Gamybos presas

Hidrobrasil Viersäulenpresse

Hydraulic 400-ton Column Press

Suitable for continuous shift operation, with the following basic specifications:

a) Closing speed: 100 – 450 mm/sec

b) Opening speed: 50 – 250 mm/sec (adjustable via touchscreen)

c) Pressing speed: 5 – 60 mm/sec (adjustable via touchscreen)

d) Piston accumulator with approx. 4 nitrogen cylinders

e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns)

f) Total table size: 3400 x 1700 mm

g) 28 mm T-slots according to customer specifications

h) Table, ram, and press head are stress-relieved annealed.

i) Column diameter: 250 mm

j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm)

k) Overall machine dimensions approx. 3900 x 2200 (footprint) x 5700 mm height
Gjdpjg Iihwsfx Agdjip

l) Oil temperature monitoring (adjustable via touchscreen)

m) Automatic lubrication (adjustable via touchscreen)

n) Free positioning of the ram (adjustable via touchscreen)

o) KEYENCE light barriers, 14 mm, on front and rear sides

p) Oil circulation cooling (adjustable via touchscreen)

q) Pressure-holding valve 0 to 600 sec. (adjustable via touchscreen)

r) Table plate size 3400 x 1700 mm, precision milled

s) Laterally monitored doors, 1200 mm high, 1000 mm wide

t) RITTAL control cabinet, 2200 mm wide, up to 20 m distance from the press

u) Pressure adjustment from 50 to 400 tons (adjustable via touchscreen)

v) Stroke limitation selectable by pressure or position

w) Programmable operation, setup mode, single stroke + continuous stroke (adjustable via rotary switch)

x) Swiveling control console with 15-inch touchscreen monitor

y) Two-hand operation on both sides

z) Prepared for automatic material feed (SIEMENS S7 1500)

aa) Machine frame primed and painted

bb) Installation, commissioning, and training available at additional cost

The hydraulics of the presses we offer are configured exclusively with BOSCH-REXROTH/Parker/HAWE components. Only (SIEMENS) components that are readily available in Germany are used in the control cabinet. Safety technology is supplied entirely by SICK, except for the light barriers.

The control system is provided by SIEMENS (S7 1500), including the 15-inch touchscreen monitor. The delivery also includes the SIEMENS remote maintenance unit SECOME Ethernet.

SPECIAL FEATURE: Our design with two press cylinders and the piston accumulator allows full performance to be achieved with a main motor of just 90 kW.

Technical details are provided below in 1.3.

Technical Specifications

Design
Press design: Column press
Thermal neutral: 80 – 120°C
Number of operating sides: 2

Forces
Pressing force max.: 4,000 kN
Free pull-off force max.: 600 kN
Pressure build-up time (closed tool steel to steel): Max. 2 sec

Dimensions – Minimum intended tool height: 600 mm
Maximum opening width: 1600 mm
Stroke and min. opening: 1000/600 mm
Table height above floor: 820 mm
Height above floor (overall height): approx. 5700 mm
Hall height min.: 7000 mm
Parallelism deviation at 20°C: +/- 0.1 mm
Deflection (determined at max. closing force with 70% occupancy): ≤ 0.17 mm/m

Weight
Total weight of the press without operating materials: approx. 52 t

Speeds (see attached cycle diagram)
Rapid-closing: 100 – 450 mm/s
Pressing speed at F max.: [data continues]

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.