Seca Širdies Monitorius pirkti naudotą (2 756)

Būklė: naudotas, Gamybos metai: 2023, x-axis travel: 3000 mm y-axis travel: 820 mm z-axis travel: 720 mm Control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speeds: 35 - 12,000 rpm Spindle drive: 15 kW Distance spindle nose to table top: 140 - 860 mm Table load capacity: 2500 kg Rapid traverse x/y/z: 50 m/min Table width: 3500 mm Table length: 820 mm Table height above floor: 870 mm T-slots: 7 T-slot width: 18 mm T-slot spacing: 100 mm Tool changer: 48 positions Tool change time: 4.7 sec Tool diameter with 2 free positions: 130 mm Tool diameter (full magazine): 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 - 9 bar Air consumption: 260 l/min Electrical specification - voltage/frequency: 400 V / 50 Hz Coolant tank capacity: 500 l Total power consumption: 46.7 kW Machine weight approx.: 15.4 t Redpfxsyvvluo Ahgew Space requirement approx.: 5.3 x 3.6 x 3.3 m Standard machine including the following special accessories: - Preparation for dual oil mist extraction - Air cooling through the rotating milling spindle - 48-position tool magazine - Handwheel (pulse generator) - 3-color LED signal light - Additional workspace illumination - Air blowing device at the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Preparation for MAZAK Monitoring - Chip conveyor, discharge left side (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with programmable chip breaking - Synchronous tapping - Rapid traverse with constant inclination angle STANDARD ACCESSORIES - Transformer for the European market - USB port (1 connection) - Mazak standard paint - Workspace illumination SAFETY EQUIPMENT - Operator door with interlock switch - Work area enclosure - Splash guard encloses the work area from the sides - Fully enclosed work area - Protection against chips, coolant, and access to the work area during automatic operation - Safety devices compliant with global standards COOLANT SUPPLY - Coolant supply through spindle (pump pressure = 5 bar) - Complete coolant system including pumps, valves, piping, and nozzles for efficient production of quality components FACTORY AUTOMATION - Automatic on/off and warm-up function - Automatic warm-up activation via digital timer switch MEASUREMENT SYSTEM - Tool length measurement and tool breakage detection NUMERICAL CONTROL - Horizontally adjustable NC operating panel - Relocation Detector - Mazatrol SmoothG control - 19" LCD color touchscreen - Mazak thread drilling/drilling cycle Tornado (Mazatrol) - EIA/ISO input function - Background toolpath simulation - 3D coordinate transformation - Form compensation for rotary axes - Mazacc-2D software (contour compensation) - Mazacc-3D software package - MAZACC-3D high-speed software package (NO456) additionally required - High-smoothing control - LAN interface - SD memory card interface - Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Form compensation for rotary axes - NO497 D) High-accuracy control for finishing operations - Seamless corner control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse path rounding function - Absolute positioning system - All dimensions, weights, and performance data are non-binding - - Used ma...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, The machine can be used as a fully functional universal machining center! We offer: Manufacturer: DMG MORI Model: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travel paths: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotation range: 360° Swivel range: +/- 120° Main spindle: Max. spindle speed: 20,000 rpm Spindle drive power (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool pockets: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fiber-guided diode laser Power: 2,500 W Fiber diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations Rjdpfsyz Si Tsx Ahgjw Production package, consisting of: - Scraper belt chip conveyor - Coolant system, 600 l tank - Paper band filter - ICS 40 bar - Chip flushing in the work area door - Rinse pistol, 3 bar - Oil and emulsion mist extraction unit - Cooling unit, air blast through spindle center - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - 3D quickSET prep - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Platform grating Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Setup camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser protection window Extended powder feeder, consisting of: - Twin system (dual-channel material feeding) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for constant material delivery - Automatic switching or mixing via simultaneous operation of both powder containers using NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in the scope of delivery only if indicated in the additional information. Subject to changes, errors in the technical specifications and details, and prior sale!

Būklė: naudotas, Gamybos metai: 2020, Turning diameter 380 mm Turning length 511 mm Control Mazatrol SmoothG Turning diameter over cross slide 276 mm Max. swing diameter over bed 675 mm Standard machining diameter 276 mm Bar capacity 65 mm X-axis travel 234 mm Rapid traverse X-axis 30 m/min Z-axis travel 625 mm Rapid traverse Z-axis 33 m/min Speed range 35 - 5000 rpm Spindle nose A2-6 Spindle bore 76 mm Power (40% duty cycle) 26 kW Rated power (100% continuous operation) 22 kW Max. torque 465 Nm Speed 6000 rpm Main drive power 11 kW Max. torque 90 Nm Milling spindle speed (driven tools) 35-6000 rpm Max. torque at milling spindle: 47 Nm Drive power - milling spindle 5.5 kW (40% duty cycle) Milling spindle power (continuous operation) 3.7 kW Number of tool stations 12 (driven) Tool cross section (external) 25 sq mm Boring bar diameter 40 mm Drill diameter 20 mm Milling cutter diameter 20 mm Tapping diameter M20x2.5 Turret indexing time approx. 0.20 sec Coolant tank 180 l Connected load 46.2 kW Machine weight approx. 5.9 t Space requirement approx. 2.7 x 1.9 x 1.9 m Machine is in as-new condition Including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) max. flow rate 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/connection 98mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preparation for use of a hollow clamping cylinder on sub-spindle - Hollow clamping device including draw tube + cylinder - Hainbuch Spanntop Nova Axfix mini size 52 collet chuck - Hainbuch Spanntop Nova Axfix special mini size 52 chuck - 2 x collets - Collet change device STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device at chuck on sub-spindle Linear guide system with guide carriages USB interface (1 port) Set of manuals in electronic form on CD C-axis main spindle input accuracy 0.0001° Sub-spindle positioning without C-axis input accuracy 0.001° Rodpfotugggox Ahgew 12-station VDI turret Operator door with safety interlock switch Double foot switch for main and sub-spindle Hydraulic pressure locking Fully enclosed work area, work area lighting Safety devices to worldwide standards High-performance coolant system (520W), max. flow rate 11.5 l/min. Complete coolant system Automatic opening/closing of chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (side) Synchronization of main and sub-spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color display (touch screen) User macro (600 variables), EIA/ISO input function Optional stop function Tool path verification in background Thread cutting function (G33), polar coordinate input (EIA) Drawing data direct input function LAN, SD memory card interface - Used machine, sold as is, without warranty -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22” LCD monitor with touch screen, USB ports as well as integrated UPS, DigiSoft software – demonstration machine – The machine is under power and can be inspected by appointment! Technical Data: Year of manufacture: 2025 Max. pressing force: 400 kN / 40 tons Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Average speed: 35.8 mm/sec Programmable programs / stored sequential bends: 50+5 (punching) Number of individual bends / sequential bends: 16 Worktable dimensions: 580 x 1230 x 925 (H) mm Redpfxeyw Rxfo Ahgew Tool fixing holes in the worktable: 4 x Ø 80 mm Working height: 925 mm Oil tank capacity: 40 l Motor power: 5.5 HP / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Bending height extra high: 400 mm Shearing max. capacity 40 kg/mm² (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm² (mild steel): Ø 30 x 10 (thickness) Straightening: 200 mm Two-jaw bending: Ø 60 mm Rotary bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm

Būklė: naudotas, Single-Column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Daylight opening: 700 mm Table area: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping shank bore: Ø 40 mm Table height above floor: 855 mm Rapid approach speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 control - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer Rsdpfxjhrakve Ahgjw - Pressure setting infinitely variable via manual pressure regulator - Short-stroke function - Mechanical tool clamping on the ram with T-slots and clamping shank bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control prepared for electrical tool monitoring - Hydraulic and electrical circuit diagrams available Required floor space (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Būklė: naudotas, 2-axis pick-and-place unit, feeder, servo robot, workpiece gripper, loading machine, unloading robot, removal device, handling unit for presses, lathes, etc. GETECHA Type GL-20S Serial No. 13836 Year of manufacture: 10/2003 Travel distance Z-axis: 1900 mm Travel distance Y-axis: 250 mm Travel speed Z-axis: max. 1100 mm/sec Rjdpfxjharwys Ahgew Travel speed Y-axis: max. 227 mm/sec Continuously variable travel speed in Y and Z axes via SMB servo motors - Precise axis movement via linear guides - epis control system - Separate operator panel - Control outputs for conveyor belt, gripper magnets, ejector cylinders, vacuum, and gripper - External safety monitoring inputs for emergency stop, press open/closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25,998 hrs The system was used as a loader/unloader on a press. Dimensions (L x W x H): 2,900 x 1,800 x 2,000 mm Weight: approx. 800 kg Good condition

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 290 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Robust top-quality design with long cast iron tables, brushing and finishing device, and conveyor belt feed. Suitable for high continuous loads even with higher material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad enables high material removal with a uniformly flat contact area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional accuracy - Auxiliary cooling of sanding zones for cooler sanding and longer abrasive belt lifespans - Forced-guide pneumatic belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom side) via precision lead screw with measurement display via dial ring (resolution 0.1mm) - Abrasive belt tensioning via pneumatic cylinder with constant clamping pressure - Quick abrasive belt change with pneumatic belt release in seconds - Adjustable belt tracking during changeover - Electro-pneumatic compressed air monitoring - Feed safety device via contact roller for excessively thick workpieces - Workpiece transport via calibrated slip-resistant and non-slip conveyor belts over heavy, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Continuously variable feed gear motor for rapid adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the infeed side - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fiber brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE version ----- Price of the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece blow-off: - Arranged via nozzles above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off: - Via nozzles directly at the radii of the tension rollers, situated within the dust extraction, timer-controlled on/off, each 5 sec, can be switched on separately Disc unit ... Rsdsyrty Tepfx Ahgow

Būklė: naujas, Pressure: 1500 Cylinder: Fixed Stroke: 350 mm Gap Width: 1500 mm Working Speed: 3 mm/sec Rapid Traverse: 22 mm/sec Length: 2500 mm Rodpfswwnhdsx Ahgew Width: 1200 mm Height: 2500 mm Approx. weight: 2450 kg Height-adjustable work table – conveniently adjustable via chain Safe two-hand operation – user-friendly control via hand lever and push button Adjustable maximum pressure – individually settable for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and comprehensible, available in German and English Two working speeds – for particularly precise and efficient operation Image is for illustration purposes only

Būklė: naujas, Laser power: 12 kW Working area: 1500 x 3000 mm Loading capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (LxWxH): 10,000 x 400 x 2,120 mm The FLC Series is a fast, precise, reliable, and cost-efficient fiber laser cutting machine. It is a high-efficiency laser cutting machine built to upper-class standards. With a laser power capacity of up to 30,000 W, it is an excellent choice for cutting thick plate material. FLC fiber laser cutting machines are commonly used for processing agricultural machinery, textile machinery, food machinery, construction equipment, elevators, and other large machinery and components. This is an ideal cutting machine for those looking to outsource cutting services. Easy control of blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Includes standard nesting software that quickly nests parts for cutting with minimal operator intervention and features flycut cutting technology. Thanks to the dual-exchange table, cutting can continue without waiting time. All our machines are manufactured according to European standards and come with CE certification. Our FLC series machines feature automatic nozzle cleaning and a dual camera system. Available cutting area options: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus, active collision avoidance, and auto-view functions that detect obstacles and reposition automatically. The cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction, ensuring rigidity and preventing deformation under impact, overlap, or load. This single-piece design enables high speed and acceleration with lower motor power, being three times lighter than steel profile bridges. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Flycutting - Nozzle and lens starter kit - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS Working area: 1500 x 3000 mm Loading capacity: 1200 kg XY-axis travel: 1520 x 3030 mm Z-axis stroke: 300 mm XYZ-axis guide: 4-point ball cage XY-axis drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 sec Laser source: Raycus / Hans / JPT Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: FSCUT Laser cutting head: Raytools / BOCI / WSX Supported gases: Air / Oxygen / Nitrogen Cooling type: Water cooling Machine weight: 12,000 kg Redpfx Ahsruwa Tjgsw

Būklė: naujas, Laser power: 3Loading capacity: 1250 x-travel: 2020mm y-travel: 4050mm z-travel: 350mmPositioning accuracy: 0.05mmRepeatability: 0.03mmTable changeover time: approx. 10sCoolant system: Water chillerApprox. weight: 11,500kgDimensions (LxWxH): 4400 x 10000 x 2120mm The FLC series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system meeting upper price class standards. With support for up to 30,000W laser power, it's an excellent choice for thick plate cutting. FLC fiber laser cutters are typically used for processing in the production of agricultural machinery, textile machinery, food processing machines, construction equipment, elevators, and other large machinery and plants. It's an ideal cutting solution for anyone looking to outsource their cutting operations. Features allow for simple blowing, cutting, pausing, calibration simulation, etc., with wireless remote control. Standard nesting software package ensures workpieces are ready for cutting very quickly and with minimal operator intervention. Fly-cutting capability is also included. Thanks to its dual shuttle table, cutting can continue without downtime. All our machines are manufactured to European standards and are CE certified. Our FLC series machines offer nozzle cleaning and dual camera systems. Available cutting areas: 1.5x3m, 2x4m, or 2x6m. Our laser head features autofocus, active anti-collision system, and auto-view functionality, recognizing obstacles and moving automatically. Redpfxotuyf Hj Ahgew Cutting heads are equipped with automatic cooling. All machine bridges consist of one-piece welded aluminum alloy plate construction. One-piece design ensures rigidity and prevents deformation of the bridge under impact, overlap, or load. Their significantly lower weight (three times lighter than steel) enables higher speeds and acceleration with less motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch CNC touch controller - Fly-cutting function - Nozzle and lens starter kit - Scrap drawers for parts - Automatic table shuttler - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area 2000 x 4000 mm Load capacity 1200 kg XY travel 2020 x 4050 mm Z-axis travel 350 mm XYZ axis guidance 4-point ball cage XY drive system Rack and pinion Z-axis drive system Ball screw XY traverse speed 100 m/min Z traverse speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table changeover time 10 sec Laser source Raycus / Hans / JPT Laser power output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen

Būklė: naudotas, CNC 3D Coordinate Measuring Machine (CMM), Measuring Machine MORA Type Pico 0245.04.05.06 Machine No.: Year of manufacture: 2005 Measuring range: X = 600 mm, Y = 500 mm Measuring height (Z-axis): 400 mm Machine table: Granite plate, 1250 x 1200 mm Plate thickness: 200 mm Clearance in machine frame: 720 mm Axis travel speed – setup: max. 65 mm/sec Axis travel speed – rapid traverse: max. 250 mm/sec Power supply: 400 Volt, 50 Hz - Granite plate with 200 mm threaded grid Redpsrdlrxsfx Ahgsw - RENISHAW PH10T motorized indexing/rotary probe head with interchangeable TP20 touch probe - 1 probe holder with manual adjustment - Various probe styli - Axis control: Gemodek Microspeed 10 in adjacent control cabinet - Manual control via hand controller with joystick and LCD display - Reference sphere included on the table - PC for measurement software: Intel Pentium 4, 512 MB RAM, mounted in machine base - 22-inch TFT monitor - Operating system: Windows XP - Measurement software: INCA 3D (license expired) The measuring machine was operated under a rental license and maintenance contract Space required (W x D x H): 1950 x 1800 x 2450 mm Machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Būklė: naudotas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned in 2017 Rsdot Ac Efjpfx Ahgsw with SIEMENS 840D SL (Solution Line) CNC path control, featuring 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swiveling gantry +/– 135° (270° total) B-axis 360° continuous Axis acceleration X + Y axis 6 m/s² Axis acceleration Z axis 9 m/s² Feed force X + Y axis 7500 N Feed force Z axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Swiveling speed A-axis 180° rotation in 4 sec. Interference diameter in swivel bridge max. 1400 mm Transport load capacity in swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent tools occupied Ø 140 mm Tool diameter with adjacent tools free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Mains connection 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5–8 bar - Motor spindle LIFLEX MSP 80/63/85/12,000 (power 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary swivel table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on rotary table of swivel axis - Double pallet changer, without pallets (pallets need to be procured) - Media transfer via 5 single-acting pressure lines for oil or air, for workpiece clamping on pallets Hydraulic functions from 30–150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool stations, in disc-type turret design - Machine designed for dry machining with MMS (minimum quantity lubrication system) - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient unit operation) - Direct measuring system on all axes - Readout operating hours, control voltage on = approx. 7500 h Space required for operation L x W x H 9000 x 5000 x 3800 mm Space required for transport L x W x H 6100 x 4400 x 3600 mm Base machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Būklė: geras (naudotas), Relay, time relay, heating current monitoring, preheating for generators, contactor, solid-state contactor -Timer: 1.5–30 sec -Voltage: AC/DC 24 V 50-60 Hz -Price: per package -Quantity: 7 available Rodpfxsb A Skls Ahgew -Weight: 0.2 kg

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 250 mm, tekėjimo ilgis: 500 mm, tekėjimo skersmuo: 250 mm, veleno skylė: 71 mm, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 215 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 20 m/min, greitasis eiga Z ašyje: 20 m/min, bendras aukštis: 1 800 mm, bendras ilgis: 4 000 mm, bendras plotis: 1 900 mm, bendras svoris: 5 000 kg, CNC Fanuc 18i - T CAPACITY: Maximum bar machining diameter: 54 mm Maximum secondary operation machining diameter: 250 mm Maximum machining length: 500 mm Maximum swing diameter: 520 mm MAIN SPINDLE: Rotational speed range: 40 – 4,000 rpm Spindle nose: ASA 6'' Spindle bore: 80 mm Chuck diameter: 250 mm Motor power: 11/15 kW (50%) SUB-SPINDLE: Rotational speed range: 40 – 4,000 rpm Spindle nose: ASA 5'' Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Indexing time: 0.6 sec LIVE TOOLS: Number of positions: 6 Rotational speed range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct) Minimum programmable value: 0.001° Maximum rapid traverse speed: 80 rpm Rodpey I A Imefx Ahgew AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Tank capacity: 200 L Pump rate: 100 L/min DIMENSIONS: Footprint with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine equipped with: • Drilling kit with opposing B-axis tailstock for simultaneous turning • 9 bar pump • 150 mm part removal paddle • Monitoring system • Spindle bore 71 mm • Simple collet chuck, cone 42 • 165 mm diameter chuck • Operating manuals and CE declaration

Būklė: naudotas, Gamybos metai: 1996, Pressure 130 t Bending length 3060 mm Frame width 2690 mm Frame throat depth 410 mm Stroke 215 mm Installation height 385 mm Approach speed 200 mm/sec Working speed 1-10 mm/sec Return speed 135 mm/sec Table width 120 mm Redexabqbopfx Ahgew Table height 1050 mm Tiltable up to +/- 10 mm Operating hours 53,820 h Compressed air 5.0 - 7.0 bar Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 16.0 KVA Machine weight approx. 11,250 kg Dimensions L-W-H 3640 x 2210 x 2375 mm - in inspected condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphical programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC-controlled axes: Y1 + Y2 / X / R - CNC electro-mechanically controlled backgauge (X axis) - CNC electro-mechanically controlled height adjustment (R axis) - Manual adjustment of the 2x stop fingers, from the front (Z axes) - Manual adjustment of the die shift, from the front (I axis) - WILA manual table crowning, incl. analog value display - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device on the side (swiveling door) - Original operating instructions + CE declaration + wiring diagram

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Pressure: 85.0 t Bending length: 2050 mm Frame width: 1650 mm Throat depth: 400 mm Stroke: 240 mm Installation height: 320 - 560 mm Approach speed: 150 mm/sec Working speed: 15.0 mm/sec Return speed: 150 mm/sec Backgauge – adjustable: 5.0 - 1000 mm Table width: 110 mm Working height: 1050 mm Max. operating pressure: 297 bar Compressed air: 4.5 - 6.0 bar Oil capacity: 200 l Operating pressure: 340 bar Total power requirement: 7.5 kW Machine weight approx.: 5900 kg Dimensions (L x W x H): 4100 x 2100 x 2750 mm With increased installation height / piston stroke Well maintained condition (!!) — in inspected condition — Machine video — ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - Includes CYBELEC CNC control unit * Swivelling control panel front right * External monitor - CNC axis control: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC servo-motorized backgauge (X axis) * Travel range: 5.0 - 1,000 mm * Travel speed: 250 mm/sec. - CNC servo-motorized height adjustment of backgauge (R axis) * Travel range: 70 - 235 mm * Travel speed: 100 mm/sec. Rodpfx Ahsxab Ugogow - CNC servo-motorized adjustment of backgauge fingers (Z axes) * Z1 travel range: 405 - 1,565 mm * Travel speed: 1,000 mm/sec. * Z2 travel range: 485 - 1,645 mm * Travel speed: 1,000 mm/sec. - CNC servo-motorized table crowning - CNC pneumatic die shifting (I axis) - EHT pneumatic tool clamping – upper tool * Includes segmented upper tool set - EHT manual tool clamping – lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x movable two-hand/foot control - 2x front sturdy support arms incl. "Sliding System" - Side safety guard (swivelling doors) - Rear safety guard (swivelling door) - Original operating manual + wiring diagram, etc. * Special accessories included: - Oil cooler for continuous operation

Būklė: naujas, Gamybos metai: 2025, AVEREX HS-540i GTS 2-APC, New machine Horizontal machining center with option for the adaptation of an optional pallet rotary magazine (6-APC or 8-APC) Standard Equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - LCD color screen with 15" diagonal, MANUAL GUIDE i, QWERTY keyboard - iHMI – intelligent human-machine interface - Program memory with 2 MB (megabytes) and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with look-ahead function reading 200 blocks in advance - HRV3+ servo drives (digital servo current control) - JERK control - Fine Surface Technology (high-speed, high-quality machining) Rodpfjwxdpgjx Ahgsw - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card slot (PCMCIA Flash-Card) and USB port - Network interface RJ45, embedded Ethernet - Enhanced embedded Ethernet functionality - Weekly timer: automatic power on/off of the machine - High-speed skip function - Tool offset memory C - 400 pairs of tool offsets - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100 - #199, #500 - #999) - Program restart - Helical interpolation - Cylindrical interpolation (G07) - Fixed cycles for drilling - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring and scaling - Polar coordinates programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional block skip function, up to 9 blocks - User-custom macro programming Travel - Axis travel X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0 – 40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole pattern: 5x 5 M16 x 25mm/deep, spacing 100 mm - Load capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from the floor: 1,100 mm - Standard preparation for retrofit with a 4-fold pallet magazine (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (opt. SK-40 DIN69871 or HSK-A63) - Magazine capacity: 80 tools - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent pockets empty: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: fixed location/random access - Speed: 16 sec. for 80 tools - Tool change time: 0.9 sec./2.1 sec. (heavy tool) - Chip-to-chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full-featured 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide carriages X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screw Coolant, chip, and compressed air management

Gamybos metai: 2016, būklė: beveik kaip naujas (naudotas), Double-Column CMM Redpfx Ahsh T U Dfogow * Installation flush with floor Measuring Range * X 6,000 , Y 1,600 , Z 2,500 [mm] * Column overlap in Y = 100 mm Measuring Uncertainty Single column: 25 + L/70, max. 60 [µm] at L=6,000 mm Double column: 50 + L/70, max. 100 [µm] at L=6,000 mm Dynamics 3D Traversing Speed: 400 mm/sec 3D Acceleration: 1200 mm/sec² Probe System (per column) * Renishaw PH10M * Renishaw TP20 + 2 modules Control System (per column) * WENZEL WPC2040 (Pantec Eagle Pro) Wireless Control Unit * Handheld operator control HT400 Software * POLYWORKS * Alternative solutions possible Accessories * Calibration sphere holder – 3 positions populated * Styli assortment * TP-20 modules * Computer, monitor, keyboard (per column) Supplier Services * Transport, commissioning, calibration, final acceptance Warranty * 12 months from date of acceptance

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar loader, and discharge unit Year of manufacture: 2007, factory overhaul 2017 Operating hours: approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle 15,000 rpm Travel distances: X 450mm / Y 270mm / Z 310mm Rapid traverse X / Y / Z 75 m/min, acceleration: X 1g / Y 1.5g / Z 2g 40 tool positions, HSK-A 40, chip-to-chip time 2.6 sec. vertical (as per DIN) Additional equipment: Prepared for bar machining AWU 160 rotary table package with D105mm (positioning axis) Hainbuch collet chuck Spanntop D100, additional device for 6th side machining Part removal and discharge unit for finished parts Bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine pre-equipped for high-pressure coolant, 70 bar (variable valve), fixture flushing Scraper conveyor with discharge height 1050 mm Vacuum rotary filter VRF 400 ltr. Manufacturer: KNOLL MAHLE dual changeover filter Electrical cabinet cooler, signal tower Tool life monitoring Tool breakage control Single F500, 3D probe system Renishaw TS27R Brankamp Marposs CMS 100 collision monitoring Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) Rodpfxsypbmcs Ahgew Tool holders HSK-A40 Spare parts for this machine type, including special operating fluids Note on machine concept: Fully automated 24/7 complete machining of cubic parts. Material feed via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of the 4 lateral sides via vertical milling spindle. Face (5th side) machined horizontally with swivel head. Clamping of the workpiece via vices, sawing off the workpiece, and 180-degree rotation; machining of the 6th side horizontally also with a swivel head. Part removal and discharge system feeds into part storage. Note on machine condition: The machine underwent a factory overhaul and technical update at Chiron (CMS) in 2017. The last spindle replacement was carried out in September 2025. The machine was last serviced by the manufacturer in October 2025 (major annual service, 4,000 h). From purchase until today, the machine has been continuously maintained, repaired, and kept up to date technically by the manufacturer under a full service contract (preventive maintenance).

Būklė: labai geros būklės (naudotas), Mathis THN 10988 Laboratory Thermosol Unit Application This pad-dryer combination has proven highly effective in practical applications. It is used in this configuration for a wide range of hot air treatment processes such as drying, fixing, condensing, thermosoling, etc. The system is utilized wherever a certain sample size is required, for example, to produce sample collections or similar items. Dryer THN If you require all of the above-mentioned application possibilities and need to use pin frames when operating the dryer standalone, the THN type is the recommended model. The standard pin frames are suitable for a maximum sample size of 50 x 50 cm (larger pin frames available upon request). Frames are available as longitudinally adjustable frames for woven fabrics or as longitudinally and width-adjustable material holders for knitted and warp-knitted fabrics, nonwovens, etc., as well as clamping frames for films and paper. Drying Chamber The drying chamber, complete with electrical control cabinet and operator panel, is mounted on a base frame and bolted into a single unit. Excellent thermal insulation of the dryer is ensured by a double-wall construction with intermediate insulation. The nozzle field, 1300 mm in length, is divided into an upper and lower section. An adjustment flap allows for uniform airflow from above/below, or for directing more air from above or below as desired. Fan and Heating Intensive air circulation is ensured by a high-performance fan (capacity approx. 900–3500 m³/h) combined with a carefully matched heating capacity, resulting in optimal evaporation performance. A dual-protected monitoring system reduces maintenance requirements and enhances operational safety. The heating capacity is designed for rapid heat-up; once the desired temperature is reached, it is automatically reduced to avoid unnecessary power peaks. Temperature control is provided via an electronic measurement and control unit in the range of 20–250°C. Fresh air is supplied directly to the recirculation fan via a fan. The required amount can be set using a multi-stage switch. Technical Data - Air speed: approx. 4–12 m/sec - Air volume: approx. 900–3500 m³/h - Temperature range: up to 250°C - Heating capacity: approx. 27 kW - Nozzle field: 1300 mm - Adjustable fabric tension - Multi-stage adjustable fresh air supply - Dimensions (LxWxH): 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is available. komplett-konzept.leasingo.de Further items in various sizes—new and used—can be found in our shop! Rjdpfxeu D Arie Ahgjw International shipping rates available upon request!

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Feed belt speed: 10 m/min - Belt dimensions: 420x1800 mm (please consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operation from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Pneumatic pressure sanding pad - Automatic belt rotation direction change MACHINE CHARACTERISTICS: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (protected at 35A) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and lift-off of rollers - Pneumatic supply: 6 to 8 bars - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m3/h Velocity: 20 m/sec - CE marking, front/rear emergency stops, lockable main isolator Note: For your satisfaction, we remind you that belts must be slackened when the machine is not in use and that all moisture must be avoided, including condensation (dew point) inside your premises in winter. Dimensions: 1500x1300x2050 h.mm Weight: 1200 kg Rjdpfx Ajx A Unxehgjw

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 101.116, Gamybos metai: 2001, veikimo valandos: 2 133 h, keliamoji galia: 9 000 kg, kėlimo aukštis: 3 000 mm, laisvas kėlimas: 200 mm, apkrovos centras: 600 mm, stiebo tipas: dupleksas, TECHNINĖ INFORMACIJA Keliamoji galia: 9 000 kg (trumpam laikui galima pakelti iki 10 t) Kėlimo aukštis: 3 000 mm Laisva eiga: 200 mm Krovos centras: 600 mm Bendras aukštis: 2 480 mm Šakių ilgis: 1 650 mm Šakių plotis: 150 mm Šakių storis: 70 mm Posūkio spindulys (išorė): 2 900 mm MAŠINOS DUOMENYS Kuro tipas: dujos Stiebo tipas: Duplex Variklio gamintojas: Perkins Pavarų dėžės tipas: hidrostatinė Galia: 55 kW (74,78 AG) Variklio apsukos: 2 300 aps./min Priekinės padangos: vientisos (nepaliekančios žymių) Galinės padangos: vientisos (nepaliekančios žymių) Rodpszd Sg Usfx Ahgjw Hidraulinė talpa: 120 litrų Darbinė įtampa: 12 V Triukšmo lygis: apie 85 dB(A) IŠMATAVIMAI IR SVORIS Ilgis (iki šakių atramos): 3 050 mm Plotis: 1 550 mm Ratų bazė: 1 950 mm Savaiminis svoris: 14 500 kg Maksimalus važiavimo greitis: 10 km/h Įkalnės įveikimas: 15 % Darbo valandos: 2 133 h ĮRANGA Prikabinimo įtaisas Apšvietimas CE sertifikatas Pilna dokumentacija su atsarginių dalių sąrašu Kabina Padėklų šakės Šoninis poslinkis UVV (techninės saugos patikra) Hidrauliškai stumdoma kabina Pasukama kolona su teleskopiniu strėle Integruotas lyno keltuvas UKW radijas 3 perjungiamos kameros su monitoriumi Skaitmeninė svėrimo sistema Pfreundt WK33 Valdymas joystick’u Komforto sėdynė Puikus panoraminis matomumas

Būklė: naudotas, Gamybos metai: 2026, Frezų ir drožlių siurblys FM230-L1 Masinė ištraukimo konstrukcija ir didelis vakuumas leidžia efektyviai šalinti drožles, pjuvenas iš staklių bei siurbti grindis po darbo pabaigos. Mašinos aprašymas Vakuuminis drožlių siurblys su horizontaliai sumontuotu sparnuotės rotoriu Metalinis subalansuotas rotorius Sustiprintas variklis Gali būti naudojamas cechų grindų siurbimui Didelės talpos maišai Komplekte plati siurbimo galvutė grindų valymui Didesnėms ratukams – lengvas transportavimas Ergonomiška rankena lengvam valdymui Didelis našumas ir tylus veikimas! Kompaktiškas dydis – užima mažai vietos dirbtuvėse Daugelio metų mūsų komandos pastangos leido sukurti daugiamentinį metalinį WhirlWind serijos rotorių, kuris kartu su masyviu metaliniu korpusu sudaro įrenginio širdį. Siurbiamo oro srautas idealiai pašalina perteklines pjuvenas, susidarančias apdirbant medieną. Masinė konstrukcija sustiprinta stabiliu karkasu, užtikrinančiu vibracijų neturinčią ir stabilią darbo eigą. Visa konstrukcija sustiprinta tinkamo storio atramomis, kurios tvirtai laiko išmetimo cilindrus ir pilnus atliekų maišus ant pagrindinės bazės. Papildomas privalumas – elastinė ir itin patvari tarpinė svarbioje vietoje, pagerinanti visos sistemos sandarumą. Standartiškai komplekte—drobės filtravimo maišas ir plastikinis atliekų maišas. Lankstūs metaliniai spaustukai užtikrina ilgą ir patikimą maišų keitimą. Sukamieji ir guoliuoti ratukai užtikrina patogų siurblio pervežimą dirbtuvėje. Techniniai parametrai Variklio galia (S1 nuolatinis darbas): 0,75 kW Apsisukimų skaičius: 2800 aps./min. Siurbimo našumas: 1000 m³/h Maišų talpa: 60 l Maišų skaičius: 2 Siurbimo angos skersmuo: 100 mm Aukštis: 1550 mm Plotis: 420 mm Ilgis: 800 mm Rsdpfozhtryjx Ahgsw Įtampa: 230 V Svoris: 27 kg PASTABA! Įrenginiai grąžinti po grąžinimo, pilni komplektai, liko 4 vnt. GARANTIJOS NĖRA!

Būklė: labai geros būklės (naudotas), Profesionali DMG Microset ECO 210 pjovimo įrankių nustatymo ir matavimo įranga. Skirta tiksliai matuoti įrankių ilgį, skersmenį bei geometriją prieš montuojant juos į CNC stakles, kas žymiai sutrumpina perrinkimo laiką ir padidina apdirbimo tikslumą. Įrenginys pilnai sukomplektuotas, į komplektą įeina valdymo kompiuteris, monitorius, klaviatūra, pelė bei matavimo adapterių rinkinys, matomas nuotraukose. Techniniai duomenys * Gamintojas: DMG Microset GmbH * Modelis: ECO 210 * Pagaminimo metai: 2008 * Įtampa: 230 V * Maksimali galia: 650 VA * Pagaminimo šalis: Vokietija Įranga * Valdymo kompiuteris * LCD monitorius * Klaviatūra ir pelė * Įrankių ir priedų spintelė * SK50 / HSK63A adapteris Rodpfxjzgcdis Ahgow * SK50 / SK40 adapteris * HSK40 žiedas * DMG Microset kalibravimo etalonas * Microvision III dokumentacija (matoma nuotraukose) Techninė būklė * Naudotas * Veikiantis * Paskutinis aptarnavimas atliktas HAIMER (serviso lipdukas matomas ant įrenginio) * Geros vizualinės būklės, įprasti naudojimo žymės Pritaikymas * CNC apdirbimo centrai * CNC frezavimo staklės * Įrankių gamybos skyriai * Techninės priežiūros skyrius * Gamyklos ir precizinio metalo apdirbimo įmonės Parduodama būtent tai, kas matoma nuotraukose. Įrenginį galima patikrinti prieš perkant, iš anksto susitarus dėl laiko.

Būklė: labai geros būklės (naudotas), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition Rodpev Nrfxsfx Ahgow ///// Price listed per unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight approx. 130 kg SMC Technology - Smart Machine Control A unique step-switch device regulation concept developed by Rehm: Arc length is regulated not only through measurement of voltage and current, but also digitally via wire feed speed setting. This enables exceptional welding results and ensures operation is easy and safe. - SDI – Stepless Dynamic Induction A steplessly adjustable coil automatically ensures excellent arc strike characteristics and high arc stability during welding. Fine adjustment can be made manually using the SDI knob. This enables control over heat input, which can reduce required post-weld finishing work. - RSC – Realtime Speer Control Digital monitoring and regulation of wire feed speed with high precision in real time. Thanks to RSC, fluctuations in arc length are compensated more quickly and effectively. - CCM – Characteristic Curie Memory The device features an integrated welding parameter database, containing expert knowledge. By selecting the wire type, diameter, and welding voltage, pre-set synergic welding parameters are automatically chosen. During welding, actual parameter values are compared with set values and corrected instantly if necessary. - RMI – Rehm Machine Interface The control panel is extremely user-friendly, minimizing the risk of incorrect selection. Simple parameter selection streamlines the welder's work, reduces errors, and minimizes device setup time.