Miltelių presas

Hidrobrasil Viersäulenpresse

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, spaudimo jėga: 400 t, Hydraulic 400-ton Column Press Suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 – 450 mm/sec b) Opening speed: 50 – 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 – 60 mm/sec (adjustable via touchscreen) d) Piston accumulator with approx. 4 nitrogen cylinders e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots according to customer specifications h) Table, ram, and press head are stress-relieved annealed. i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 (footprint) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light barriers, 14 mm, on front and rear sides p) Oil circulation cooling (adjustable via touchscreen) q) Pressure-holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision milled s) Laterally monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m distance from the press u) Pressure adjustment from 50 to 400 tons (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programmable operation, setup mode, single stroke + continuous stroke (adjustable via rotary switch) x) Swiveling control console with 15-inch touchscreen monitor Godpfx Acjg Iihwsyeip y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine frame primed and painted bb) Installation, commissioning, and training available at additional cost The hydraulics of the presses we offer are configured exclusively with BOSCH-REXROTH/Parker/HAWE components. Only (SIEMENS) components that are readily available in Germany are used in the control cabinet. Safety technology is supplied entirely by SICK, except for the light barriers. The control system is provided by SIEMENS (S7 1500), including the 15-inch touchscreen monitor. The delivery also includes the SIEMENS remote maintenance unit SECOME Ethernet. SPECIAL FEATURE: Our design with two press cylinders and the piston accumulator allows full performance to be achieved with a main motor of just 90 kW. Technical details are provided below in 1.3. Technical Specifications Design Press design: Column press Thermal neutral: 80 – 120°C Number of operating sides: 2 Forces Pressing force max.: 4,000 kN Free pull-off force max.: 600 kN Pressure build-up time (closed tool steel to steel): Max. 2 sec Dimensions – Minimum intended tool height: 600 mm Maximum opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (determined at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 t Speeds (see attached cycle diagram) Rapid-closing: 100 – 450 mm/s Pressing speed at F max.: [data continues]

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, veikimo valandos: 11 500 h, mašinos/transporto priemonės numeris: 3098, lazero valandos: 6 900 h, lazerio galia: 10 000 W, maks. lakšto storis: 30 mm, plieno lakšto storis (maks.): 30 mm, galia: 10 kW (13,60 AG), paskutinio kapitalinio remonto metai: 2024, darbo diapazonas: 4 020 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series featuring the following specifications: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Technical Data: Model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data (Drilling Unit): Drilling capacity: Ø 4 mm - Ø 30 mm Thread cutting: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Gedpfjvw Tdlsx Acyoip Tool cooling: internal cooling Tool change: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removing drilling chips Donaldson® Filter System DFPRO 6 Cyclopeel Fan output: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software Includes Witt gas mixer The machine was always operated with a maintenance and support contract.

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0362, spaudimo jėga: 250 t, Pressure: 250 t Passage width: 1800 mm Stroke: 600 mm Total power requirement: 22 kW Machine weight approx.: 24 t Dimensions L x W x H: approx. 3390 x 3400 x 3800 mm Column diameter: 160 mm Return force: 25 t Max. working height: 800 mm Table size: 1800 x 1600 mm Ram size: 2350 x 1600 mm Table height above floor approx.: 900 mm Hydraulic table traverse: 25 mm/sec Max. table load: 5 t Advance speed: 10 mm/sec Pressure phase speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 600 l Oil cooling (electric): 1.5 kW (max) Recommended oil: 46 grade / 10 my Monitor SIEMENS: 10 inch Vibration damping pads: The machine stands on four specially manufactured damping pads, each measuring 450x450x85 mm. Oil tank with oil cooling: The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which is activated at 30°C. Oil filtration system: Gisdsfxyinopfx Acyjp Independent from the main and cooling pumps, the press is equipped with a separate filtration circuit. The pump runs continuously but consumes only 1.5 kW. Energy-saving function: If the main pump is not required for a preset period, it switches to energy-saving mode and then consumes only about 2 kW/h. It is immediately fully operational again when pressure is required. Safety technology: Optionally, SICK or Pilz safety PLCs can be selected. The light barriers are either from the same manufacturer or from German manufacturer SCHMERSAL. Control cabinet: 40% of the cabinet space remains available for future installations. All components inside the cabinet are supplied by SIEMENS. Screws: All screws used on the machine are zinc-plated or yellow galvanized. Oil tray: The hydraulic block and pump are placed in a small oil tray to catch any oil during maintenance or hose changes. Noise emission: The press produces a maximum of 67 decibels according to standards. Accessories: Roller loading bridges: Two 1500 mm long loading bridges with rollers, removable, supports equipped with large heavy-duty casters. Parallelism monitoring: Both cylinders are monitored for parallelism using Balluff linear measurement systems and Sick wire-draw sensors. Parallelism monitoring is activated at the start of the pressing process. Monitoring precision can be configured in the control system. The function is deactivated during no-load travel. The respective positions are measured at the left and right sides of the ram using two SICK draw-wire encoders. The controller opens or closes the oil flow to the cylinders through special fast-acting valves. The required parallelism accuracy is less than one millimeter across the entire width.

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0329, spaudimo jėga: 350 t, Press force: 350 t Passage width: 3000 mm Stroke: 900 mm Total power requirement: 75 kW Machine weight approx.: 60 t Dimensions (L x W x H): 2660 x 5400 x 5700 mm Return force: 35 t Table size: 3610 x 1600 mm Ram size: 3610 x 1600 mm Table height above floor approx.: 900 mm Approach speed: 230 mm/sec Return speed: 170 mm/sec Gijdpfxefxygzj Acysp Oil tank: 2000 l Max. working height: 1700 mm Pressure phase speed: 21 mm/sec Rapid traverse speed: 200 mm/sec Oil cooling (electric): 3 kW (max) Control: SIEMENS S7 1500 Monitor: WEG 12 inch

Gamybos metai: 2023, būklė: beveik kaip naujas (parodų įrenginys), Downstroke press Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heated platen as solid steel hot plate Electrically heated up to 250°C Control system: Siemens S7-1200 with 12" touch panel Mechanical safety door Data logging Gedpfx Acekuz T Usyoip

Būklė: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0116 - Rev.00, spaudimo jėga: 110 t, Press force: 110 t Passage width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other component colour: RAL 7021 Giodpfx Asdxvflscyop Cladding and balcony colour: RAL 1021 Motor power: 18 kW Max. rapid advance speed: 300 mm/sec Pressing phase speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200

Būklė: naujas, mašinos/transporto priemonės numeris: DF0279, spaudimo jėga: 1 000 t, Pressure: 1000 t Clear width: 1500 mm Stroke: 800 mm Total power requirement: 91 kW Machine weight approx.: 68 t Dimensions (L x W x H): 3850 x 2900 x 6000 mm Return force: 100 t Table size: 1500 x 2250 mm Ram size: 1500 x 2250 mm Table height above floor approx.: 1300 mm Advance speed: 200 mm/sec Return speed: 200 mm/sec Pressing speed: 10 mm/sec Oil tank: 1200 l Oil cooling (electric): 1.5 kW (max) Max. working height: 1000 mm Giedpfsfxyiyex Acyep Rapid traverse speed: 200 mm/sec Monitor: WEG 12 inch

Būklė: geras (naudotas), Atidarymo plotis: 150x80 mm 2 rotaciniai peiliai (95 mm) Gijdpfx Ajfhnv Ijcyop

Būklė: naudotas, Gamybos metai: 2019, spaudimo jėga: 250 t, Pressure: 250 t Passage width: 2500 mm Stroke: 500 mm Total power requirement: 60 kW Machine weight approx.: 39 t Dimensions (L x W x H): 2720 x 3750 x 4350 mm Retraction force: 25 t Max. working height: 800 mm Table size: 3090 x 1500 mm Ram size: 3090 x 1500 mm Table height above floor approx.: 1000 mm Advancing speed: 400 mm/sec Pressing speed: at 125 t, 50 mm/sec Return speed: 400 mm/sec Rapid traverse speed: 400 mm/sec Oil tank: 1500 l Oil cooling (electric): 3 kW (max) Anti-vibration pads: each 450 x 450 x 85 mm Pressure: 250 t at 220 bar t/bar Pump capacity max.: 176 L/min Recommended oil: ISO VG 46 / 10 micron Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac SIEMENS control: included Light curtains by Schmersal/Pilz: Pilz Monitor: Omron 12-inch Anti-vibration pads: The machine is mounted on 4 specially manufactured pads, each measuring 450 x 450 x 85 mm. Oil tank with oil cooling: The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump that starts operating at 40°C. Oil filtration system: Independent of the main and cooling pumps, the press is equipped with a separate filtration circuit. The pump runs continuously but only requires 1.5 kW. Gijdpfsd Nq Idjx Acysp Energy-saving function: If the main pump is not required for a set period, it switches to energy-saving mode and consumes only about 2 kW/h. It is immediately fully operational again when pressure is needed. Safety technology: Safety components are provided by Pilz. The light curtains are also from this manufacturer. Control cabinet: 40% of the space in the control cabinet is reserved for subsequent installations. All components in the cabinet are from Schneider. Screws: All screws used in the machine are zinc-plated or yellow galvanized. Oil tray: The hydraulic block and pump are located in a small oil tray to collect any oil during repair or hose replacement. Noise emission: The press produces a maximum of 75 decibels according to standards. Accessories: Roller loading bridges: 2 removable loading bridges, each 1500 mm long, with rollers and large heavy-duty castors. Parallelism monitoring: Both cylinders are monitored using Balluff linear measurement systems and Sick cable extension encoders. Parallelism monitoring is activated at the start of the press cycle. The monitoring accuracy can be configured via the control system. During idle travel, this function is deactivated. Two SICK cable encoders measure the left and right positions of the ram. The control system adjusts the oil flow to the cylinders via special high-speed valves. The required parallelism accuracy is less than 1 mm across the full width.

Būklė: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0280, spaudimo jėga: 160 t, Press force: 160 t Clear width: 1000 mm Stroke: 800 mm Total power requirement: 22 kW Machine weight approx.: 13 t Dimensions (L x W x H): 2300 x 2850 x 4000 mm Return force: 16 t Table size: 1430 x 1000 mm Ram size: 1430 x 1000 mm Table height above floor approx.: 850 mm Approach speed: 200 mm/sec Return speed: 200 mm/sec Pressing speed: 15 mm/sec Oil tank: 400 l Giedpfx Aced Ap Udsysp Oil cooling (electric): 1.5 kW (max) Max. working height: 1000 mm Rapid traverse speed: 200 mm/sec WEG monitor: 10 inch

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 3ROLL3000X50MM, apatinio volelio skersmuo: 460 mm, viršutinio volo skersmuo: 500 mm, volelio skersmuo: 500 mm, vėjo ilgis: 3 100 mm, darbinis plotis: 3 000 mm, plieno lakšto storis (maks.): 50 mm, bendras svoris: 26 000 kg, įvesties srovės tipas: trifazis, darbinis ilgis: 3 000 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, 3-Walzen Planeten-Rundbiegemaschine mit Vorstauchung, 3000 x 50 mm Oberwalzendurchmesser: 500 mm LEISTUNGSDATEN Blechbreite: 3000 mm Blechstärke: 50 mm Vorbiegeleistung: 36 mm Mindestbiegedurchmesser: 2200 mm Leistung bezogen auf Materialgüte: 355 MPa --- Reduzierte Blechbreite: 2000 mm Kapazität Blechstärke: 55 mm Gsdpfx Acjvr S S Royeip --- Minimaler Biegeradius: 600 mm Alle Zubehörteile installiert: - Gehärtete Walzen - Konische Biegevorrichtung - Digitale Positionsanzeige - Installierte Leistung: 50 PS - Maschinengewicht: 26 Tonnen