Liejimo mašinos su užspaudimo jėga 1 000 - 4 999 kN pirkti naudotą (503)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of manufacture: 1998 Injection unit: Screw diameter: 30 mm Shot weight: approx. 85 g Injection pressure: 2298 bar Iiodpfxozc Nrmo Afnjd Metering volume: 99 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Platen size: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface 4x hydraulic core puller Control system with hot runner zones Injection unit is wear-resistant and corrosion-resistant Screw diameter in vertical injection unit: ⌀25 mm – approx. 43 g/PS The machine has been regularly serviced Recently, the service center replaced the machine's cylinder with screw and the hydraulic valves with new components Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to attend technical live tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, BOY 100E / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 32 mm Shot weight: 92.3 g Injection pressure: 2127 bar Dosage volume: 96.5 cm³ Clamping Unit: Clamping force: 100 t Tie bar spacing: 430 x 360 mm Platen size: 750 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 2 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Injection unit hardened - bimetallic Main drive motor - servo motor driven by inverter - energy-saving Dimensions: Weight: 3,530 kg (L x W x H): 4.37 x 1.21 x 2.20 m Drive: Pump/Motor: 15 kW Isdszc Nr Tepfx Afneid Heating capacity: 7.7 kW Total power: 22.7 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Battenfeld EcoPower SE 300/1330 / Electric Injection Molding Machine Year of manufacture: 2012 Injection Unit: Screw diameter: 50 mm Shot weight: 491.4 g Injection pressure: 2470 bar Plasticizing volume: 540 cc Clamping Unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Platen size: 1090x1170 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 - Touchscreen Additional Features: Electric machine: high-speed, energy-efficient, and very quiet Machine is in very good technical condition Euromap 67 Robot interface Air valve x 8 Control system for hot runner x6 Hardened injection unit – bimetallic Parallel movements It is possible to change the screw diameter to 45, 55, or 65 mm Dimensions: Weight: 14,100 kg Length/Width/Height: 7.20x2.04x2.20 m Drive: Pump/Motor: 0 kW Isdpfxjzc Ntkj Afnsid Heating capacity: 22 kW Total connected load: 0 kW All machines offered are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine is available upon request, or you can participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric Injection Moulding Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2,083 bar Dosage volume: 168 cc Clamping unit: Clamping force: 110 t Tie bar distance: 470x420 mm Platen size: 682x682 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B8 - touchscreen Iijdezc Nuzopfx Afnsd Additional equipment: Machine in very good technical condition All-electric machine: energy-saving and exceptionally quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Heater control with hot runner capability Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in a live technical test at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of Manufacture: 2018 Injection Unit: Screw diameter: 80 mm Shot weight: 1,464 g Injection pressure: 1,855 bar Metering volume: 1,608 cm³ Clamping Unit: Clamping force: 400 t Tie bar spacing: 920 x 830 mm Platen size: 1,280 x 1,240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 - Touchscreen Additional Equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. mold installation height: 400/900 mm Air valves x 4 Hydraulic core pull x 4 Hot runner control x 36 zones Self-sealing nozzle x 10 Injection unit hardened - bimetallic Proportional valve on the injection unit – precise injection Automatic upper tie bar withdrawal function Machine has been regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 Robot Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes are servo-driven (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt, and safety housing Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 22,650 kg L x W x H: 7.58 x 2.73 x 2.32 m All offered machines are started up by our service technicians prior to sale. Isdpfszc Nx Hox Afnsid A video of the technical inspection of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Engel e-max 440/180 / All-Electric Injection Moulding Machine Year of Manufacture: 2009 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Dosage volume: 220 ccm Clamping Unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional Equipment: Machine in very good technical condition, used in a clean production environment All-electric machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface Air valve x 3 Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure control Original mold crane Dimensions: Iiodezc Nz Ijpfx Afnod Weight: 7200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 420C 1000-350/150 / Gamybos linija su šoniniu Arburg Multilift H robotu / 2K mašina Pagaminimo metai: 2009 m. spalio mėn. Įpurškimo agregatas: Isdjzc N Etopfx Afnsid Sraigto skersmuo: 45 mm Įpurškimo svoris: 210 g Įpurškimo slėgis: 1670 bar Dozavimo tūris: 230 ccm Uždarymo agregatas: Uždarymo jėga: 100 t Kolonų atstumas: 420x420 mm Plokščių dydis: 570x570 mm Išstūmiklis: hidraulinis Uždarymo agregatas: hidraulinis Valdymas: SELOGICA Papildoma įranga: Gamybos linija su šoniniu Arburg Multilift H robotu 2K mašina su pasukamu stalu Valdymas su oro vožtuvu Hidraulinis šerdies ištraukimas x 2 Valdymas su karštųjų kanalų sistema Sustiprinti įpurškimo agregatai – bimetalas Proporciniai vožtuvai įpurškimo agregatuose – itin tikslus įpurškimas Vertikalus įpurškimo agregatas – sraigto skersmuo: ⌀30 mm – 71 g/PS Pasukamas stalas už papildomą kainą Šoninis Arburg Multilift H robotas Pagaminimo metai: 2009 5 ašių robotas: Z ašis varoma servovarikliu (elektrinė), X-, Y-, B- ir C-ašys pneumatiniu būdu Roboto saugos paketas Robotas su adapteriu, konvejeriu, apsauginiu gaubtu Roboto ir konvejerio įsigijimas už papildomą kainą Matmenys: Svoris: 5210 kg Visos siūlomos mašinos prieš pardavimą paleidžiamos mūsų technikų. Galima gauti pasirinktos įrangos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose tiesioginiuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausą

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Shot weight: 427 g Injection pressure: 1440 bar Dosage volume: 508 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total connected load: 44.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request Isdpfxjzc N Nfe Afneid

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520H 1500-800 e² / Hybrid Injection Moulding Machine / Production Line with Side-entry Arburg Multilift H Robot Iisdjzc N R Aspfx Afned Year of Manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping system: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high speed, energy-efficient, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter – energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder/nitrogen accumulator (additional charge for high-speed operation) Central lubrication Automatic mould height adjustment Kistler sensor – mould pressure monitoring The injection moulding machine was operated in a so-called "cleaning room", equipped with additional protection against contamination as well as two vapour absorbers Side-entry Arburg Multilift H robot Year of manufacture: 2012 5-axis robot: Z-axis servo-driven (electric); X, Y, and B axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electrically adjustable height, protective enclosure Robot and conveyor belt available at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m All listed machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09/2011 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Iiodpfx Afszc N Tkjnod Dosage volume: 144 cm³ Clamping Unit: Clamping force: 160 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: 2-component injection moulding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pullers controlled by proportional valve x 2 Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Machine with two cylinders / batteries with compressed nitrogen (additional charging for high-speed operation) Parallel movements Screw diameter vertical injection unit: ⌀25 mm - 45 g/PS Original rotary table Rotary table available for purchase at extra cost Wittmann W823 Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); C-axis and A-movement Travel ranges per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Safety package for robot Robot with adapter, protective housing Robot available for purchase at extra cost Dimensions: Weight: 6720 kg Length/Width/Height: 4.41x1.84x3.20 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Ferromatik Milacron K-TEC 350-2650 / Gamybos linija su Sepro robotu Pagaminimo metai: 2017 Liejamasis mazgas: Sraigto skersmuo: 70 mm Įpurškimo svoris: 1104 g Įpurškimo slėgis: 2175 bar Dozavimo tūris: 1213 ccm Spaudimo mazgas: Spaudimo jėga: 350 t Kolonų atstumas: 750x750 mm Plokščių matmenys: 1110x1165 mm Išstūmiklis: hidraulinis Spaudimo mazgas: hidraulinis Valdymas: MOSAIC – lietimui jautrus ekranas Papildoma įranga: Labai gera techninė būklė Greitaeigė mašina Darbo valandų skaičius: apie 10 000 h automatiniame režime Euromap 67 Roboto sąsaja Oro vožtuvas x 5 Hidraulinis branduolio ištraukimas x 3 Karštųjų kanalų valdymas Įpurškimo agregatas grūdintas – bimetalinis Proporcinis vožtuvas įpurškimo mazge – tiksli įpurškimo kontrolė Paralelūs judesiai Mašina su cilindru / akumuliatoriumi su suslėgtu azotu (papildomas užtaisas greitam darbui) Energiją taupanti mašina – turi 3 kintamo našumo hidraulines pompas Mašina reguliariai prižiūrėta įgalioto serviso Vokietijoje Matmenys: Svoris: 22000 kg Iijdpfxszc Nr Ho Afnod Ilgis / plotis / aukštis: 8,62x2,21x2,80 m Visos siūlomos mašinos prieš parduodant paleidžiamos mūsų technikų. Galima gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose bandymuose tiesiogiai mūsų įmonėje Lodzėje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Battenfeld HM 300/2250S with Wittmann W818 Robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of manufacture: 2007 Injection Unit: Screw diameter: 55 mm Shot weight: 702.5 g Injection pressure: 2500 bar Dosage volume: 772 ccm Clamping Unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Platen size: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and corrosion-proof Proportional valve on the injection unit – precise injection The machine is equipped with a new original screw and barrel Wittmann W818 Robot 4-axis high-speed robot: 3 axes driven by servo motors (electric); A and C movement Touch control panel Robot with adapter, safety enclosure Dimensions: Weight: 13,000 kg Length/Width/Height: 6.90x1.90x2.40 m Drive: Pump/motor: 45 kW Heating power: 22.7 kW Total power: 67.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request Isdpfxozc Ntqe Afnoid

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Injection Moulding Machine / Operating Hours: approx. 16,000 in automatic mode Year of Manufacture: 2017 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Iiedpfx Afjzc Nuuoned Metering volume: 169 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping mechanism: toggle lever Control: UNILOG B8 – Touchscreen Additional Equipment: - Excellent technical condition - All-electric machine: high-speed, energy-efficient, and very quiet - Operating hours: approx. 16,000 in automatic mode - Euromap 67 - Robot interface - Control with pneumatic valve - Hydraulic core pull x 1 - Hot runner control - Injection unit is wear-resistant and corrosion-proof - Central lubrication - Automatic mold height adjustment - Parallel movements - The machine has been serviced in Germany Wittmann W818 Robot Year of Manufacture: 2015 4-axis robot: 3 axes are electrically driven by servo motors; C-axis – pneumatic Travel distances by axis: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91x1.42x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1,877 bar Dosage volume: 1,077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630 x 630 mm Platen size: 995 x 1,050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Injection unit hardened - bimetallic Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Ijdozc Nw Aepfx Afnoid Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by electric servomotors (X, Y, Z, B); C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50 x 2.20 x 2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Arburg 420C 1300-675 with Star sprue picker Year of manufacture: 2002 Injection unit: Screw diameter: 50 mm Shot weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Platen size: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Iedpfszc N H Rex Afnjid Injection unit hardened - bimetal Type of injection unit: Vario – This allows, for example, the use of the injection unit for side injection Covers on the operator side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pump/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Arburg 470C 1500-400 with Wittmann W721 Robot Year of manufacture: 12/2006 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping system: hydraulic Control: SELOGICA - Touchscreen Additional Equipment: Iiedpfx Afjzc N Iujnsd Euromap 67 Robot interface Control with air valve 1x hydraulic core pull Injection unit hardened - bimetallic Integrated conveyor belt and sorting flap Wittmann W721 robot Year: 2006 4-axis robot: 3 axes are driven by servo motors (electric); C-axis - pneumatic Axis travel (mm): X-550, Y-1200, Z-3000 Touch control panel Robot safety package Robot with adapter Robot purchase at additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All machines on offer are started up by our service technicians prior to sale. A video of the technical tests of the machine selected can be provided or you can participate in live technical tests at our premises in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main drive of the machine – servo motor powered by inverter – energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery filled with compressed nitrogen (additional charge for high-speed operation) Central lubrication Parallel movements Iedpfx Aezc N R Nsfnoid Priamus sensor – mold pressure control Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to attend live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of Manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Control system with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine - servo motor driven with inverter - energy saving The injection unit is powered by a servo motor controlled by an inverter Machine equipped with a compressed nitrogen cylinder/battery (additional charge for fast operation) Central lubrication Iijdpszc N Syofx Afnsd Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleaning room" and has additional safety features against contamination and two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Krauss Maffei KM 130-750 CX Metų gamyba: 2010 Liejimo agregatas: Sraigto skersmuo: 40 mm Liejimo svoris: 228 g Liejimo slėgis: 2500 bar Dozavimo tūris: 251 ccm Spaudimo agregatas: Spaudimo jėga: 130 t Kolonų tarpai: 470x470 mm Tvirtinimo plokščių dydis: 745x770 mm Išmetiklis: hidraulinis Spaudimo agregatas: hidraulinis Valdymas: MC5 Papildoma įranga: Euromap 67 Roboto sąsaja Hidraulinis branduolio ištraukimas x 1 Oro branduolio ištraukimas x 6 Valdymas su karštais kanalais x 18 Sustiprintas – bimetalinis liejimo agregatas Proporcinis vožtuvas purkštuvų agregate – tiksli įpurškimo kontrolė Matmenys: Svoris: 9000 kg Isdpjzc Nwpjfx Afnoid Ilgis/plotis/aukštis: 4,90x1,60x2,10 m Visos siūlomos mašinos prieš parduodant paleidžiamos mūsų serviso technikų. Galima gauti pasirinktos mašinos techninio testavimo vaizdo įrašą arba dalyvauti techniniuose tiesioginiuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausimą

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dose volume: 679 ccm Clamping unit: Clamping force: 200 t Tie-bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Isdpfszc Nwvox Afnjid Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull x 3 Air core pull x 3 Hot runner control with 10 zones Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system of 3 variable-displacement hydraulic pumps Parallel movements Proportional valve on the injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Safety package for robot Robot complete with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical inspection of the selected machine or to participate in a live technical demonstration at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dosage volume: 201 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Iiodpfszc Nykox Afnsd Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-barless machine Hydraulic core pull x 1 Hardened injection unit – bimetallic Machine was serviced by Engel authorized service Machine with original safety housing for robot and conveyor belt Dimensions: Weight: 7,400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Engel Victory 330H/80V/160 Combi Ecodrive / Production Line with Sepro SR S5-25 S3 Trans Robot / Operating Hours: approx. 18,000 h in automatic mode Year of manufacture: 2013 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2385 bar Dosage volume: 113 ccm Clamping Unit: Clamping force: 160 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total operating hours: 24,312 h Euromap 67 Robot interface Air valves x 5 Hydraulic core pulls x 5 Control with hot runner circuits x 16 Reinforced injection units – bimetal Main drives - 2 x servo motors with inverter control Proportional valves on injection units - precise injection Screw diameter in vertical injection unit: ⌀22 mm - approx. 28 g/PS Option to purchase a rotary table Sepro SR S5-25 S3 Trans Robot Year of manufacture: 2013 Iisdpfx Aezc Nywjfned 3-axis robot: 3 axes electrically driven by servo motors: X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel Safety package for robot Robot with adapter and safety enclosure Robot can be purchased at extra cost Dimensions: Weight: 8,700 kg Length/Width/Height: 5.35x1.76x3.42 m All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine / Operating Hours: approx. 10,000 h in Automatic Mode Year of Manufacture: 2021 Injection Unit: Screw Diameter: 70 mm Injection Weight: approx. 1,100 g Injection Pressure: 2,000 bar Dosage Volume: 1,212 ccm Isdpfx Aezc N Aljfnjid Clamping Unit: Clamping Force: 260 t Tie Bar Distance: 0x0 mm Platen Size: 1,100 x 1,000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 300 - touchscreen Additional Equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air valve x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main motor - servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - mould pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: 6 axes driven by servo motors (electric): X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt and safety housing Optional purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: on request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1x air valve Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 Robot Year of manufacture: 2007 4-axis robot: 3 axes with servo motors (electric); C axis Travel range of axes: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Iodpfx Afjzc N I Uenjid Robot with adapter Purchase of the robot at an additional charge Dimensions: Weight: 4,900 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating: 9.7 kW Total power: 28.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Iiedpfxszc N Nls Afnjd Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request