N.C. Gręžimas ir kaiščiai Įstatyti liniją

BREMA (BIESSE Group) 2 x Vektor (GLR-X 30-13 + XK 40-13) + ID

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Ijdsi Ezx Dspfx Aauetf Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizacija įvadoi prieš obliavimo stakles KVH/BSH ruošiniams - Ilgiams iki apie 13 m Itodovbtpjpfx Aaujf - Ideali KVH+BSH sistema prieš obliavimo stakles - Išilginis iškrovimas – ruošinių išskyrimas - 4 vnt. šoniniu būdu reguliuojamų diskinų pjūklų - Pjovimo skerspjūvis: 180 x 220 mm, 150 x 300 mm - Pakanka 1 operatoriaus

Būklė: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Itjdpfx Ajdfgg Ijaujf E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Itodpfx Aajhlp Efeujf

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Iedjhuthyepfx Aaujtf Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer heads with strip knives Immediately ready for operation

Būklė: naujas, Gamybos metai: 2026, Korpusų tvarkymo sistemų komplektavimas rankinėms, pusiau ar visiškai automatizuotoms korpusų surinkimo linijoms visada atliekamas atsižvelgiant į kliento reikalavimus. Itedpfxodx R D De Aauof Korpusų surinkimo linijų, kurios palengvina darbą, sumažina perstatymo laiką ir padidina gamybos pajėgumą, privalumus mielai paaiškinsime asmeninio pokalbio metu.

Būklė: paruoštas naudoti (naudotas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Itedpfx Aaem Habdjuof

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER) Itodpegwbbqjfx Aauof

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Iedpfjvwbp Asx Aaustf

Būklė: labai geros būklės (naudotas), GANTRY LOADER with DOUBLE LOADING STATION Vacuum system (with its pump) No. 4 vertical columns supporting the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley to which horizontal arms are attached No. 2 adjustable horizontal metal arms with vacuum suction cups No. 2 floor-mounted rollers for feeding panel stacks into the Loader No. 1 motorized roller table (delivering panels to the Unloader), with additional cross motorized conveyor belts (at 90°). Dimensions approx. 7,232 mm Separate electrical and control panel OMRON electronic controls Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Minimum/maximum board thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1,200 x 3,200 mm Installed power: 23.3 kW Iodpfx Ajd Rg Dpeauetf