Nepertraukiamo gręžimo staklės

WEEKE (HOMAG GROUP) BST 500 Optimat

Būklė: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 Fpedpfx Ahsivawpswed No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 20

Būklė: beveik kaip naujas (parodų įrenginys), COMPLETE DOUBLE-SIDED EDGE BANDING AND PANEL SIZING LINE. The line consists of the following machines: Fjdpfxjdt Rgve Ahwjpd VZ0200A) Automatic loading station with double loading platform "BARGSTEDT" Model TBH 500/D/30/12 VZ0200B) 1st double-sided edge banding and panel sizing machine "HOMAG" Model KFL 525/8/A3/15 VZ0200C) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDL 310/30/12 VZ0200D) 2nd double-sided edge banding and panel sizing machine "HOMAG" Model KFL 526/10/A3/30 VZ0200E) Rotation station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Būklė: naudotas, Apvalaus šlifavimo staklės STUDER S20-2 Fpodpfxoxrg Hxo Ahwsd

Būklė: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Fjdpfxewtgcxo Ahwopd Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, X ašies eiga: 1 500 mm, Y ašies eiga: 750 mm, Z ašies eigos atstumas: 610 mm, ruošinio svoris (maks.): 1 500 kg, bendras aukštis: 24 920 mm, bendras ilgis: 43 670 mm, bendras plotis: 30 700 mm, stalo ilgis: 1 600 mm, stalo plotis: 700 mm, ašies variklio galia: 11 W, greitasis eiga Z ašyje: 24 m/min, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, veleno nosis: Iso 40, veleno greitis (maks.): 8 000 aps./min, veleno greitis (min.): 40 aps./min, įrankio skersmuo: 75 mm, įrankio ilgis: 250 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, NEW Vertical Machining Center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Included accessories: Fjdpfsrkn Iiex Ahwspd - Rotary table interface - External spindle air blast - Left-side auger chip conveyor - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece wash gun - Enclosure wash system - 390-liter coolant collection tank - Three-color stack light end-of-cycle alarm - Full auto shut-off

Būklė: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, TRANSMIT function, Precision package, BA 4, Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Fpedspumdcepfx Ahwjd Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Fedpfjh E Sghox Ahwjpd Spindle speed: 18,000 rpm Dismantled - available immediately

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Fedpfsvca Izox Ahwjpd Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min TILTING AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER Fsdpfeuhbv Sox Ahwjpd - Pallet changer type: Rotopalette - Pallet size: 400 x 400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 4,100 x 2,300 mm - Machine height: 2,720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin wash - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 206432, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 570 mm, darbinio tūrio: 392 cm³, įpurškimo slėgis: 2 000 juosta, išstūmimo eiga: 225 mm, bendras svoris: 7 450 kg, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current information – Tax notice and advantage for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (LxWxH): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete 50 mm highly wear-resistant thermoplastic cylinder - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with two variable delivery pumps - GOLDEN EDITION anniversary model - Thermoplastic processing - 50 mm open nozzle - Extended 50 mm nozzle tip - Heating band for open nozzle - Heating band for extended nozzle tip - 570 central clamping plate configuration, ⌀ 125 mm - Two air-blast units with pressure regulator - Connection for air-blast unit 1 - Connection for separating unit - Core pull 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Interface for robot system (EUROMAP 67), 50-pin - Interface for ARBURG host computer - Socket distributor: 1 CEE, 1 Schuko additional - Serial printer interface USB - CompactFlash interface for data storage - Operator authorisation via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for colouring unit - Manual adjustment for free cooling circuits - Machine-specific cooling circuits controlled - Equipment package: advanced monitoring - Equipment package: extended movement - Equipment package: production control - Equipment package: optimisation / operator assistance - Equipment package: quality assurance - Equipment package: documentation Complete documentation available Injection unit: Screw diameter: 50 mm Injection weight: 359 g/PS Injection pressure: 2000 bar Injection volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie-bar clearance: 570 x 570 mm Mounting plates: 795 x 795 mm Tool installation height: 300 mm Max. plate distance: 950 mm Opening stroke: 650 mm Ejector stroke/force: 225 mm / 66 kN Clamping system: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany, and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Free loaded onto the buyer’s truck, or free house delivery for transport reimbursement, available ex stock Hannover, Germany Fpsdpfx Ahsw Tt R Ijwed A summary of our machines and company: - We only sell machines we have purchased from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers trading with third-party property - All machines come from successful companies that have given them proper maintenance and care - All machines offered can be viewed at our warehouse