Seca Širdies Monitorius pirkti naudotą (2 815)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Bremerhaven
1 008 km
Balu presas
ANISATS 110-75S-9CT-30kW
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, For sale is an ANIS ATS 110-75S-9CT-30kW baler including cross-wiring (9-fold binding).
The baler is in good technical condition and was only used sporadically.
DIMENSIONS OF THE BALER
-Total length: 9700 mm
-Total width: 3700 mm
-Transport width: 2300 mm
-Height including feed hopper: 3640 mm
-Total weight approx.: 24 t
-Floor load approx. 5 kg/cm²
-Heaviest part of the machine weighs approx. 6 tons
FEED HOPPER OPENING
-Length: 1600 mm
-Width: 1200 mm
-Inspection door (glass)
PRESS CHAMBER
-Stroke length of the ram: 2600 mm
-W x H: 1100 x 770 mm
-Volume: 2.2 m³
-The ram runs on heavy-duty rollers and is equipped with knives for cutting off residual material.
-The pressure on the press chamber (channel) is provided by two side-mounted cylinders and a simple lever system, allowing for an even and uniform force distribution.
HYDRAULIC EQUIPMENT
-Siemens electric motor 4-pole 400V-50Hz 30 kW
-Hydraulic pump (Bucher) Const./Peak 320 / 400 bar
-Max. working pressure: 290 bar
-Denison hydraulic valves 24 VDC
-Pressure control with proportional valve cycle
-Automatic oil temperature monitoring
-Automatic oil filter monitoring
-Automatic oil level monitoring
-Oil quantity: 600 L
-Pressing force max.: 740 kN / 74 t
-Specific pressure: 87 N/cm²
SYSTEM THROUGHPUT
-Volume per cycle including pre-compaction: 1.76 m³
Ppedpfxoy Ayiqe Ahgeu
-Average duration per press cycle approx. 40+8 sec.
-Duration per press cycle without material 22+8 sec.
-Tying time 30 sec.
-Theoretical volume without tying 1.84 m³/h
-Average operating volume 123 m³/h
-Capacity at material density 30 kg/m³: 3-4 t/h
BALES
-Bale length: 500 - 2000 mm
-Bale width: 1100 mm
-Bale height: 770 mm
Mažas skelbimas
Gelsenkirchen
1 179 km
Servopresas
DurendusVulkanisierpresse
Skambinti
Būklė: naujas, spaudimo jėga: 280 t, 280 t Servo Double-Column Heating Press with Heated Platens
Pjdpfx Ahsyynalsgepu
We can offer you this press at a particularly attractive price, as the machine is already in production and the original customer has withdrawn from the contract for two identical machines. This provides an opportunity to purchase a high-quality servo-hydraulic double-column press with heated platens under excellent conditions and with a comparatively short lead time. The photos shown feature similar machines already built at the factory and are for reference purposes.
Technical Data & Information:
==== General Specifications
Pressing force: 280 t
Design: Servo double-column heated press
Main cylinder: 1
Auxiliary cylinders: 2
Guidance: 4-column guides
Clear opening between uprights: 1,250 mm
Cylinder stroke: 600 mm
Max. distance between heated platens: 800 mm
Table height from floor incl. vibration dampers and heated platen: 900 mm
Overall height approx.: 3,500 mm
Width approx. with control cabinet: 2,200 mm
Depth approx.: 1,200 mm
Weight approx.: 13,000 kg
==== Table & Ram
Lower fixed table with T-slots: 1,250 × 800 mm
Ram with T-slots: 700 × 800 mm
Heated platen: 600 × 600 × 80 mm
==== Speeds
Approach speed: 100 mm/sec
Working speed: 10 mm/sec
Return speed: 100 mm/sec
==== Hydraulics & Drive/Electrics
Hydraulic unit: Duplomatic
Hydraulic pump: Rexroth / Baumüller / Servo
Pump capacity: 72 l/min
Motor power: 10 kW
Servo hydraulics: included
Control system: Siemens S7-1200 with Siemens MTP 1000 touchscreen display
Programming: up to 50 programs
Travel measurement: Encoder
Pressure measurement: Data acquisition
==== Equipment
Digital control for stroke, pressure, speed, and switching positions
Passive pressure constancy up to 15 minutes
Heated platens electrically heated up to 250°C
Heating output: 24 kW
Temperature monitoring and heating element control via monitor
Piece counter
Alarm management
Downstroke accuracy: 0.1 mm
Travel limit via Leuze measuring bar and monitor
Two-hand operation
Ram return via operator button
Photoelectric safety guards front and rear up to 2,500 mm height
CE certificate and user manual included
Control cabinet equipped with Siemens components
Safety technology by Sick / Pilz / Keyence / Datalogic
==== Additional Included Equipment
40 mm thick base plate with chamfered ramp
4 vibration damping plates
Energy-saving servo hydraulics
Applications:
Heated presses, compression molding presses, presses with temperature-controlled process, plastics processing, composite materials, technical molded parts, laminating processes, industrial special applications
Hydraulic press, servo-hydraulic press, servo press, double-column press, heating press, servo double-column press, compression molding press, press with heated platens, industrial machine, special-purpose machine, tool matching press, tryout press, tool tryout press.
Mažas skelbimas
Gelsenkirchen
1 179 km
Stumdomo stalo presas
HidrobrasilViersäulenpresse
Skambinti
Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0362, spaudimo jėga: 250 t, Hidrobrasil Four-Column Hydraulic Press – 250 t – 1,800 × 1,600 mm – Sliding Table
Ppsdpfsfxyinsx Ahgju
For sale is a four-column hydraulic press from the manufacturer Hidrobrasil with a press force of 250 t and an integrated sliding table. This machine is ideal for assembly, forming, and series production processes where convenient workpiece access and precise parallelism are required. With comprehensive features such as oil cooling, energy-saving function, and optional safety technology, it is designed for continuous industrial operation.
====
Technical Data & Information:
Hydraulic Four-Column Press – 250 t
==== General Information
- Manufacturer: Hidrobrasil
- Model: Four-Column Press
- Machine designation: Sliding Table Press
- Design: Four-Column Press
- Press force: 250 t
- Machine weight: approx. 24 t
- Total power requirement: 22 kW
- Dimensions (L × W × H): approx. 3,390 × 3,400 × 3,800 mm
- Column diameter: 160 mm
==== Working Area
- Passage width: 1,800 mm
- Max. working height: 800 mm
- Stroke: 600 mm
==== Table & Ram
- Table size: 1,800 × 1,600 mm
- Ram size: 2,350 × 1,600 mm
- Table height above floor: approx. 900 mm
- Max. table load: 5 t
- Hydraulic table travel: 25 mm/sec
- Return force: 25 t
==== Speeds
- Approach speed: 10 mm/sec
- Pressing speed: 10 mm/sec
- Return speed: 25 mm/sec
- Rapid traverse: 10 mm/sec
==== Hydraulics & Equipment
- Oil tank: 600 l
- Recommended oil: ISO VG 46 / 10 µ
- Electric oil cooler: 1.5 kW (max)
- Separate cooling circuit with automatic activation
- Permanent filtration circuit (approx. 1.5 kW power consumption)
- Main pump energy-saving function
==== Control & Safety
- Monitor: Siemens, 10 inch
- Safety options: SICK / Pilz / Schmersal
- Parallelism monitoring via position measurement systems (Balluff / SICK)
- Control cabinet with approx. 40% reserve capacity
==== Construction & Additional Features
- Vibration damping plates (4 × 450 × 450 × 85 mm)
- Galvanized or electroplated connection elements
- Oil drip tray for maintenance work
- Noise emission: max. 67 dB
==== Accessories
- 2 roll-on loading bridges (each 1,500 mm, removable)
=====
Assembly, forming, series production, sliding table applications, metalworking
Hydraulic press, four-column press, sliding table press, production press, industrial press, forming press
Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German machine guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety regulation NR 12, which is based on these standards. Our core strength is special purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
Stumdomo stalo presas
HidrobrasilDoppelständerpresse
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, spaudimo jėga: 400 t, Hidrobrasil Double Column Press – 400 t – 1,500 × 1,500 mm – Sliding Table Press with Ejector
For sale is a hydraulic double column press with sliding table from Hidrobrasil, offering a press force of 400 t. The machine is designed for demanding forming and pressing processes and provides high flexibility in tooling thanks to its movable table and integrated ejector. With modern controls, high precision, and extensive safety features, it is ideally suited for industrial series production and complex applications.
====
Technical Data & Information:
Hydraulic Double Column Press – Sliding Table Press – 400 t
==== General Data
- Manufacturer: Hidrobrasil
- Model: Double Column Press
- Machine Type: Sliding Table Press
- Design: Double Column Press
- Press Force: 400 t (4,000 kN)
- Machine Weight: approx. 28 t
- Dimensions (L × W): approx. 3,800 × 4,475 mm
- Overall Height: approx. 4,300 mm
- Number of Operator Sides: 1
==== Working Area
- Max. Opening Width: 800 mm
- Stroke: 800 mm
- Table Height above Floor: 1,100 mm
- Minimum Hall Height: 5,500 mm
- Parallel Deviation: ± 0.1 mm
==== Table & Ram
- Table Size: 1,500 × 1,500 mm
- Ram Size: approx. 1,600 × 1,500 mm
Ppsdsph Uk Nepfx Ahgsu
- Table Plate: Finish milled with T-slots (DIN 650-22)
- Ejector in Table: 20 t / 350 mm stroke
- Ejector moves out together with the table
==== Speeds
- Closing Speed: up to 100 mm/sec
- Opening Speed: up to 100 mm/sec
- Pressing Speed: 3–10 mm/sec
==== Hydraulics & Power
- Operating Pressure: max. 300 bar
- Main Pump: Bosch Rexroth Axial Piston Pump (approx. 145 l/min)
- Auxiliary Pump: Bosch Rexroth Gear Pump (10 l/min)
- Pressure Holding: up to 300 sec
- Main Motor: 40 kW
- Oil Volume: approx. 1,000 l
- Oil Temperature Monitoring: Warning at 55 °C, shutdown at 60 °C
==== Control & Operation
- Control System: Siemens S7-1200
- Touchscreen: 9" monitor
- Remote Maintenance: SECOMEA Ethernet
- Operating Modes: Setup, Single Stroke, Automatic/Cycle
- Pressure Setting: 60–400 t via touchscreen
- Travel limitation by pressure or position
- Free positioning of the ram
- Swiveling control panel
- Two-hand operation with function switching
==== Safety & Equipment
- Light Curtains: SICK / PILZ (14 mm, up to 1,800 mm height)
- Hydraulic and mechanical ram locking
- Automatic lubrication
- Circulating oil cooling
- Side doors with viewing windows (1,000 × 800 mm)
==== Construction & Features
- Precise deflection: ≤ 0.2 mm/m
- Robust design for continuous operation
- Suitable for demanding forming and series production processes
=====
Forming, Series Production, Toolmaking, Pressing Work, Sheet Metal Processing
Hydraulic Press, Double Column Press, Sliding Table Press, Industrial Press, Forming Press
Are you looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our core strength is special purpose machinery and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
Miltelių presas
HidrobrasilViersäulenpresse
Skambinti
Būklė: naujas, spaudimo jėga: 100 t, Hidrobrasil Four-Column Hydraulic Press – 100 t – 1,090 × 600 mm – Powder Press with Ejector
For sale is a hydraulic four-column press (powder press) manufactured by Hidrobrasil, offering a pressing force of 100 t. This machine is specifically designed for powder pressing and compaction processes, featuring high positional accuracy and a powerful ejector system. Its precise control and robust construction make it ideal for industrial serial production of molded parts.
=====
Technical Data & Information:
Hydraulic Four-Column Press – Powder Press – 100 t
==== General Information
- Manufacturer: Hidrobrasil
- Model: Four-Column Press
Pedpfxofxyhqo Ahgopu
- Machine Type: Powder Press
- Design: Four-column press
- Pressing force: 100 t
- Machine weight: approx. 6 t
- Dimensions (L × W × H): approx. 3,000 × 1,210 × 3,100 mm
- Motor power: 22 kW
==== Working Area
- Pass-through width: 700 mm
- Stroke: 450 mm
- Max. working height: 850 mm
- Table height above floor: approx. 800 mm
- Positioning accuracy: 0.1 mm
==== Table & Ram
- Table plate: 1,090 × 600 mm
- Ram plate: 1,090 × 600 mm
- Retraction force: 10 t
==== Speeds
- Advance speed: 1–100 mm/sec
- Return speed: 1–100 mm/sec
- Working speed: 1–10 mm/sec
==== Ejector System
- Ejector diameter: 100 mm
- Ejector stroke: 210 mm
- Ejector force: 100 t
- Number of ejector pins: 1 piece
==== Hydraulics & Performance
- Oil tank: 300 l
- Oil cooling (electric): 1.5 kW (max)
==== Control & Operation
- Monitor: WEG 15"
- Precision control for repeatable press cycles
==== Options (on request)
- Hydraulic unit and tank mounted on top of the press
- All-round maintenance balcony
- Siemens S7-1500 control unit
- Oil catch pan
- Heating circuit connections (3 units) with monitoring and timer settings
=====
Powder presses, compaction, series production, sintering technology, molded part manufacturing
Hydraulic press, hydraulic powder press, four-column press, industrial press, production press
Are you looking for a hydraulic press tailored to your application? Contact us for a bespoke quotation. Our hydraulic presses are manufactured in accordance with German Machine Guidelines and European Machinery Directive (Directive 2006/42/EC), as well as EC norms and EU safety standards. Furthermore, our presses exceed Canadian and European safety requirements, since they fully comply with the national Brazilian safety directive NR 12, which builds upon these standards. Our core strengths are special-purpose machine building and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. The hydraulic systems predominantly feature components from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
šildymo presas
HidrobrasilVulkanisierpresse
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, spaudimo jėga: 120 t, stalo ilgis: 600 mm, stalo plotis: 600 mm, Vulcanizing Press – Manufacturer Hidrobrasil – 120 t Heating Press
For sale is a hydraulic vulcanizing press from Hidrobrasil featuring a maximum pressing force of 120 t. This machine is equipped with heating plates sized 600 × 600 mm, flexible pressure adjustment, and comprehensive control and safety features. It is especially suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing.
====
Technical Data & Information:
Vulcanizing Press Hidrobrasil – Heating Press
Psdpfjk S Dt Tex Ahgepu
==== General Information
- Manufacturer: Hidrobrasil
- Model: Vulcanizing Press
- Type: Heating Press / Vulcanizing Press
- Pressing force: 120 t (max. 1,600 kN)
- Pressure range: 30 – 120 t
- Machine weight: approx. 9 t
- Dimensions (L × W × H): approx. 2,000 × 1,000 × 2,800 mm
- Table height above floor: 850 mm
- Minimum hall height: 3,500 mm
==== Working Area
- Stroke: 400 mm
- Opening height per section: 200 mm
- Minimum opening: 200 mm
==== Table and Ram
- Table size: 600 × 600 mm
- Ram size: 600 × 600 mm
- Heating plates: 600 × 600 mm (optional)
==== Forces
- Free stripping force: max. 200 kN
==== Speeds
- Idling speed: up to 40 mm/s
- Opening speed: up to 40 mm/s
- Pressing speed: 5 – 15 mm/s
==== Hydraulics
- Operating pressure: max. 240 bar
- Pressure build-up time: approx. 4 sec.
- Pressure build-up time (steel on steel): max. 8 sec.
- Pressure accuracy: ± 5 bar
- Pressure holding valve: up to 1,800 sec.
- Automatic pressure readjustment
- Oil volume: approx. 300 l (HLP 46)
- Main pump: Bosch Rexroth gear pump approx. 48 l/min
- Max. oil temperature: 55 °C
- Max. ambient temperature: 40 °C
==== Cooling and Lubrication
- Circulating oil cooling
- Oil temperature monitoring
- Automatic lubrication
==== Heating System
- Electrically heated plates up to 250 °C (optional)
- Thermally neutral: 80 – 120 °C
==== Control and Operation
- Control panel integrated into switch cabinet
- Two-hand operation
- Programmable setup mode
- Single stroke adjustable
- Free positioning of the ram
- Stroke limitation via pressure or position
- Signal tower (Red/Yellow/Green)
==== Safety
- Light barriers (SICK / Leuze, 14.1 mm, front)
- Monitored rear door
- Machine frame double coated
==== Electrical
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Hydraulic motor connection: 15 kW
- Total connected load: approx. 19 kW (without heating plates)
=====
Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing, hot pressing
Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermal press, tryout press, tool tryout press
Mažas skelbimas
Gelsenkirchen
1 179 km
Stumdomo stalo presas
ME-PressenPortal-Richtpresse
Skambinti
Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm
For sale is a hydraulic portal straightening press manufactured by ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and features an integrated tool clamping device as well as a parallel guide for bending dies. Thanks to its traversable table, movable cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production.
====
Technical Data & Information:
Hydraulic Portal Straightening Press – 500 t
==== General Information
- Manufacturer: ME-Pressen
- Model: Portal Straightening Press
- Type: Portal press
- Machine designation: Sliding table press / straightening press
- Pressing force: 500 t (5,000 kN)
- Machine weight: approx. 25 t
- Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm
- Number of operator sides: 3
==== Working Area
- Max. opening width: 1,500 mm
- Stroke: 1,300 mm
- Min. opening: 200 mm
- Table height above floor: approx. 850 mm
- Open height: 1,500 mm
==== Table & Movement
- Table size: 2,000 × 850 mm
- Table hydraulically traversable: 700 mm outward
- Table with grid construction
- Cylinder horizontally traversable via rack and pinion
==== Speeds
- Closing speed: up to 17 mm/s
- Opening speed: up to 44 mm/s
- Pressing speed: dependent on load
==== Hydraulics & Performance
- Pressure adjustment: 80–500 t via rotary control
- Pressure build-up time: max. 3 sec.
- Free tear-off force: max. 800 kN
- Oil temperature monitoring included
- Lubrication via grease nipples
==== Construction & Equipment
- Integrated tool clamping device
- Parallel guide for bending die
- Induction-hardened cylinder
- Machine body powder-coated / double-lacquered
- T-slots as per customer specifications
==== Operation & Safety
- Remote control
- Robust construction for industrial applications
Pjdpfx Ahswgakvjgspu
==== Precision
- Deflection: ≤ 1.2 mm/m (at 70% load)
=====
Straightening operations, bending processes, toolmaking, series production, heavy-duty forming
Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press
Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machine guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the national Brazilian safety regulation NR 12, which is based on these standards. Our key strengths are special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
Servopresas
DurendusVulkanisierpresse
Skambinti
Būklė: naujas, spaudimo jėga: 1 100 t, 1100 t Servo Double-Column Heating Press with Heated Platens
We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has withdrawn their order for two identical machines. This provides you with the opportunity to purchase a high-quality servo-hydraulic double-column press with heated platens at favorable conditions and with comparatively short lead times. The photos shown depict similar machines already built at the factory and serve as sample images.
Technical Data & Information:
==== General Information
Press force: 1,100 t
Design: Servo Double-Column Heating Press
Cylinder: 1
Auxiliary cylinders: 2
Guidance: 4 column guides (Ø 150 mm)
Clear distance between columns: 1,600 mm
Cylinder stroke: 600 mm
Max. distance between heated platens: 800 mm
Table height from floor incl. damping plate and heated platen: 1,000 mm
Overall height approx.: 4,600 mm
Width approx. with switch cabinet: 3,250 mm
Depth approx.: 1,700 mm
Weight approx.: 41,000 kg
==== Table & Ram
Lower fixed table with T-slots: 1,600 × 1,100 mm
Ram with T-slots: 1,500 × 1,100 mm
Heated platen: 1,100 × 1,100 × 140 mm
==== Speeds
Approach speed: 100 mm/sec
Working speed: 10 mm/sec
Return speed: 100 mm/sec
==== Hydraulics & Drive/Electrics
Hydraulic unit: Duplomatic
Hydraulic pump: Bosch Rexroth / Baumüller / Servo
Pump capacity: 240 l/min
Motor output: 32 kW
Servo hydraulics: included
Control: Siemens S7-1200 with Siemens Touchscreen Display MTP 1000
Programming: up to 50 programs
Position measurement: Encoder
Pressure measurement: Data acquisition
==== Equipment
Digital control for stroke, pressure, speed, and switchover positions
Passive pressure hold for up to 15 minutes
Electrically heated platens up to 250 °C
Heating power: 60 kW
Temperature monitoring and heating element control via monitor
Piece counter
Ppjdpfx Ajyyna Sjhgeu
Alarm management
Downwards accuracy: 0.1 mm
Stroke limitation via Leuze measuring rod and monitor
Two-hand operation
Ram return via control button
Front and rear light curtain protection up to 1,900 mm height
CE certificate and user manual included
Switch cabinet with Siemens components
Safety technology from Sick / Pilz / Keyence / Datalogic
==== Additional included equipment
40 mm thick base plate with chamfered ramp
4 vibration damping plates
Energy-saving servo hydraulics
Applications:
Heating presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical moulded parts, laminating processes, industrial large-scale production, special purpose machinery
Hydraulic press, servo-hydraulic press, servo press, double-column press, heating press, servo double-column press, compression moulding press, press with heated platens, industrial machine, special purpose machine, tool matching press, tryout press, tool try out press
Mažas skelbimas
Gelsenkirchen
1 179 km
Giluminio traukimo presas
HIDRALMACViersäulenpresse
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, spaudimo jėga: 400 t, HIDRALMAC Four-Column Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Cushion
For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming processes, featuring a high-performance drawing cushion as well as state-of-the-art control and safety systems. Thanks to its robust construction and extensive equipment, it is ideally suited for industrial series production and complex forming tasks.
====
Technical Data & Information:
Hydraulic Four-Column Press – Deep Drawing Press – 400 t
==== General Information
- Manufacturer: HIDRALMAC
- Model: Four-Column Press
- Machine designation: Deep Drawing Press
- Design: Four-Column Press
- Pressing force: 50–400 t (adjustable)
- Machine weight: approx. 27.5 t
- Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm
- Main cylinders: 2 units
==== Working Area
- Clearance width: 2,500 mm
- Installation height: 1,300 mm
- Stroke: 900 mm
- Table height above floor: approx. 900 mm
Pedpein Et Nsfx Ahgspu
==== Table & Ram
- Table size: 2,500 × 1,600 mm
- Ram size: 3,100 × 1,600 mm
- Column diameter: 220 mm
- Return force: 40 t
- T-slots: DIN 650-22 (custom configurations possible)
==== Speeds
- Approach speed: 200 mm/sec
- Return speed: 200 mm/sec
- Working speed: 5–15 mm/sec
==== Drawing Unit
- Drawing cushion: 1,400 × 800 mm
- Drawing cushion force: 30–60 t
- Drawing cushion stroke: 250 mm
- Drawing cushion speed: 5–80 mm/sec
==== Hydraulics & Power
- Total power requirement: 62 kW
- Oil tank: 1,500 l
- Oil capacity: 1,200 l
- Hydraulic components: Bosch Rexroth
- Pressure buildup: up to 400 t within max. 4 seconds
- Pressure control: adjustable via monitor
==== Control & Operation
- Control: Siemens
- Monitor: Siemens 12"
- Operating modes: manual, semi-automatic, fully automatic
- Travel distance control adjustable via monitor
- Remote maintenance (remote access)
- Two-hand operation on movable stand
- Electrical control cabinet for wall mounting
==== Safety & Equipment
- Safety PLC for hydraulic block monitoring
- Front and rear light sensors: SICK (1,300 mm)
- Side guards left and right (each 1,000 × 800 mm)
- Interior LED lighting
- Energy control system (idle consumption reduced to approx. 2 kW)
==== Construction
- Robust welded construction
- ASTM A36 structural steel
- Induction-hardened and chrome-plated piston rods
- Low-maintenance and reliable
- CE certificate
- Documentation in German
=====
Deep drawing, forming technology, series production, sheet metal forming, tool making
Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press
Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our key strength lies in special purpose machinery construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
Formavimo presas
HidralmacViersäulenpresse
Skambinti
Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 4303, spaudimo jėga: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm
For sale is a four-column hydraulic press manufactured by Hidralmac, offering a press force of 500 t. This machine is engineered for demanding forming processes in continuous industrial operation and, thanks to its multi-cylinder technology, high dynamics, as well as extensive control and monitoring features, provides a precise and high-performance solution for complex applications.
====
Technical Specifications + Information:
Hydraulic Four-Column Press – 500 t
==== General Information
- Manufacturer: Hidralmac
- Model: Four-Column Press
- Design: Hydraulic Column Press
- Machine Type: Forming Press
- Press Force: 500 t (max. 550 t with reserve)
- Machine Weight: approx. 39 t
- Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm
==== Working Area
- Clearance (W × D): 2,100 × 1,500 mm
- Installation Height: 1,500 mm
- Stroke: 1,000 mm
- Table Height above Floor: approx. 850 mm
==== Table & Ram
- Table Size: 2,100 × 1,500 mm (with T-slots)
- Ram Size: 2,100 × 1,500 mm
- Overall Table Plate Size: approx. 2,750 × 1,600 mm
- Overall Ram Plate Size: approx. 2,750 × 1,600 mm
==== Speeds
- Approach Speed: 300 mm/s
- Return Speed: 300 mm/s
- Pressing Speed:
- 200 t: 28 mm/s
- 300 t: 20 mm/s
- 500 t: 6 mm/s
==== Hydraulics & Drive
- Total Power Requirement: 62 kW
- Return Force: 40 t
- Main Cylinders: 2 units
- Auxiliary Cylinders: 2 units
- Axial Piston Pump: Bosch Rexroth A4VSO125 (ca. 290 l/min)
- Hydraulic Block: Rexroth
- Oil Tank Capacity: approx. 2,000 l
- Pressure Regulation via PLC (min. 50 t)
- Pressure Holding Time: 0–900 sec
- Energy-saving via automatic pump shut-off when tool closed
==== Ejectors & Additional Systems
- Ejector: 4 × 15 t at 250 bar
- Ejector Stroke: 300 mm (PLC-adjustable)
- Ejector Speed:
- Forward: 95 mm/s
- Return: 240 mm/s
==== Control & Electrical
- Control: Siemens S7-300
- Monitor control with pressure and stroke programming
- Storage capacity: up to 200 programs
- Electronics: Siemens / Möller
- Control panel on swivel arm
- Voltage: 400 V / 50 Hz
- Control voltage: 24 V
==== Safety & Monitoring
- Light sensors by SICK (1,500 mm, front)
- Monitoring of hydraulics, pumps, and temperature
- Main cylinder synchronisation monitoring with automatic adjustment
- Pressure monitoring with automatic return or hold function (± 5%)
==== Construction & Equipment
- Main Cylinder Column Diameter: 360 mm
- Auxiliary Cylinder Column Diameter: 120 mm
- Material: ASTM A36, manufactured according to DIN 8651
Ppodjdyynvopfx Ahgsu
- Polycarbonate safety glazing (8 mm) in working area and doors
- Liquid channel around the table (25 mm radius)
==== Additional System
- Nitrogen compression unit (up to 280 bar, switchable)
=====
Forming technology, heavy forming, series production, large part machining, industrial manufacturing
Hydraulic press, four-column press, column press, forming press, industrial press, production press.
Mažas skelbimas
Gelsenkirchen
1 179 km
Gamybos presas
HidrobrasilViersäulenpresse
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, spaudimo jėga: 400 t, Hidrobrasil Four-Column Hydraulic Press – 400 t – 2,700 × 1,700 mm – Stroke 1,000 mm
For sale is a Hidrobrasil four-column hydraulic press with a pressing force of 400 t. This machine is engineered for continuous shift operation and, thanks to its powerful dual-cylinder design with piston accumulator, offers outstanding dynamics with efficient energy use. With extensive automation and adjustment options, this press is ideally suited for demanding production and forming processes.
=====
Technical Data & Information:
Hydraulic Four-Column Press – 400 t
==== General Information
- Manufacturer: Hidrobrasil
- Model: Four-Column Press
- Design: Hydraulic Column Press
- Machine Type: Production Press
- Pressing Force: 400 t (4,000 kN)
- Machine Weight: approx. 52 t
- Overall Height: approx. 5,700 mm
- Number of Operating Sides: 2
==== Working Area
- Max. Opening Width: 1,600 mm
- Stroke: 1,000 mm
- Min. Opening: 600 mm
- Table Height above Floor: 820 mm
- Minimum Tool Height: 600 mm
==== Table & Ram
- Table Size (Clamping Area): 2,700 × 1,700 mm
- Total Table Size: 3,400 × 1,700 mm
- Ram Size: 3,400 × 1,700 mm
- Column Diameter: 250 mm
- T-Slots: 28 mm, configured per customer requirements
- Table Plate face-milled
==== Speeds
- Closing Speed: 100–450 mm/s
- Opening Speed: 50–250 mm/s
- Pressing Speed: 5–60 mm/s
==== Hydraulics & Drive
- Hydraulic components: Bosch Rexroth / Parker / HAWE
- Main Motor Power: 90 kW
- Piston accumulator with approx. 4 nitrogen cylinders
- Recirculating oil cooling (adjustable)
- Pressure-holding valve: 0–600 sec
- Pressure build-up time: max. 2 sec
- Pressure accuracy: ± 5 bar
==== Control & Operation
- Control System: Siemens S7-1500
- Touchscreen: 15" Siemens
- Control Console: swivelling
- Modes: Setup, Single Stroke, Continuous Stroke, Program Mode
- Pressure setting: 50–400 t via touchscreen
- Stroke limitation via pressure or position
- Freely positionable ram
- Siemens remote maintenance unit (SECOMEA Ethernet)
==== Equipment
- Automatic lubrication (adjustable)
- Oil temperature monitoring (adjustable)
- KEYENCE light curtains (14 mm) at front and rear
- Safety components from SICK
- Side-monitored safety doors (1,200 × 1,000 mm)
- Two-hand controls on both sides
Ppodpsg Iihwofx Ahgsu
- Prepared for automated material feed
- RITTAL control cabinet (can be placed up to 20 m away)
- Components (table, ram, press head) stress-relieved and annealed
- Machine frame primed and painted
==== Accuracy
- Parallel deviation: ± 0.1 mm
- Deflection: ≤ 0.17 mm/m
=====
Forming technology, Deep drawing, Pressing processes, Series production, Large part manufacturing, Automated manufacturing
Hydraulic press, hydraulic press, four-column press, column press, production press, industrial press, forming press
Looking for a hydraulic press custom-tailored to your application? Contact us for an individual quote. Our hydraulic presses are built in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety standards, as they comply with all aspects of the Brazilian national safety regulation NR 12, which is based on these standards.
Mažas skelbimas
Gelsenkirchen
1 179 km
šildymo presas
HidrobrasilVulkanisierpresse
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, bendras aukštis: 2 500 mm, stalo aukštis: 900 mm, presavimo greitis: 8 mm/s, spaudimo jėga: 50 t, bendras svoris: 2 900 kg, darbinis slėgis: 250 juosta, stūmoklio plokštės plotis: 498 mm, stalo ilgis: 522 mm, stalo plotis: 522 mm, įvesties srovės tipas: Oro kondicionierius, galia: 10 kW (13,60 AG), įėjimo įtampa: 400 V, atstumo lentelė iki stūmoklio: 600 mm, alyvos bako talpa: 130 l, darbinis greitis: 8 mm/s, Įranga: apsaugos šviesos užtvara, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double-Column Heated Press
For sale is a hydraulic vulcanizing press from Hidrobrasil featuring a pressing force of 50 t and a robust double-column design. The machine is equipped with electrically heated platens measuring approx. 522 × 522 mm, a maximum opening width of 600 mm, and precisely adjustable pressing and heating parameters, making it ideal for continuous industrial processes such as vulcanization, laminating, and thermal pressing.
=====
Technical Data & Information:
Vulcanizing Press Hidrobrasil – 50 t Heated Press
==== General Information
- Manufacturer: Hidrobrasil
- Model: Vulcanizing Press
- Design: Double-column heated press
- Pressing force: 50 t (500 kN)
- Machine weight: approx. 2.9 t
- Total height: approx. 2,500 mm
- Minimum hall height: 3,500 mm
==== Working Area
- Max. opening width: 600 mm
- Stroke / min. opening: 300 / 300 mm
- Table height above floor (with platens): 900 mm
==== Table and Ram
- Table size / heating plates: approx. 522 × 522 mm
- Ram size / heating plates: approx. 498 × 498 mm
- Number of heating levels: 1
==== Forces
- Free stripping force: 20 kN
- Pressure range: 8 – 50 t
==== Speeds
- Idle speed: up to 10 mm/s
- Opening speed: up to 40 mm/s
- Pressing speed: max. 8 mm/s
==== Hydraulics
- Operating pressure: max. 250 bar
- Pressure build-up time: max. 3 sec.
- Pressure accuracy: ± 5 bar
- Main pump: Bosch Rexroth gear pump, approx. 26 l/min
- Oil volume: approx. 130 l (HLP 46)
- Automatic pressure readjustment
- Pressure holding up to 3,600 sec.
- Oil circuit cooling
- Oil temperature monitoring
==== Heating System
- 2 electrically heated platens
- Temperature range up to 200 °C
- Thermally neutral: 80 – 120 °C
- Integrated temperature sensor
- Platens insulated
==== Control and Operation
- Two-hand operation (adjustable or fixed)
- Travel limitation via pressure or position
- Pressure setting via rotary knob
- Signal tower (Red / Yellow / Green)
- Operation via control cabinet
==== Electrical
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Hydraulic motor connection: 7.5 kW
Ppjdpfx Ahstwv S Nsgju
- Total connected load: approx. 10 kW (excluding heating plates)
==== Miscellaneous
- Sound pressure level: max. 78 dB(A)
- Parallelism deviation: ± 0.1 mm
- Deflection: < 0.2 mm/m
=====
Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing processes, hot pressing, continuous operation
Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, compression press, thermo press, double-column press, tryout press, tool try out press
Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer.
Mažas skelbimas
Gelsenkirchen
1 179 km
Giluminio tempimo presas
HidralmacDoppelständerpresse
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0052, spaudimo jėga: 200 t, HIDRALMAC Double-Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press
For sale: A hydraulic double-column press (deep drawing press) manufactured by HIDRALMAC with a pressing force of 200 t. This machine is built for demanding deep drawing and forming operations, offering optimal conditions for industrial series production thanks to advanced control technology, high process speeds, and precise pressure regulation.
====
Technical Data & Information:
Hydraulic Double-Column Press – Deep Drawing Press – 200 t
Ppodsfxyirjpfx Ahgju
==== General Specifications
- Manufacturer: HIDRALMAC
- Model: Double-Column Press
- Machine designation: Deep Drawing Press
- Design: Double-column press
- Pressing force: 200 t
- Machine weight: approx. 20.5 t
- Space requirement (L × W × H): approx. 4,000 × 2,600 × 5,000 mm
- Main cylinder: 1 unit
==== Working Area
- Distance between columns: 1,200 × 1,000 mm
- Installation height: 800 mm
- Working height: 1,100 mm
- Stroke: 600 mm
==== Table & Slide
- Table size: 1,200 × 1,000 mm
- Slide plate: 1,200 × 1,000 mm
- T-slots: according to DIN 650-22 (custom sizes available)
- Return force: 20 t
==== Speeds
- Rapid advance: 170 mm/sec
- Return speed: 150 mm/sec
- Working speed: 15 mm/sec
- Setup mode: 2–10 mm/sec
==== Hydraulics & Power
- Total power requirement: 32.5 kW
- Axial piston pump: Bosch Rexroth
- Hydraulic block: Rexroth
- Oil requirement: approx. 500 l
- Oil cooling: electric
- Pressure regulation: via PLC (from 20 t)
- Pressure holding time: 0–10 sec
==== Control & Operation
- Control system: PLC
- Voltage: 400 V / 50 Hz
- Control voltage: 24 V
- Pressure adjustment: 20–200 t via monitor
- Program storage: up to 200 programs
- Operation: movable two-hand control
- Cabinet socket: 220 V
==== Applications & Features
- Precise control for deep drawing operations
- High repeat accuracy
- Suitable for series production and toolmaking
=====
Deep drawing, forming, series production, sheet metal working, toolmaking
Hydraulic press, double-column press, deep drawing press, forming press, industrial press
Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also exceed Canadian and European safety requirements, as they comply fully with Brazilian national safety regulations NR 12, which are based on these standards. Our core strengths are in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. Hydraulic components are predominantly sourced from leading European manufacturers.
Mažas skelbimas
Gelsenkirchen
1 179 km
Tempimo presas
HidralmacViersäulenpresse
Skambinti
Būklė: naujas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0152, spaudimo jėga: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion
For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a press force of 80 t. This machine is designed for drawing and forming processes and is equipped with an integrated deep-drawing cushion as well as modern control and safety technology. Thanks to its compact construction and robust components, it is ideally suited for small-batch production, toolmaking, and precise forming operations.
====
Technical Data & Information:
Hydraulic Four-Column Press – Deep Drawing Press – 80 t
==== General Information
- Manufacturer: HIDRALMAC
- Model: Four-Column Press
- Machine Type: Deep Drawing Press
- Design: Four-Column Press
- Press Force: 80 t
- Machine Weight: approx. 5.1 t
- Total Power Requirement: 12 kW
- Operation: Two-hand operation
- Main Cylinder: 1 piece
==== Working Area
- Working Area: 800 × 800 mm
- Table Size: 800 × 800 mm
- Working Height: 800 mm
- Table Height: 800 mm
Ppjdpjfxyh Hofx Ahgou
- Stroke: 500 mm
- Travel Path: 700 mm
==== Table & Ram
- Ram Plate: 2,800 × 1,300 mm
- Column Diameter: 75 mm
==== Speeds
- Approach Speed: 9.8 mm/sec
- Working Speed: 9.8 mm/min
- Return Speed: 18 mm/sec
==== Deep Drawing Unit
- Deep Drawing Cushion Force: 25 t (at 280 bar)
- Deep Drawing Cushion Stroke: 200 mm
- Rod Diameter: 30 mm
- Deep Drawing Cushion Speed: 80 mm/sec
- Deep Drawing Function Motor: 10 kW
==== Hydraulics & Performance
- Main Motor: WEG 15 kW
- Pump: Rexroth / Parker axial piston pump
- Hydraulic Block and Valves: Rexroth / Parker
- Hydraulic Tank: 300 l (oil requirement approx. 250 l)
- Auxiliary Oil Tank: 150 l
- Hydraulic Pressure Control: via PLC (from 10 t)
- Air Cooling with Electric Fan
- Lubrication: manual via grease nipples or cartridges
==== Control & Operation
- Control System: Siemens / Moeller
- Modes of Operation: automatic, semi-automatic, manual (setup mode)
- Control Panel on Swivel Arm
- Movable Two-Hand Operation
- USB Interface for Data Transfer
- Remote Control (Siemens Remote Maintenance)
- Spacer Sensors for Stroke Length Adjustment
- Pressure Hold: 0–10 sec
==== Safety & Equipment
- Light Curtains Front and Rear (Schmersal, 800 mm)
- Additional Diagonal Safety in Lower Section
- Hydraulic System Safety Monitoring
=====
Drawing, Forming, Small Batch Production, Toolmaking, Sheet Metal Processing
Hydraulic press, hydraulic press, deep drawing press, four-column press, deep drawing press, forming press, industrial press
Looking for a hydraulic press tailored to your application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses surpass Canadian and European safety requirements as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these. Our major strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses are primarily equipped with components from leading European manufacturers.
Mažas skelbimas
Ennepetal
1 181 km
Druskos presas
HidralmacMineralsteinpresse
Skambinti
Gamybos metai: 2020, būklė: dilaminuotas dirbtuvėje (naudotas), spaudimo jėga: 400 t, mašinos/transporto priemonės numeris: DF0317, Hidralmac Mineral Lick Press – 400 t – Salt Press – 600 mm Opening – with Conveyor Belt
For sale is a hydraulic mineral lick press from Hidralmac with a pressing force of 400 t. This machine is specifically designed for the production of salt and mineral lick products and features an integrated conveyor belt for efficient material handling. Thanks to its robust construction and stainless steel components in all product-contact areas, the press is ideally suited for continuous industrial operation.
====
Technical Data & Details:
Hydraulic Mineral Lick Press – 400 t
==== General Information
- Manufacturer: Hidralmac
- Model: Mineral Lick Press
- Machine Designation: Salt Press
- Design: Four-column press
- Pressing force: 400 t
- Machine weight: approx. 14 t
- Dimensions (L × W × H): 2,380 × 1,680 × 3,580 mm
- Motor power: 36 kW
==== Working Area
- Opening width: 600 mm
- Max. working height: 750 mm
- Stroke: 400 mm
- Travel: 500 mm
==== Table & Construction
- Column diameter: 230 mm
- Return force: 40 t
- Steel grade: Machine engineering steel LCG ASTM A36 (DIN 8651)
- Product-contact parts: Stainless steel
==== Speeds
- Approach speed: max. 10 mm/sec
- Pressing speed: 10 mm/sec
- Rapid traverse: 25 mm/sec
Ppedpfed E Irhex Ahgsu
==== Hydraulics & Ancillaries
- Oil tank: 600 l
- Oil cooling: 1.5 kW
- Conveyor belt: 6 m length
==== Control System
- Monitor: WEG, 12 inch
=====
Salt block pressing, mineral lick production, pressing processes, industrial manufacturing
Hydraulic press, hydraulic press, mineral lick press, salt press, production press, industrial press, forming press
Looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety standard NR 12, which builds upon these standards. Our core strength is special-purpose machine design and press automation. We supply custom-designed hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.
Mažas skelbimas
Ennepetal
1 181 km
Druskos presas
HidralmacMineralsteinpresse
Skambinti
Gamybos metai: 2020, būklė: beveik kaip naujas (naudotas), spaudimo jėga: 150 t, Hidralmac Salt Press – 150 t – Mineral Block Press – Stainless Steel Contact Surfaces
For sale is a hydraulic mineral block or salt press from the manufacturer Hidralmac with a pressing force of 150 t. This machine is specifically designed for the production of salt and mineral blocks and features stainless steel contact surfaces to ensure hygienic and corrosion-resistant processes. With its robust construction and optional upgrades, it is suitable for continuous industrial operation.
=====
Technical Data & Information:
Hydraulic Salt Press – 150 t
==== General Data
- Manufacturer: Hidralmac
- Model: Mineral Block Press
- Machine Designation: Salt Press
- Design: Hydraulic Production Press
- Pressing Force: 150 t
- Machine Weight: approx. 8.5 t
- Dimensions (L × W × H): 1,200 × 1,800 × 3,100 mm
- Motor Power: 10 kW
- Steel Grade: Structural Steel LCG ASTM A36
==== Work Area
- Max. Working Height: 1,000 mm
- Stroke: 500 mm
- Table Height Above Floor: 1,000 mm
==== Speeds
- Approach Speed: max. 9.9 mm/sec
- Pressing Speed: up to 100 t: 9.9–0 mm/sec
- Return Speed: 25 mm/sec
==== Hydraulics & Technology
- Hydraulic Tank: 500 l
- Oil Requirement: approx. 400 l
- Column Diameter: 230 mm, chrome-plated
- Lubrication: Manual via grease fittings
==== Construction & Features
- All product-contacting components made of stainless steel
- Heavy-duty design for salt and mineral processing
- High resistance to corrosion
- Maintenance-friendly construction
==== Options (on request)
- Surrounding maintenance platform
- Closed side panels (left/right/rear)
- Light curtains at the front (increased speed)
- Speed enhancement
- Siemens S7-1200 control with 12" monitor
- Pilz safety technology
Podpfxodxvfio Ahgjpu
=====
Salt production, mineral block manufacturing, chemical industry, briquetted products, serial production
Hydraulic press, salt press, mineral block press, production press, industrial press, pressing system
Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machine directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is in custom machinery construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. The hydraulics on our presses predominantly use components from leading European manufacturers.
Mažas skelbimas
Pijnacker
1 326 km
Lazerio pjovimo staklės
TrotecSP3000 400 Watt CO2
Skambinti
Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, valdiklių gamintojas: Trotec, paskutinio kapitalinio remonto metai: 2026, Įranga: CE žymėjimas, apsaugos šviesos užtvara, avarinis stabdymas, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, SP3000 400 Watt CO2
• 2,210 x 3,210 mm working area
• Laser pointer
• Gas kit
• InPack Technology™
• 2.5” lens, 5.0" lens
• Software-controlled Z-axis
• Active laser deflector shield
• Air-cooled optics
• Operator console without PC
Ppodpszaq Ikofx Ahgou
• Laser system meets laser safety class 2, equipped with an integrated class 4 laser source
• Travelling exhaust
• Digital table exhaust system
• Sonar Technology™
• Tandem operation
• Standard PC for the Operator Console with mouse, keyboard, and 24" Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed
• Chiller for 400W/380V
• Aluminium slat table SP3000
• Matching exhaust unit for optimal results. 3-phase power supply
Advantages of the Trotec SP 3000
Spacious working area: The 2,210 x 3,310 mm working area of the SP 3000 is designed for large-format sheets. The work area is easily accessible from all four sides. The loading area is 2,500 mm wide and open at the front and rear. The open design allows loading from any side, even during cutting. This maximizes daily productivity.
Ultra-fast cutting with top quality: Even at the highest speed, up to 1 m/sec and 1g acceleration, the SP 3000 delivers superior cut quality. The innovative drive concept and precise linear guides testify to excellent engineering, made in Austria.
Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. This keeps the optics free from contamination during operation, guaranteeing maintenance-free performance and long service life for these high-quality components.
Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is ensured. The class 4 laser system can be used as safely as a class 2 system, with no additional safety measures required.
Reliability through InPack Technology™ and Harsh Environment Protection: At the core of Trotec’s unrivaled mechanical reliability is the completely dustproof and maintenance-free axis system.
Travelling exhaust package: The sophisticated airflow concept, with extraction both above and below the workpiece, guarantees high-quality engraving and unmatched cutting results.
JobControl® software package: Much more than a standard printer driver. JobControl software lets you optimize material usage and customize your workflow.
Service and support: Your direct link to the system manufacturer guarantees the best service and parts availability.
Mažas skelbimas
Babenhausen
1 162 km
Unwinder
RondoRondomat 4000 SSO 6407
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, konvejerio juostos plotis: 640 mm, garantijos trukmė: 24 mėnesiai, bendras plotis: 3 700 mm, bendras ilgis: 1 235 mm, bendras aukštis: 1 200 mm, įėjimo įtampa: 400 V, stalo ilgis: 3 320 mm, tuščias svoris: 240 kg, atidarimo plotis: 45 mm, darbinis plotis: 640 mm, vėjo ilgis: 660 mm, reikalingas aukštis: 2 170 mm, vietos reikalavimas ilgis: 1 235 mm, reikalingas plotis: 2 150 mm, New machine – Rondomat 4000
Successor model to the SWL 6407
Advantages:
- Premium quality from Switzerland with a 2-year warranty
- Robust, mobile base sheeting machine
- Equipped with stainless steel tables and stainless steel base
- Easy to move, with swivel castors and locking feet for stable positioning
- Operation possible via push buttons
- Comes standard with high-quality linen belts
- Suitable for sheeting and laminating all types of dough
- Integrated electric motor
- Tables fold up on both left and right sides
- Scrapers can be easily removed without tools
- Machine is equipped as standard with 1 manual hand crank
- Hand crank mounts on left and right
- Dough catch trays on both sides
- Fast spare parts supply within 1-2 working days
Special features already included in price:
- Operation via reversing lever possible
Very practical when standing at the side of the machine for better monitoring of the dough sheet
Optional, for an additional charge:
- Machine equipped with original RONDO plastic belts
+ €799 net
Please note: Conversion may increase delivery time!
Pjdpfeivdlpox Ahgjpu
Technical data:
- Belt width: 640 mm
- Roller width: 660 mm
- Table length: 3,320 mm
- Roller adjustment: from 0.2 mm to 45 mm (depending on product)
- Speed: approx. 65 cm/sec
- Motor power: 1.1 kW
- Power requirements: 400 V – 3Ph – 50Hz
- Fuse: 16A CEE plug
- Dimensions:
--- Working position: 3700 x 1235 x 1200 mm (WxDxH)
--- Parked position: 2150 x 1235 x 2170 mm (WxDxH)
- Net weight: 240 kg
Mažas skelbimas
Haiger
1 159 km
Vikerso kietumo matuoklis
3-Rath Kalibrier+Prüftechnik GmbH & Co.VHT-500B
Skambinti
Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: 530211, Features
→ Robust cast iron machine housing
→ Automatic application and release of test force
Podpfx Asc Ipc Uehgjpu
→ Automatic switching between objective and indenter
→ LED illumination
→ Digital measuring eyepiece
→ LCD color display with touch screen
→ Conversion to other hardness scales (e.g., HRC)
→ Easy operation
Technical Data
→ Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30)
→ Vickers testing method
→ Eyepiece 10X
→ Automatic objective turret
→ Objectives 10X / 20X / 40X
→ Test force application 50µm/sec
→ Maximum specimen height: 210mm
→ Maximum specimen depth: 160mm
→ Compliance: DIN EN ISO 6507 / ASTM E-384
→ Weight approx. 75kg
→ Power supply 230V / 50Hz
Scope of Delivery
→ Hardness tester
→ Diamond indenter 136° Vickers
→ Flat test table Ø80mm
→ Prism support Ø80mm
→ Eyepiece
→ Objectives 10X / 20X / 40X
→ LED illumination
→ Power cable
→ Accessory case
→ Operating manual
OPTIONS
→ VMS3 software (video measuring system)
→ Cross-table 200x200mm (travel distance 25 x 25mm)
→ Digital depth micrometer (for transmitting edge distance into VMS3 software)
→ "Automatic Measurement" module (only in conjunction with VMS3 software)
→ PC system / monitor
Mažas skelbimas
Gelsenkirchen
1 179 km
Hidraulinis C presas
DurendusMontagepresse
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, spaudimo jėga: 20 t, For sale is a C-frame assembly and small batch press manufactured by DURENDUS, with a maximum pressing force of 20 t. The machine features a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small batch production, pressing-in operations, and straightening processes in industrial applications.
#####
Technical Data & Information:
C-Frame Assembly and Small Batch Press – 20 t – 700 × 920 mm
==== General Information
- Design: C-frame / single-column press
- Manufacturer: DURENDUS
- Pressing force: 5–20 t (adjustable)
- Max. installation height: 550 mm
- Table size: 700 × 920 mm
- Press head: Ø 100 mm
- Table height above floor: 1,000 mm
- Overall dimensions (W×D×H): 900 × 900 × 2,340 mm
- Total weight: approx. 1,200 kg
- T-slots: DIN 650 – 22 mm or as per customer specification
- Forklift pockets: present
- Workspace lighting: present
==== Hydraulic Cylinder
- Stroke: 0–400 mm (adjustable)
- Cylinder diameter: Ø 110 mm
- Piston rod diameter: Ø 65 mm
- Max. operating pressure: 280 bar
- Return speed: 50 mm/s
- Working speed: 10 mm/s
- Idle speed: 10 mm/s
- Pressure build-up time: max. 2 sec. (steel on steel)
==== Hydraulics & Drive
- Hydraulic pump: ASC
- Flow rate: 24 l/min
- Motor power: 3 kW
- Pressure accuracy: ±5 bar
- Tank capacity: 60 l
- Valve technology: DUPLOMATIC
- Filtration technology: FILTREC
- Oil level monitoring: electronic
- Cooling: oil/air cooling
- Hydraulic unit: mounted at the rear, top
==== Controls
- Operation: foot pedal or hand lever
- Pressure adjustment: via rotary control
- Stroke limitation: via adjustable sensors
- Selector switch: foot/hand operation
- Control cabinet components: mainly SIEMENS
Ppedey Sx Uwjpfx Ahgeu
==== Safety
- Emergency stop button
- Stroke limitation
- Robust steel construction
- CE-compliant design
==== Electrical Connection
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Main motor power rating: 3 kW
- Total connected load: max. 5 kW
#####
Areas of application: assembly work, small batch production, press fitting, straightening, toolmaking, jig and fixture construction, metalworking, maintenance, workshop operations, service assignments
(hydraulic press, hydraulic power press, C-frame press, single-column press, assembly press, small batch press, workshop press, 20 t press, 20 ton press, press fit press, straightening press, industrial press, C-frame press)
Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with the German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements by fully complying with the national Brazilian safety standard NR 12, which is based on these regulations. Our key strength is special machine construction and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.
Mažas skelbimas
Győr
937 km
CNC tekinimo staklės
OkumaLB2000 EX II MYC
Skambinti
Būklė: naujas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Standard technical data:
Turning diameter over bed: 580 mm
Turning diameter over carriage: 470 mm
Max. machinable diameter: 360 mm
Machinable workpiece length: 250 mm
Travel (X): 260 mm
Travel (Z): 350 mm
Travel (Y): 100 mm (+-50)
C axis: 360° (0.001° incremental)
Spindle speed: 50-6,000 rpm
Spindle nose: JIS A2-6
Spindle bore diameter: Ø62 mm
Front spindle bearing diameter: Ø100 mm
Turret type: M-V12
Number of tools: 12
Tool size: 20x20 mm
Tool shank diameter: Ø32 mm
Tool change time: 0.1 sec
Driven tool speed: 45-6,000 rpm
Rapid traverse (X): 25 m/min
Rapid traverse (Z): 30 m/min
Rapid traverse (Y): 12.5 m/min
Main motor power (15 min/continuous): 11/7.5 kW (PREX)
Driven tool motor power: 5.5/3.7 kW (PREX)
Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm
Machine weight: 4,050 kg
Control: OSP P300L
Psdpfey H H Afox Ahgepu
Standard specification
1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L
CNC controller including CE mark & EMC
1 set
European Standard Specification
1-1. V12 radial turret, 1 set
1-2. Main spindle, 1 set
(1) Spindle speed, 50-6,000 min⁻¹ (1 set)
(2) Spindle motor Prex 11/7.5 kW (1 set)
(3) Spindle: JIS A2-6; bore Ø62 (1 set)
(4) C-axis control, 360°, (0.001° incremental) (1 set)
(5) SR1146 hydraulic cylinder for chuck (1 set)
1-3. MT4 tailstock
1-4. Double-actuation pedal for chuck and tailstock side, 2 sets
1-5. Driven tool motor, PREX 5.5/3.5 kW (2 min continuous) 1 set
1-6. Driven tool speed, 45 - 6,000 min⁻¹, 1 set
1-7. Work area lighting, 1 set
1-8. Full enclosure, 1 set
1-9. Chip tray, 1 set
1-10. Door interlock, 1 set
1-11. Lubrication monitoring, 1 set
1-12. Automatic chuck open/close on main spindle, 1 set
1-13. Chip air blow, 1 set
1-14. Foundation bolts, 1 set
1-15. Tool setter, 1 set
1-16. CE marking, 1 set
1-17. IEC standard compliance, 1 set
1-18. Transformer, 1 set
1-19. Coolant system with 250W pump, 1 set
1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set
1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set)
*Multitasking machines Coordinate conversion (1 set)
*Multitasking machines Profile generation (1 set)
*Advanced One Touch IGF (graphical programming assistant,
dialogue-based programming interface) (1 set)
*Real 3D simulation (1 set)
*Cycle time over check (cycle time monitoring)
*Load monitor (1 set)
*NC operation monitor (program run monitoring) (1 set)
*Cycle time reduction function (1 set)
*Hi-Cut Pro (machining-dependent servo optimization) (1 set)
*Variable spindle speed control (1 set)
1-22. 2-level status indicator lamp, 1 set
1-23. Program storage 2GB, 1 set
1-24. Operational memory: 2MB, 1 set
1-25. Spindle orientation, electric, 1 set
1-26. Inch/metric conversion, 1 set
1-27. Ball screw pitch error compensation on X/Z axis, 1 set
1-28. Workpiece ejection monitoring, 1 set
1-29. Lifting lugs, 1 set
1-33. TAS-C thermal compensation on frame
6” chuck
Chip conveyor
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
İkitelli OSB
1 609 km
20 mm x 3100 mm hidraulinės giljotininės žirklės
CRONOSSTECHHGM B20-3100
Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: P40T 5,7", darbinis plotis: 3 100 mm, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 37 kW (50,31 AG), Įranga: CE žymėjimas, Tipinė plokštelė prieinama, apsaugos šviesos užtvara, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, HGM B20-3100 – 20 mm x 3100 mm Hydraulic Guillotine Shear
Manufactured in Turkey by CRONOSSTECH, the HGM B20-3100 Hydraulic Guillotine Shear is engineered for heavy industry, steel construction, shipbuilding, energy sectors, and high-capacity metalworking applications, featuring a 20 mm sheet cutting capacity and 3100 mm cutting length.
With the ELGO P40T touch-screen CNC control unit, motorized backgauge system, Rexroth hydraulic system, and dual-speed cutting technology, it delivers high performance and precise cutting operations.
Standard Features
• Throat Depth: 250 mm
• Cutting Length: 3100 mm
• Cutting Angle: 2.75°
• Clearance Between Columns: 3410 mm
• Cutting Capacity: 20 mm
• ELGO P40T 5.7” Touchscreen CNC Control Unit
- 5.7” TFT touchscreen
- Manual mode
- Single cut operation
- Program memory
- Digital outputs up to 2A
- Automatic cutting angle and clamping force calculation based on material
- Automatic cutting program
• Rear Sheet Support System
- RTS (Return To Sender) function
- Manual Blade Clearance Adjustment System
- Programmable Backgauge Retract System
- Automatic lifting for parts over 1000 mm
• CRONOSSTECH Motorized NC Controlled Backgauge (X Axis)
- X axis movement: 1000 mm
- Speed: 150 mm/sec
- Accuracy: ±0.05 mm
- Steel construction
- Hardened ball screw
- Optional: 1250 mm or 1500 mm travel
• Front Support Arms
- 1000 mm length
- Ruler measurement system
- T-slot
- Flip-stop
• Hinged Front Finger Guard
- 1000 mm hinged front guard cover
- Optional full-length opening guard
• Upper Blade
- 2 cutting edges
- 450 N/mm² capacity
• Lower Blade
- 4 cutting edges
- 450 N/mm² capacity
Ppodpjzbyupjfx Ahgju
• Foot Pedal with Emergency Stop
• Rear Safety System (EOS2E 2BX)
- 2 laser beams
- Type 2 – SIL1 – SILCL1 safety level
- 510 mm monitoring height
- 3 ms response time
- IP65 / IP67 protection
- 24V DC power supply
• Emergency Stop Buttons
• Shadow Line Lighting
• Ball Transfer Table
• Schneider or Siemens Electrical Components (400V / 50Hz)
• CRONOSSTECH Premium Front and Rear Cabin Guards
- Professional appearance
- Wide viewing area
- Ergonomic design
• Rexroth Hydraulic System
• Dual-Speed Cutting System
- Two selectable cutting speeds
- Faster operation on short parts
- High-speed cutting up to 60% of maximum capacity
• Energy-Efficient Standby Mode
Optional Features
• 1250 mm or 1500 mm X-axis backgauge
• Full-length opening front guard
Technical Specifications
• Cutting Capacity (450 N/mm²): 20 mm
• Cutting Capacity (700 N/mm²): 13 mm
• Cutting Length: 3100 mm
• Cutting Angle: 2.75°
• Number of Hold-Down Cylinders: 17
• Cutting Speed / Fast Mode: 6 / 9 spm
• Clearance Between Columns: 3410 mm
• Table Height: 925 mm
• Table Width: 605 mm
• Throat Depth: 250 mm
• Backgauge Stroke (X Axis): 1000 mm
• Machine Length: 4790 mm
• Machine Width: 3850 mm
• Machine Height: 2540 mm
• Oil Tank Capacity: 495 L
• Motor Power: 37 kW
• Machine Weight: 19 Tons
This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷
Mažas skelbimas
Viersen
1 240 km
Matavimo sistema
KeyenceVHX 700F
Skambinti
Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Keyence VHX 700F Measuring Microscope in fully functional condition.
- Base unit VHX 700F
- Stand VHX-J20
- Objective lens VH-Z20R
- Reference object (calibrated glass scale)
- User manual
Pedpfxsw Ah Axe Ahgepu
Camera
Scanning method: Progressive
Image sensor:
1/1.8-inch, 2.11 million pixel CCD sensor
Total pixels: 1688 (H) x 1248 (V)
Effective pixels: 1628 (H) x 1236 (V)
Usable pixels: 1600 (H) x 1200 (V)
Frame rate: Selectable between 15 fps and 28 fps
Resolution: 2 megapixels, 1600 (H) x 1200 (W), approximately 1000 TV lines
Gain: AUTO, NORMAL, PRESET
Electronic shutter:
AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000
Supercharge shutter: 0.2 sec to 17 sec, adjustable in 0.1 sec steps
White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K)
Back focus adjustment: Not required
LCD Monitor: Color LCD (TFT), 17-inch *1
Panel size: 365.76 (H) x 228.6 (W) mm*1
Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1
Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1
Display colors: Approx. 16,770,000 colors *2*1
Brightness: 270 cd/m² (typ.)*1
Contrast ratio: 450:1 (typ.)*1
Viewing angle: ±80° (typ., horizontal), ±70° (typ., vertical)*1
Hard drive
500 GB (incl. 80 GB reserve storage)
Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed)
Image format
JPEG/HD Photo (compressed), TIFF (uncompressed)
Viewable image size: 1600 pixels (H) x 1200 pixels (V)
Light source: 12 V, 100 W halogen lamp
Video output: Output format DVI-I 1920 x 1200 pixels
Output scan frequency
#8378
Mažas skelbimas
Porta Westfalica
1 030 km
Koordinačių matavimo mašina
KeyenceDigitalmikroskop VHX 6000
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance.
Condition:
Used, very good condition, fully functional.
Non-smoking environment, no damage.
✅ Technical Specifications:
Magnification: 0.1× to 5,000× (current configuration up to 2,500×)
Image resolution: up to 4,800 × 3,600 pixels
Sensor: 1/1.8-inch CMOS
Frame rate: up to 50 frames/sec
Depth of field: High depth of field even in live view
Measurement functions: 2D and 3D measurements (angle, area, volume, roughness)
Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography
Illumination: Multi-lighting function, LED light source
Monitor: 23" IPS color display, Full HD
Software: License-free measurement and analysis software
Power supply: 100–240 V AC, 50/60 Hz
Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg
✅ Features:
Fully automatic image capture and measurement
Observation from various angles without manipulating the sample
Creation of 3D images and surface scans
Pedpfxextbpde Ahgepu
Ideal for quality control, material analysis, research & development
📦 Scope of delivery:
Keyence VHX-6000 control unit
Camera unit
23" monitor
Motorized X-Y stage
Objectives (e.g. VH-Z20T, VH-Z250T)
Power supply and cables
Original software
🚚 Shipping & Collection:
Collection by arrangement
Mažas skelbimas
İkitelli OSB
1 609 km
13 mm x 4000 mm hidraulinės giljotininės žirklės
CRONOSSTECHHGM B13-4000
Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: ELGO, valdiklio modelis: P40T 5.7”, darbinis plotis: 4 000 mm, pjovimo kampas (min.): 2,1 °, eigos dažnis (min.): 15 aps./min, maks. lakšto storis: 13 mm, plieno lakšto storis (maks.): 13 mm, atgalinio ribotuvo reguliavimas: valdomas CNC, galia: 22 kW (29,91 AG), garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, Tipinė plokštelė prieinama, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Key Advantages
✔ 13 mm sheet cutting capacity (450 N/mm²)
✔ 4000 mm cutting length
✔ ELGO P40T 5.7” touchscreen NC control unit
✔ NC-controlled motorized backgauge system
✔ Program memory
✔ Automatic cutting program
✔ Dual-speed cutting system
✔ Energy-saving standby mode
✔ Rexroth hydraulic system
✔ Premium front and rear cabin guarding system
✔ Transfer table and ball transfer system
✔ Shadow line cutting illumination
✔ Heavy-duty steel construction body
Standard Features
ELGO P40T 5.7” Touchscreen NC Control Unit
5.7” TFT touchscreen display
Manual operation mode
Single piece processing mode
Program memory
Digital outputs up to 2A
Automatic calculation of angle, pressure, and blade clearance according to material thickness
Automatic cutting program
Back sheet support system control
RTS (Return To Sender) function
Manual Blade Clearance Adjustment System
Programmable Backgauge Return System
Automatic upper lift for pieces over 1000 mm
CRONOSSTECH X Axis Motorized NC Controlled Backgauge System
NC-controlled automatic X-axis movement
1000 mm travel distance
150 mm/sec speed
±0.05 mm positioning accuracy
Steel construction body
Hardened ball screw drive
Front Support Arms
1000 mm length
Measurement ruler system
T-slot design
Foldable stop arms
Movable Front Finger Guard System
1000 mm opening front guard cover
Upper Blade
2 cutting edges
450 N/mm² material capacity
Lower Blade
4 cutting edges
450 N/mm² material capacity
Foot Pedal
Specially designed pedal with emergency stop function
Activates pressure cylinders and cutting motion simultaneously
Rear Safety System (excluding CE)
Model: EOS2E 2BX
2 laser beams
Type 2 – SIL1 safety level
510 mm monitoring height
3 ms response time
Ppedpfxezbqw Io Ahgsu
IP65 / IP67 protection class
Operating temperature: -30°C / +55°C
24V DC power supply
Emergency Stop Buttons
Shadow Line for Cutting Reference
Ball Transfer Table
Electrical Equipment
Schneider or Siemens
400V / 50Hz
CRONOSSTECH Premium Cabin System
Front and rear protective cabins
Wide viewing angle
Ergonomic operation
Professional industrial design
Hydraulic System
Rexroth hydraulic block
Dual-Speed Cutting System
Two cutting speeds
High efficiency for short pieces
High-speed operation up to 60% of max cutting capacity
Energy Saving Standby Mode
Optional Features
Automatic Blade Clearance Adjustment System
ELGO P40T touchscreen control integration
Automatic blade clearance adjustment according to sheet thickness
Pneumatic Sheet Support System
Type 1
Dual-position system
Extended X Axis Backgauge
1250 mm
1500 mm
Extended Front Support Arms
1500 mm
2000 mm
3000 mm
Full-Length Movable Front Guard System
Technical Specifications
Cutting Capacity (450 N/mm²): 13 mm
Cutting Capacity (700 N/mm²): 8 mm
Cutting Length: 4000 mm
Cutting Angle: 1.8°
Number of Pressure Cylinders: 18
Cutting Speed / Fast Mode: 9 / 15 cpm
Distance Between Columns: 4310 mm
Table Height: 930 mm
Table Width: 660 mm
Throat Depth: 250 mm
Backgauge Travel (X): 1000 mm
Machine Length: 5665 mm
Machine Width: 3785 mm
Machine Height: 2380 mm
Hydraulic Oil Tank: 350 litres
Motor Power: 22 kW
Machine Weight: 18.5 t
Palengviname jums paiešką: "seca širdies monitorius"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.



















































































































































