Hidraulinis presas

Hidrogarne CD-50NC

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Lodsfxyhfjpfx Af Isrg Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naujas, Pressure: 30 t Stroke: 350 mm Table Surface Working Width: 750 x 260 mm Pressure: 221 bar Oil Capacity: 37 dm³ Maximum Working Speed: 9.8 mm/sec Return Speed: 14 mm/sec Total Power Requirement: 3 kW Machine Weight: approx. 385 kg Lodpfx Asi A S I Djf Iorg Cylinder Inner Diameter [mm]: 130 Piston Rod Diameter [mm]: 55 Piston Bottom Diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Height-adjustable work table - Joystick control for piston and speed The workshop press (30T) features a fixed cylinder and a motorized, height-adjustable work table. It is equipped with pressure regulation, pressure gauge, variable speed, and a joystick for moving the piston up and down. The joystick also allows you to adjust the speed, making this motorized hydraulic press ideal for precision work.

Sąlyga: naudotas, Gamybos metai: 1997, Slėgis: 40 t Gylis nuo stulpo: 300 mm Eiga: 630 mm Ledpfx Afovuucks Isrg Įrengimo aukštis: 900 mm Stalo matmenys: 620 x 520 mm Anga stalelyje: 150 mm Stalo aukštis virš grindų: 600 mm Stūmoklio paviršius: 150 mm Bendras galios poreikis: apie 15,0 kW Mašinos svoris: apie 4,5 t Užimama vieta: apie 1,0 x 1,9 x 3,0 m Leidžiama rankiniam detalių įdėjimui pagal CE standartą Su alyvos hidrauline pavara, valdymas pagal slėgį/laiką ir eigą, dviem rankomis valdoma Presą galima apžiūrėti veikiančią mūsų sandėlyje.

Sąlyga: naudotas, Technical details: Pressing force: 100 t Installation height (table/ram top): 800 mm Lrsdpfxsvc Ax No Af Isg Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size: 750 x 560 x 90 mm Table opening (diameter): Ø 26 mm Ram clamping surface (WxD): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Machine weight approx.: 5.5 t Approx. machine dimensions (LxWxH): 1.8 x 1.2 x 3.2 m

Sąlyga: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. Lrodpou Nfvuefx Af Iog *

Sąlyga: naudotas, Gamybos metai: 1986, Spaudimas 160 t Išsikišimas 360 mm Eiga 500 mm Nusileidimo greitis 200 mm/sek. Lsdpfxsv Rgwxs Af Ierg Pakėlimo greitis 125 mm/sek. Max. atstumas stalas - stūmoklis 1000 mm Stalo matmenys 900 x 630 mm Stūmoklio matmenys 850 x 450 mm Tvirtinimo kaiščio skersmuo x gylis 50 H7 / 85 mm Bendras energijos poreikis 17 kW Staklių svoris apytiksl. 7 t Užimamas plotas apytiksl. IxPxA 1,25 x 2,2 x 3,45 m

Gamybos metai: 2025, veikimo valandos: 10 h, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C1-25sE_1, CrimpOne C1-25sE – Made in Finland Lrjdpovr Dnkofx Af Ieg Servo-electric Hose Crimping Machine with Spindle Drive Technical Data Main Technology: AC Servo Ball Screw Max. Crimping Force: 250 kN Crimping Range: 10 – 54 mm Max. Hose Size: 1¼ inch Master Die D / L: 84 / 78 mm Servo Motor: 5 kW Repeatability: 0.01 mm Max. Opening: +100 mm Max. Feed Channel: 45 mm Max. Closing Speed: 80 mm/s Max. Opening Speed: 80 mm/s Max. Crimping Speed: 10 mm/s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 – Omron Touchscreen

Sąlyga: naujas, Slėgis: 30 t Eiga: 400 mm Atstumas tarp stulpų išilgai/šonuose: 740 x 300 mm Montavimo aukštis: 900 mm Talpa: 6,5 l Žemėjimo greitis nuo 7,5 mm/s Kylimo greitis iki 12,5 mm/s Variklio galia: 2,2 kW Įrenginio svoris: apie 0,6 t Užimamas plotas: apie 1,35 x 0,85 x 2,1 m Aukštos kokybės hidraulinė presas, gali būti valdoma rankiniu arba motorizuotu būdu. Cilindrai gali būti paslenkami į šoną. Lrsdpfsitt S Tex Af Iog Saugos vožtuvas cilindro galinėje padėtyje. CE žymėjimas

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, mašinos/transporto priemonės numeris: NEBR-4397, Here are the technical specifications of the offered machine: If the press does not exactly match your requirements, please request a customized offer tailored to your needs with just one click: Contact us for a tailored quotation. HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! ##### Technical Details Press force: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Oil tank: 10 l Robust machine body with solid welded steel construction, manufactured in accordance with DIN 8651 ##### Additional Information Low-maintenance and reliable due to sturdy engineering Cylinder features induction hardening and chrome plating Steel grade: Structural steel LCG ASTM A36 4 support feet with M30 holes for floor anchoring ##### Equipment / Features 1.5 T rotary punch attachment, mechanical, with locking device, spline shaft, and brake, and 220 mm travel Hydraulic hand pump, max. 15 T pressure and 160 mm stroke, with return spring Throat depth (back wall to center of tool holder): 280 mm Assembly table can be swiveled 180 degrees to the right, with 60 mm center hole, M12 T-slots Daylight opening between swing table and ram/rotary punch guide: 450 mm Daylight opening up to optional insert table: 650 mm and 800 mm Insert table with center hole, 60 mm, insertable, M12 T-slots, size 270x200 mm Height of the base with two storage compartments for insert table: 750 mm At the cylinder, a hardened pressure plate, 10 mm larger diameter than the cylinder Lrodpfefhcc Iox Af Isg Tool holder in cylinder head: M30 Pump lever operates downward Oil tank for 10 L hydraulic oil AW 46 Machine body finish: Blue, RAL 5012, textured paint Attachment finish: Anthracite, RAL 7021 Hydraulic single-column combination press, special model, 15 tons, manual operation (C-frame press, hydraulic press) ##### Looking for a custom-fit machine? Contact us for your individualized offer. Our hydraulic presses are manufactured in compliance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses surpass Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which is based on these standards. Our core competence is special-purpose machine construction and press automation. We offer made-to-measure hydraulic presses, press brakes, and guillotine shears at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Sąlyga: geras (naudotas), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Approach speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Lsdpfx Aswp Nv Hef Ijrg Power 22.5 kW Approximate Dimensions Length 2,150 mm Width 1,250 mm Height 3,600 mm Weight 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend you verify all important details.