Balu presas

ANIS ATS 110-75S-9CT-30kW

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Isdevf E Avspfx Aausar Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Ijdpfx Asv T I Eveauear Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 8 900 h, mašinos/transporto priemonės numeris: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum volume output under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7-9 t/h - 50 kg/m³ = 8-9 t/h - 100 kg/m³ = 11-14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Charging chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs. - Pressing force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank capacity: 600 l - Electric motor power 400 V, 50 Hz: 1 × 45 kW - Oil cooler: 1 × 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: chain conveyor - Year of manufacture: 2014 Iaedpfx Aaeyrhi Nousr - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Press, control cabinet, operator panel, conveyor belt for sale. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We do not accept any liability for technical information or possible errors. Video material can be provided upon request.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 24 967 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 004283-0030, spaudimo jėga: 122 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, garantijos trukmė: 24 mėnesiai, paskutinio kapitalinio remonto metai: 2026, Įranga: dokumentacija / vadovas, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. It concerns a HBC120s baler (90kW) equipped with, among other features, cross-tying (5 vertical wires & 5 horizontal wires). At the time of writing, the baler is undergoing a complete overhaul in our refurbishment workshop. This refurbishment is carried out strictly in accordance with the Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S Volume capacity m³/hour max. - 815 660 500 Bulk density kg/m³ max. - 20 50 100 Isdpfxsxcir Ee Aauear Throughput capacity T/hour max. - 16.3 33 50 The above capacities apply only when the machine is operated properly and supplied continuously for at least one hour with suitable material. Bale weight - +/- 1470 kg, depending on, among other factors, material type and bale length Bale length - variable / can be set Bale height - 1100 mm Bale width - 1100 mm Hopper dimensions - 1100 mm x 1600 mm - These dimensions also determine the maximum material size that can be loaded into the machine. Ram pressure force - max. 119.7 ton Pre-press flap pressure force - max. 65 ton Cycle time, excluding wire knotting time - 19 seconds Main motor output - 90 kW (120 HP) Motor Twistomat (knotter) - 1.5 kW (-- HP), SEW Motor counter pressure pump - 1.1 kW (2 HP) Motor needle installation - 7.5 kW (-- HP), SEW Motor oil cooler fan - 3 kW (4 HP) Motor oil cooler pump - 4 kW (5.5 HP) Operating pressure - 315 bar Machine weight - approx. 40,040 kg Number of wires - 5 vertical - 5 horizontal Oil capacity - 1,655 litres Oil brand & grade - BP-SHF-46 Colour - baler RAL 6024 (green) - safety doors RAL 1021 (cadmium yellow) Baler dimensions - length 11,765 mm - width 2,500 mm - height 7,104 mm.

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 11 850 h, spaudimo jėga: 88 t, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), Te koop: gebruikte pers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 Pers betreft type VK 88 R – FU, met frequentieregelaars, 2 x 45 kW motoren. * Ontblokkeringscilinder-optie * Kogelgewrichtsbevestiging hoofdcilinder * Stadler transportband, 1600 mm binnenmaat Bouwjaar: 2012 11850 bedrijfsuren Rondstang hoofdcilinder en afdichtingsset zijn nieuw. Te vervangen: 2 secties van de vloer voorin de perskamer: midden en voorkant richting kanaal Smering / vervanging: Enkele zijdiabolos zijn gebruikt en draaien, sommige zijn geroest, andere in goede staat. Pers loopt goed en knoopmechanisme functioneert naar behoren. Iedpsyuyg Sofx Aausar Ramwielen OK Zijwielen ram OK Stang hoofdcilinder: nagenoeg nieuw Afdichtingsset hoofdcilinder: nagenoeg nieuw Nylon strips ramzijden: 80–90% goed. Nageven en geometrie finetunen (klant heeft reserveonderdelen op voorraad) Mes/tegenmes: goed, 70% Naaldwielen: oké, maar vervanging aanbevolen + sluitplaten Frequentieregelaar hoofd 1 van 2: In totaal 2 x 45 kW; één is defect. Onbekend of deze wordt vervangen. Pers draait nu op één pomp. Zijwanden perskamer: Zijwanden zijn versleten waar de nylon geleideplaten schuiven: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen gebruikt, met enige speling. Smering ontbreekt, maar verder in goede staat. Geleidestrips in orde. Vingerlatten/opvoerlatten zijn vrijwel allemaal versleten. Start/stop via frequentieregelaar. Zijwanden in het schuine deel en in de put in orde. Draadafrolplatform: niet inbegrepen.

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Isdjymmtcepfx Aauear Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Iodsyz Af Eepfx Aausar Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, paskutinio kapitalinio remonto metai: 2026, Įranga: dokumentacija / vadovas, HSM VK 4812 P Year of manufacture: 2017 Iasdpfx Aaoyyi Svsuor Fully automatic baler. The machine has undergone maintenance and servicing by an authorized HSM service center located in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Compressed material: film, mixed paper, cardboard, punching waste Bale tying: 4-fold wire binding We also have other balers in stock. Transport costs depend on weight, volume, and most importantly, distance. For inquiries, the following information is important: delivery address (postal code and city); for further details, a telephone conversation is required. Please ask about transport costs and other shipping options by contacting us by phone. Our contact details can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our large storage capacity, can supply larger quantities flexibly and quickly. We issue intra-community invoices – VAT exempt. Opening hours: Mon-Fri: 8:00 am - 4:00 pm Sat: closed