Langų sistema

WEINIG Unicontrol 12 NC

Sąlyga: naudotas, Slotting spindle 1 unit Number of milling units: 5 pcs Spindle diameter: 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and tenoning carriage ..... Machine still in operation, available for viewing! Optionally available with used tools and window construction software for data transfer to the Unicontrol 12! Technical Data Overview (Please inquire about any additionally included accessories) ..... Crosscut saw ..... > Crosscut saw, electronic, horizontal infinitely variable adjustment > Number of tools: 1 pc > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light to identify the cut section > Axial adjustment travel: 150 mm NC axis, electronically infinitely variable > Radial adjustment: pneumatic, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal, lower > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with the crosscut saw > Radial adjustment pneumatically controlled On/Off electronic length stop ..... Bjdpfx Absxwdv Iefjcu > Length: 4,100 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with outboard bearing > Axial adjustment travel: 580 mm NC axis, infinitely variable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counterhold, entire clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-piece separation before entry into the longitudinal processing. 1st Profiling spindle (climb and conventional milling) ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with outboard bearing > Axial adjustment travel: 350 mm NC axis, infinitely variable > Radial adjustment travel: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Minimum tool circle: 140 mm > Maximum tool circle: 232 mm > 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions 2nd Profile milling unit (grooving device from above) ..... > Position: horizontal, upper > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment travel: 30 mm, 8 positions > Radial adjustment travel: 125 mm, 8-position turret > Spindle speed: 9,000 rpm > Maximum tool circle: 130 mm 3rd Profiling spindle ..... > Position: vertical, right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with outboard bearing > Axial adjustment travel: 350 mm NC axis, infinitely variable > Radial adjustment travel: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Minimum tool circle: 140 mm > Maximum tool circle: ...

Sąlyga: naudotas, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for Sale – Reliable Industrial Biomass Technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for larger facilities, sites, grain dryers, or central heating systems. Main features: 🌲 Fuel types: Wood chips, pellets, biomass – wide fuel versatility ⚡ 300 kW heating capacity – reliable and efficient for heavy-duty applications 🔄 Automatic feeding, combustion control, ash removal – minimal labor required 🧠 Modern controls, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: EUR 9,900 – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent. Bcjdep Am Rgjpfx Abfeu

Sąlyga: naudotas, Techniniai duomenys: Srovės sunaudojimas: 350 A Bendras galios poreikis: 17,5 kVA Mašinos svoris apie: 64 kg Mašinos matmenys: 0,65 x 0,32 x 0,5 m Suvirinimo lygintuvo/inverteris MIG/MAG: 40A / 14V iki 350A / 31,5 V TIG: 10A / 10V iki 350 A Rankinis lankinis suvirinimas: 15A / 20,5V iki 350A / 34V Įtampa U1: 380 - 415V Vėsinimo tipas: F (vandens aušinimas) Apsaugos klasė: IP 23 Bcodpfeu Nwd Djx Abfsu be žarnų paketo be masės kabelio

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza Bcedpsmgc I Nefx Abfsu - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, mašinos/transporto priemonės numeris: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services. Bcjdpsuc Tzvjfx Abfeu

Sąlyga: naudotas, Technical details: Welding current: 500 A Approximate machine weight: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Display for welding current with 2-/4-stroke switch, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Torch package: 4.0 m length Bcedpfxsvz Abhe Abfeu Torch head: gas-cooled Ground clamp with 4.7 m ground cable Wire feed: 4-roller drive with wire diameter for 1.0/1.2 mm

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Bcjdpfsvwfqqjx Abfju Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Sąlyga: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment Bsdevu Hfqopfx Abfecu > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Load capacity: 5 t Span: 21,000 mm Lifting speed: 8.0 m/min Creeping speed: 0.8 m/min Rope diameter: 14 mm Connected load: 10.2 kW SINGLE-GIRDER SUSPENSION CRANE Bcedpfx Abju Nvg Djfsu Crane classification according to DIN 15018 H2 B3 Crane travelling gear: Designation RF 400; Type KBF 100 A8/2, travel speed 12.5 / 50.0 m/min, and type KBF 71 A2, travel speed 2.5 m/min. Wheel diameter Ø 170 mm (16 pieces) Main hoist trolley EKDH 525 H12 KV3-2/1 F10; Type KBV 71 B8/2; speed 20.0 / 5.0 m/min; wheel diameter Ø 125 mm (4 pieces) Hoisting unit: Type KBH 125 B4; lifting height 12,000 mm; with brake and trolley runner; lifting speed (main lift 8.0 m/min, creeping lift 0.8 m/min) Single hook size 2.5 Rope Ø 14 mm; rope length 28.3 m; mechanism group FEM 1 AM Operation via pendant pushbutton control with DST Special feature: Transfer unit with locking mechanism and branch tracks + infrared Additional bridge cranes with a 21-meter span available for sale.

Gamybos metai: 2004, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Root-end reducer B&Z type WRP SO Bcsdpfswavymox Abfou Well-maintained, fully functional root-end/stem thickness reducer, make: Baljer und Zembrod. Year of manufacture: 2004. Complete with control system, straight and inclined scraper conveyor for waste removal. Includes log ejector. Complete steel substructure. Milling shaft length: 1,380 mm. Milling shaft driven by 75 kW motor. Feed motor for rotary mechanism.