Zimmer-Group Lcp2505Ak-08 pirkti naudotą (8 131)

Būklė: labai geros būklės (naudotas), Power Control Control system - CadMAtic 4 Professional software Roller conveyors for loading table feed (mm 32,000) Gusdpfevnq H Ejx Al Ned Lifting table (mm) 5,600 x 2,200 VAC infeed carriage for gentle handling of sensitive single panels using vacuum 1st inserting saw with no. 6 clamping jaws Rotating device (for panels) for 90° rotation 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade projection (mm) 190 Scoring saw (max. saw diameter/power) mm 200 (kW 2.2) Main saw (saw diameter max/power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1 - 130 2nd inserting saw, no. 14 with clamping jaws 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade projection (mm) 190 Scoring saw (max. saw diameter/power) mm 200 (kW 2.2) Main saw (saw diameter max/power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1 - 130 Vibrating chute, chip removal conveyor with automatic cross-cutting unit (kW 19.5) No. 2 front air-cushion tables (+1 additional and more) (mm 800 x 2,160) Rollers with flocked finish for highly sensitive materials Automatic stacking (No. 2 transfer tables: 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Būklė: visiškai atnaujintas (naudotas), PC control Power Control software No. 2 through-feed motorized conveyors No. 2 horizontal drilling supports (digital display of position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Gsdpfjvhcbzox Al Noud No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 50 / 60 (approx.)

Būklė: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 WORKING UNITS: Gusdpfx Alsihfiis Ned Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Būklė: labai geros būklės (naudotas), PANEL DIVIDING SAW ANGLE PLANT Control: CadMAtic 4 Professional Powered roller conveyors (No.) 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Infeed saw with grippers (No.) 4 1st Panel dividing saw max. cutting width (mm) 4300 Max. saw blade protrusion (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Variable saw carriage feed speed (m/min) 1 - 150 2nd Infeed saw with grippers (No.) 8 2nd Panel dividing saw max. cutting width (mm) 2200 Max. saw blade protrusion (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Variable saw carriage feed speed (m/min) 1 - 150 Godopuh Dkjpfx Al Njud Front air cushion tables No. 2 (+ 1 additional and more) Total connected load (kW) 52.6

Būklė: labai geros būklės (naudotas), Panel dividing saw - with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table loading (mm): 3800 x 2200 Rear pusher(s): 1 Gedpfoh Imvhsx Al Noud With clamps: 7 Panel rotation device (for panels) to 90° Max. cutting width (mm): 3800 Useful stroke of the pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. saw diameter / power): 180 mm / 2.2 kW Main saw (max. saw diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (pcs.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Būklė: labai geros būklės (naudotas), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel inserting Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) Gedpfsyhqa Aox Al Neud A) Driven roller conveyor "RBO" with 90° workpiece rotation device B) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool changer, each holding 3 tools Zone B: No. 2 pre-installed locations for mounting No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) No. 2 tool magazines (turret) with 60 positions each for spindles (2 x 60 = total 120) C) Transfer connection with flipper (180° turn, face-down) "RBO" Ribaltatore D) Gantry CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal boring units (1 right + 1 left) with 4 heads each, with 18 spindles per head (36R+36L), total 72 Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, each with 3 positions Zone B: No. 2 pre-set positions for installing No. 2 additional electrospindles No. 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles on Y-axis) No. 2 tool turret magazines with 60 positions each (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit No. 2 horizontal boring units (1 right + 1 left) with 5 insertion nozzles each (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Būklė: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Guedpfx Ajukhd Asl Ned Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Būklė: labai geros būklės (naudotas), YZ0105) PANEL SAW WITHOUT REAR TABLE, Model HPP 300/56/56 PROFILINE Control: Power Control POWER TOUCH, Software: CADmatic 4 - Professional No. 1 Rear Pusher - (PACK PREMIUM). No. 11 Clamping Jaws (1 x Power Concept) Max. Cutting Width (mm): 5600. Usable stroke of the pusher (mm): 5600. Max. Blade Projection (mm): 80 Scoring Saw (max. blade diameter/power): mm 180 / 1.5 kW Main Saw (max. blade diameter/power): mm 350 / 11 kW (option: 18 kW) Adjustable saw carriage feed rate (m/min): 1 - 150 No. 5 Front air cushion tables (mm 500 x 2810) Label printer: PICA II 108 YZ0106) AUTOMATIC PANEL STORAGE SYSTEM Model TFL 211/10/05 Total space requirement (with panel saw): mm 10,640 x mm 55,660 Guodpfx Asfg Ewzol Ned Movable overhead gantry (on X-axis), with movable carriage (on Y-axis) and associated vacuum suction assembly (moveable on Z-axis) Max. speed of the overhead gantry (X-axis): 110 m/min Carriage speed (Y-axis): 130 m/min Vacuum suction assembly movement speed (Z-axis): 70 m/min Vacuum suction assembly, rotatable by 90° Automatic TLF management system (via scanner) for cut panels (which remain in storage) - minimum dimensions: mm 800 x 2000 Stack dimensions Min: mm 2600 x mm 800 / Max: mm 5600 x mm 2200 Panel thickness (min/max): mm 12 / 40 Stack height: mm 1000 Min. panel size: mm 800 x 2000. Max. panel size: mm 2200 x 5600 (ST 61)

Būklė: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: Gjdpjt Ig A Sjfx Al Njud W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Būklė: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 Gujdpfxjivawpj Al Ned No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 20

Būklė: labai geros būklės (naudotas), SINGLE ROLLER COATING MACHINE Max. working width: 1300 mm Machine length: approx. 900 mm Panel thickness (working height): 3 - 80 mm Feed speed adjustable: 4 - 20 m/min Gsdpfx Alogz Swwo Noud PLC control panel Remote control panel separated from the machine body Total connected load: 8 kW Equipped with: 1°) Dosing unit (chrome steel dosing roller, diameter 173 mm, approx. 0.75 kW) 2°) Application unit (rubberized lacquer roller, diameter 250 mm, approx. 0.75 kW) with an opposing rubber supporting roller placed at the top (diameter approx. 182 mm, approx. 0.75 kW)

Būklė: labai geros būklės (naudotas), Flexible CNC-Processing line for drilling, milling, and fitting of hardware. Numerical control system: "TPA Albatros." Comprising: 1) "Igel" loader, with 12 positions (for 12 panels), vertical panel feed. 2) CNC-Boring machine, Pantograph model Over 25.13 with insertion unit (bushings, shelf supports, and base fittings). - 1 working head (approx. 5.5 kW) with turret (10 positions) - 1 drilling head with 24 independent spindles (X-axis) - 1 boring head with 2 independent spindles (Y-axis) - 1 drilling head with 5 independent spindles (Z-axis) - 1 hardware insertion unit (screwing) Guedpfjhvagkox Al Nod - 1 hardware insertion unit (press-fit) - 1 supply and feed hopper 3) Discharge unit (90° transfer) with motorized conveyor for vertical panel outfeed. 4) Discharge unit (0°-90°), with motorized conveyor for bringing the panel from vertical to horizontal position.

Būklė: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 Gujdpfx Ajidmkrol Njd KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien)

Būklė: naujas, Gamybos metai: 2025, Lazerio galia: 30 000 vatų Darbinis lazerio plotas: 8000 x 2500 x 150 mm Pozicionavimo greitis X/Y/Z: 200 m/min sinchroniškai: 280 m/min Maks. ruošinio svoris: 15 000 kg Maks. statybinis plienas: 50 mm Maks. nerūdijantis plienas: 40 mm Maks. aliuminis: 35 mm Maks. varis: 20 mm Maks. žalvaris: 20 mm Gusdexra Rwepfx Al Nod Ilgis: 20 200 mm Plotis: 4150 mm Aukštis: 2620 mm Staklių svoris: 32 500 kg Standartinė komplektacija - hidraulinis keitimo stalas - Fiber šaltinis: Raycus - Pjovimo galva: DNE by Power - Vedinamoji linija: Rexroth - Krumpliastiebis ir reduktorius: Herion M3 / Güdel - Reduktorius: Neugart - Servo pavaros: Yaskawa - PLC aparatinė įranga: Schneider

Būklė: naujas, Gamybos metai: 2025, Laser power: 30,000 Watt Working area (laser operation): 6,000 x 2,500 x 270 mm Positioning speed X/Y/Z: 200 m/min Simultaneous: 280 m/min Max. workpiece weight: 5,500 kg Max. mild steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 16,300 mm Width: 4,150 mm Height: 2,620 mm Machine weight: 25,800 kg Gjdpfxjwcl Ufe Al Njud Standard equipment - Hydraulic shuttle table - Fiber source: Raycus - Cutting head: DNE by Power - Linear guide: Rexroth - Rack and pinion: Herion M3 / Güdel - Reduction gearbox: Neugart - Servo drives: Yaskawa - PLC hardware: Schneider

Būklė: naujas, Gamybos metai: 2025, Laser power: 12,000 watts Working area (laser operation): 4,000 x 2,000 x 270 mm Positioning speed X/Y/Z: 200 m/min Simultaneous speed: 280 m/min Max. workpiece weight: 3,000 kg Max. mild steel thickness: 30 mm Max. stainless steel thickness: 30 mm Max. aluminium thickness: 25 mm Max. copper thickness: 10 mm Max. brass thickness: 20 mm Length: 12,500 mm Width: 3,650 mm Height: 2,620 mm Machine weight: 18,000 kg Standard Equipment Main Components 1. Fiber laser source: D-Soar (_CE&UL) Raycus Gusdpjv Uz Tisfx Al Nod 2. Cutting head: Bystronic DNE (copyrighted) 3. Cutting software: Bus control Hypcut FSCUT 8000C 4. Rack and pinion (X & Y axis): M3 by Herion 5. Exchange table: Parallel shuttle table (two levels) 6. Ball screw: TBI (Taiwan) 7. Guide rail: Won (South Korea) 8. Reduction gear: Neugart (Germany) 9. Servo drive & motor: Inovance or Schneider 10. Machine bed: Welded machine frame 11. PC: I7 CPU, 8GB RAM, 120GB SSD, 10kW 12. Monitor: Capacitive touchscreen (21.5", XC-2209CMDR) 13. Proportional valve: Felton low pressure, 10kW 14. PLC hardware: Schneider 15. Solenoid valve: High pressure: CEME, Low pressure: Airtac 16. Gantry: Aerospace aluminum cutting bridge, formed by steel die casting 17. Chiller: S&A custom 18. Electrical control cabinet: Independent control cabinet (Bystronic DNE copyright) Electrical Connection (Machine incl. Laser Source and Chiller) The voltage supplied by the energy provider must meet EN 50160 and IEC 60364-1 requirements; stable voltage is essential for consistent performance. The power supply must provide constant voltage across the entire tolerance range of the grid and must not experience fluctuations such as those caused by spot welding systems. If such a stable supply cannot be ensured at the installation site, the system must be equipped with a transformer and/or a voltage stabilizer. Machine power supply, incl. laser module: Phases: 3 phases & PE Power system: TN Main frequency: 50/60 Hz Supply voltage: 3 x 380 V Max. permissible voltage fluctuation 50 Hz: ±10% Max. permissible voltage fluctuation 60 Hz: +6%/-13% Fuse: 150 A (time delay) Machine: 9 kW Hydraulic shuttle table: 15 kW Fume extraction: 7.5 kW Resonator: 36 kW Chiller: 15 kW Total power consumption, plant*: 80.5 kW Power factor cos(φ): 0.83 Average power demand: 30.75 kW *Values based on full laser power and ambient temperature of 20°C; average material mix considered. Compressed Air (machine, laser source, chiller, extraction) Compressed air quality must comply with ISO 8573-1:2001. To minimize the risk of contamination from the compressor, an oil-free screw compressor with integrated air treatment (air dryer) is required. Minimum supply pressure at inlet: 20 bar Maximum consumption: 1.05 m³/min Max. compressed air temp. at maintenance unit inlet: 43°C.

Būklė: naujas, Gamybos metai: 2025, Laser power: 30,000 watts Laser operating area: 28,000 x 4,000 mm Positioning accuracy X/Y/Z: 0.1 mm / 10 m Max. workpiece weight: 30,000 kg Max. mild steel: 60 mm Max. stainless steel: 50 mm Gedpfx Aev U A Nxol Nsud Max. aluminium: 40 mm Max. copper: 20 mm Max. brass: 20 mm Length: 35,500 mm Width: 11,000 mm Height: 3,000 mm Machine weight: 45,000 kg Standard equipment: - Fixed machine table - Fiber source: Raycus - Cutting head: DNE by Power - Linear guides: HIWI Taiwan - M3 rack and pinion: Herion / Güdel - Reduction gearbox: Neugart - Servo drives: Yaskawa - PLC hardware: Schneider Additional equipment: Optional with bevel cutting

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 350 mm, ruošinio svoris (maks.): 700 kg, garantijos trukmė: 12 mėnesiai, Precision & stability through robust construction. The static, dynamic, and rigid mechanical design ensures long-term operational stability with high performance. Linear glass scales in X, Y, and Z axes enable exact position detection and minimize measurement errors. Compact & rigid mechanical concept. The short C-design in combination with generously dimensioned cast components guarantees mechanical stability and precision throughout the entire service life of the machine. Thanks to its high robustness, the construction absorbs all machining forces, ensuring a consistently precise spark gap between workpiece and electrode. Key features at a glance: - Manual eroding for spark initiation via hand control with joystick function - High vibration damping thanks to sturdy cast-iron construction - Maximum removal rate and accuracy across all material pairings - Low-wear final dimension tuning - Fully enclosed integrated measuring systems - Fully integrated work area lighting - Automatic central lubrication Height: approx. 2400 mm Width: approx. 2410 mm Godpfx Aeyh Nf Uol Noud Depth: approx. 2270 mm Weight without fluids: approx. 2800 kg Table: Length x Width: 700 x 400 mm Dielectric above table: 350 mm Dielectric filters: 3 cartridge filters Workpiece weight: max. 700 kg Travel path X-Y: 400 x 300 mm Travel path Z: 350 mm Resolution X-Y-Z: 0.001 mm Electrode weight: max. 50 kg Dielectric requirement: 450 l Required cooling capacity: 4.5 kW Air flow rate: 10 l/min Required air pressure: min. 6 bar Electrode changer: 4-position

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 350 mm, ruošinio svoris (maks.): 700 kg, bendras aukštis: 2 530 mm, bendras plotis: 1 213 mm, bendras ilgis: 2 326 mm, stalo plotis: 500 mm, stalo ilgis: 575 mm, garantijos trukmė: 12 mėnesiai, The genius 700 marks a new era in die-sinking EDM for you. High traverse speeds and reduced auxiliary times ensure exceptionally fast processing of your orders. The ratio of table size to travel path is unique in this class, allowing for optimal table utilization. Within its category, this machine offers by far the greatest dielectric fluid height above the table. Adjusting the dielectric in the infinitely variable tank is quick and easy. The machine features a high degree of rigidity thanks to preloaded linear guides. The moment of inertia of the C-axis is comparatively high at 0.6 kg / m². It is also equipped with a high-precision measuring system. Even demanding EDM processes can be executed economically and with maximum precision using the genius 700. The 'on-the-fly' filter change prevents downtime, while the central lubrication system reduces maintenance times. The genius 700 can be connected from two sides, allowing for flexible positioning. The height-adjustable control panel is ergonomically designed and enables operation even when seated. Travel range X – Y 400 x 350 mm Travel range Z 350 mm Table: Length x Width 575 x 500 mm Distance: Table – Quill or Chuck max. / min. 550 / 200 mm Dielectric above table 420 mm Overall dimensions (W x D x H) 1213 x 2326 x 2530 mm Total weight (without fluids) 3200 kg Workpiece weight 700 kg Electrode weight with rotary 15 kg Electrode weight without rotary 50 kg with manual safety Resolution X – Y – Z 0.001 mm (optional 0.0001 mm) Resolution C 0.001° Dielectric requirement 330 liters Generator IPMtec (integrated) Working current 52 A total optional 100 A total (+ 48 A) Booster 196 A total (+ 96 A) Suction capacity 200 m³/h (55 l/sec) Required cooling capacity 2.5 kW Floor load approx. 2.1 N/mm² Number of leveling feet 3 Weight per foot 2 t Foot plate diameter ø 110 mm Flow rate (air) 10 l/min Required air pressure min. 6 bar T-slots: Quantity / Width / Distance 4 slots / 10 mm / 3 x 100 mm Paper star filter 1 piece Flushing system 1 pressure connection Gsdpfx Aljyh Nfbs Noud 1 suction connection 1 fine flow pressure connection Flush quantity regulator stepless Programming software PROGmodEDM

Būklė: labai geros būklės (naudotas), Digital Printing System for Carpet and Textile Printing ChromoJet is a valve-based jet print technology developed by ZIMMER in 1976, which has since established itself as a standard for carpet printing and printing on heavy textiles. The digital printing systems of the ChromoJet family are suitable for all types of pile products in the range of 300 to 1,500 g/sqm. ChromoJet operates with high-speed valves. The pre-mixed, pressurized special or process dyes are injected with surgical precision deep into the surface of the pile without any machine parts touching the material. The result is maximum color penetration and excellent print resolution. Dye Classes: - Acid and Pre-metallized: For printing on polyamide (nylon) and wool - Disperse: For printing on polyester-based carpets - Cationic: For printing on modified (cationic) polyester and acrylic fibers - Reactive: For printing on carpets and mats made from polyamide, wool, and cotton Applications: Floor coverings such as wall-to-wall carpet, rugs, carpet tiles, mats Machine Data: - Max. material width: 1100 mm - Max. printing width: 1150 mm - Number of colors: 8 per nozzle type - Number of carriages: 1 - Number of nozzles per color: HSV200: 4 / HSV400: 8 / HSV800: 8 - Total number of nozzles: 160 Design Resolution: - HSV200: 1.667 mm dot size - HSV400: 1.0 mm dot size Godpfxeuzgzco Al Njud - HSV800: 0.5 / 0.33 / 0.25 mm dot size Electrical Data: - Connected load: 7 kVA, approx. 10 A - Mains voltage: 400 V, 3-phase, 50 Hz - Control voltage: 24 VDC - Max. short-circuit current: 10 kA Financing through our partner bank is also available. komplett-konzept.leasingo.de Find more products – new and used – in our shop! International shipping costs on request!

Būklė: geras (naudotas), Aluminum Measuring Table with 50 mm Aluminum Plate and Drawer Cabinet Type: Measuring table with aluminum measuring plate Dimensions: 80 cm wide, 75 cm deep, and 95 cm high (2.26 m high with construction) Aluminum plate: 5 cm thick, with threaded holes Drawer cabinet manufacturer: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Condition: Used Complete plant closure, large selection of warehouse platforms, pallet racking, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools Guedohvmkijpfx Al Njd More items—both new and used—can be found in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Laboratory Foam Dosing Station with Foam Mixer and Applicator The system operates similarly to the SUPRA MIX concept. Multiple chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be adjusted during operation. Foam Applicator with Mixer Gsdpfxju D E A De Al Nsud • Dynamic foam mixer with online dosing of 5 products + water • 5 dosing pumps • One direct inlet for mixing • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m width Applications - Stain blockers - Dirt, water, and oil repellents - Fluorocarbons - Antistatic chemicals - Softeners - Flame retardants - Antibacterial chemicals - Moth and beetle protection agents - Pile stabilizers - Anti-felting agents - Resins for crease and dimensional stability Specification Foam density: 20 – 100 g/l (higher density at lower flow rates) Dosing range: 0.5 – 500 g/l (1:100 with each pump) Foam volume: 50 – 500 l/min Electrical Data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions: HxWxD = 1400 x 2100 x 860 mm Year of manufacture: 2007 Purchase price: €47,600 Financing through our bank is also possible. komplett-konzept.leasingo.de You’ll find more new and used items in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) Guedpfx Alswbp Nwo Nsd No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for the discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load (kW): 80

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) Gujdsfi Tg Hepfx Al Nod No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 100 h, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, valdiklių gamintojas: Bosch Rexroth, valdiklio modelis: Han´s 901, lazeri tipas: šviesolaidinis lazeris, lazdo šaltinio gamintojas: Han´s Laser, lazero valandos: 20 h, lazerio galia: 12 000 W, lazerio bangos ilgis: 1 050 nm, maks. lakšto storis: 35 mm, plieno lakšto storis (maks.): 35 mm, nerūdijančio plieno lakšto storis (maks.): 30 mm, aliuminio lakšto storis (maks.): 30 mm, žalvario lakšto storis (maks.): 20 mm, vario lakšto storis (maks.): 20 mm, stalo ilgis: 3 000 mm, stalo aukštis: 700 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, X ašies eiga: 3 100 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 100 mm, X ašies padavimo greitis: 280 m/min, Y ašies padavimo greitis: 280 m/min, pjovimo greitis: 10 000 mm/min, kartojimo tikslumas: 0,05 mm, ruošinio svoris (maks.): 2 150 kg, galia: 12 kW (16,32 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, suslėgto oro jungtis: 14 juosta, bendras svoris: 10 000 kg, bendras ilgis: 10 000 mm, bendras plotis: 2 550 mm, bendras aukštis: 2 200 mm, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, Trade show machine, brand new at an unbeatable price! The machine offered here is a new demo machine, year of manufacture 2025, which was showcased at the EMO trade fair in Hannover in September 2025 and is now looking for a new owner. The machine is brand new! Demo unit! The original list price for this machine is €295,000. Our one-time offer for this machine is €199,000! This includes delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and test cuts can be made from December 2025 onwards. Cutting samples and demonstration videos available. Specification starts here: G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system with premium components and a distinctive design Cutting area X-Axis [mm]: 3100 Y-Axis [mm]: 1600 Z-Axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2550 Height [mm]: 2200 Max. sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (high-quality/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminium: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminium, copper, brass, titanium, and nickel alloys Fully enclosed for optimal laser safety Compact design saves shipping costs and reduces installation time Hollow structure design, suitable for up to 60 kW Improved accessibility via full-length side sliding door Ergonomic loading and unloading for small workpieces High load-bearing capacity for thick materials thanks to the hydraulic shuttle table High dynamics and productivity thanks to powerful control system and motors Integrated control cabinet and laser source with easy maintenance access Various automation solutions available Fast support response thanks to remote service Fully enclosed machine with OD5+ laser safety viewing windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, as well as table drive motors are fully integrated into the main frame. Easy visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide range of small workpieces Quicker reaction times for demo cuts Greater dynamics & productivity With an optimized machine bed and extruded aluminium gantry, equipped with the fast real-time controller "Han’s 901 (Rexroth)" and powerful Rexroth motors, the HF Expert achieves extremely high speeds and acceleration. Component configuration and selection Control system: Han’s 901 (Rexroth, Germany) Gjdpfx Aexlt Hfsl Njud Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guides: Hiwin, Taiwan (China) Rack and pinion: Güdel, Switzerland Gearboxes: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China