Vienos kolonos presas - hidraulinis

DUNKES HZ 40 (CE)

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas),

Sąlyga: naudotas, Gamybos metai: 1996, Charge volume: 135 liters Outer container diameter: 1220 mm Container diameter / container height: 1,220 / 1,035 mm Working basin width: 304 mm Motor output: 0.75 kW Motor speed: 1,500 rpm Operating voltage: 400 V Machine weight: approx. 600 kg Space requirement: approx. 1.38 x 1.28 x 1.04 m Vibratory finishing machine Gsdpewcg Erofx Abdjbg - Factory No.: 15772 / 96-08 - Machine ON: 44,854 h - with drum heating

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Gbodpjcubatsfx Abdeg Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Gamybos metai: 2022, Sąlyga: naujas,

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Gedpjfxyhfefx Abdobg Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Gbjdpjcp Apyofx Abdeg Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Gamybos metai: 2020, Sąlyga: naujas, Oxygen and temperature measurement in molten metals Gbjdpfx Aegqr A Dobdeg

Sąlyga: naudotas, Gamybos metai: 2004, Pressure 630 t Stroke 800 mm Upright distance 2600 mm Distance table/ram, max. stroke up, adj. up 1500 mm Table surface 2500 x 1300 mm Cushion pressure in table 300 t Cushion stroke in table 300 mm Gbodev Svaropfx Abdjg Ram surface 2500 x 1300 mm Side frame opening 1040 mm Speed down 600 mm/s Speed up 360 mm/s Working speed 14 - 42 mm/s Drive power 145.0 kW Weight 85.0 t Space requirement (W x D x H) 4.2 x 4.0 x 7.8 m Height above ground 6.80 m Height below ground 1.0 m Demonstration machine from technical university with approx. 920 operating hours! As-new condition! Certified for manual loading operations according to CE standard. Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, upper and lower stroke limitation, front and rear light curtain (Sick), hydraulic cushion in the table incl. ejector function, hydraulic shock absorption for cutting, mechanical depth stop via 4 motorized adjustable spindles, hydraulic ram locking, two-hand operation, 2 die change consoles, 4 hydraulically operated ball roll rails in the table, 4 vibration isolators.

Sąlyga: naujas, Gamybos metai: 2025, SHAVING MACHINE, brand KÄLIN Hobeltechnik, model MPC-P: • Approximate production of wet shavings: 3,800 kg/hour • Log carriage dimensions: 2,800mm x 1,100mm x 1,300mm • Maximum log length: 2,650mm • 2 symmetrical and removable cutter heads, each 1,140mm, divided into 3 sections: - Diameter: 200mm - Length: 380mm - Number of knives: 8 - Complete cutter heads can be sharpened without removing the knives SUPER-FAST CUTTER HEAD CHANGE – less than 15 minutes! Gbjdpfxovk Saxs Abdog • 2 extra sets of cutter heads for substitution during sharpening • Cutter head motor power: 90 kW / 120 HP • Carriage speed controlled by ELECTRONIC INVERTER: 0.6 to 36 m/min • Automatic control of the feed-load ratio • 1 feed drive motor, double heavy-duty chain traction: 15 kW / 20 HP • Material level control system in the carriage to prevent running empty • Main electrical panel and control panel with touchscreen functions • Lower motorized conveyor for shavings removal: 5,000 mm x 800 mm • Weight: 11,000 kg • CE compliant

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Hidraulinės rąstų kopėčios, skirtos rąstams, kurių skersmuo nuo 7 cm iki 66 cm. Godpjv N Eiqjfx Abdobg