Amtec Lgbg-Fl 25K pirkti naudotą (3 797)

Gamybos metai: 2025, būklė: naujas, Horizontal single-shaft mixer for dry, moist, and pasty products. – Specifications: S-shaped mixing paddles; Tank volume: 200 liters; Processing volume: max. 140 liters per batch; Mixing speed: max. 24 rpm; Mixing motor power: 4 kW; Discharge motor power: 0.75 kW; Machine dimensions approx.: L1850 x W600 x H1000 mm; Weight: 720 kg. Iodov Nlyiopfx Angjbb Please note that our new prices are often below the typical used prices. Feel free to send us an inquiry and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty.

Gamybos metai: 2025, būklė: naujas, Industrial mixer for dry powders, moist or pasty, sticky products. The single-shaft spiral mixer enables uniform mixing of products within a few minutes. - Specifications: Agitator type: single-shaft spiral agitator; capacity: max. 120 liters; maximum idle speed: 53 rpm; machine dimensions: L2030 x W630 x H980 mm; weight: 450 kg. Iedpfxsv Nlyvs Angsbb Please note that our new prices are frequently below the typical used equipment prices. Feel free to inquire and tell us about your packaging task. - Normally, we always have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Angle welding machine for shrink film packaging of very large products, semi-automatic (manual product feed, automatic discharge) with a pneumatic closure mechanism for the angle welder. Suitable for use in combination with the SHRINKtunnel POF-XXL. - Specifications: 220V, 2.0kW; compressed air: 5.5bar, 0.1m³; max. machine cycle rate in idle operation: 20 cycles/minute; max. product dimensions (mm): L900xW600xH300 (customizable on request); max. product weight: depends on product dimensions and distribution of weight on the feed table; machine dimensions depend on actual product sizes; weight (net/gross): 210/250kg. For heavy products, we are happy to provide sample packaging in order to confirm that the machine can handle your products, or, if necessary, to recommend alternative systems for your packaging requirements. For semi-automatic machines, the cycle rate should also be interpreted as an operator-dependent empirical value. Ibsdpfxov Nlzts Angob Please note that our new machine prices often lie below typical used machine prices. Feel free to enquire and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times, starting from approx. 3 weeks. - All machines are available with full warranty.

Gamybos metai: 2025, būklė: naujas, Suitable for counting sweets, cookies, nuts, vegetables, onions, and many types of free-flowing solid granulates. The counting machine is equipped with electronic photo sensors (dust-resistant), as well as additional functional sensors and alarm features. Materials are evenly and gently conveyed to the collection bin via four counting channels using belt conveyors. The feed hopper’s special design prevents product jams. Operation is via an easy-to-use touchscreen; the control menu is available in either German or English. - Specifications: Number of conveyor lanes: 4; Capacity: depends on product type, shape, and quantity; Filling quantity: 2–9999 units (adjustable); Product size: min. Ø 10mm, max. Ø 60mm; large feed hopper; compressed air: 6 bar; power: 220V, 0.6–1.7 kW; machine dimensions (LxWxH): custom-built. The photo shows the 8-lane version. Ibjdjv Nk I Eepfx Angjb The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Simply contact us and specify your packaging requirements. We typically stock 30–50 different new machines available for immediate delivery. For custom-built machines, we offer very short lead times, starting at approximately 3 weeks. All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Suitable for counting sweets, cookies, nuts, vegetables, onions, and many types of free-flowing solid granulates. The counting machine is equipped with electronic photo sensors (resistant to dust) as well as additional function sensors and alarm systems. The materials are transported evenly and without breakage to the collecting container via two counting channels using belt conveyors. Due to its specific design, the feed hopper prevents product jams. Operation is carried out via an easy-to-use touchscreen. The operating menu is available in either German or English. - Specifications: Number of feed lanes: 2; Capacity: dependent on product, shape, and volume; Fill quantity: 2-9999 pcs (adjustable); Product size: min. Ø 10mm, max. Ø 60mm; large feed hopper; Compressed air: 6 bar; Power supply: 220V, 0.6-1.7kW; Machine dimensions: LxWxH customized. Picture shows an 8-lane version. Please note that our new prices are often below the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. We usually have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times starting from around 3 weeks. All machines are available with full warranty. Iodpfx Ansv Nk I Ssgobb

Būklė: naujas, Gamybos metai: 2025, Automatic weighing unit for packaging granular products (chemicals, foodstuffs, sugar, coffee, detergents, etc.) into bottles, cans, or similar containers. Includes hopper, vibratory feeder, weighing unit, dust protection enclosure, deposit tray, and conveyor belt. - Specifications: 2-head weighing unit, each with a weighing range of 10-2000g; accuracy: < +/-1g (depending on product); max. machine cycle rate: 40 cycles/minute; hopper volume: 20 liters; stainless steel version (SS304); power supply: 220V, 0.5kW; machine dimensions (including conveyor): L870xW830xH2100mm; weight: 180kg. Please note that our new prices are often below typical used equipment prices. Please feel free to contact us and let us know about your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines come with a full warranty. Ibjdpfjv Nk Nisx Angob

Būklė: naujas, Gamybos metai: 2025, Fully automatic powder filling system, single auger filling unit, straight can transport. Functions: automatic container feeding – precise positioning – container lifting – vibration – filling – weight feedback – sorting – container discharge. PLC control, precision servo system, dosing technology: dosing auger and feedback from load cell, removable glass cover. - Specifications: filling range: 10-1500g; accuracy: +/- 0.3-1%; suitable for metal cans, glass bottles, plastic containers, paper cups, etc.; container dimensions: diameter 40-130mm, height 80-220mm with different can-feed augers; max. machine cycle rate (idle): 60 cycles/minute; stainless steel version (SS304); power supply: 220V, 2.0kW; machine dimensions: L1850 x W1366 x H2100mm; weight: 260kg. Ibjdpfxev Nk N Nj Angsb The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often below the typical prices for used equipment. Feel free to contact us and let us know about your packaging requirements. - We typically have 30 to 50 different new machines available immediately from stock. For custom-built machines, we offer very short delivery times starting from around 3 weeks. - All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Fully automatic liquid filling system with 8 filling heads, available for operation in one of the following filling ranges (only one can be selected): a) 25-250ml, b) 50-500ml, or c) 100-1,000ml. Stainless steel model, conveyor belt with adjustable speed control, MITSUBISHI touchscreen, bottle neck positioning system, filling heads move up and down during filling (for foamy products). No bottle – no fill function. Suitable for various liquids such as cosmetics, perfumes, flower oil, liqueur, etc. Stable performance and precise filling with both hot and cold liquids. – Specifications: max. machine cycle rate (idle): 80 cycles/min; power supply: 220V; compressed air: 6 bar (power consumption and air consumption depend on the filling range – as do machine dimensions). Ibodpjv Nk Ryofx Angob The machine/system is also available in additional versions for different packaging sizes and speeds. Please note that our new prices are often below standard used equipment prices. Please feel free to contact us and describe your packaging requirements. – Usually, 30-50 different new machines are available ex stock for immediate delivery. For custom-built machines, we offer very short delivery times starting at around 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Automatic multi-lane cup or container filler including film-sealing module. Suitable for various container sizes, shapes, and materials (e.g., PP, PS, PET, paper, laminated films, etc.). Perfect for ready meals, noodles, pasta, dried fruits, snacks, sweets, chocolate, soup powder, frozen meals, yogurt, ice cream, jam, etc. Fully automatic process from cup dispensing and filling to sealing. Compatible with all types of separate dosing systems for liquids, pastes, granulates, powders, etc. Simple operation via touchscreen monitor, stainless steel construction, easy to clean. Print mark sensor. Wide range of sizes and shapes due to the adjustable container tray. – Specifications: Number of lanes: 2; max. idle machine cycle rate: 40 cycles/minute; power supply: 220V, 2.1kW; compressed air: 0.2m³, 6bar; machine dimensions: L3000xW850xH1600mm. Isdpfsv Nkynjx Angjbb The machine/system is also available in additional configurations for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used equipment prices. Feel free to send us your enquiry and let us know your packaging requirements. – We typically have 30–50 different new machines available for immediate delivery from stock. For machines manufactured to customer specification, we offer very short lead times starting from around 3 weeks. – All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Screw conveyor system for powders and very fine granular products. Stainless steel housing with stainless steel tube. Motor and screw conveyor mounted underneath the machine. Feed hopper with a 200-liter capacity and vibration motor for consistent product flow. - Specifications: Throughput depending on product: up to 3 m³/h; maximum batch quantity: up to 5 kg per loading cycle; discharge height: approx. 1,850 mm; standard incline: 45°; pipe diameter: 114 mm; power supply: 380V, 0.81 kW; machine dimensions: size depends on the custom end system (hopper size, conveyor length and angle can be customized – also available optionally: mixing device); weight: approx. 130 kg. The machine/system is also available in other versions for various packaging sizes and speeds. Ijdpev Nk Apofx Angebb Please note that our new prices are often below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with full warranty.

Gamybos metai: 2025, būklė: naujas, Big Bag Discharge System. INCLUDES lifting crane (HITACHI), stainless steel version, and INCLUDES screw conveyor. - Specifications: Capacity: 8-10t/h; max. size for big bags: L1200xW1200xH1100mm; Power supply: 380V, 2kW; Electric hoist speed: 10.05m/min; Lifting speed: 6.8m/min; Machine dimensions: L3200xW1700xH5000mm; Weight: 400kg. Ibsdpov Nk A Ajfx Angob Please note that our new equipment prices are often below typical used equipment prices. Feel free to send us your inquiry and describe your packaging requirements. – We usually have 30-50 different new machines immediately available from stock. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines come with full warranty.

Būklė: naujas, Gamybos metai: 2025, Sample filling system for low-viscosity products (ketchup, jam, sauces, etc.) into bottles, jars, and cans. – Includes container alignment system, bottle/container rinsing, viscosity filler (hot filling), and vacuum capping function. – Specifications: Filling volume 20–1000 ml; bottle sizes: diameter 20–150 mm; cap diameter: 20–70 mm; number of filling nozzles: 4–12; speed: up to 6,000 bottles/containers per hour; fill volume tolerance: ±1%; capping rate: >99%; power supply: 380 V, 3.5 kW; compressed air: 0.6 m³, 6 bar. – Please note: These specifications are for the example system only. Final specifications may vary. Please provide your packaging details (container size and shape, filling product, required speed, etc.) so we can prepare a complete quotation for you. Ibsdpfx Anev Nlbmjgeb Please also note that our new machine prices are frequently below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Fully automatic filling and capping machine for the filling of pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine uses a peristaltic pump system to dose reliably and precisely and securely seals the vials with a lyophilization stopper. The 8-head capping unit is also very fast and precise and is suitable for aluminum screw caps. The vials are guided individually, enabling safe and rapid filling and capping. Included is a collection table for the end product, which can be flexibly combined with the capping machine and the main unit to create a complete line. All machines/modules are equipped with dust protection covers and a laminar flow hood. – Specifications of the filling and capping system: Number of filling stations: 4; number of capping heads for lyophilization stoppers: 1; number of capping heads for aluminum screw caps: 8; filling volume: max. 30ml per vial; speed in idle mode: max. 150 bottles/min (with 4 filling stations and 5ml per vial); accuracy: = ± 1-3%; suitable bottles: glass; power supply: 3.35kW; 220/380V; line dimensions: depending on customer-specific configuration; total weight: approx. 1215kg. The photo only shows the main machine. Images of additional modules are available on request. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – Typically, 30–50 different new machines are immediately available from stock. For customer-specific machines, we offer very short delivery times, starting from approx. 3 weeks. – All machines are available with a full warranty. Ibodpfxsv Nlcde Angjb

Būklė: naujas, Gamybos metai: 2025, Device for sealing (sealing with foil welded onto the rim of bottles, jars, or cans) containers with a neck diameter of 30-90 mm. The operation runs from left to right. - Specifications: max. machine cycle rate (idle): 40 cycles/minute; power: 380V, 2.0kW; machine dimensions: L1600xW800xH1160mm; weight: 180kg. Please note that our new prices are often lower than typical used prices. Feel free to inquire and tell us about your packaging application. - We usually have 30-50 different new machines immediately available from stock. For machines custom-built to customer specifications, we offer very short delivery times starting from around 3 weeks. - All machines are available with full warranty. Iedpfx Asv Nk Tbengjbb

Gamybos metai: 2025, būklė: naujas, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film feed, dual feed possible, air separator/extraction device (removes air from the bag before sealing—no vacuum is created), holding fixture for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost, if required). - Specifications of the VFFS packaging machine: - Filling range: up to 5000 ml - Film width: max. 620 mm - Bag size min-max: L(100-400) x W(180-300) mm - Max. idle machine cycle rate: 45 cycles/minute - Stainless steel 304 - 220 V, 5 kW - 6 bar, 0.3 m³/min - Machine dimensions (L x W x H): approx. 1780 x 1850 x 1950 mm - Weight: 700 kg - Specifications of auger dosing unit: - Filling capacity up to 50 l (hopper) - Filling range: 10-5000 g - Max. idle machine cycle rate: 40 cycles/min - Accuracy: ±0.3~1.5% (depending on product) Ibjdpfov Nmk Ajx Angeb - 380 V, 3 kW - Dosing unit dimensions (L x W x H): 600 x 1250 x 1200 mm - Weight: 220 kg Screw conveyor for automatic material transport to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150 liters capacity. Size depends on the customer-specific final system. - Specifications: Hopper, conveying length, and angle can be adjusted according to customer/product-specific requirements. Overall dimensions depend accordingly. Conveying length: 3~4 m; stainless steel 304; conveying speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Deviations from the stated specifications are possible. Support rod optionally available. The discharge conveyor belt features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions (L x W x H): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2980 x W3650 x H2600 mm, depending on final configuration. The system must be adapted to customer/product-specific requirements. Therefore, there may be deviations in the specified specifications for the modules and machines. Key components: - Color touchscreen display SIEMENS - PLC controller SIEMENS - Servo motor SIEMENS - Cylinder AIRTAC - Solenoid valve AIRTAC - Relay OMRON - Servo motor for film transport SIEMENS The machine/system is also available in different versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used machines. Feel free to make an inquiry and let us know your packaging requirements. Typically, 30-50 different new machines are always immediately available from stock. In addition, we offer very short delivery times starting from approx. 3 weeks for custom-built machines. All machines are available with full warranty.

Gamybos metai: 2025, būklė: naujas, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill and seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen control monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, option for double transport, air separation/extraction device (removes air from the bag before sealing – no vacuum is generated), holder device for heavy finished bags, Euro slot punching device, suitable for OPP and PE film (PE unit may incur additional cost). - Specifications of the VFFS packaging machine: Filling range up to 3000ml; film width max. 520mm; bag size min-max: L(80–400)xW(80–250)mm; max. machine cycles in idle: 50 cycles/minute; stainless steel 304; 220V, 4kW; 6 bar, 0.3m³/min; machine dimensions LxWxH: approx. 1150x1790x1650mm; weight: 600kg. Tank and pump specifications: Tank capacity approx. 50L (customizable); height: approx. 70mm; pump available in various versions, e.g.: 10~150ml, 150~500ml, 500ml~1L, 1L~2L, 2L~5L, etc. The pump system is adapted to client products based on sample provision. Specifications and product feeding may vary accordingly (additional charges may apply). The discharge conveyor has a stainless steel frame. - Specifications: Conveyor speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Complete system dimensions: approx. L1080xW3640xH1720mm, depending on final configuration. The system must generally be customized to customer/product-specific requirements. Therefore, the stated specifications for the modules and machines may vary. Core components: Colored touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. Ibedpsv Nmlajfx Angob The machine/system is also available in additional versions for different packaging sizes and packaging speeds. Please note that our new prices are often lower than the typical used equipment prices. Please do not hesitate to consult us and provide details of your packaging application. - Typically, 30–50 different new machines are available for immediate delivery from stock. For custom-manufactured machines, we offer very short lead times starting from 3 weeks. - All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, I-, Z- or L-shaped belt conveyor for transporting small and large-volume, wet/damp, or deep-frozen products to the weighing unit. Open design, corrugated sidewalls, water-resistant, all product-contact parts made of polyurethane and certified according to FDA 21 CFR 177.2600. - Specifications: Conveyor tray dimensions: L (customizable to product)xW250xH50mm; stainless steel frame; adjustable conveyor speed; conveyor dimensions: L (depending on conveyor incline)xW450xH3000mm. The machine/system is also available in other versions for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual used equipment prices. Feel free to send us an inquiry and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock at any time. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty. Ibodpsv Nml Tsfx Angjb

Būklė: naujas, Gamybos metai: 2025, Feed conveyor belt, transport system with extra-large plastic containers that convey the product from the vibrating feeder to the weighing unit. Stainless steel; 380V/1kW; dimensions and weight depend on the customer-specific overall system. Ijdpfx Ansv Nmmwsgjbb The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Simply send us an inquiry and tell us about your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. In addition, for custom-built machines we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Weighing unit with 10 weighing heads (containers), each with a volume of 0.8 liters for extremely precise weighing. - Specifications: Accuracy: +/- 0.3–0.8g; maximum machine cycle in idle mode: 70 cycles/minute; suitable for weights from 15–300g; stainless steel; 220V/1.5kW; dimensions and weight: L1336xW930xH1146mm, 400/500kg. The machine/system is also available in additional versions for various packaging sizes and packaging speeds. Iedsv Nmn Iepfx Angsbb Please note that our new prices are often below the typical prices for used equipment. Feel free to contact us and let us know your packaging requirements. – From stock, there are usually 30–50 different new machines available immediately. For machines manufactured to customer specifications, we offer very short delivery times from around 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Sleeve packer/film banding machine for packaging very large products. Includes shrink tunnel. The film overlaps underneath the product and is fused by heat (no welding). Automatic product feed, automatic transport into the tunnel and discharge. - Sleeve packer specifications: max. machine cycle speed (idle): 20 cycles/min; max. product dimensions: L (unlimited) x W (W+H max. 600mm) x H (max. 300mm); film width: max. 1600mm; sealing bar length: 700mm; operating temperature: up to 200°C; conveyor height: 850mm +/-50mm; power supply: 220/380V, max. 1.8kW; air pressure: approx. 6-8bar; machine dimensions and weight: L2014 x W1488 x H1850mm, 600kg. Ibjdpfx Asv Nl Rhsngsb - Shrink tunnel specifications: max. product dimensions: L (unlimited) x W 400 x H 300mm; operating temperature: up to 400°C; conveyor height: 850mm +/-50mm; power supply: 220/380V, max. 20kW; tunnel dimensions: L1500 x W600 x H400mm; machine dimensions and weight: L2400 x W900 x H1690mm, 500/550kg. Please note that our new machine prices are often below the standard second-hand market prices. Feel free to contact us and tell us about your packaging requirements. We usually have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Side sealer for full enclosure of products in heavy-duty PE film. All four sides are completely sealed. XL version designed for especially large products, including a matching shrink tunnel. Ideal for dust protection and as transport packaging. Cost-effective packaging solution even for large products up to W+H. Iedov Nl Rnepfx Angebb

Būklė: naujas, Gamybos metai: 2025, Sidesleever for the total sealing of products in heavy-duty PE films. All four sides are completely sealed. XXL version for very large products, including a matching shrink tunnel. Ideal for dust protection and as transport packaging. Cost-effective packaging solution even for large products up to W+H. Isdpfx Ansv Nl Ruogebb

Būklė: naujas, Gamybos metai: 2025, High-speed sleeve shrink machine for multipack packaging of bottles, cans, etc., including module for automatic insertion of cardboard trays beneath the multipacks, as well as shrink tunnel. Suitable for container arrangements of 2x3, 3x4, 4x6, or other configurations. Compatible with PE shrink film of 60–100µm thickness, film shrinkage crosswise: 30–40%, lengthwise: 60–70%. – Specifications: PLC control and touchscreen by SIEMENS, AC switches by SCHNEIDER, cylinders from FESTO, SIEMENS servo motors for film feed and cutting. Bottle size (cans or containers): 0.25 to 1.5 liters, diameter: 50–120mm, height: 120–300mm; maximum dimensions for complete multipack: L(150–720)xW(250–450)xH(120–300)mm; maximum machine cycle rate (idle): 45 cycles/minute; machine dimensions: L6800xW1650xH2270mm; weight: 5500kg; power: 380V, 9kW (machine) and 380V, 63.75kW (shrink tunnel); compressed air: 160 liters/min, 6 bar. Ibsdpfx Anev Nl R Iegeb Please note that our new machines are frequently offered at prices lower than the typical used machine prices. Simply make an inquiry and tell us about your packaging application. – Usually, 30–50 different new machines are available for immediate delivery from stock. For machines manufactured to customer specifications, we offer very short lead times from about 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Shrink tunnel for extra large/wide products. Suitable for polyolefin films. Adjustable speed and temperature. Can be combined with the SIDEshrink W20-XXL. Isdpfx Aev Nl Tijngobb - Specifications: 380V, 15 kW; Speed: max. 15m/min; Max. product size (mm): W1500 x H250 (can be adjusted as needed); Machine dimensions: L2840 x W1560 x H1310mm; Weight (net/gross): 450/550kg. Please note that our new prices are often lower than common used equipment prices. Feel free to contact us and let us know your packaging requirements. There are usually 30–50 different new machines available from stock at any time. In addition, customer-specific machines can be delivered within very short lead times, starting from approximately 3 weeks. All machines are available with a full warranty.

Gamybos metai: 2025, būklė: naujas, Complete version of the vertical packaging system with volumetric dosing unit, 1 cup, single-vessel conveyor, and discharge conveyor belt. Suitable for packaging granular products such as sugar, rice, nuts, etc. The vertical form-fill-seal packaging machine (VFFS) comes equipped with the following components: PLC (touchscreen operation monitor, available in various languages e.g., English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport option, air separation/extraction device (removes air from the bag before sealing – no vacuum is created), holding device for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit optionally at an extra charge). - Specifications of the VFFS packaging machine: filling range: 150-1200ml; film width: max. 420mm; bag size min-max: L(60-300)xW(60-200)mm; max. machine cycle speed in idle: 50 cycles/minute; stainless steel 304; 220V, 2.2kW; 6bar, 0.3m³/min; dimensions of the packaging machine: LxWxH: approx. 1080x1300x1400mm; weight: 500kg. The dosing unit’s cup has a filling capacity of up to 50l. The single-vessel conveyor also provides a filling capacity of up to 50l. The container is filled manually in the lower position and automatically emptied in the upper position (complete cycle: 1 minute). - Specifications: height: 3-5m; machine dimensions: L1400xW700xH3500mm; 220V/1kW. Variations possible. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total system dimensions: approx. L1080xW4550xH3500mm, depending on final configuration. The system must always be adapted to customer/product-specific requirements; therefore, deviations from the stated specifications of the modules and machines are possible. Main components: colored Siemens touchscreen display, Siemens PLC controller, Siemens servo motor, Airtac cylinders, Airtac solenoid valve, Omron relays, Siemens servo motor for film transport. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are often below typical used prices. Simply ask and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. - All machines come with a full warranty. Isdpov Nmi Ssfx Angjbb