Sukamasis stalas - nenaudojamas

WMW Heckert D 315K / C 315K

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Knsdpfefu Nbbjx Aa Ijd Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Visualization of the entire workflow with easy data input

Sąlyga: geras (naudotas), Dividing head with 24-division direct indexing Knsdpfx Ajdx D Rzoa Iod or via crank using scale 200 mm Röhm chuck overall height 165 mm depth 350 mm width 300 mm weight 34.5 kg

Sąlyga: naudotas, Gamybos metai: 1987, Lead and feed screw lathe Manufacturer: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical specifications: Turning diameter: 250 mm Turning length: approx. 1200 mm Swing diameter over bed: 560 mm Swing diameter over cross slide: 365 mm Max. workpiece between centers: 500–800 kg Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travels Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MT 5 Quill stroke: 190 mm Longitudinal feed: 60 x 0.0315–28 mm/rev Cross feed: 60 x 0.016–14 mm/rev Thread cutting range: 0.125–112 mm Total power requirement: 20 kW Space requirement: approx. 3.5 x 2.0 x 2.2 m Knjdpfotud S Usx Aa Ied Weight: approx. 2.5 t

Sąlyga: naujas, Gamybos metai: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range: 30° right / 45° left Cutting capacities in mm: 45° left: round 300, flat 300 x 300 90°: round 410, flat 620 x 410 45° right: round 360, flat 420 x 360 Kodpsh S Nxpsfx Aa Iond 30° right: round 300, flat 300 x 300 Remaining piece length without bundle clamping: 60 mm Recommended options: Micro-spraying device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Mounting elements

Sąlyga: naujas, Neue Ausrüstung, hergestellt in Dänemark. Hubzeit: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Güter werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbediente Hebe-/Senkfunktion mit Not-Aus. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Kedpfsd Hp Efox Aa Iond Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Freier Innenraum: 585 mm. Hub-/Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Ksdob Ez R Uspfx Aa Iend Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Gamybos metai: 1960, Sąlyga: naudotas, Surface grinding machine with magnetic chuck 250 x 135 Kodpfxjiuz Tgs Aa Iond 400 Volt, power 1.8 kW

Sąlyga: naudotas, Gamybos metai: 2002, - Material feed up to 600 mm - Year of manufacture: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Miter right 45° round/flat: 330 mm / 320x335 mm - Miter right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle clamping width/height: 0-500 mm / 15-335 mm - Material infeed single/multiple: 0-600 mm / 0-9999 mm - Remnant piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: stepless hydraulic - Lowering speed: 0 - 300 mm/min (stepless) - Saw band dimensions: 4400 x 34 x 1.1 mm - Saw band tension: with torque wrench - Max. support weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min - Saw band drive: 3.0 kW - Coolant pump: 0.11 kW - Hydraulic pump: 2.2 kW - Electric pivot drive: 0.09 kW - Spindle feed drive: 0.55 kW Knodpfsu Uu Hwox Aa Ied - Total power requirement: min. 7.5 kW - Rated current: 16 A - Main fuse: 25 A Fill capacities: - Hydraulic: approx. 30 l - Coolant: approx. 80 l - Micro-sprayer: approx. 0.7 l Dimensions: - Machine weight: approx. 1710 kg - Machine dimensions WxHxD: approx. 2500 x 1900 x 2300 mm

Sąlyga: naudotas, Gamybos metai: 2022, Sheet width: 1550 mm Sheet thickness: 4 mm Bending steps: 6 Total power requirement: 2.2 kVA Approx. machine weight: 1.42 t Approx. space requirement: 2.7 x 0.75 x 1 m Rolling feed: 3.5 m/min Motorized plate bending machine Working width: 1550 mm Material thickness up to 4 mm Roller diameter: 140 mm Rolling speed: 3.5 m/min Heavy-duty steel welded construction Driven top and clamping rolls Swiveling upper roll Manual adjustment of clamping and side rolls Roll drive via powerful electric motor and gearbox Wire grooves on the clamping roll Safety device: emergency stop cable With mobile control panel and foot pedal Equipment details: Swiveling upper roll Control panel with digital display and manual operation (option) RBM 2050-30 E PRO optionally with motorized side roll adjustment and digital display for side roll Maximum bending capacity, steel 400 N/mm²: 4.0 mm Maximum conical bending capacity, steel 400 N/mm²: 2.0 mm Maximum bending capacity, stainless steel: 3.0 mm Maximum conical bending capacity, stainless steel: 1.5 mm Maximum bending capacity, aluminum: 4.8 mm Maximum conical bending capacity, aluminum: 2.4 mm Minimum bending diameter: 210 mm Kodpfx Aot Hmlqja Iend Rolling speed: 3.5 m/min

Gamybos metai: 1996, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: xxxx, High-Performance Bench Tapping Machines on T-Slot Table Technical Data: - Tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (swing radius) 2500 mm - Quick-change tool holder, size 2, Ø31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm Kedpfof Tcy Dsx Aa Iend - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required floor space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg