Plantec Uk 600 Ha pirkti naudotą (27 713)

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (also suitable for solid materials to a limited extent). The machine stands out due to its simple operation and quick, convenient material changeover. With this machine, only 90° cuts are possible! The saw feed is automatic via push-button, and material clamping is achieved with two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! The saw is also equipped with connections for a chip extraction system. Optionally, the machine can be fitted with a digital mitre angle display, a scoring laser, and pneumatic lifting for the safety guard! Features • Large support table, powerful drive motor • Two-button control for triggering the cut (optionally available with one-button control) • User-friendly control panel • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic saw blade lift with oil level indicator • Fixed material fence can be repositioned to increase cutting capacity • Large safety guard covering the entire working area • Minimum quantity lubrication system with 2-liter reservoir • Adjustable blade and cutting feed rate • Air gun for cleaning the machine • Saw blade diameter: 600 mm Operating Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the Start button – the machine is now ready 7. Press and hold both SAW buttons to make the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Release the clamp and remove or reposition the material Iiedpfx Anepa Nxdogjg Technical data such as cutting range, power output, etc. can be found in the data sheet attached via email. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a certain extent). The machine is characterized by its user-friendly operation, fast and convenient material change, as well as easy mitre angle adjustment. The UK-600 A features a steplessly adjustable mitre range to the left and right up to 20° (swivel range twice 70°). The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic lift for the safety guard! Equipment • Precision under-table circular saw • Infinitely adjustable mitre settings at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic vertical clamps • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device - chip extraction system • Spray mist system for air-oil cooling Iodpfxsgwt S Ej Angjig • Air gun with coiled hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade diameter 600 mm Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, while the NC control system automatically positions it. Clamping and sawing are then triggered. The positions are pre-programmed into the program control system. Once the machining is completed, the machine automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired unit at our production/demo hall at any time. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, slėgis: 6 juosta, The semi-automatic circular saw UK-600-A is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine stands out due to its user-friendly operation, fast and convenient material changes, as well as easy mitre angle adjustment. The UK-600 A features an infinitely adjustable mitre range of up to 20° left and right (swivel range of two times 70°). Saw blade feed is automatic via push button, and the material is clamped using two pneumatically operated vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimal quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment • Precision under-table circular saw • Mitre adjustment 0º/ 45º/ 90º/ -45º / -60º, stepless • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control Ijdsgcbwgopfx Angsig • Adjustable material stop (rear) • Extraction device—chip extraction system • Mist lubrication device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! You are welcome to inspect the desired system at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an upcut machine, primarily used for cutting profile materials made from aluminium castings, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its user-friendly operation and quick, convenient material change as well as easy mitre angle adjustment. The UK 352 HA offers a steplessly adjustable mitre range from 45° to the left up to 0° to the right. Saw feed is automatic at the push of a button, and material clamping is performed via two pneumatically operated vertical clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning are included as standard! The machine also features connections for a chip extraction unit. Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – for chip extraction unit • Mist lubrication system for air-oil cooling • Air pistol with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel Iiodpfx Ansgwt Rysgeg • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine predominantly used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material with certain limitations). The machine stands out due to its user-friendly operation, quick and effortless material changes, and simple mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button, while material clamping is accomplished via two pneumatically controlled vertical clamping cylinders. The standard equipment for this machine includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are also provided. Iiedpfxjgwt Rre Angeg Features • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right 45º • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction unit—chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Maximum cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the delivery! You are welcome to inspect the desired machine at any time in our production/demo hall. Please do not hesitate to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by easy operation, quick and convenient material changes, and simple miter angle adjustment. The UK 650 HA features a steplessly adjustable miter range of up to 20° left and right (swivel range twice 70°). Saw feed is automatic at the push of a button, and material clamping is achieved via two pneumatically controlled vertical and horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are available. Additionally, this machine can be optionally equipped with a digital miter angle display, a laser marking system, and pneumatic hood lifting. Features: - Double miter 20°–90°–20°, large support table - Powerful drive motor - Two-button control to initiate the cutting process (single-button control also available) - User-friendly control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic blade lifting with oil level indicator - Fixed material stop can be moved back to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade Ø 650 mm Working Process: 1. Set the cutting angle Iijdpfx Ajidun Djngeg 2. Insert the material 3. Adjust the stroke speed 4. Bring the clamping cylinders within 20 mm of the material 5. Clamp material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to perform the cut 8. After cycle completion, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance material You are welcome to visit our production/showroom to inspect the desired system at any time. Feel free to contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (also suitable for solid material to a limited extent). The machine stands out for its ease of use and quick, convenient material changeover as well as simple miter angle adjustment. The UK 352 HA features a continuously adjustable miter range from 45° left to 0° right. Saw feed is automatic via push-button, with material clamping provided by two pneumatically operated vertical clamping cylinders. As standard, this machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Features • Precision under-table circular saw • Miter adjustment: 45º left / 90º / 45º right • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade size: 350 mm • Saw blade not included in delivery! Iodpfegwt Rvox Angeig You are welcome to inspect the desired machine at any time in our production/demonstration hall. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 500 HA is an 'upcut' machine and is primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine is characterized by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 500 HA offers a continuously adjustable miter range from 30° left to 0° right. The saw feed is automated and activated by push button, while material clamping is handled by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, the machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction unit are also provided. Iedpfx Ajgwt R Djngoig Equipment • Precision under-table circular saw • Continuously adjustable miter adjustment: 0º/ 45º/ 90º/ -45º / -60º • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device interface • Air-oil mist lubrication system • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 180 mm • Saw blade: 500 mm • Saw blade not included in scope of delivery! You are welcome to inspect the machine at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and rigid plastics (to a certain extent, also solid materials). The machine stands out due to its user-friendly operation, quick and convenient material changes, and easy adjustment of mitre angles. The UK 800 HA features a steplessly adjustable mitre range to the left and right up to 20° (swivel range 2 × 70°). Saw feed is automatic at the push of a button, and material clamping is achieved by two pneumatically operated vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment Iiedpfsidun Isx Angjg - Double mitre 20° – 90° – 20°, large support table - Powerful drive motor - Two-button control to trigger the sawing operation (optionally also available with single-button control) - Clearly arranged control panel - Adjustable blade and cutting feed - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be shifted rearwards to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter 800 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust lifting speed 4. Bring the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button. 7. Press and hold both SAW buttons; the material is cut. 8. After the cycle is complete, release both SAW buttons and press the STOP button 9. Open the clamping jaws and remove or reposition the material. You are welcome to view the desired system at our manufacturing/demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its easy operation, quick and convenient material changeover, and straightforward mitre angle adjustment. The UK-400 A offers a continuously adjustable mitre range to the left and right up to 20° (swiveling range of two times 70°). The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. Standard equipment for this machine includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! The unit is equipped with connections for a chip extraction system. Optionally, this machine can be fitted with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the safety guard. Features • Precision under-table circular saw • Continuously adjustable mitre setting 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed Isdsgwt Rnjpfx Angeig • Two-hand safety control • Adjustable rear material stop • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 130mm • Saw blade 400mm • Saw blade not included! You are welcome to arrange a viewing of the desired machine at our production/showroom facility at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naudotas, Gamybos metai: 2011, Parduodamas vertikalus apdirbimo centras: Gamintojas: AGIE MIKRON / GF AgieCharmilles Modelis: HPM 600 HD Pagaminimo metai: 2011 Valdymo sistema: HEIDENHAIN iTNC 530 Techniniai duomenys / įranga: Eismo diapazonai X/Y/Z: 600 / 600 / 500 mm Veleno greitis: iki 20 000 aps./min. Įrankių laikiklis: HSK-A 63 Įrankių keitiklis: 60 vietų Maks. įrankio skersmuo: 80 mm Maks. įrankio ilgis: 300 mm Iiedpfx Anozk Erkegsg Maks. įrankio svoris: 6,5 kg Maks. apdirbamo detalės svoris: 500 kg Pašarvas X/Y/Z: 40 / 40 / 30 m/min. Stalas reguliuojamas laipsniais Drožlių transportavimo įrenginys Aušinimo skysčio tiekimo sistema Matmenys: apytiksliai 3 500 x 2 350 x 3 050 mm Svoris: apytiksliai 9 500 kg Pasak operatoriaus, mašina yra labai geros būklės, naudota. Apžiūra galima po susitarimo. ____ Pasiliekame teisę parduoti mašiną anksčiau ir atsakomybės už klaidas techniniuose duomenyse nesiimame. Techniniai duomenys buvo sudaryti, vadovaujantis geriausiomis žiniomis, tačiau jie neatspindi garantuojamų savybių. Taiko mūsų bendrosios sąlygos, be to, pardavėjas neatsako už spausdinimo ar duomenų perdavimo klaidas. Parduodamų prekių išvaizda atitinka jų amžių ir pateiktas nuotraukas. Parduodamų prekių techninė būklė ir nusidėvėjimas atitinka jų amžių. Naudotos mašinos parduodamos tik verslo subjekrams ir be garantijos.

Gamybos metai: 2023, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N.A., Unused CIC 600 overturning basket centrifuge made of Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, but, along with much other equipment, this unit has never been put into operation. The centrifuge features a drum diameter of 600 mm, with a nominal capacity of 52 liters or 65 kg, maximum drum speed of 1,940 rpm, maximum centrifugal acceleration 1,260 (g). The housing material is 1.4571, and all product-contact components are made of 2.4602, identical to those used in Heinkel centrifuges. Scope of delivery: a) CIC 600 overturning basket centrifuge b) Mounting frame c) CIP system integrated into the mainsystem d) Quick-release front housing, toolset included e) Inertisation pressure monitoring integrated into the main system f) Discharge fitting for solids Iisdpfx Ansyffr Uogsg g) Flooding function h) Washing template including coating Technical details will be provided on request. Please contact us for a written quotation as well. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH, ensuring all work is carried out to the highest professional standards. For further questions or to get in touch, please contact us at any time. We look forward to hearing from you. Cycron GmbH, Switzerland

Būklė: naudotas, Gamybos metai: 2015, - Padavimo greitis: maksimaliai 40 m/min. - Variklio galia: 5,5 kW - Darbinis ilgis: 7,35 metro Diskinis pjūklas Gamintojas: Tigerstop Tipas: UKA 600 Pagaminimo metai: 2015 „Tiger UKA 600“ pjovimo linija susideda iš: „Tiger Stop 7.5“ – automatinis padavimas ir stabdys Bendras ilgis: 7,95 metro Darbinis ilgis: 7,35 metro Grynasis darbinis ilgis (automatinis pjūklas): 6 metrai Įtampa: 220 voltų, 50 Hz Variklio galia: 0,45 kW Padavimo greitis: maksimaliai 40 m/min. (priklausomai nuo apkrovos) Tikslumas: +/- 0,4 mm, nurodant poslinkį. Padavimo stalas „TigerStop 6.8“ Bendras ilgis: 7,4 metro Stalo plotis: 325 mm Vertikalaus judesio kampinis pjūklas, modelis UKA 600, su pneumatiniu judesiu ir įtempimo įtaisu Pjovimo galvutė, sumontuota ant besisukančio stalo, skersmuo: 980 mm Pjovimo disko skersmuo: 600 mm Pjovimo našumas: 165 x 240 mm, 90 laipsnių kampu Maksimalus pjovimo aukštis: 165 mm prie atramos ir 175 mm skersmuo (esant 90 laipsnių kampui) apvaliam medžiagoms Pjovimo kampas: 30 - 90 - 30 laipsnių 45 - 90 - 45 laipsnių, su automatine funkcija Variklio galia: 5,5 kW Įtampa: 400 voltų, 50 Hz Darbinis aukštis: 920 mm Mašina valdoma paspaudžiant mygtuką, kad būtų užtikrintas pusiau automatinis režimas, arba visiškai automatinis režimas, skirtas 90 laipsnių kampui, per „TigerStop“. Besisukantį stalą valdo „Tigerstop Servo“ pavara „TigerDrive“ Padavimo / išėmimo stalas su šoninėmis apsaugomis Ilgis: 3,7 metro Plotis: 325 mm PC valdymas su „Beamworks“ programa, kompiuteris su jutikliniu ekranu ir kompiuterinis spinta, galimybė atsisiųsti pjovimo sąrašą į .csv failą. Papildoma 6 srautų „Flipper“ pakrovimo įranga Skirta automatiniam medžiagos pakrovimui, kurios ilgis yra 500–6000 mm. Trumpesnes detales galima tiesiogiai dėti ant padavimo stalo Pakrovimo įranga susideda iš: 6 „Flipper“ strypai su stalais, įskaitant 2 aliuminio profilius, 80 x 40 mm kiekvienam strypui, „Flipper“ įtaisus, jungiamąjį vamzdį, 1 pneumatinį cilindrą su 24 voltų vožtuvu. Grynasis pakrovimo ilgis yra apie 1,38 m. 1 papildomas atraminis strypas be „Flipper“ įtaiso, esantis pakrovimo įrangos išorėje 2 papildomi cilindrų rinkiniai pakrovimo įrangai Visa elektrinė valdymo spinta su PLC, maitinimo šaltiniu, avarinės išjungimo saugos relė, visa elektros instaliacija ir kt. Iiedpjzuyx Hefx Angsg (Įskaitant papildomą elektros instaliaciją saugos tvoros durelėms) Etiketės spausdintuvas, skirtas „Beamworks“ programai Saugos tvora mašinos gale, tik padavimo pusėje. Įskaitant įėjimo duris su saugos užraktu Ir papildoma apsaugos priemonė mašinos priekyje, kad būtų užkirstas kelias įsiskverbimui tarp pakrovimo srautų. Produkto ilgio matavimas su jutikliu apsauginėje gaubtoje, valdomas „Tigerstop“ valdymo sistemos. Ilgių matavimas ir atsisiuntimas naudojant „Tigerlink“ veikia tik esant 90 laipsnių kampams „Tigerlink“ atsisiuntimo programinė įranga, skirta .csv failui (pjovimo sąrašas) atsisiųsti. Pastaba: Techninės specifikacijos ir aprašymai yra nukopijuoti iš to meto užsakymo patvirtinimo. Duomenys pateikiami informaciniu tikslu ir yra neįpareigojantys.

Būklė: geras (naudotas), Gamybos metai: 2008, Colchester Harrison Alpha 1400U CNC Lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety enclosure, 100L coolant tank and pump, fully extendable chip tray, machine lighting Turning length: 1250 mm Swing diameter: 400 mm Distance between centers: 1250 mm Spindle bore: 54 mm Turret, number of tool stations: 8 Tool size: Iisdpjrnkdysfx Angog Standard: 20 x 20 mm Boring bar: 32 mm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis 600 mm Iiedpfx Answgal Hegog du varikliai po 4 kW sklandus padavimo greičio reguliavimas nuo 4 iki 12 m/min šepečių apsukos 1000 aps./min maksimalus medžiagos aukštis 300 mm padavimo variklio galia 0,55 kW

Gamybos metai: 2019, veikimo valandos: 5 500 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, The system must be collected by 26/05/23 – placing a bid obligates the buyer to dismantle and collect the equipment within the specified timeframe. TECHNICAL DETAILS: Max. workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1,000 kg Travel paths: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Iiodpfxsk H D Hao Angog Control system: Fanuc 31i –WB Installation dimensions: 2,440 x 2,680 mm Operating hours: 5,500 hrs.

Būklė: naujas, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600x400 mm Saw blade length: 5320x34x1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirements: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre left & right 60° • Frequency-controlled saw drive • 34 mm band height • Wear-free, ball-bearing material support turntable • Saw blade guides can be positioned on extra-wide linear guides • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable swarf tray (for cleaning) • Free-standing, safe and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast clamping (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range (round) from 10 mm Iiedpfx Anjupxupsgsg Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering to material start, or in series cuts, begin cutting immediately 4. Stop saw blade 5. Raise frame just above material 6. Open vice

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 900 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 395.900.219.1159, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, bendras aukštis: 2 700 mm, stalo ilgis: 800 mm, bendras svoris: 4 150 kg, GF AgieCharmilles FORM E 600 – EDM, naudojant formą Pagaminimo metai: 2019 Eksploatavimo laikas: apie 900 val. Įranga yra puikios būklės ir visiškai funkcionuoja. Ji buvo naudojama tik ribotam skaičiui bandymų ir bandomųjų operacijų, o ne nuolatinei serijinei gamybai. Techninės specifikacijos: X ašies judėjimas: 600 mm Y ašies judėjimas: 400 mm Z ašies judėjimas: 400 mm Stalo matmenys: 800 x 600 mm Maksimalus apdirbamo detalės dydis: 1000 x 700 x 400 mm Maksimalus apdirbamo detalės svoris: 1000 kg Padėties tikslumas: 0,1 μm Geriausias paviršiaus apdailos lygis: Ra 0,2 μm Generatoriaus srovė: 140 A Iodpfozyn E Ejx Angoig Dielektrinio skysčio talpa: 650 l Integruota C ašis Maksimalus elektrodo svoris ant C ašies: 25 kg Maksimalus C ašies sukimosi greitis: 80 aps./min. AC FORM HMI su 19 colių jutikliniu ekranu ISPG (išmanusis greičio ir galios generatorius) Stiklinės skalės X/Y ašyse Automatinis EROWA ITS-50 griebtuvas Elektrodų keitiklis Apsaugos nuo gaisro sistema 6 integruoti filtrai Maitinimas: 3 x 400 V, 50/60 Hz Suspaustas oras: 6–8 bar LAN jungtis: 10/100 Mbit/s Įrangos matmenys / svoris: Įrangos aukštis: 2700 mm Įrangos svoris: apie 4150 kg Šiuo metu įranga yra mūsų įmonėje Kočaelio mieste, Turkijoje, ir ją galima apžiūrėti. Papildomos nuotraukos, vaizdo įrašai ir išsami informacija teikiami gavus užklausą.

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid material cutting is possible to a limited extent). This machine is characterized by its user-friendly operation, rapid and convenient material changeover, and easy adjustment of the mitre angle. The UK 352 P features a steplessly adjustable mitre range from 45° left to 0° right. The saw feed is initiated automatically at the press of a button, and material clamping is performed by two pneumatically controlled vertical clamping cylinders. As standard, this machine is equipped with a minimum-quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are also present. Features - Manual guidance of the saw blade - Dual mitre setting 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly arranged control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be shifted rearwards to increase cutting capacity - Large safety cover, encloses the entire working area - Minimum-quantity lubrication system - Air gun for cleaning the machine - Saw blade ø 350 mm Operational Sequence 1) Set the cutting angle 2) Insert the material 3) Move the clamping cylinder to within 20 mm of the material 4) Pneumatically clamp the material 5) Press the start button to rotate the saw blade 6) The cutting operation must be carried out manually via the hand lever 7) After the cut is complete, switch off the machine Iisdjidunvopfx Angeg You are welcome to visit our production/showroom at any time to inspect the selected machine in operation. Please do not hesitate to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an upcut machine, primarily used for individual cuts in aluminum and copper profiles as well as hard plastics (limited to solid material). This machine is characterized by its user-friendly operation, quick and convenient material changes, and easy mitre angle adjustment. The UK 352 M offers a steplessly adjustable mitre range—left up to 45° and right up to 0°. Saw feed is performed manually via a hand lever, and the material is clamped manually. Equipment - Double mitre 45° – 90° – 0° - Large support table - Powerful drive motor - Clearly arranged control panel - One manual clamping cylinder Iedpfx Ajidunnjngoig - Fixed material stop can be moved towards the rear to increase cutting capacity - Large safety guard covering the entire working area - Saw blade ø 350 mm Operating Sequence 1) Adjust the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to activate the saw blade 5) Perform the sawing cut manually using the hand lever 6) After the cut, switch off the machine! You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please do not hesitate to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Šiame pasiūlyme galite įsigyti naudotą didelio formato skaitytuvą „WideTek-36-600“. Parduodamas daiktas: 1 vnt. „WideTek-36-600“ skaitytuvas Būklė: Šis pasiūlymas yra dėl naudoto įrenginio, kuriame gali būti matomi naudojimo ženklai (nedideli įbrėžimai arba pageltę vietos). Įrenginys buvo išbandytas ir veikia. Bandomasis atspausdintas vaizdas matomas nuotraukoje. Pakavimas ir siuntimas: Norėdami, galite apžiūrėti įrenginį mūsų darbo valandomis. Prašome susitarti dėl laiko! Iiodjz A Axcepfx Angog Galimas patvarus pakavimas ir siuntimas į bet kurį pasaulio kampelį pagal užsakymą! Prieš siunčiant arba atiduodant, jūsų patogumui, įrenginio veikimo testas bus įrašytas vaizdo įraše. Norėdami gauti daugiau informacijos, galite susisiekti su mumis asmeniškai.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, CNC apdirbimo centras MAHO MH 600 C – veikiantis, prijungtas prie elektros tinklo Parduodamas MAHO AG (Vokietija) CNC apdirbimo centras MAHO MH 600 C. Šis įrenginys buvo naudojamas gamyboje ir veikė iki pat paskutiniųjų dienų. Jis yra visiškai veikiantis ir gali būti demonstruojamas prijungtas prie elektros tinklo. Valdymo sistema: Grundig / Philips CNC 532 Serijos numeris: 661999 Įranga: • CNC valdymo sistema Philips / Grundig 532 • Automatinis įrankių keitiklis (30 vietų) • Sukamas stalas (4-oji ašis) • Aušinimo sistema • Visas gaubtas Techniniai duomenys: • X ašis: 600 mm • Y ašis: 450 mm • Z ašis: 450 mm • Įrankių laikiklis: SK40 • Veleno greitis: iki apytiksliai 6300 aps./min. • Įrankių žurnalas: 30 vietų • Įrenginio svoris: apytiksliai 3,6 t Būklė: • Visiškai veikiantis • Paskutiniu metu naudotas gamyboje • Galima apžiūra prijungus prie elektros tinklo Iiodpszgcifefx Angjg Informacija apie techninę būklę Šiuo metu įrenginys kartais naudojamas mūsų įrangos parke, ir iš esmės yra paruoštas darbui. Tačiau mes labai vertiname skaidrumą ir norime atkreipti dėmesį į tai, kad CNC valdymo sistemos programinė įranga kartais gali užstrigti. Todėl turėtų būti numatyta, kad gali prireikti diagnostikos, priežiūros ar remonto darbų. Štai kodėl šis įrenginys ypač tinka pirkėjams, turintiems patirties CNC staklių priežiūroje, priežiūros įmonėms arba kaip vertingas atsarginių dalių šaltinis. Žinoma, ši techninė būklė atsispindi ir patrauklioje pardavimo kainoje. Įrenginys parduodamas esamoje būklėje (kaip apžiūrėtas). Kviečiame visus susidomėjusius asmenis atvykti į mūsų įmonę apžiūrėti įrenginio prieš perkant ir išbandyti jį veikiant. Mielai demonstruosime įrenginį ir atsakysime į visus klausimus. Pardavimo priežastis nėra įrenginio veikimo pabaiga, o mūsų įrangos parko modernizavimas ir naujo apdirbimo centro įsigijimas.

Būklė: naudotas, tinka termiškai alyvos šildymui (180 kW) Maksimali kepimo temperatūra 220-250 °C reguliuojama temperatūra sklandžiai reguliuojamas greitis vėžės plotis 600 mm Dangtis su elektriniu kėlimo įtaisu Ijdpfx Aez Az Dusngsig tinka garų injekcijai (šildymas, produkto išeiga) 400V-50 Hz-42A Matmenys (I x P x A): ± 10.000 x 2.000 x 2.700 mm min. kepimo laikas: 4 min maks. kepimo laikas: 60 min

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 750 kg, rotoriaus skersmuo: 250 mm, rotoriaus ilgis: 600 mm, galia: 30 kW (40,79 AG), Išankstinis smulkintuvas: 1 vnt. „Forrec AE 600/30“ vieno veleno smulkintuvas: – Pavara: 30 kW – Matmenys: 2 250 x 3 050 x 1 600 mm – Rotoriaus skersmuo: Ø 250 mm – Bunkerio matmenys: 1100 x 1000 mm Iijdpeztaurjfx Angjg – Bunkerio talpa: 750 litrų – Gamybos našumas: 600 kg/val. (mišrūs kabeliai) – Svoris: 1750 kg – 1 komplektas originalių „Forrec“ atsarginių dalių Priedai: – Elektrinis pakeliamas stalas medžiagai tiekti – Transportavimo konvejeris smulkintos medžiagos iškrovimui – Metalinė platforma medžiagai tiekti Mašina išmontuota ir sandėliuota. Todėl negalima atlikti funkcionalumo testo. Galimas tik atsiėmimas adresu: 14727 Premnitz.

Būklė: naudotas, Gamybos metai: 2012, Horizon vienlapis lankų paruošimo bokštas VAC-600Ha, naudotas Šis naudotas Horizon VAC-600Ha yra našus vienlapis lankų paruošimo bokštas, kuris yra modulinės brošiūrų gamybos sistemos dalis. VAC-600Ha gali būti naudojamas kaip savarankiškas įrenginys arba kaip didesnės brošiūrų gamybos linijos dalis, todėl tai universalus sprendimas spaustuvėms ir knygrišykloms. Svarbiausios savybės: Techninės specifikacijos * Didžiausias popieriaus formatas: 500 x 350 mm * Mažiausias popieriaus formatas: 148 x 120 mm * Įkrovimo talpa: 130 mm kiekvienoje stotyje * Greitis: iki 9 500 ciklų per valandą * Matmenys: 810 x 652 x 1 961 mm * Svoris: 324 kg vienam bokštui * Maitinimas: 230 V, 10,6 A, 2,3 kW Funkcijos ir privalumai * Modulinė konstrukcija: galima plėsti nuo 6 iki 36 stočių * Vertikali, vietą taupanti konstrukcija * Dvigubas ciklo režimas nenutrūkstamam darbui * Kiekvienos stoties individualus oro tiekimas užtikrina saugų popieriaus paėmimą * Reguliuojami parametrai: persidengimas, greitis, siurbimo ir pūtimo oras * Tinka įvairių rūšių, įskaitant sudėtingas, popieriaus apdorojimui * Suderinama su kitomis Horizon sistemomis, tokiomis kaip iCE Stitcher SPF-2000 Iiedszhlt Aepfx Angjg Pilnas paslaugų paketas Rūpinamės viskuo: nuo saugaus supakavimo ir transportavimo iki muitinės formalumų. Pageidaujant, galime pateikti individualų lizingo pasiūlymą. Tvaru ir ekonomiška Pasirinkite naudotą įrenginį ir laimėkite dvigubai: saugokite aplinką ir taupykite biudžetą. Nepaisant galimų naudojimo žymių, gausite kokybišką produktą už patrauklią kainą.