Šviesolaidinis lazeris

KK Kletzer Laser Fiber FLC-P 1530 12 kW + 220 mm Rohrschneide

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. Kodsl Dw D Eepfx Af Ijdg The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 530 mm, bendras aukštis: 1 940 mm, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 50 mm, galia: 6 kW (8,16 AG), įėjimo srovė: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges on both outer and inner contours of stainless steel, steel, or aluminum parts that have been cut by laser, shear, or punch machines. This machine processes parts of various sizes, including products starting from 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, producing clean, smooth, and burr-free edges across the entire part. DM1100 C Working capacity (mm): 1100x50 Number of cross belt stations: 1 Cross belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Ksdpfx Ajtzfntjf Ijdg Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Exhaust connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guide via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Workspace lighting - Positioning laser diode - Oil spray system - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and installation device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic outlet - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass to prevent lens contamination - Condition inspection of the protective glass - ControlLine: height control and sheet external edge detection Control System - Advanced workshop programming (TruTops via network access) - Quick reproduction - 17" touch color display - Integrated technology data - Automatic shut-off - Programmable cutting gas/pressure selection Kodpoxw Urysfx Af Iedg - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data Transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Rolling roof Special Equipment: • 3001 upgraded to TruDisk 4001 • Extended pallet drawer • Dust protection sheet metal • Viewing window left • Viewing windows right side • Storage interface • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Sąlyga: naujas, Gamybos metai: 2023, lazerio galia: 8 000 W, Fiber laser machine HLF available from stock, ready for prompt delivery. An identical machine is powered up and available for testing at our facility. Specifications: - Power: 8kW - Sheet size: 3000 x 1500mm - Automatic shuttle table with ball rollers for scratch-free workpiece positioning - Siemens touchscreen control with LAN/USB - Siemens drives - Precitec autofocus Procutter cutting head - Sheet metal measurement - IPG resonator with 8kW / alternatively MAX Photonics - Small parts conveyor belt Includes: - Warranty - CAD / CAM software - Commissioning - Delivery (within Germany) Kedpfx Afjqgcwte Isdg - Donaldson extraction unit - Training offered This is a stock machine and therefore available at short notice. We have 300+ similar and identical machines powered up across Germany and Europe. Reference visits to existing users are always possible. Call us today!

Sąlyga: labai geros būklės (naudotas), Gamintojas: LVD Modelis: Electra FL3015 Serijos numeris: 36445 Kilmės šalis: Belgija Pagaminimo metai: 2016 Techniniai parametrai: Lazerių tipas: Šviesolaidinis lazeris Šaltinio galia: 3 kW Darbinis plotas: 3000 mm × 1500 mm Lazerio šaltinis: Rofin FL030 šviesolaidinis lazerio šaltinis Šaltinio serijos numeris: 987 Šaltinio pagaminimo metai: 2015 Kjdpfxjxvawle Af Iedg Papildoma įranga: Thermotec Chiller Unit – aušinimo agregatas lazerio šaltinio temperatūros stabilizavimui Donaldson Torit DCE DFPro-4SPK – dūmų ištraukimo ir filtravimo sistema Infeed/Outfeed Shuttle Table – automatinis pakrovimo/iškrovimo stalas Light Guards – šviesos apsaugos sistema.