Frontgewicht 1.200 Kg pirkti naudotą (72 563)

Būklė: paruoštas naudoti (naudotas), Nuomojamas 20 pėdų smėliavimo konteineris su slėgine smėliavimo įranga, filtravimo sistema ir saugos įrenginiais Ijdpfjxl Dq Uex Aiwstl

Būklė: naujas, Gamybos metai: 2026, 10 t smėliavimo vežimėlis smėliavimo įrenginiui su pneumatiniu pavara. - Pneumatinė pavara 10 t apkrovai - Apkrova 10 t Itedpfxjyyxfre Aiwel - Matmenys: Ilgis=2000mm Plotis=2000mm Aukštis=500mm - Skirta bėgių sistemai - Su paviršiais ruošinių laikikliams - Pasukamas stalas kaip parinktis

Būklė: naujas, Gamybos metai: 2025, Injector gravity trough belt blasting machine for blasting serial parts with glass beads, corundum, ceramic beads, etc. Thanks to the gravity system, the machine achieves 15–20% higher blasting performance during operation compared to a standard injector blasting system. The machine is equipped with a bucket elevator and wind sifting for media cleaning. Up to 20 programs can be stored for different blasting processes. Itedshunz Nepfx Aiwol

Būklė: naujas, Gamybos metai: 2025, Blast wheel system type overhead rail conveyor type 1.15 2T Working area: diameter 1000mm, height 1500mm; payload 500kg with 2 blast wheels (7.5kW each) equipped with a filter unit and suspended dust filter. For technical specifications and further questions, please contact us in writing or by phone. The machines are based on production at the Grossenlüder site since 1971, with Harth & Seifert – Georg Fischer – Schiffmann und Seidl – Oliver Fritz GmbH & Co. KG and the long-standing, well-known points of contact. Iedsdrr U Sepfx Aiwetl

Būklė: naujas, Gamybos metai: 2025, Blasting hall 12x5m with blasting carriage and flat conveyor floor. Itsdpfx Ajdhliksiwol Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reprocessing unit, material bunker, abrasive refill station, free jet pressure blower, filter unit with cleaning system. Walls lined with 4mm fabric-reinforced rubber. For questions regarding technical specifications etc., please contact us in writing or by phone. The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Būklė: naujas, Gamybos metai: 2025, Konteinerinė smėliavimo įranga. 5,89 x 2,35 x 2,69 m. Konteinerinės smėliavimo įrengos su integruotu mašinų skyriumi. Plokščias transporterio dugnas, sraigtinis transporterio dugnas, kaušinis transporteris, atnaujinimo sistema, 100 l slėginis smėliavimo katilas, filtravimo sistema, ištraukimo dugnas, anga rankinei smėliavimo kabinai. Dėl techninių duomenų ir kitų klausimų prašome kreiptis raštu arba telefonu. Įranga gaminama Grossenlüder mieste nuo 1971 metų. Harth & Seifert – Georg Fischer – Schiffmann und Seidl – Oliver Fritz GmbH & Co. KG su ilgamečiais žinomais kontaktais. Nuotraukose gali būti rodomos specialios komplektacijos detalės. Iodpsdkbvcjfx Aiwotl

Būklė: naujas, Gamybos metai: 2025, Blast container with crane flap and reinforced floor. Iodefnh Rwjpfx Aiwstl 8.89 x 2.35 x 2.69 m, suitable for all standard blasting media such as chilled iron grit, corundum, garnet sand, glass beads, ceramic balls, etc. Container-based blasting systems with integrated machine room. Features include flat conveyor floor, screw conveyor floor, bucket elevator, reprocessing unit, vibrating screen, magnetic drawer, drum magnetic separator, 100L pressure blasting pot, filtration system, extraction floor, opening for use as a manual blasting cabin. Equipped with LED and emergency lighting. Cartridge filtration system and suspended dust filter. For technical queries and further details, please contact us in writing or by phone. The machines are manufactured at our location in Grossenlüder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with our long-standing, well-known contacts. Images may show optional equipment.

Gamybos metai: 2021, veikimo valandos: 60 h, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: X620DM-WL, We are selling a high-quality endoscope. We are plant engineers and have used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the probe length of 2 meters is no longer sufficient for our applications, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. TEXT from the order confirmation: Portable Video Endoscope Series VTec X - Forward or side view, white light - Latest CMOS camera technology - Bright, high-resolution 5.5" handset display Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: -White light, front LED, 3.22 lm, -White light, side LED, 6.45 lm Camera resolution: -Front, 1280 x 960 pixels, -Side, 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Articulation: ≤ 150° ±10 Articulation function: 4-way motorized joystick Power supply: Four 18650 Li-Ion batteries with protection circuit or power adapter Ambient temperature, protection class, weight: Handset: -10°C to +50°C, IP54, 1.50 kg Probe: -20°C to +70°C, IP67 Scope of delivery: - Video endoscope VTec X620DM-WL - SD-USB card reader Itedpfou Ul A Nex Aiwel - HDMI cable - Mini USB data cable incl. USB power adapter - Battery charger incl. power adapter - Power adapter - Four 18650 Li-Ion batteries with protection circuit - User manual - Carrying case Rigid oversheath with handle for 6 mm video endoscopes Working shaft length: 350 mm Including mount for 1/4” tripod thread

Būklė: naujas, TECHNICAL DATA: - Footprint: 10,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fastening materials Price examples: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus transport costs and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus transport costs and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus transport costs and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus transport costs and VAT 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus transport costs and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus transport costs and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus transport costs and VAT Further variants available. Please contact us for details. Optional accessories: - Railings - Flush wall connection - Staircase Itjdpfx Ajxpizaoiwsl - Transfer station - Impact protection - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL DESIGN & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your mezzanine floor exactly according to your operational requirements—tailored to area, load capacity, installation height and intended application. Our planning department will prepare a customised, non-binding offer based on your specifications. Whether new construction, extension or modernisation of existing systems—we support you with sound expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The additional costs depend on the place of delivery and the scope of delivery and can be requested individually from us. TERMS OF PAYMENT Payment terms must be agreed upon in the case of an order. The price is listed as a unit price/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, specialises in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage as well as machines for trade, industry, and crafts. We constantly offer interesting used products from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. ✅ Four Success Factors – The DLK formula for success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other versions available] - Grid dimension: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm P6 particleboard, raw/white - Load capacity: 500 kg - Colour: RAL of your choice Iedpjxpiztsfx Aiwjtl - Condition: new The mezzanine platforms can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Other variants available Optional accessories: - Guardrails - Flush wall connection - Stairs - Transfer station - Impact protection YOUR CONTACTS AT DLK: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard portfolio. We of course develop and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height and intended area of use. Our planning department will prepare an individual, non-binding offer tailored to your specifications. Whether for new construction, expansion or modernization of existing systems – we support you with solid expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transportation and installation. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and the scope of delivery and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed in individual cases. The price stated refers to each unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice indicating the VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machinery for trade, industry, and crafts. We continually offer a range of attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. ✅ Four to Win – The Success Components of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, TECHNICAL DATA: - Footprint: 16,000 x 20,000 mm [other variants available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: Chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor covering - Fastening material PRICE examples: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport costs and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport costs and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport costs and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport costs and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport costs and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport costs and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport costs and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport costs and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport costs and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport costs and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport costs and VAT 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport costs and VAT Optional accessories: Itodexpha Iopfx Aiwjl - Railing - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal braces instead of cross braces available at an extra charge YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your mezzanine platform precisely according to your operational requirements—customized for area, load-bearing capacity, installation height, and intended application. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and the scope of the shipment and can be requested individually from us. TERMS OF PAYMENT Payment terms must be agreed upon in the event of an order. The price is stated as a unit price/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with indicated VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machines for commerce, industry, and trade. ✅ Four to win – The four key success factors from DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other configurations available] - Grid dimensions: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: 38 mm particleboard, P6 raw/white - Load capacity: 500 kg - Colour: RAL colour of your choice, powder-coated - Condition: new The mezzanine floors can be extended in the specified grid pattern as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Scope of delivery: - Support columns - Main and secondary beams - Cross bracing - Flooring - Fastening materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus shipping and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus shipping and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus shipping and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus shipping and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus shipping and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus shipping and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus shipping and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus shipping and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus shipping and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus shipping and VAT Further configurations available Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal supports instead of cross bracing (at an additional charge) Itjdpexpii Rofx Aiwjl YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we develop and manufacture your warehouse mezzanine according to your specific operational requirements – tailored in terms of area, load capacity, build height, and intended application. Our planning department will provide you with a bespoke, non-binding quotation based on your specifications. Whether new construction, expansion, or modernization of existing installations – we support you with expert advice and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the system. Collection is possible. Delivery or shipping is available at an extra charge. Additional costs will depend on the delivery location and shipment scope, and can be individually requested from us. PAYMENT TERMS Payment terms will be agreed upon in case of an order. Prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice itemizing VAT. ✅ Four to win – The four success factors from DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, TECHNICAL DATA: - Base area: 15,000 x 20,000 mm [other configurations available] - Grid size: 5,000 x 5,000 mm - Top edge floor covering: 3,340 mm - Clear height: 3,000 mm [customisable] - Floor covering: 38 mm particle board, P6 raw/white - Load capacity: 350 kg - Colour: RAL choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Delivery scope: Ijdpfsxpic Rox Aiwjtl - Columns - Main and secondary beams - Cross braces - Flooring - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus shipping costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus shipping costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus shipping costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus shipping costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus shipping costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus shipping costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus shipping costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus shipping costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus shipping costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus shipping costs and VAT Further configurations available. Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal supports instead of cross braces, subject to surcharge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Additional costs depend on the delivery location and scope of the shipment and can be individually requested from us. TERMS OF PAYMENT Terms of payment are to be agreed upon order placement. The price is a unit/net price or as specified in the description text (plus VAT). You will of course receive an invoice stating the VAT amount. ABOUT US The company DLK, based in Nordhorn, deals in new and used products from the fields of warehousing logistics, conveyor technology, warehouse platforms, textile storage as well as machinery for trade, industry, and craft. We continuously offer attractive, pre-owned products from various manufacturers/brands at competitive prices. Please do not hesitate to contact us if you have any questions. Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Gamybos metai: 2008, būklė: geras (naudotas), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Iedjlrt Saopfx Aiwjtl Ex works, self-dismantling required Dismantling and loading can be offered optionally

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 8 mm, Lenkimo kampas (maks.): 195 °, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube diameters from 15 - 100 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be reliably achieved in series production. With a tool height of 120 mm, ample options for special profiles are available as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid construction of the mandrel carrier and bending arm, all contribute to the desired bending results. The plug-in bending tools allow for quick changeover to other tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (easily expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited numbers of programs for bending angles, length dimensions, and rotational angles for up to 50 bending sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In 'Simple Bending', the lengths and angles of the bends are automatically displayed in relation to each other. In 'Controlled Bending', the data is preset and during the bending process a continuous actual/target comparison is performed. Also available with pneumatic rotary stop or with gear-assisted length and rotational positioning. POTENTIAL APPLICATIONS: • Plant construction, e.g. chemicals • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Max. 180º bend angle achievable • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chucks • Larger bending radius up to 300 mm • Length and angle positioning via automatic braking system or manual stops with foot switch • Semi-automatic length and angle positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome at our in-house demo room • Consultation and information onsite at your facility • Consultation and processing for leasing/financing purchases via JUTEC • Trade-in of your current machine Isdpfx Aonh R Sujiwotl • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, slėgis (maks.): 250 juosta, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: Isdpfsng Exaex Aiwstl The bending machine with a free-standing bending head can be easily converted for complex geometries to right-hand or left-hand bending. The plug-in bending tools allow for rapid changeover to different tube sizes. A rapid-action hydraulic system for reducing ancillary times is a key factor in series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In "Simple Bending" mode, the length and rotation of the bends relative to each other are automatically displayed. In "Controlled Bending" mode, the data is pre-set and a permanent actual/target comparison is carried out during the bending process. This eliminates mispositioning within a tolerance window, thereby minimizing operator-induced error rates. General error messages are shown in full text on the large display. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very large tube feed, and is also available in a stationary version with a tool and mandrel rod organization system. The cost-effective alternative to fully-controlled CNC machines. POSSIBLE APPLICATION AREAS: • Hydraulics piping • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototyping Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer) • Maximum bending result: 180º • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety footswitch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic brake function or manual stops via footswitch • Automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Advisory and consultation meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: Iodpfx Ajndk N Aoiwjtl • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, lenkimo spindulys (min.): 9 mm, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry Iedsndn Agepfx Aiwjtl • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 1018, valdymo tipas: PLC valdomas, automatizacijos lygis: vadovas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 50 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. Itodpfx Aienfvy Uowsl POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) Ijdpong Ax Sefx Aiwjtl • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values Isdpfx Aong A R Sjiwjtl • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: Itjdpfxsnh R Ekj Aiwsl • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 35 mm, Vamzdžio sienelės storis (maks.): 2 mm, Lenkimo kampas (maks.): 360 °, lenkimo spindulys (maks.): 150 mm, lenkimo spindulys (min.): 32 mm, bendras svoris: 28 kg, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping Itjdpfxjnfvx Ne Aiwjl • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter Itsdpfx Ajng Amkoiwsl • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 150 050 h, Funkcionalumas: visiškai funkcionalus, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC530, sukamosios stalo skersmuo: 500 mm, bendras svoris: 13 000 kg, veleno greitis (maks.): 14 000 aps./min, veleno veikimo valandos: 6 950 h, aušinimo skysčio tiekimas: 20 juosta, veleno nosis: HSK 63, įrankių magazino lizdų skaičius: 60, Įranga: alyvos rūko separatorius, drožlių transporteris, sūkių greitis be galo kintamas, • Būklė: puiki būklė • Darbo valandos: 6 950 • KESSLER sukamasis stalas, Ø 500 mm • Įrankių žurnalas: 60 pozicijų, HSK-A63 • Vidinis aušinimo skysčio tiekimas: 20 barų, su juostine filtravimo sistema • Aušinimo skysčio sistema: automatinė aušinimo skysčio lygio stebėsena • Oras per veleną • Įrankių matavimas: BLUM lazerinis įrankių matavimo sistema • Ruošinių matavimas: infraraudonųjų spindulių ruošinio palietimo sistema (3D matavimo sistema), įskaitant ruošinio matavimo paruošimą • Susidūrimo stebėsena: POS DCM modulis • Medijų tiekimas: 3 kanalų medijų tiekimas stalo centre • Stebėjimas: pasukamas stebėjimo langas • Rankinis valdymo ratukas Itodpox Hg Ibefx Aiwol Jei domitės šia mašina, prašome tiesiogiai pateikti užklausą mūsų interneto svetainėje. Dėl techninių priežasčių pasiūlymo užklausa per išorinį portalą yra sudėtinga ir galima tik vėluojant.