Canon Arizona 480Xt pirkti naudotą (6 514)

Būklė: geras (naudotas), Franz Haas Wafer Stick Baking Oven Model EWB 1/1 after complete overhaul. The machine is made of ASIS 304 stainless steel (main frame is carbon steel). The oven is equipped with a rotating ring, which can be speed-adjusted to achieve the desired type of wafer bake. The ring has been cleaned and aligned (centered), supports/bearings are new. Fans have been replaced with new ones. New chimney outlet with flange for quick installation. Lasdpoywgaxjfx Aaxeh The machine is fitted with two extruders with sleeves for shaping the strip and for the wafer stick diameter. Equipped with a pneumatic cylinder knife with photocell for precise cutting (length of the stick adjustable). The oven features a stainless steel batter tank with a frame and trolley. The oven is equipped with pumps that feed batter from the tank onto the ring surface. Fitted with a new control panel and new gas reducer. The speed of the ring and pumps is controlled via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is gas-powered, natural gas family, high-methane type, code E (formerly GZ 50). Power supply 3x400V / 16A Consumption approx. 2.5/3 kWh The machine has been fully refurbished. All thermal components were replaced with new, eco-friendly versions—lower gas consumption and higher efficiency. Output: approx. 120–150 kg/8 h

Būklė: naudotas, Gamybos metai: 2023, bendras ilgis: 8 430 mm, · Lifting height: 18,350 mm · Platform height: 18.35 m · Outreach / Articulation point: 8 m · Basket arm rotation angle (up / down): +69° / -66° · Upperstructure rotation: 355° · Basket rotation (right / left): 90° / 90° · Number of persons (indoor / outdoor): 2 / 2 · Ground clearance at wheelbase center: 0.44 m · Wheelbase: 2.40 m · Travel speed (transport mode): 4.70 km/h · Travel speed (work mode): 0.80 km/h · Gradeability: 40% · Permissible incline in work mode: 5° · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Braked wheels: 0 / 2 · 230 V connection · 4-wheel steering with crab steering · 4 simultaneous movements · Audible alarm and warning light (tilt, overload, slope) · CAN bus technology · Differential lock on rear axle · Electric emergency pump Lodoxndpvepfx Aaxsah · Engine with DPF · Galvanized basket 2,100 mm · Oscillating front axle · Proportional controls · Stop & Go · Stepped speed control · Deadman pedal · Front axle with slip limitation · Large color display on ground controls · Inside turning radius: 1.26 m · Outside turning radius: 3.90 m · Engine emission standard: Stage V · Engine rated power / output (kW): 34 Hp / 25.50 kW · Ground pressure: 20.65 daN/cm² · Hydraulic pressure: 340 bar · Hydraulic tank capacity: 80 l · Fuel tank capacity: 78.50 l · Harmful NOx emissions: 2.61 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, 1 used, very well-maintained fully hydraulic cold circular saw automatic machine with flat vertical guides Lasdpfjy E Uk Ijx Aaxeh Max. saw blade diameter: 325 mm Cutting range 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangular (flat): 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single feed: up to max. 550 mm Multiple cut feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2,150 x 1,450 x 1,950 mm Weight: approx. 650 kg Accessories / Special features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Clamping feed system • 90° cutting angle • Continuously variable speed range 20 - 100 rpm • Length adjustment via programming on the control panel • Speed and feed can be continuously adjusted during operation on the operator panel • Single and multiple feed • Flat vertical guides, adjustable • Coolant system • Micro-spray unit • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Būklė: labai geros būklės (naudotas), Special accessories for DECKEL SO + SOE cutter grinders: - 1 very well-preserved special arbor for milling cutters o For grinding end mills with diameters 16 – 25 mm and with Morse taper shanks MK 1, MK 2, and MK 3 o Milling cutters with clamping shank Ø 25 mm can be directly mounted o Maximum through bore: 25 mm Price: €950.00 net - As-new collets for special milling cutter arbor: - 1 set of collets for special arbor, internal diameter Ø 16, 18, and 20 mm, price: €129.00/each net Lajdectyh Uspfx Aaxeh - 1 set of collets for special arbor, internal square □ 8, 10, and 12 mm, price: €145.00/each net - 1 set of Morse taper adapters MK 1, MK 2, and MK 3, price: €245.00/each net - As-new cup grinding wheel Ø 80 mm, price: €40.00/each net - 1 brand new knurled nut for tightening collets with saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All prices listed above are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: geras (naudotas), Gamybos metai: 1995, max. cutting length: 3050 mm Material thickness 37 kg/mm²: 12 mm Material thickness 70 kg/mm²: 8 mm Cutting angle: 1.8 degrees Strokes per minute: 8 - 13 min⁻¹ Number of hold-downs: 12 Drive power: 18.5 kW Dimensions (L x W x H): 4150 x 1950 x 1950 mm Weight: 8000 kg Equipment / Special Features: • Motorized NC back gauge control, ELGO type 71, length approx. 900 mm • On demand, thanks to the toggle lever system, the machine can operate with just one cylinder at approx. 55% of nominal capacity for reduced cutting performance. This increases the cutting sequence for more efficient thin sheet processing. Switching from fast to slow is done via a selector switch on the control panel. • Hydro-mechanical drive via robust toggle lever • Easy blade gap adjustment on both sides • 2 cylinders mounted externally on the machine for easy access • Vertical, stable guides • Upper and lower blades with four cutting edges each • Hydraulic overload protection • Hold-down force is proportional • Machine frame is a complete welded construction and is machined in one single set-up (no bolted parts) • Portable electric foot switch • Blades suitable for mild steel and stainless steel • Ball rollers in table • 1 angle stop • 1 support arm • CE-compliant Lasdpfovkw Dvsx Aaxeh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Gamybos metai: 1998, būklė: naudotas, Temperature: 200-210 °C Throughput speed: 1000 mm/min Maximum workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection reflow soldering system for printed circuit boards (PCBs) Soldering system for PCBs (e.g., SMD and/or mixed technology) and for curing SMD adhesives The soldering system operates with the following processes: loading – preheating – soldering – cooling – unloading. - with software functions - can be integrated into a production line Additional technical specifications: - Protective atmosphere using nitrogen 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 liters/min; 2 - 5 bar overpressure - Extraction air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L: 6500 + loading station 2000 x W: 1400 x H: 2100 mm Additional equipment included: - Automatic stacking unit LSB 03 with loading head and discharge conveyor for holding, e.g., PCBs. - Machine is CE98 certified System suitable as a source of spare parts or for conversion or extension. Laodpfsu Rwauox Aaxsh Sold as is, at clearance price.

Būklė: naudotas, Accessories for, e.g., a BFT 130 table-type boring mill. The spindle head and swivel angle can each rotate 360° around their respective axes. Two swivel planes. The set angles can be read off from circumferential scales. Maximum speed: 600 rpm. Lodju Nlgyjpfx Aaxsah Spindle taper: ISO 50. Weight: approx. 270 kg Including connecting piece for SK 50 quill/head drive.

Būklė: naudotas, Technical details: Plate length: 4000 mm Plate width: 1000 mm Plate height: 1700 mm Material thickness: 150 mm Approx. machine weight: 2300 kg Lsdpfxju N Dmlo Aaxsah Milled cast aluminium plate This plate allows for assembly work to be carried out on both sides. Numerous clamping holes (M8), evenly arranged across the plate. Using a lifting/carriage frame (welded/bolted), the aluminium plate stands securely on the floor. The plate can be relocated using two wheels on each side.

Būklė: naudotas, Technical Details: Table diameter: 315 mm Table rotation – manual/mechanical: 360° Approx. machine weight: 100 kg Dimensions: 620 x 530 x 135 mm Multiple rotary tables of this type are available for sale. Total height: 135 mm Additional features: Lajdsu N Dz Aspfx Aaxsh - With radial scale - Surface is fine-machined - Center mounting: Morse taper 3 (MK3) - Bolt circles: 19 / 27 / 31 / 41 / 49 / 59 - Can be operated externally/mechanically via clutch on both sides (switchable between clockwise/counterclockwise with automatic reversing) - Base clamping: support surface 360 x 420 mm with 1 T-slot (face side) 16 x 200 mm

Būklė: naudotas, Technical Details: Material diameter (min - max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 pcs. Blasting hours: approx. 200 Space requirements approx.: total height approx. 4.5 m Connection rating: approx. 40 kW Lodou Nu I Tjpfx Aaxsah CONTINUOUS SPRING SHOT BLASTING MACHINE (SPRING HARDENING) Applications: For shot blasting/hardening of springs in a continuous process. The springs are conveyed through the blasting machine by a drag chain, which is exposed to the blast stream. The conveyor speed of the drag chain is adjustable. Very little used, approx. 200 operating hours. The system comprises: - Machine housing, interior (hardened high-alloy tool steel) with interchangeable blast plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Blast chamber length/depth: approx. 2000 mm / approx. 670 mm - Blasting media: steel shot Ø 0.3 - 0.8 mm - Workpiece dimensions: springs Ø 20 - 30 mm x L: 70 mm - Drag chain drive power 1.1 kW - Max. conveyor speed: 15 RPM - Initial blasting media load approx. 500 kg (per machine) - Connected load approx. 40 kW Condition: - Without turbine blades (can be retrofitted at extra cost) ai.

Būklė: naudotas, Technical details: Clamping surface: 630x400 mm Lasdpfou Nkrbox Aaxeh Number of T-slots: 8 Table rotation - manually/mechanically: 360° manual Machine weight approx.: 175 kg Angular extension table - machine table - machine clamping table for milling machine TOS, e.g. FNG or FNGJ The frame can be swiveled horizontally 360° via handwheel (360° scale). T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm Base plate: size 380x300 mm with 6 clamping slots WxL=14x20 mm The machine table is as good as new!

Būklė: naudotas, Gamybos metai: 1989, Technical details: X travel: 300 mm y travel: 300 mm z travel: 400 mm Control: Contour 3 path control Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° Quill stroke: 60 mm Speed range: 40 – 4000 / 21 steps rpm Feed rate: 2 – 3600 mm/min Rapid traverse speed: 4000 mm/min Table size: 620 x 390 mm Clamping table: angle table (mm) Table load capacity: 0.45 t Total power requirement: 12.5 kVA Machine weight approx.: 1400 kg Machine dimensions approx. (LxWxH): 1.5 x 2.1 x 2.0 m Control cabinet dimensions: 1.8 x 0.8 x 1.1 m Features: - Operation via Grundig electronic control panel with extension arm Ljdpfx Asu Nc Twjaxeah - Coolant system with pump - Handheld control unit with handwheel - Machine lighting The machine can be demonstrated under power. i.D.

Būklė: naudotas, Technical Details: Y-Axis Travel – Slide on Beam: 200 mm Spindle Taper ISO: SK 40 Swiveling Spindle Head, Left/Right: ±90° Quill Stroke: 80 mm Speed Range: 90 – 900 / 5 steps rpm Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Table Mounting Surface: Attachment Area: 760 x 200 mm Table Clamping Surface: 630 x 200 mm Max. Table Load: 100 kg X Travel – Table Longitudinal: 320 mm Z Travel – Table Vertical: 350 mm Table Swiveling Range: ±30° (right/left) Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Feed Rate: Table, stepless 14 – 71 mm/min Total Power Requirement: 4.0 kW Approx. Weight: 1,200 kg Machine Dimensions approx. LxWxH: 1.3 x 1.5 x 1.8 m Lasdpou Ndb Asfx Aaxjh Equipped with Heidenhain digital position indicator for X and Y axes. Swiveling working spindle. Table feed is via variator gearbox. The table is swiveling. Spindle speeds are set in 3 steps via gearbox and 2 steps electrically. Coolant system installed. Milling beam extendable by approx. 350 mm. The machine vice is recommended but NOT included in the scope of delivery. It can be purchased optionally.

Būklė: naudotas, Gamybos metai: 1996, Technical Details: X-axis travel: 762 mm y-axis travel: 510 mm z-axis travel: 560 mm Control system: Heidenhain TNC 415 OR 360 Tool magazine: 21 stations Table clamping surface: 865 x 510 mm Table load capacity: 455 kg Tool holder: SK40 Spindle speeds: 60 - 8,000 rpm Feed rate X/Y/Z: 15,000 mm/min Rapid traverse speed X/Y/Z: 24 m/min Compressed air requirement: 5.5 bar Total power consumption: 30 kVA Spindle motor power: 11.0 kW Spindle torque: constant from 60 - 750 Nm Machine weight approx.: 4.3 t Machine dimensions (LxWxH) approx.: 2.6 x 2.8 x 2.6 m Lsdpju Idmvsfx Aaxjah Coolant unit dimensions (LxWxH): 2.7 x 0.8 x 0.8 m Machining center with automatic tool changer Internal coolant supply and coolant system with nozzle feed Chip and coolant tray Lubrication system via ball screws Handheld control unit Heidenhain TNC 415 – dialog or ISO mode (machining cycles: deep hole drilling, tapping, slot milling, rectangle and circular pocket milling, SL cycles), up to 100 programs can be managed Machine can be inspected under power. As is. *

Būklė: naudotas, Gamybos metai: 1987, Technical details: X travel: 700 mm y travel: 500 mm z travel: 600 mm Swivelling table +/-: A-axis: 20° / 60° Rotary table: B-axis: 360° Control: Maho 432 (3D contouring control) Max. milling capacity: steel: 60 mm, cast iron: 22 mm Tool magazine with 24 stations Spindle speed: 20 – 6300 rpm Max. table load: 200 kg Spindle taper: ISO 40 (hydraulic clamping) Spindle head can be manually swivelled 90° left and right Quill stroke: 80 mm Feed rates: X/Z: 1 – 3000 mm/min, Y: 1 – 4000 mm/min, B: 0.1 – 3000°/min Rapid traverse: X/Z: 10 m/min, Y: 8 m/min, B: 20 rpm Control voltage: 110/220 V Total installed power: approx. 20 kVA Machine weight approx.: 5.5 t Machine dimensions (LxWxH): approx. 3.0 x 2.4 x 2.25 m Required space: approx. 5.2 x 5.0 x H: 2.3 m NC rotary table Ø 520 mm with A and B axis Variable three-phase motor with 4-speed gearbox Swivelling working spindle for horizontal spindle operation Equipment: - Handheld control unit - Coolant device - Machine lighting Lodsu Idbyepfx Aaxjah

Būklė: naudotas, rida: 708 489 km, galia: 235 kW (319,51 AG), pirmoji registracija: 08/2010, kuro tipas: dyzelinas, tuščias svoris: 9 400 kg, didžiausias leistinas svoris: 8 600 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 5 800 mm, kuras: dyzelinas, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 5, bendras ilgis: 10 000 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 600 mm, veikimo valandos: 14 926 h, cilindrų skaičius: 6, darbinio tūrio: 9 290 cm³, nominali galia: 235 kW (319,51 AG), Įranga: ABS, Bluetooth, EBS (Elektroninė stabdžių sistema), USB jungtis, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), galinis keltuvas, kruizo kontrolė, sėdynės šildytuvas,

Būklė: naudotas, rida: 36 622 km, galia: 250 kW (339,91 AG), pirmoji registracija: 12/2005, kuro tipas: dyzelinas, tuščias svoris: 9 100 kg, didžiausias leistinas svoris: 8 900 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 5 000 mm, kuras: dyzelinas, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 3, bendras ilgis: 9 400 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 500 mm, cilindrų skaičius: 6, darbinio tūrio: 10 640 cm³, nominali galia: 250 kW (339,91 AG), Įranga: ABS, EBS (Elektroninė stabdžių sistema), USB jungtis, autonominis šildytuvas, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), galinis keltuvas, kruizo kontrolė, priekabos jungtis,

Būklė: geras (naudotas), rida: 845 675 km, galia: 537 kW (730,12 AG), pirmoji registracija: 04/2015, kuro tipas: dyzelinas, tuščias svoris: 13 000 kg, didžiausias leistinas svoris: 13 000 kg, bendras svoris: 26 000 kg, ašių konfigūracija: 6x2, kuras: dyzelinas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, veikimo valandos: 31 287 h, cilindrų skaičius: 8, darbinio tūrio: 16 353 cm³, nominali galia: 537 kW (730,12 AG), Įranga: ABS, autonominis šildytuvas, centrinis užraktas, diferencialo užraktas, eismo juostos palaikymo asistentas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kruizo kontrolė, retarderis, sėdynės šildytuvas,

Būklė: naudotas, rida: 358 094 km, galia: 368 kW (500,34 AG), pirmoji registracija: 02/2020, kuro tipas: dyzelinas, tuščias svoris: 16 300 kg, didžiausias leistinas svoris: 23 700 kg, bendras svoris: 40 000 kg, ašių konfigūracija: 10x4, kuras: dyzelinas, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, cilindrų skaičius: 6, darbinio tūrio: 12 742 cm³, nominali galia: 368 kW (500,34 AG), Įranga: ABS, Bluetooth, EBS (Elektroninė stabdžių sistema), centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kruizo kontrolė, retarderis, sėdynės šildytuvas,

Būklė: naudotas, rida: 686 425 km, galia: 302 kW (410,61 AG), pirmoji registracija: 06/2014, kuro tipas: dyzelinas, tuščias svoris: 7 530 kg, didžiausias leistinas svoris: 10 470 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, kuras: dyzelinas, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, veikimo valandos: 14 640 h, cilindrų skaičius: 6, darbinio tūrio: 12 742 cm³, nominali galia: 302 kW (410,61 AG), Įranga: ABS, EBS (Elektroninė stabdžių sistema), centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kruizo kontrolė, sėdynės šildytuvas,

Būklė: naujas, This is a new machine manufactured in Romania by Emsil. Customer requirements can be considered and implemented depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering office. Spindles: The Narwhal is equipped with a boring spindle made of hardened, tempered, and alloyed steel. It is mounted with preloaded angular precision ball bearings. Additionally, the machine features a milling and boring bar capable of handling exceptional performance and torque. The bar is made from nitrided, alloyed steel and is also equipped with angular preloaded precision ball bearings. It moves on bronze guide bushings. The clamping devices of both units, used for fixing and releasing the tool holding taper with ISO 50 coupling, operate automatically to open and close. Rotary Table: Table rotation is achieved via a dual pinion gear system, a centrally supported shaft, and a hydrostatic sliding block on the center bearing, all dimensioned for maximum precision—even under heavy or unbalanced loads. A ball screw drive is used for the X-axes. Both axes are equipped with direct position measurement systems. CNC Axis Control: All 9 axes of the machine are continuously monitored. The monitoring system includes a 15'' TFT display, an operator panel, remote diagnostics that alert users in case of faults, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, or Siemens. You can select the machining envelope for the X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500 mm, according to your requirements! Best regards, i.D. Laodpfeu Id H Asx Aaxeh

Būklė: naudotas, Gamybos metai: 1996, Technical Specifications: X-Axis Travel: 2,500 mm y-Axis Travel: 560 mm z-Axis Travel: 600 mm Control System: TNC 426 CA Drilling Capacity in Steel (diameter): 400 cm³/min Maximum Milling Capacity: 400 cm³/min Tool Magazine: 34 positions Tool Clamping Force: 12 kN Spindle Taper: SK 40 Spindle Overhang: 580 mm Spindle Speed: 20–7,500 rpm, stepless Spindle Torque: 210 Nm Distance Spindle Nose–Table: 0–600 mm Feed Rate (X/Y/Z): 1–24,000 mm/min, stepless Rapid Traverse (X/Y/Z): 24 m/min, stepless Lodpfjvad Hpjx Aaxeah Feed Force: X/Y = 6 kN and Z = 8 kN Table Size: 3,300 x 500 mm Table Load (central/max): 2,500 kp Interface: yes Total Power Requirement: approx. 43 kW Machine Weight approx.: 14.4 t Machine Dimensions approx. (LxWxH): 3.05 x 5.6 x 3.0 m Chip Conveyor Dimensions (LxWxH): 6.6 x 0.6 x 1.3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design With integrated coolant supply system Link-type chip conveyor MAN+HUMMEL with coolant tank and pump Coolant preparation unit by ALLWEILER AG, size L: 1,550 x W: 1,000 x H: 1,200 mm; filter band width 500 mm; pressure 30 bar Hydraulic unit Machining area can be partitioned—divider wall present

Būklė: naudotas, Technical Details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Ledpfx Aaovc Akljxsah Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubricating unit (LxWxH): 830 x 650 x 1000 mm Dimensions machine approx. (LxWxH): 3.3 x 1.5 x 1.45 m Dimensions control cabinet (LxWxH): 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-handed tension and compression springs as well as torsion springs. Springs can be produced with any desired pitch and coil body shape. Output max. 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length unlimited, feed speed = 27 - 80 m/min. Coiling unit: Two-finger system, wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire intake 3 mm, two-finger Spring length measuring device LION PRECISION-PANTHER Wire reel holder POST, motor-driven, mandrel Ø 1,400 mm Lubricating unit Control cabinet cooler RITA Hydraulic power unit A wide range of accessories and/or spare parts available on request! i.D.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 system by Alpine Originals. Technical details Construction materials Product contact parts: Stainless steel Non-product contact parts: Stainless steel Equipment is not explosion-proof (NPSR) Ljdevq Nlxjpfx Aaxjah Non-ATEX (can be upgraded at additional cost) Without vacuum system (can be equipped at additional cost) Scope of supply Hosokawa Alpine Pharmapaktor APC L 200/30, with dosing unit, without Flake Crusher. The Hosokawa Alpine Pharmapaktor APC L200/30 is the ideal compactor for testing the behavior of various products with this technology, while also enabling continuous low-capacity production if needed. The Pharmapaktor can be fitted with a flake crusher granulator to process the compacted material generated by the unit, thereby expanding the range of finished products that can be achieved with this system—obtaining various shapes and sizes, from different briquettes to granules in accordance with required specifications. Thanks to this flexibility, the machine can be adapted to different products and applications. Compaction head Two cast stainless steel H-frames joined by spacer bolts. Two lateral folding mobile arms for quick roller changeover. The mobile arms are secured with two tie rods, which also absorb the forces generated by the two compaction rollers. An insert in the chamber directs product flow, and two central pieces provide roller sealing. Pre-compaction unit The pre-compaction unit is mounted on a support column and can be lifted and swung aside. The feed hopper (with two breaker bars) is fitted with a cylindrical/conical pre-compression screw. When the pre-compaction unit is withdrawn, a limit switch acts for both rollers and screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusive use of original components Original manufacturer’s warranty Guaranteed spare parts supply by the OEM Reduced lead time Prior to delivery, the machine is fully inspected, all wear parts are checked and replaced if necessary, and the machine is customised to your specific requirements Option to supply all required peripherals or to adapt to your existing production plant We are also interested in repurchasing retired HOSOKAWA ALPINE equipment

Gamybos metai: 2003, būklė: visiškai atnaujintas (naudotas), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Exclusively uses genuine components Original manufacturer warranty Spare parts supply guaranteed by the manufacturer Reduced delivery time Before delivery, the machine is inspected, all wear parts are checked and replaced if necessary, and we customize the machine to your specific requirements All required peripherals can be supplied, or the system can be adapted to your existing production plant We are also interested in repurchasing used HOSOKAWA ALPINE equipment Used Hosokawa Alpine Turboplex ATP 200 Air Classifier for optimum final particle design. Our air classifier allows you to separate a product into two different fractions, fine and coarse, where a standard sieve fails to achieve this goal due to product fineness or other characteristics. This is ideal when you need to dedust a product by removing unwanted ultrafine dust or to guarantee an upper cut size by separating oversized coarse material, thus enabling you to adjust your product to the exact desired particle size distribution specification. This equipment is capable of processing various product types for multiple industries, such as minerals, chemicals, etc. Construction material: - product-contact parts: mild steel - non-product-contact parts: mild steel No wear protection Non-explosion-proof design (NPSR) Scope of supply: Lsdjic Nq Hopfx Aaxoah Hosokawa Alpine Turboplex ATP 200 Air Classifier complete with 1-wheel head and 5.5kW motor