Langų gamybos įranga pirkti naudotą (282)

Būklė: nepatikrintas (naudotas), Slot spindle 2 pcs. Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window system optionally available with extensive tooling ----- Bdjdpfx Akezawizoued Optionally available (at additional cost): IV 68 timber, timber/aluminum IV 78 timber, timber/aluminum IV 68 entrance doors Technical manufacturer description: ----- Pos. 1: Weinig Unicontrol 10 NC window system ----- Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool swing diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, 8 positions for edge rounding from above Horizontal rounding unit (bottom) ----- Axial adjustment mechanically coupled with crosscut saw 1st tenoning and slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 640 mm Axial adjustment: NC axis Default position below table: 5-10 mm Radial adjustment: fixed 2nd tenoning and slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 320 mm Axial adjustment: NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 1st profiling spindle (climb and conventional milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 2nd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Horizontal top profiling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 130 mm Adjustment pneumatic, 8 positions axial and radial 3rd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Vertical profiling unit (right, at machine end) ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 210 mm Adjustment pneumatic, 8 positions axial and radial Additional equipment -----...

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, 2007 m. pagamintas laminavimo presas. Šio modelio „OTT SOLID 16-32“ plokščių matmenys yra 3200 x 1600 mm, bendras slėgis – 160 t, o tarpas tarp plokščių – 400 mm. Jei ieškote aukštos kokybės laminavimo įrangos, apsvarstykite galimybę įsigyti mūsų parduodamą OTT SOLID 16-32 mašiną. Dėl išsamesnės informacijos susisiekite su mumis. Bodpjzdivcefx Akuedd • Plokščių matmenys: 3200 x 1600 mm • Bendras slėgis: 160 t • Angos plotis: 400 mm

Būklė: naujas, Finiture dažymo linija langams ir durims ----- Trumpas aprašymas: Poz. 1: 1x dvigubų bėgių pakabinamas transporteris Bdedpsy D A Hhefx Akusd Poz. 2: 1x traversų pasukimo grupė su vienu mova Poz. 3: 1x "Superjet" mirkymo sistema Poz. 4: 1x aukšto slėgio drėkintuvas Poz. 5: 1x nuotekų atskyrimo įrenginys Pasirinktinai: Mirkymo kanalas arba vonia (5-6 vonios) Išsami techninė informacija ir išdėstymas – žr. PDF priedą! ----- Nurodytos dažymo linijos kaina – pagal užklausą! ----- (techniniai duomenys pagal gamintoją – be garantijos!) Visos kainos nurodytos be PVM. Taikomas įstatymais nustatytas PVM.

Būklė: naujas, max. tool diameter 400 mm max. tool height 180 mm Operating pressure 2 bar ROTATHERM – Chamber Washing Systems are used across all sectors of industry and trade for cost-effective cleaning of a wide variety of items and materials. The parts are cleaned in a manner similar to a dishwasher. Placed in a wire mesh basket, they are washed from all sides with a hot detergent shower inside the closed machine. The unit is activated after preselecting the cleaning temperature and washing cycle duration. A centrifugal pump circulates the cleaning solution through the nozzle system, which simultaneously rotates the basket (optional motorized basket drive available). After the cleaning cycle, the machine switches off automatically. Parts can also be removed earlier; in this case, the pump will automatically shut off when the lid is lifted. ROTATHERM chamber washing systems are available at short notice in various sizes and configurations, and can be customized to meet specific requirements upon request. Generally, water-based cleaners are used, but solvents can also be employed in our cleaning machines. ATEX-compliant versions are available as required. Technical details EMSA ROTATHERM Mini: ----- Bedpfx Akjyrtyteusdd Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50 kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation flow rate: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230 V Frequency: 50 Hz Dimensions ----- Depth: 530 mm Width: 650 mm Height: 630 mm Weight: 48 kg ----- Price for base machine in the above specification: On request! Accessories: ----- Order no.: 1.521 Lid extension / max. tool length 310 mm Order no.: 1.522 Tool holder HSK 63 F for exchange with basket Order no.: 1.523 Tool holder HSK 63 E for exchange with basket Order no.: 1.524 Tool holder for Weinig Powermat for exchange with basket Order no.: 2.006 Small parts basket Order no.: 1.504 Filter unit (0.08 m²) Order no.: 1.510 Pressure gauge Order no.: 1.511 Motorized basket drive Order no.: 1.512 Mobile frame Order no.: 1.513 Castors Order no.: 1.514 Extraction device Order no.: 1.516 Oil separator / belt skimmer Order no.: 1.518 Complete system in stainless steel Order no.: 1.519 Nozzles in stainless steel ----- Prices: On request The ROTAHTERM tool washing machine is also available in larger Standard, Maxi, and XL versions. All machines are also available for special voltages. Additional charge on request. Please note: Technical data and delivery times may change with the selection of accessories! The given values are reference values. Subject to engineering changes. Delivery time: prompt and by arrangement. All prices ex works plus packaging, transport, insurance, and legal VAT. (Technical data as per manufacturer – without liability!)

Būklė: naujas, Working length: 4000, 5000 mm Working height: 120 mm Swiveling: Yes Rapid DGS 200 Double Miter Saw ----- with 420 mm saw blade diameter, manual length adjustment with digital display. Perfect dimensional and angular accuracy guaranteed. For this we employ precise and efficient drive technology: Ball bushing guides for length adjustment, spring-mounted swivel assemblies for convenient and safe angle adjustment between 45° and 90°. The length and angle adjustment of this double-head miter saw is performed manually. Enhanced operating comfort and increased performance can be achieved with the help of the digital length display. System features: ----- - Manual length and angle adjustment - Saw blade Ø 420 mm - Rugged welded steel construction - Ball-bearing linear guide with long service life - Hardened guide shafts - Electronically balanced saw blade flange - Direct drive motor - Swivel axis supported on both sides Bodpfx Asxmk Amjkusdd Digital length display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Edit 30 profile numbers (name + correction) directly on the display - Corrections are calculated based on the saw's angle position (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count is reset to "0" - Stop for short parts: automatically adjusts length and profile height according to angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-alu - Aluminium - Wood, wood-aluminium Maximum precision thanks to double-shaft linear guidance ----- With 420 mm saw blades, a wide range of aluminium or PVC profile systems can be processed. Easy operation, maximum precision and reliability make the DGS200 especially attractive for small-series insect screen production. The DGS200 double miter saw is also a popular entry-level model for window manufacturing. In woodworking, the saw is used in furniture making and interior fittings for cutting various types of trim. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 V Swivel range: manual 45° to 90° Saw blade: 420 mm diameter Cutting lengths: 4,000 mm, 5,000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5200/1200/1500 mm Weight: 800 kg (Technical data as provided by the manufacturer – subject to change.)

Būklė: naujas, Variable drilling diameter mm Number of horizontal drilling heads: 3 Number of vertical drilling heads: 4 Weight: 1,500 kg Dimensions (L/W/H): 4,800 x 1,600 x 2,400 mm Width with support: 2,300 mm Götzinger Power Drill, Type BF 315 With the Götzinger PowerDrill, depending on type and configuration, you can: - Drill handle olives on loose frame sections or on finished sashes, using a multi-spindle drilling head, quick-change system, also suitable for routing lock cases for RC2 (WK 2) security fittings or intermediate gears - Drill corner bearings on loose frame components, with a multi-spindle drilling head, quick-change system, corner positioning by stop or to measurement (tilt windows) - Vertical drilling from above for fittings, pre-drilling for clips on loose frame sections - Vertical routing from above for handles, profile cylinders, 3D hinge hardware - Horizontal drilling with 2 drilling units, with different drilling diameters, dowel drillers on the end and longitudinal sides, transoms, glazing bars, corner joints, front doors, etc. - Horizontal routing for lock cases/fittings, etc. Machine description Base frame constructed in robust welded design, linear guide for the X-axis Table support: 3,000 x 200 mm 6 pneumatic clamping cylinders with automatic retract function 2 side stops for end face processing, manually swiveling in/out 2 longitudinal stops, manually swiveling in/out Travel paths: X-axis: 3,000 mm usable length Y-axis: 180 mm Z-axis: 105 mm Units: - 1 drilling unit (Unit 1) vertically from above, drilling motor 1.1 kW, speed 1,500–12,000 rpm, 1 spindle, ER 25 collet chuck - 1 drilling unit (Unit 2) vertically from above, drilling motor 1.1 kW, speed 3,000 rpm, with quick-change head system - 1 drilling head BKF 3, olives, quick-change - 1 drilling head BKF 3/2, corner bearings, quick-change - 1 milling unit (Unit 3) vertically from above, milling motor 2 kW, 1,500–16,000 rpm, ER 25 collet chuck - 2 horizontal drilling units (Units 4 & 5), 1.0 kW, 1,500–12,000 rpm, ER 20 collet chuck - 1 horizontal milling unit (Unit 3), 2.0 kW, 1,500–16,000 rpm, ER 20 collet chuck Control: Electro-pneumatic with 3-axis control (X, Y, Z) Bdodpfx Aksd Ih Hqjujd NC positioning controller by B+R, input via 10" TFT display Machine comes complete with 1 set of drill bits sizes 6, 8, 10, and 12 mm, 2 rough/finish cutters HM 16 mm, CE compliant, ready for connection Extraction connection: 1 x 120 mm + 1 x 80 mm Power connection: 1 x 400 V, 16 A Air connection: 1 x LW 9 mm OPTION: Right/left longitudinal stops with NC axis, height adjustment programmable, allowing dimension entry based on rebate/light dimension Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight 1,500 kg ----- Total price for the above configuration, ex works: on request Plus freight and installation/commissioning (All technical specifications according to manufacturer — subject to change!)

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers Bdjdpfx Akjvnv Tqjusd - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Number of motors: 2 units Working length: 3000 mm Control: yes/CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm — For wood glazing beads, muntin bars, profile strips, aluminum strips, etc. Position 1.1 Article number: 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Pivot range: 22.5° (inside) to 135° (outside) - Right head adjustable - Saw blade mount Ø 350 mm - Incl. 1 pc. central support - Pneumatic clamping of the units - Positioning control Exenso DS3 with 15" touch panel in a dust-protected monitor housing - 3-axis control, 1 longitudinal axis and 2 pivot axes - Manual input of cutting data - Processing of data from a cutting list (data record as specified) - Processing of measuring stick data (wireless caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses Position 1.2 Article number: 942.5203 DS feed system, hydropneumatic Position 1.3 Article number: 723.0121 2 pcs. DS saw blades for wood Alternate/Bevel/Flat-toothed – positive Position 1.4 Article number: 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consists of: Pneumatic swing clamp for top clamping (free access to work table) Pneumatic horizontal clamp – anti-rotation cylinder with pressure pad The clamps can be controlled individually via the saw control Clamping sequence can also be programmed via the control Including safety pre-clamping pressure Scope of delivery for 2 sets: - 2 pcs. (left/right) vertical swing clamps - 2 pcs. (left/right) horizontal clamps Position 1.5 Article number: 942.5241 DS350 grooved table support (standard groove, special grooves per customer specification on request!) Position 3.1 Article number: 945.2007 DS350 packaging (transport frame) — Total price for this configuration ex works – on request! — ALTERNATIVE options, prices on request! — For horizontal clamping of remnants for butt-jointed glazing beads instead of Bdjdpfx Aksyy A Ikoued 2nd set Pos. 1.3 943.5236 DS combined workpiece clamping! Position 2.1 Article number: 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-rotation clamping cylinders - 2 pcs. cylinder holders with clamping lever — OPTIONAL accessories, with surcharge on request: — Position 4.3 Article number: 942.5237 DS software "Overlength" (subsequent steps must be confirmed) Sequence control incl. hardware. When a cutting dimension > max. cutting length of the machine is entered, the cut is made in cycles. (Left unit cuts, right unit moves material and cuts to size.) — Position 2.1 Article number: 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) Incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glazing beads. Function For use on doors and large window sashes, the GMF caliper can be mechanically and securely extended up to a measuring length of 3,000 mm quickly. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Working width 4,500 mm Working height 3,000 mm Bjdpfx Aeyyqnfjkujdd Number of pressing cylinders: 6 pcs. Dimensions (L/W/H): 5,500 x 1,400 x 3,550 mm Weight: 3,000 kg S&S Frame Press Bavaria 2000 L, Year 2026 ----- IMMEDIATE AVAILABILITY from Engelfried stock, 73447 Oberkochen! NEW for Holz-Handwerk 2026 in Nuremberg: Now also with semi-automatic positioning of the vertical pressing cylinders 1, 2, and 3 via enabling button, including ON/OFF selector switch for beam 2. With automatic pressing cycle plus manual control for corner joints (tenon & mortise and dowel/mortised tenon), switchable via selector switch at the control cabinet. Basic equipment included for optional use of counter profiles, in case sash profiles are bent on the loose section. CE version. Basic machine in heavy-duty welded frame construction with thick-walled special hollow sections. Guide rails for pressing beams at the press corners in wear-resistant machined design. Fast, smooth manual width adjustment by ball bearing mounted carriage, locking in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at extra cost). Height adjustment and pressing via long-stroke cylinders in a single work step. Right-hand press corners equipped with integrated horizontal cylinders, eliminating the need for vertical positioning of the horizontal press cylinders and preventing cylinder collisions. Lower abutments adjustable to most convenient loading height in multiple positions. 3 kW compact hydraulic unit with integrated control block, variable pressure control from 20 – 120 bar, includes pressure gauge. Operation by push-buttons with separate control circuits for vertical and horizontal press cylinders, mounted on freely movable operator panel. 2 vertical double-acting press cylinders, stroke adapted to working height, piston diameter 60 mm, max. pressing force per cylinder 2,100 kg 2 horizontal double-acting press cylinders, 80 mm stroke, piston diameter 40 mm, max. pressing force per cylinder 1,250 kg Abutment and pressing plate depth: 100 mm Control cabinet mounted at machine base (left side), 400 Volt, 50 Hz Machine supplied with ready-to-connect 16 A plug Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions (L x H): 4,500 mm x 2,750 mm Note: Actual working dimensions: 4,500 x 3,000 mm (L x H) Space required: 5,600 mm x 1,400 mm x 3,550 mm (L x W x H) Article: Intermediate pressure beam complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm height Note: Actual working height: 3,000 mm Article: Individual pressure regulation for intermediate pressure beam, pressure control range up to max. 100 bar (for pressing cross muntin windows) Article: Infinitely height-adjustable transverse pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article: Individual pressure regulation for transverse pressure device, pressure control range up to max. 100 bar (for pressing cross muntin windows) Article: Shut-off valve on 3rd vertical cylinder Article: Shut-off valve on upper horizontal cylinder Article: Shut-off valve on lower horizontal cylinder

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Pjovimo frezos velenas 2 vnt. Frezu agregatų skaičius: 7 vnt. Veleno skersmuo: 50 mm Valdymas: Weinig PC-Nexus Weinig Uncontrol 12 Su radialiniais ir ašininiais NC velenais bei VARIO stalu ..... Staklės jau profesionaliai išmontuotos ir sandėliuojamos 73447 Oberkochen mieste Techninių duomenų santrauka (papildomai esanti komplektacija – teirautis atskirai) ..... Trumposios pjovimo staklės ..... > Elektroninės trumposios pjovimo staklės, horizontalus reguliavimas be pakopų > Įrankių skaičius: 1 vnt. > Veleno apsukos: 3000-6000 aps./min > Veleno skersmuo: 40 mm > Maks. įrankio skersmuo: 400 mm > Variklio galia: 3,7 kW > Lazerinė pjovimo ruožo žymėjimo sistema > Ašinė reguliavimo eiga: 150 mm, NC ašis, elektrinis bepakopis reguliavimas > Radialinė reguliavimo eiga: pneumatinė, 8 pozicijos, pvz. apčiuopiamas krašto užapvalinimas iš viršaus Kraštų užapvalinimo agregatas ..... > Padėtis: horizontaliai iš apačios > Ašinė reguliavimo eiga drauge su trumposiomis pjovimo staklėmis Elektroninis ilgio ribotuvas ..... > Ilgis: 4500 mm 1. Tekinimo ir pjovimo frezos velenas ..... > Įrankių skaičius: kintamas > Variklio galia: 15 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 640 mm, su atrama > Ašinė reguliavimo eiga: 580 mm, NC ašis, bepakopis > Veleno apsukos: 2.800-4.000 aps./min > Įrankio skersmuo: 380-400 mm > Priešpriešinė atrama, visa tvirtinimo ilgis fiksuojama Bdodpfxjyrtzkj Akusd 2. Tekinimo ir pjovimo frezos velenas ..... > Įrankių skaičius: kintamas > Variklio galia: 15 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 640 mm, su atrama > Ašinė reguliavimo eiga: 580 mm, NC ašis, bepakopis > Veleno apsukos: 2.800-4.000 aps./min > Įrankio skersmuo: 380-400 mm > Priešpriešinė atrama, visa tvirtinimo ilgis fiksuojama Perdavimo juosta ..... Dalių perdavimui į išilginį apdirbimą, įskaitant detalių atskyrimą prieš pateikiant į išilginį apdirbimo skyrių. 1. Profilinė frezos galvutė (lygiagrečiai ir priešpriešiai sukinėjančios) ..... > Padėtis: vertikaliai dešinėje > Įrankių skaičius: kintamas > Variklio galia: 11 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 400 mm, su atrama > Ašinė reguliavimo eiga: 350 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 80 mm, NC ašis, bepakopis > Veleno apsukos: 6000 aps./min > Įrankio skriejimo skersmuo min.: 140 mm > Įrankio skriejimo skersmuo maks.: 232 mm 2. Profilinė frezos galvutė ..... > Padėtis: vertikaliai dešinėje > Įrankių skaičius: kintamas > Variklio galia: 11 kW > Veleno skersmuo: 50 mm > Įrankio tvirtinimo ilgis: 400 mm, su atrama > Ašinė reguliavimo eiga: 350 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 80 mm, NC ašis, bepakopis > Veleno apsukos: 6000 aps./min > Įrankio skriejimo skersmuo min.: 140 mm > Įrankio skriejimo skersmuo maks.: 232 mm 3. Profilinė frezavimo agregatas (įlaidos pjovimo įrenginys iš viršaus) ..... > Padėtis: horizontaliai viršuje > Variklio galia: 3,0 kW > Veleno skersmuo: 40 mm > Įrankio tvirtinimo ilgis: 40 mm > Ašinė reguliavimo eiga: 30 mm, NC ašis, bepakopis > Radialinė reguliavimo eiga: 125 mm, NC ašis, bepakopis > Veleno apsukos: 90...

Būklė: nepatikrintas (naudotas), Grooving spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, plus VARIO table and trimming carriage ..... Machine professionally dismantled and in stock at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical Data Summary (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser guideline for cutting section recognition > Axial adjustment travel: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment travel: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Maximum tool diameter: 130 mm > Axial adjustment mechanically linked to cross-cut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... > Length: 4500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Maximum tool diameter: 400 mm > Anti-spin counter, full clamping length is countered Transfer belt Bedpfx Aex H Al Nskusdd ..... For transferring parts to the longitudinal processing unit, including double-part singulation before infeed into the longitudinal processing. 1st Profiling Spindle (Climb and Counter Direction) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm NC axis, infinitely adjustable > Radial adjustment travel: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory-overhauled by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter bearings, without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remote-controlled with the hood closed. Machine features a continuous, chainless feed unit equipped with rubber rollers. Electric vertical adjustment of the spindles via mechanical digital display (SIKO). Switch for limiting the height adjustment range. Feed roller pressure is pneumatic. Stops and table plates are fixed (not adjustable). Machine has steel table plates. Machine with full enclosure and integrated sound and dust protection, including internal lighting. Electrical configuration according to DIN VDE 0113, electrical equipment for industrial machinery EN 60204, IEC - 204 - 1. Additional electrical standards are not considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before use whether your existing tools are suitable for this speed. Please also keep this in mind when ordering new tools. Technical data Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Horizontal spindle motors each: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping removal bottom: 0.5 mm Bsdpfx Akoxpn Tzjusdd (Technical data according to manufacturer – subject to change without notice!)

Būklė: dilaminuotas dirbtuvėje (naudotas), Slotted Spindle 1 pc Number of Milling Units: 4 pcs Spindle Diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled radially and axially --- The machine was factory-refurbished by Weinig in 2024. During this process, the control system was upgraded to Siemens S7 677 C with a new “touch” membrane panel. Equipped with the following processing units: Crosscut Saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically across 8 positions for edge rounding from above Edge Rounding Unit from Below --- Axial adjustment paired with crosscut saw Tenoning and Mortising Spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm minimum tool cutting circle 380 mm, maximum 400 mm tool clamping length 640 mm axial adjustment CNC axis axial adjustment stroke 580 mm adjustment speed 100 mm/sec 1st Profile Spindle (Conventional and Climb Milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd Profile Spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal Profiling Unit, Upper --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment over 8 positions axially and radially Vertical Profiling Unit, Right at Machine End --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm Bdjdpsxpi Dujfx Akued pneumatic adjustment over 8 positions axially and radially Additional Equipment --- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, incl. positioned crosscut saw integrated into the control Window mullion cutting unit, swivels 60° both sides double-part handling package with automatic singling and transfer feed-in device with window automation for rebating rebate carriage for rebating narrow sash widths climate control unit in the switch cabinet PC control NEXUS automatic turning system lamella conveyor, including return conveyor for transporting workpieces back to the operator (Technical data according to manufacturer – subject to confirmation).

Būklė: dilaminuotas dirbtuvėje (naudotas), Working width: 3,500 mm Working height: 2,550 mm Number of pressing cylinders: 6 pcs. Loading dimensions (L x W x H): 4,500 x 950 x 2,900 mm Hess Speedy Frame Press ----- Will be overhauled Maximum insertion dimension / pressing length: 3,500 mm Maximum insertion dimension / pressing height: 2,550 mm Sliding carriage for width adjustment, locking at 50 mm intervals double-hole grid system Electrically adjustable long-stroke cylinders (hydraulic) Support plate insertion height pre-selectable in 4 positions 3 vertical pressing cylinders, stroke: 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 3 horizontal pressing cylinders, stroke: 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Press plate depth: 100 mm; width: 140 mm Grid for cylinder fixing / support: 50 mm Central pressure beam with shut-off valve Bdsdsxnqw Tepfx Akuod End pressure shut-off and re-pressurization control Control and pressing operation via push-button control mode Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400V 3 pcs. pivoting pressure plates for tilt windows 1 pc. pivoting pressure plate for pointed windows 1 pc. extension for pivoting pressure plate 1 pc. set of small parts Image and video are not original; they show an identical model ----- (Technical data according to manufacturer – subject to change and errors excepted!)

Būklė: paruoštas naudoti (naudotas), Slotting spindle 1 pc. Number of milling units 1 pc. Spindle diameter 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot mortising machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead cutting saw. Price: €4,000 3) Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 Timber window tool set IV 68/78/88 and timber-aluminium window tool set IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7,000 (Hardware conversion available at extra cost on request!) ----- Technical description by manufacturer: - Haberkorn FZS1 slot mortising machine with automatic feed, -Infinitely variable height adjustment D 40 mm Cross-cut saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal positioning: pneumatic, manually adjustable -Safety guard and extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: -Power: 7.5 kW -Speed: 4200 rpm -Usable length: 252 mm -Max. tool diameter: 340 mm -220 mm stroke, infinitely variable height adjustment via precision ball screw spindles -Safety guard and extraction hood with extraction port diameter: 180 mm -Automatic brake with speed monitoring Bdsdoxa Hi Nepfx Akued Tilting table: -Swivel range: +/- 65 degrees -Automatically changing counter-block (programmable) -Pneumatic clamp -Highly accurate electronic angle indicator -Automatic length compensation -Counter-block always remains in the cutting plane for any angle setting Special equipment: -Laser for workpiece positioning -Saw position pneumatic -Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with lift spindle, 3 tools -Extraction connection port 2 x 120 mm -Spindle length: 270 mm -Opposing fence with fine adjustment and turret head -Triple stroke, max. working height: 90 mm -Glazing bead separation saw with safety and extraction hood, diameter 80 mm -8-roller feed unit with stand and hold-down arm, required for set up with glazing bead separation saw -Pneumatically-actuated insertion device for edge gears, speed 6000 rpm -2 x 3 kW motors -Spindle mounting diameter: 30 mm ----- 3) Oertli tooling for the Haberkorn and Okoma machines -1 set timber windows IV 68/78/88 -1 set timber-aluminium windows IV 68/78 Tools are sold in the condition, scope, and with the accessories as available in our warehouse. Note regarding window profiles, tool drawings, and tool system lists: Fa. Engelfried assumes no warranty that the tools actually supplied correspond with the systems listed or illustrated. ----- 4) Götzinger OBM Plus corner hinge and olive drilling machine -Corner and scissor hinge + handle drilling -Drilling unit vertical with: -Quick-change clamping device for drill heads -Pneumatic feed with foot switch -1x olive drilling head 24 mm -1x corner hinge double head -Maco MultiMatic hardware -1x adjustable folding stop, left, with 6 stops -1x adjustable folding stop, right, with 6 stops -1x machine stand complete with shelf -220/400 V, 60 Hz, 1.3 kW -1x roller conveyor approx. 1 m long with 2 rollers -1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of...

Būklė: dilaminuotas dirbtuvėje (naudotas), Working width 3600 mm Working height 2600 mm Number of pressing cylinders 5 pcs. Loading dimensions (L x W x H) 4400 x 1150 x 2970 mm Weight 3000 kg Schafberger + Sprödhuber Frame Press Bavaria ----- Machine will be overhauled by us before delivery With automatic pressing cycle + manual control for corner joints (tenons and mortises) CE version Base machine in heavy-duty welded steel frame construction, using thick-walled special hollow profiles. Guide rails for the pressure beams at the press corners in wear-resistant, precision-machined design. Fast, smooth manual width adjustment via ball-bearing mounted carriage, locking in perforated grid positions. Height adjustment and pressing conducted via long-stroke cylinders in a single working operation. Right-side press corners are equipped with integrated horizontal cylinders, eliminating the need for Bedpfxow T Un Us Akuedd vertical positioning of the horizontal pressing cylinders, effectively preventing cylinder collisions. Lower abutments can be set in multiple positions to optimize insertion height. 3 vertical pressing cylinders, double-acting, stroke adapted to working height, 2 horizontal pressing cylinders, double-acting Abutment and pressure plate depth: 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (L x W x H) Option: ALWA pressing aids for angled windows (Technical data according to manufacturer – subject to change! Illustrations may differ from the original, prices net, plus VAT (domestic))

Būklė: paruoštas naudoti (naudotas), Working width: 3,450 mm Working height: 2,000 mm Number of hydraulic cylinders: 5 pcs Loading dimensions (L x W x H): 3,600 x 1,200 x 2,720 mm Hess Perforated Plate Press "Multipress" Suitable for all types of angled, segment, and arched windows and doors. Also ideal for interior fittings or frame construction. Can be used for gluing block steps in staircase manufacturing and much more. Bdjdpfx Aewqr R Askued Maximum working area: approx. 3,450 x 2,000 mm External dimensions: approx. 3,600 x 1,200 x 2,720 mm The vertical perforated plate press is manufactured with a heavy-duty, torsion-resistant steel construction. Its simple, robust, and cost-effective design ensures long service life. The perforated plate is made of 10 mm thick steel sheet with a 50 mm hole spacing. The hydraulic cylinders and abutments are self-locking. - 5 hand-operated hydraulic cylinders, insertable - Mounted on the perforated plate with integrated pump - 2,000 kp pressure limiting valve - 140 mm pressure plate width - 80 mm pressure plate depth - 60 mm piston stroke 4 fixed individual abutments (Technical data according to manufacturer – subject to confirmation!)

Būklė: nepatikrintas (naudotas), Gamybos metai: 2013, Gręžimo skersmuo, mm Horizontalių gręžimo galvučių skaičius, vnt. Vertikalių gręžimo galvučių skaičius, vnt. 2 vnt. Götzinger gręžimo ir frezavimo centras ----- Parduodama pagal kliento užsakymą! 2 identiškos mašinos: Viena mašina naudota „kairiųjų“ detalių apdirbimui, kita – „dešiniųjų“ detalių apdirbimui. Mašinas galima naudoti ir atskirai. Mašinos buvo valdomos per langų gamybos programinę įrangą, bet galima valdyti ir per pačią mašinos programinę įrangą. Abi mašinos identiškai komplektuotos: - Gręžimo agregatas kairėje ir dešinėje galiniams gręžimams. Bdodpfx Akev N N Spsusd - 3 agregatai gręžimui ir frezavimui išilginiam apdirbimui. - Dalys įdedamos 1 kartą, po to agregatų laikiklis juda prie skirtingų apdirbimo vietų. Mašinos užstatymo ilgis apie 6 m. Galimas pavienis pardavimas: Kaina už vieną mašiną – 10.000 eurų Daugiau informacijos – žr. pridėtus PDF dokumentus.

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: Bdedpev D Rg Djfx Akujd ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: paruoštas naudoti (naudotas), Number of drilling motors: 1 unit Corner bearing drilling: 1=yes, 0=no – 1 yes Olive drilling: 1=yes, 0=no – 1 yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station offers extensive drilling technology for little money, especially designed for craftsmen. It is a complete station for drilling corner bearings and olives, equipped with all essential features such as two clamping cylinders, drilling depth sensing, efficient extraction, stop systems for both corner bearing and olive drilling, drill head with quick-change chuck, adjustable feed speed, and automatic program control. This means optimal technology for perfect results: just one machine with a single drilling unit and a single drill head for two operations. The system: Bdodpfxjvu Hgzs Akusd - Base frame as work wall for sashes and frames up to 100 mm - Centrally positioned drilling unit, height-adjustable manually via threaded spindle - Drill hole position and depth are preset for the given fitting type, and are adjustable for different models via a stop system - Drilling feed speed can be variably adjusted via throttle valve - Direct extraction system - Electro-pneumatic control system with automatic program sequence for: workpiece clamping – drill motor on – drilling unit forward – drilling – drilling unit back – drill motor off – release workpiece clamp - Fixed stop systems Standard equipment / Technical data: Robust base frame as work wall, precise support made from abrasion-resistant and dimensionally stable plastic, for sashes and frames up to 100 mm thick, corner bearing and olive drilling in a single machine and with one drilling unit, easy and convenient vertical operation, simple handling, no templates required, minimal time investment for safe workpiece positioning, guarantees for precise and accurate holes, two clamping cylinders for secure fixation of sash or frame, adjustable for different wood thicknesses, side stop in the rebate for corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for determining drilling height when switching from corner bearing to olive, automatic drill depth sensing for corner bearings and olives, drilling unit with quick-change chuck for different tools for corner bearings and olives, tool changes in seconds, automatic program sequence, clean working environment thanks to efficient extraction, compact size and mobile due to steering/brake castors. Electrical equipment in accordance with VDE standards. Electrical connection: 0.55 kW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4–8 bar Extraction port: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space requirements: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Finish: RAL 7030 Stone grey with RAL 1018 Zinc yellow 1 drill set with 1 drill bit 25 mm and 2 drill bits 10 mm plus 1 additional drill bit with 34 mm diameter (Technical data as provided by manufacturer – subject to change without notice!)

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each Bsdpfxjvu Hgbs Akusdd - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: dilaminuotas dirbtuvėje (naudotas), Lizdų velenas 1 vnt. Frezavimo agregatų skaičius 4 vnt. Veleno skersmuo 50 mm Valdymas Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 su NC velenais ----- Prieš pristatymą mašina bus išvalyta ir pilnai patikrinta Techninių duomenų santrauka (Dėl galimos papildomos komplektacijos prašome teirautis) Poz. 1: Atpjovimo pjūklas ----- > Elektroninis atpjovimo pjūklas, horizontalus, bepakopė reguliacija > Įrankių skaičius: 1 vnt. > Veleno apsukos: 2.800 aps./min > Veleno skersmuo: 40 mm > Didžiausias įrankio skersmuo: 400 mm > Variklio galia: 3,0 kW > Lazerinė linija pjūvio zonai žymėti > NC ilgio ribotuvas, sumontuotas ant lizdų stalo, įskaičiuotas Atpjovimo pjūklo pozicionavimas integruotas valdymo sistemoje. > Ilgis 3500 mm Poz. 2: Špuntas ir lizdų velenas ----- > Įrankių skaičius: kintamas, bepakopė reguliacija NC ašyje > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus poslinkis: kintamas, bepakopė reguliacija 254 mm NC ašyje > Veleno apsukos: 3500 aps./min > Veleno skersmuo: 50 mm > Didžiausias įrankio skersmuo: 320 mm > Variklio galia: 11 kW Poz. 3: 1-asis profiliavimo velenas (vienakryptis ir priešpriešinis) > Pozicija: vertikalus dešinėje > Įrankių skaičius: 1 vnt. > Įrankio tvirtinimo ilgis: 120 mm > Veleno apsukos: 6000 aps./min > Veleno skersmuo: 50 mm > Didžiausias įrankio skersmuo: 232 mm > Variklio galia: 7,5 kW Poz. 4: 2-asis profiliavimo velenas ----- > Pozicija: vertikalus dešinėje > Įrankių skaičius: kintamas, bepakopė reguliacija NC ašyje > Įrankio tvirtinimo ilgis: 320 mm > Veleno vertikalus poslinkis: kintamas, bepakopė reguliacija 254 mm NC ašyje > Veleno apsukos: 6000 aps./min > Veleno skersmuo: 50 mm > Didžiausias įrankio skersmuo: 232 mm > Variklio galia: 11 kW 2 padavimo volai priešais veleną, ašinio reguliavimo pneumatinis valdymas, 2 pozicijos Siju vadovas sudarytas iš: Kreipiančio liniuotės atramoje (prie vienakrypčio veleno), Viršutinės sijų atraminės juostos profiliavimo agregato vertikalioje dešinėje ir profiliavimo veleno zonoje. Poz. 5: Profilinio frezavimo agregatas, horizontalus viršuje ----- > Tvirtinimo ilgis: 40 mm > Veleno skersmuo: 40 mm > Variklio galia: 3,0 kW > Apsukos: 5.850 aps./min > Didžiausias įrankio skersmuo: 130 mm > Ašinė reguliavimo eiga 30 mm, 8 pozicijos su pneumatinio revolverio pagalba > Radialinė reguliavimo eiga 125 mm, 8 pozicijos su pneumatinio revolverio pagalba Poz. 6: 3-asis profiliavimo velenas (furnitūros velenas) ----- > Pozicija: vertikalus dešinėje > Įrankio tvirtinimo ilgis: 160 mm > Ašinė reguliavimo eiga 115 mm, 8 pozicijos su pneumatinio revolverio pagalba > Radialinė reguliavimo eiga 100 mm, 8 pozicijos su pneumatinio revolverio pagalba > Veleno apsukos: 5.850 aps./min > Veleno skersmuo: 40 mm > Didžiausias įrankio skersmuo: 210 mm > Variklio galia: 3,0 kW Papildomos savybės ----- > Prijungiama prie interneto > Atvartų be atplaišų įranga > Dvigubas detalių komplektas > Grąžinimo įrenginys vieno žmogaus valdymui: pasukamas konvejerio stalas > Ekrano valdymas > Kreivų langų gamybos įranga > Elektroninis kampo indikavimas kreiviems langams > Pramoninis kompiuteris, PC valdymas/NEXUS > Weinig gamybos programos > Be apdirbimo įrankių Originalių nuotraukų dar nėra. Nuotraukos rodo identišką mašiną iš mūsų archyvo ----- Nurodytos mašinos kaina pagal užklausą! ----- Bdodpfsvu Hfqox Akujd Papildomos įrangos kaina: 6.500,00 Eur + PVM

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Variklių skaičius: 1 vnt. Darbinis ilgis: 2500 mm Valdymas: nėra Vientisinė stiklo tašų pjovimo staklė Hecht ES 350 ----- Pasukimas pneumatinis, į fiksatorius. 45º/90º/135º Pneumatinis pjūklo disko pastūma Pneumatinis pasukimas per rankinį fiksatorių Su staklių pagrindu, pneumatinis prispaudimas Pjūklo diskas HM 350 x 3,0/2,2/30 Z 100 Pjovimo stovo matmenys: ilgis 700 mm, plotis 1 600 mm, aukštis 1 500 mm Jutiklinis ribotuvas 1,5 m Atrama 1,5 m su laikikliu Jutiklinis ribotuvas 3 m Atramos prailginimas nuo 1,5 m iki 3 m su laikikliu Stalo įdėklai su grioveliais įleistoms stiklo tašoms Bedpevpr N Rjfx Akuedd HECHT ASB rankinis ilgio ribotuvas su skaitmeniniu ekranu, 2500 mm Su ištraukimo įrenginiu (Techniniai duomenys pagal gamintoją, be garantijos!)

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment Bodpst Tqy Esfx Akusdd - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Pjovimo velenas 2 vnt. Frezuojančių agregatų skaičius: 7 vnt. Veleno skersmuo: 50 mm Valdymas: Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Parduodama pagal kliento užsakymą. Įrenginys prijungtas ir galima demonstracija. Įskaičiuoti naudoti langų įrankiai Unicontrol 12, OERTLI, įvairūs medienos storio pasirinkimai ----- Trumpa santrauka: ----- - 2 CNC valdomi pjovimo velenai, kiekvienas po 640 mm ilgio - Variotisch - 3 CNC valdomi profiliavimo velenai, kiekvienas po 400 mm ilgio - Baldų furnitūros velenas ir griovelio agregatai viršuje ir apačioje - Įskaičiuoti naudoti langų įrankiai Unicontrol 12, OERTLI, įvairūs medienos storio pasirinkimai ir įdiegtos sistemos (žr. pridedamą PDF) Išsamus aprašymas: ----- Trumpoji pjūklas ----- Elektroninis trumpoji pjūklas, horizontaliai bepakopiai reguliuojama Įrankių skaičius: 1 vnt. Veleno sukimosi greitis: 3000–6000 aps./min. Veleno skersmuo: 40 mm Didžiausias įrankio skersmuo: 400 mm Variklio galia: 3 kW Lazerinė linija pjūvio vietai parodyti Suapvalinimo agregatas ----- Padėtis: horizontaliai apačioje Variklio galia: 1 kW Veleno skersmuo: 20 mm Veleno sukimosi greitis: 9000 aps./min. Didžiausias įrankio skriejimo ratas: 130 mm elektroninis ilgio ribotuvas, ilgis: 3500 mm ----- 1. Įrutės ir pjovimo velenas ----- Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 640 mm Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 2800–4000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skersmuo: 380 mm Variklio galia: 15 kW Bsdpfx Aksyyqm Iouedd 2. Įrutės ir pjovimo velenas ----- Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 640 mm Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 2800–4000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skersmuo: 380 mm Variklio galia: 15 kW 1. Profiliavimo velenas ----- Padėtis: vertikaliai dešinėje Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 400 mm su viršiniu guoliu Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno horizontalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 6000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skriejimo ratas: 232 mm Variklio galia: 11 kW 2. Profiliavimo velenas ----- Padėtis: vertikaliai dešinėje Įrankių skaičius: kintamas, CNC valdomas Įrankio tvirtinimo ilgis: 400 mm su viršiniu guoliu Veleno vertikalus ėjimas: kintamas, CNC valdomas Veleno horizontalus ėjimas: kintamas, CNC valdomas Veleno sukimosi greitis: 6000 aps./min. Veleno skersmuo: 50 mm Didžiausias įrankio skriejimo ratas: 232 mm Variklio galia: 11 kW 3. Profiliavimo velenas ----- ...