Pusiau automatinis aliuminio diskinis pjūklas

Plantec UK 600 HA

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (also suitable for solid materials to a limited extent). The machine stands out due to its simple operation and quick, convenient material changeover. With this machine, only 90° cuts are possible! The saw feed is automatic via push-button, and material clamping is achieved with two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! The saw is also equipped with connections for a chip extraction system. Optionally, the machine can be fitted with a digital mitre angle display, a scoring laser, and pneumatic lifting for the safety guard! Features • Large support table, powerful drive motor • Two-button control for triggering the cut (optionally available with one-button control) Fpedpfx Aspa Nxdsfqsl • User-friendly control panel • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic saw blade lift with oil level indicator • Fixed material fence can be repositioned to increase cutting capacity • Large safety guard covering the entire working area • Minimum quantity lubrication system with 2-liter reservoir • Adjustable blade and cutting feed rate • Air gun for cleaning the machine • Saw blade diameter: 600 mm Operating Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the Start button – the machine is now ready 7. Press and hold both SAW buttons to make the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Release the clamp and remove or reposition the material Technical data such as cutting range, power output, etc. can be found in the data sheet attached via email. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2025, pjūklo disko skersmuo: 400 mm, – 400 mm pjūklo diskas – Dviguba įstrižainė – 2 pneumatiniai spaustuvai – Rūko tepimo sistema Fedpfegg N Drox Afqjpl – Pūstuvo pistoletas – Apsauginis dangtis – Dokumentacija – 400 V

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a certain extent). The machine is characterized by its user-friendly operation, fast and convenient material change, as well as easy mitre angle adjustment. The UK-600 A features a steplessly adjustable mitre range to the left and right up to 20° (swivel range twice 70°). The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic lift for the safety guard! Equipment • Precision under-table circular saw • Infinitely adjustable mitre settings at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic vertical clamps • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device - chip extraction system • Spray mist system for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade diameter 600 mm Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, while the NC control system automatically positions it. Clamping and sawing are then triggered. The positions are pre-programmed into the program control system. Once the machining is completed, the machine automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. Fpedogwt S Eepfx Afqel You are welcome to visit and inspect the desired unit at our production/demo hall at any time. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: SÇ 402 Alttan Çıkma Kesim Makinası, Funkcionalumas: visiškai funkcionalus, • Atitinka CE standartus. • Naudojama aliuminio PVC profilių pjovimui. Fpsdpfxorahzgs Afqsl • Hidropneumatinis pjovimo procesas. • Galima reguliuoti pjovimo greitį pagal profilį. • Gali pjauti pastoviais kampais į dešinę ir kairę: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 laipsnių. • Pneumatinis vertikalus ir horizontalus presas. • Ø550 mm deimantinio galandimo aliuminio pjūklas. • Yra volelinis konvejeris (po 3 m iš dešinės ir kairės). • Alyvos purškimo sistema. • Didelio tikslumo pjovimas su 3 kW varikliu ir Hydro-check sistema. • Naudojama su skaitmeniniu metru.

Būklė: beveik kaip naujas (parodų įrenginys), COMPLETE DOUBLE-SIDED EDGE BANDING AND PANEL SIZING LINE. The line consists of the following machines: VZ0200A) Automatic loading station with double loading platform "BARGSTEDT" Model TBH 500/D/30/12 VZ0200B) 1st double-sided edge banding and panel sizing machine "HOMAG" Model KFL 525/8/A3/15 VZ0200C) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDL 310/30/12 Fedjdt Rgvepfx Afqepl VZ0200D) 2nd double-sided edge banding and panel sizing machine "HOMAG" Model KFL 526/10/A3/30 VZ0200E) Rotation station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm Fpjdpfxeuiy Hro Afqsl After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naujas, Gamybos metai: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material passage height: 0 - 100 mm Speed: 22 m/min Fodeu I R Utepfx Afqjpl Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrical connection: 400 V / 50 Hz / 3-phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea formaldehyde (UF), and polyurethane adhesives, suitable for various material types such as MDF, multiplex, chipboard, composite panels, and gypsum plasterboards. This type of glue application machine allows precise and homogeneous dosing of adhesive, taking into account the roller profile, which must suit the production requirements. The heavy-duty frame and the core of the rollers—which are manufactured thicker than previous models—allow for a high production rate without special issues, enabling bonding of workpieces up to 2,200 mm in width. Roller removal for maintenance is straightforward due to the support system, which can be split in half via a simple bayonet coupling. The machine can be optionally equipped with various accessories such as an electronic speed controller, automatic roller cleaning device, and automatic upper roller lifting system with digital position display. The S4R/P glue application machine is suitable for various production purposes, including in the construction sector and for manufacturing foam panels and mattresses. Features: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400 x 3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400 x 3000 mm, disc rollers, Ø 122 mm, stainless steel Location: Available ex-stock 54634 Bitburg - Immediately available -

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance Fodpfx Afeuiy Ngjqspl - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: naujas, Tubend Aluminum Circular Saw / Underfloor Saw AC 550 Special features included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping blocks Fjdpfx Afjkckx Uoqspl - Saw blade feed infinitely adjustable - Minimum quantity lubrication - 3 m roller conveyor Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 - 8 bar Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), Screw pump Manufacturer: Busch Model: Cobra DS 600 E Condition: Very good Delivery time: ex stock Fpodpfx Aod Rafbjfqjl