Perforavimo staklės su pravažiavimu pirkti naudotą (67)

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Ksdsgwbbqopfx Af Isdg Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Sąlyga: labai geros būklės (naudotas), CNC-controlled Flexible Automatic Throughfeed Boring and Dowel Insertion Line Min/Max Workpiece (Panel) Width (X-axis) with FTT: 240 / 3100 mm Min/Max Workpiece (Panel) Thickness (Z-axis) with FTT: 12 / 60 mm Min/Max Workpiece (Panel) Length-Depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading Station (Double Gantry Loader) "RBO" Model Advantage C B) Skewed Roller Conveyor "RBO" with Workpiece Rotation Device (Longitudinal-Crosswise) 90° C) Portal CNC-controlled Dowel Hole Boring Machine "BIESSE" FTT 800 Center A: No. 2 Electrospindles ISO 30 (each 3.7 kW) with tool holder magazine, each with 3 positions. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Turret) with 56 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) Kjdpsgvdkgsfx Af Isdg D) Transfer Conveyor with Turner (180° top-side down) "RBO" Model Ribaltatore E) Portal CNC-controlled Dowel Hole Boring and Dowel Insertion Machine "BIESSE" FTT 800 R8 No. 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: No. 2 Electrospindles ISO 30 (each 4.5 kW) with 3 tool holder magazines each. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Chain) with 60 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD Dowel Insertion Unit No. 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking Station (Double Portal Station) "RBO" Model Advantage SC

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Kjdjgk T Ttjpfx Af Isdg Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Sąlyga: labai geros būklės (naudotas), Electronic control unit RT 483 Kdjdpfsfz Nanex Af Iog No. 2 motorized throughfeed conveyor belts Feed rate (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 endless screws for chip extraction Digital display for position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), Electronic Programmer NC 400 Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Ksdolwqrtjpfx Af Iedg Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Sąlyga: labai geros būklės (naudotas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Number of spindles per horizontal drilling unit: 20 Maximum working width (mm): 3200 Minimum working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW): The CNC control manages the movement (X-axis) of horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops Kdsdpfx Aferm Ik Tj Iog The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC control No. 2 through-feed motorised belts, feed rate up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads of 1.8 HP each and 22 drilling spindles each); No. 5 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 3 upper drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 5 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal. PC control, type CNI. O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 through-feed motorised belts, feed rate up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal supports – gluing and dowel insertion tools) Kedsw Uhbkopfx Af Isdg No. 2 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 2 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, CNC Flexible Gantry Machine Horizontal Throughfeed Table Control System: Power Control Open powerTouch, Software: WoodWOP (TAPIO ready) Infeed Table (Panel Support) + Outfeed Table (Panel Support) Panel feed by 3 transport belts Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special lateral guide system for workpieces with "sensitive" edges Kjdpfox Aqi Eox Af Iodg 3 upper vertical hold-down devices Powered conveyor belt for waste disposal Integrated electrical and control cabinet Total installed power (kW): approximately 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 Drilling supports V15 (4 x 2.3 kW) each with 15 vertical spindles (total 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 Drilling supports V32 (6 x 2.3 kW) each with 32 vertical spindles (total 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 Drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW Kdoded Nuwispfx Af Ieg No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) CNC-controlled movement (X-axis) of the horizontal drilling supports CNC-controlled movement (Y-axis) of the stops

Sąlyga: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Kdjdpfx Afeh Ryhns Isg Control system: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Sąlyga: visiškai atnaujintas (naudotas), PC control Power Control software No. 2 through-feed motorized conveyors No. 2 horizontal drilling supports (digital display of position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 Kdjdovhcbzopfx Af Isg No. 6 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 50 / 60 (approx.)

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction Kodpfx Aou Tp Slof Iedg 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) Kjdpfx Asw Ug A Hsf Iedg - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema - Bendra instaliuota galia: apie 5 kW.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); Kdedpfxst Ig A So Af Isg - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), PC control: Power Control Software: TOPDRILL BST 500 No. 2 motorized through-feed conveyors No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Ksdpfxjivawpe Af Isdg Total connected load (kW): 20

Sąlyga: labai geros būklės (naudotas), Flexible CNC-Processing line for drilling, milling, and fitting of hardware. Numerical control system: "TPA Albatros." Comprising: Kdjdpfxohvagks Af Isg 1) "Igel" loader, with 12 positions (for 12 panels), vertical panel feed. 2) CNC-Boring machine, Pantograph model Over 25.13 with insertion unit (bushings, shelf supports, and base fittings). - 1 working head (approx. 5.5 kW) with turret (10 positions) - 1 drilling head with 24 independent spindles (X-axis) - 1 boring head with 2 independent spindles (Y-axis) - 1 drilling head with 5 independent spindles (Z-axis) - 1 hardware insertion unit (screwing) - 1 hardware insertion unit (press-fit) - 1 supply and feed hopper 3) Discharge unit (90° transfer) with motorized conveyor for vertical panel outfeed. 4) Discharge unit (0°-90°), with motorized conveyor for bringing the panel from vertical to horizontal position.

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support Kjdpeidqd Tofx Af Iedg No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 Kjdpfxoidqf Rj Af Iodg No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: Kedpfxsvnq Txs Af Iedg W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops Kdedehvi Duopfx Af Iog CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Kdsdpfx Afoi D D Tfj Isg Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: labai geros būklės (naudotas), Flexible N.C. Automatiklinie zum Bohren, Fräsen und Einpressen von Beschlägen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel (Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC Modell Vektor XK 40-13 KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichband mit 90° Umlenkung auf einem Rollentisch KZ2054) Rollenförderer mit ebenfalls motorisierten Bändern (zum Bewegen der Platten um 180° zu den Montagelinien) Kdsdjidmkropfx Af Ijg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, I am selling a through-feed drilling machine HOMAG BST440/30/D, year of manufacture 1997. Configuration: 4+4 bottom-mounted drilling units 1+1 lateral drilling units with 24-spindle heads / 32 mm pitch Kodpfxjt Nddpj Af Ijdg 0 rear-mounted drilling units 2+2 top-mounted drilling units 4 material pressure units from above Very good condition. Available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, I am selling a Rilesa Rapid 1500 through-feed drilling machine, year of manufacture 2012. Maximum working width: 1500 mm Configuration: Kodot Rrn Eepfx Af Isdg 1+1 side-mounted motors 3 top-mounted motors Infeed magazine for elements. Return conveyor system that transports the elements back to the operator. Very good condition. Available immediately.

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), I am selling a drilling machine with milling units COMEC FM0V8 2000, year of manufacture 1997. Kdjdpoh H S Hwjfx Af Ijg Maximum working width: 2000 mm Configuration: - 0 motors from below - 1+1 motors from the sides / angle adjustable - 2 motors from behind / head angle adjustable - 3 motors from above / head angle adjustable - 4 pcs. material hold-down clamps from above - 2 pcs. crosscut saws from above / head angle adjustable - Atypical 5-spindle drilling heads including 3 x 15mm / 2 x 25mm. - Dowel heads included in the price. Very good condition. Immediately available.