AUTOMATINĖS GRĘŽIMO IR GRĘŽIMO STAKLĖS

BIESSE + RBO (BIESSE Group) 2 x Techno FDT CN

Būklė: paruoštas naudoti (naudotas), Format: 0.5–1 L, maximum output capacity: 5,000 cartons/h, equipped with cap applicator and EURO-LINE cartoning machine, on-site inspection possible. Isdpfx Asrviq Hog Eeaw

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazeri tipas: šviesolaidinis lazeris, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, Masina pjaustymo formatas (mm): 12000 x 2500 Iaodpfx Aswwz Dxeg Eow X ašies eiga (mm): 2530 Y ašies eiga (mm): 12050 Z ašies eiga (mm): 120 Didžiausias sintezuotas pozicionavimo greitis (m/min): 140 Pagreitis (G): 1,5 Pagrindinio bloko matmenys (mm): 15600 x 3650 x 1900 Užimamas plotas (mm): 16000 x 5500 Bendras įrenginio svoris (kg): 12500

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Iedpfjwf Dpgjx Ag Esaw Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Granulių gamybos fabrikas – pilna linija – visiškai automatizuota Salmatec presas Rematec plaktukinis malūnas Juostinis džiovintuvas VAI maišų pakavimo mašina Aušintuvas Klasifikatorius Paletavimo įrenginys Mažiau nei 1000 darbo valandų – sertifikuota Galimybė iš naujo sumontuoti vietoje Galimybė apmokyti operatorius vietoje Iaodpfx Agszg Eude Eow

Būklė: naudotas, Gamybos metai: 2022, Kartonavimo įrenginys su karšto klijų įtaisu. Įrenginys turi mažai darbo valandų. Ypač tinkamas produktams, kuriuos galima įdėti į dėžutę iš šono. Iasdpfxevb E Eve Ag Ejw

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Ijdpfxeu Agh Sj Ag Eeaw Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 2006, Numerical control XP 600 X-axis working area: 3060 mm Iaodpfxsv Aacfo Ag Esw Y-axis working area: 1140 mm Z-axis working area: 160 mm Number of working zones: 2 Bar worktable 6 adjustable support bars for suction cup positioning Number of pneumatic bakelite rods for panel lifting (?): 2 2 adjustable suction cups per bar with vacuum seal to secure the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located at the drill head, cone type ISO 30 BH19L boring head with 18 spindles arranged as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw unit for grooving along the X-axis Front photocell protection and safety system Automatic lubrication system (?) Climate system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Ijdpfoh Nypfex Ag Eeaw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. Iajdjtkt Tpepfx Ag Eow • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm • Ištraukimo jungtis virš mašinos

Būklė: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Ijdjukhd Ajpfx Ag Eoaw Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions