cylinder and a rear support table, both made from high-strength steel and machined with DIN 650 T-slots. Standard equipment also includes support blocks made from C45E steel. Two height-adjustable side support rollers are supplied as standard, one on each side. PAGE 2/4 CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed tube, chromed piston rod, and maintenance-free wear guides. Cylinder operated by a lever-controlled hydraulic distributor. It features a removable block to prevent piston wear. Single-speed motorized hydraulic unit. ELECTRICAL INSTALLATION AND SAFETY Fpedpfjwk Hkqex Ahwsd Electrical installation includes a motor protection switch and emergency stop. Supplied with a glycerine manometer with tonnage reading and hydraulic oil. Complies with and meets all essential health and safety requirements according to CE regulations. Supplied with an instruction manual. OPTIONAL ACCESSORIES • Basic feed rails from 3,000 mm up to 12,000 mm with adjustable height. • Motorized feed rails from 3,000 mm up to 12,000 mm. • Hydraulic lifting and tilting of feed rails. • 415 mm long folding unit. PROMECAM clamping system. • Additional single-speed manual pump, allows both manual and motorized operation modes. • Low-voltage electric foot pedal control. • Precision limit switches with cylinder anti-rotation and electric foot pedal control. • Two-speed hydraulic unit. • Custom geometry to suit your requirements.

Gamybos metai: 2011, būklė: geras (naudotas), Zusatzausstattung nicht enthalten. Fsdpfx Aopxnwzjhwspd

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: nepatikrintas, bendras aukštis: 6 400 mm, bendras plotis: 4 500 mm, bendras ilgis: 3 800 mm, darbinis greitis: 110 mm/s, atbulinės eigos greitis: 180 mm/s, atstumo lentelė iki stūmoklio: 1 500 mm, We are offering a new build of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Specifications: Press Force: 800 T Opening Force: 80 T Motor Power: 55/75 + 55/75 kW Ram Stroke: 1000 mm Rapid Advance Speed: 110 mm/s Working Speed: 6 mm/s Return Speed: 180 mm/s Guide Diameter: 250 mm Maximum Pressure: 250 bar Usable Table Area: 3,500 x 2,000 mm Lower Table Travel: 2,000 mm Between Columns: 2,000 mm Clear Height: 1,500 mm Total Width (Front): 3,800 mm Total Depth (Side): 4,500 mm Overall Height: 6,400 mm Weight: 134,600 kg The MV-800E/NC-SINCRO press has been specifically developed for setting up and testing molds, dies, and punches. The four columns, each with a diameter of 250 mm, are made from C45E steel and designed to withstand heavy-duty use. Fpedswlrv Uspfx Ahwsd It is equipped with an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The system meets all essential health and safety requirements according to CE regulations. STRUCTURE AND TABLE • A structure capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic unit with automatic shut-off of rapid advance speed and independent operation, equipped with decompression and proportional pressure pre-fill valves. Includes digital potentiometers on the upper table for displacement control, and an electronic synchronization system for compensation of off-center or unbalanced forces. • The press is fitted with a lateral pressure switch for optimal pressure adjustment according to the working requirements. • Glycerine gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electric system for operating the main cylinder feed at one or two speeds. • The press features both a manual and automatic cycle (activated via a test selector switch): • The manual cycle allows all movements of the press to be executed step-by-step at low speed. • The automatic cycle enables the press to complete a full production cycle independently. • Electrical safety system for the upper table fall-arrest device. • Lower table with hydraulic withdrawal and physical stops. • The machine is operated via a control panel with a touchscreen display for entering operating and calibration data. • Two optical safety curtains (1,000 mm) with safety level IV are installed at the front and rear. • Siemens electrical components are manufactured in accordance with current CE regulations and IP55 protection class. • Electrical and hydraulic functions are redundant and self-monitoring. Includes an additional safety block and self-testing devices for both operation and safety. Includes inspection and certification for correct operation and the safety distance of the light barriers. • Safety is additionally ensured by a laser and area protection with safety light curtains, safety level IV.

Būklė: paruoštas naudoti (naudotas), galia: 134,102 kW (182,33 AG), tuščias svoris: 21 000 kg, bendras ilgis: 5 000 mm, bendras plotis: 2 120 mm, bendras aukštis: 2 140 mm, keliamoji galia: 400 000 kg, darbinis greitis: 15 mm/s, atbulinės eigos greitis: 49 mm/s, Tiesintuvo įrenginys sijoms ir kitiems elektrinis eigos reguliavimas (kartotiniam darbui). Rankinis lankstymo matricos atidarymo reguliavimas. Varomi voleliai ruošinio padavimui. Maks. stūmoklio reguliavimas: 620 mm Maks. atstumas tarp stalo ir stūmoklio: 600 mm (1020 mm be įrankių) Fpedpfx Ahov Rwfgowsd

Būklė: naujas, Sheet thickness: 45 mm Bending length: 3100 mm Top roll diameter: 510 mm Dimensions (LxWxH): 6300 x 2300 x 2590 mm Pre-bending: 35 mm Approx. weight: 33,500 kg Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EURO 7,000 - Material feed table EURO 3,700 - Oil cooler EURO 800 - Central support EURO 9,500 - Side supports EURO 10,200 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (customized for special customer requirements) Fsdpod Ab N Usfx Ahwepd We have numerous references!

Būklė: naudotas, tuščias svoris: 5 800 kg, didžiausias leistinas svoris: 30 200 kg, pirmoji registracija: 08/2012, kita apžiūra (TÜV): 09/2025, bendras ilgis: 7 950 mm, bendras plotis: 25 500 mm, bendras aukštis: 30 000 mm, pakaba: oras, padangos dydis: 385 / 55 R 22.5 / 5mm, priekinės padangos dydis: 385 / 55 R 22.5 / 5mm, darbinė masė: 36 000 kg,